Subscriber access provided by UNIVERSITY OF MICHIGAN LIBRARY
Article
Four specific hapten conformations dominating antibody specificity: quantitative structure-activity relationship analysis for quinolone immunoassay Jiahong Chen, Lanteng Wang, Lanlan Lu, Xing Shen, Xinan Huang, Yingju Liu, Xiulan Sun, Zhanhui Wang, Sergei Alexandrovich Eremin, Yuanming Sun, Zhenlin Xu, and Hongtao Lei Anal. Chem., Just Accepted Manuscript • Publication Date (Web): 17 May 2017 Downloaded from http://pubs.acs.org on May 18, 2017
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
Analytical Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
1
Four specific hapten conformations dominating antibody
2
specificity: quantitative structure-activity relationship analysis
3
for quinolone immunoassay
4 5
Jiahong Chena#, Lanteng Wanga#, Lanlan Lua, Xing Shena, Xin-an Huangb, Yingju Liuc,
6
Xiulan Sund, Zhanhui Wange, Sergei Alexandrovich Ereminf, Yuanming Suna, Zhenlin
7
Xua, Hongtao Leia*
8 9
a
Guangdong Provincial Key Laboratory of Food Quality and Safety, South China Agricultural
10
University, Guangzhou 510642, China
11
b
12
Guangzhou University of Chinese Medicine, Guangzhou 510405, China
13
c
14
University, Guangzhou 510642, China
15
d
16
University, Wuxi, Jiangsu 214122, China
17
e
18
Agricultural University, Beijing 100094, China
19
f
20
119991 Moscow, Russia
Tropical Medicine Institute &South China Chinese Medicine Collaborative Innovation Center,
Department of Applied Chemistry, College of Materials and Energy, South China Agricultural
State Key Laboratory of Food Science and Technology, School of Food Science of Jiangnan
Department of Veterinary Pharmacology and Toxicology, College of Veterinary Medicine, China
Faculty of Chemistry, M.V. Lomonosov Moscow State University, Leninskie gory 1, Building 3,
21 22
* Corresponding author. Phone: +8620-8528 3448. Fax: +8620-8528 0270. E-mail:
[email protected] (Hongtao Lei).
23 24
#
Equal contribution
25 1
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
26
Notes
27
The authors declare no conflict of interest.
2
ACS Paragon Plus Environment
Page 2 of 28
Page 3 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
28
Abstract: Antibody-based immunoassay methods have been important tools for
29
monitoring drug residues in animal foods. However, due to limited knowledge of the
30
quantitative structure-activity relationship between a hapten and its resultant antibody
31
specificity, it is still a huge challenge for antibody production with a desired
32
specificity. In this study, the three-dimensional quantitative structure-activity
33
relationship (3D QSAR) was analyzed in accordance with the cross-reactivity of
34
quinolone drugs reacting with the antibody raised by pipemidic acid as the
35
immunizing hapten, as well as comparing with the reported cross-reactivity data and
36
their hapten structures. It was found that the specificity of quinolone antibody was
37
strongly related to the conformation of the used hapten, and the hapten conformations
38
shaped like “I”, “P” and “ф” were essential for the desired a high specificity with low
39
cross-reactivity, but the hapten conformation shaped like “Y” led to a broad
40
specificity antibody with high cross-reactivity. Almost all the antibodies against
41
quinolones could result from these four hapten conformations. It was firstly found that
42
the concrete conformations dominated the specificity of the antibody to quinolone,
43
which will be of significance for the accurate hapten design, predictable antibody
44
specificity and better understanding the recognition mechanism between the hapten
45
and the antibodies for immunoassay.
46
3
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
47 48
INTRODUCTION Quinolones are a class of antimicrobial drugs widely used in the prevention and
49
treatment of animal diseases. However, their residues in animal foods have raised a
50
series of health issues, including skin reactions, phototoxicity, and hyperglycemia1-3.
51
In order to effectively monitor the quinolones abuse in animal-derived food products,
52
it is important to develop a rapid screening method for monitoring quinolone residues.
53
Compared with the traditional instrumental methods4-8, immunoassays relying on
54
antigen−antibody interaction are favored by analytical chemists due to their
55
convenient manipulation, simple sample treatment, low-cost and easy automation.
56
Some immunoassays have been developed for the detection of quinolone residues9-11.
57
It is well-known that an antibody with the desired broad or high specificity (high
58
or low cross-reactivity) is crucial to develop an immunoassay12. High specificity
59
means low cross-reactivity to structure-related compounds13,14, which is traditionally
60
favored by a single analyte analysis in one test. On the contrary, broad specificity
61
means that the high cross- reactivity to structure-related compounds is useful for the
62
monitoring a series of compounds to finish multianalyte analysis in one test15. Now
63
the broad-specificity, multianalyte recognition in one assay, seems to be a focus of
64
antibody production and immunoassay development for quinolone drugs16-18. There
65
have been a few of reports about the broad specificity of quinolone antibodies based
66
on molecule modeling. Wang et al developed a generic immunoassay using
67
ciprofloxacin antibodies for 12 fluoroquinolone antibiotics, and the obtained
68
cross-reactivity data showed the ethyl group of the piperazinyl ring exerted a limited
69
effect on antibody binding but appeared to be important during antibody production18.
70
In our previous study, pazufloxacin was employed as hapten to produce a broad
71
specific antibody recognizing 23 quinolones19, it was found that the quinolones could
72
interact with the antibody with different binding positions, and cross-reactivity was
73
mainly positively correlated with the bulky substructure containing an electronegative
74
atom at position 7, while it was negatively associated with the large bulky
75
substructure at position 1 of quinolones19. However, the topological properties of
76
haptens provided a rich structural information which could be helpful for 4
ACS Paragon Plus Environment
Page 4 of 28
Page 5 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
77
understanding the specificity of antibody19, the reasonably predicting and designing a
78
resultant antibody specificity are still a great challenge due to the unclear
79
structure-activity relationship and the limited knowledge of the recognition
80
mechanism19.
81
In this study, pipemidic acid, a quinolone drug with a flat conformation shaped
82
like “I” at position 7, was used as a hapten to produce a polyclonal antibody, a highly
83
sensitive competitive indirect ELISA (ciELISA) was successfully constructed in a
84
heterologous coating format. Using the comparative molecular field analysis (CoMFA)
85
based on the obtained cross-reactivity of the antibody raised by pipemidic acid, the
86
three-dimensional quantitative structure-activity relationship (3D QSAR) was
87
constructed among quinolone hapten structures and the specificity of pipemidic acid
88
antibody. Moreover, comparing with the reported cross-reactivity data and typical
89
quinolone hapten structures including clinafloxacin, ofloxacin, pazufloxacin and
90
ciprofloxacin, the optimal hapten conformations for the corresponding antibody
91
specificity were investigated for the first time.
92 93
EXPERIMENTAL SECTION
94
Reagents
95
Pipemidic acid, 3,3’,5,5’-tetramethylbenzidine (TMB), bovine serum albumin
96
(BSA), ovalbumin (OVA), complete and incomplete Freund’s adjuvants,
97
1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC), Tween-20,
98
N,N-dimethylformamide (DMF) were purchased from Sigma (St. Louis, MO, USA).
99
HRP-conjugated goat-anti-rabbit IgG was obtained from Boster Biotech Corporation
100
Limited. (Wuhan, China). Rufloxacin, prulifloxacin, norfloxacin, pefloxacin,
101
enrofloxacin, oxolinic acid, racemic ofloxacin, ciprofloxacin, lomefloxacin,
102
danofloxacin, garenoxacin, pazufloxacin, clinafloxacin, gatifloxacin, marbofloxacin,
103
difloxacin, sarafloxacin, sparfloxacin and tosufloxacin were purchased from
104
Veterinary Medicine Supervisory Institute of China (Beijing, China). S-(-)-ofloxacin
105
and R-(+)-ofloxacin were purchased from Daicel Chiral Technologies Company
106
(Figure 1). All of the chemicals and organic solvents, which were analytical grade or 5
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
107
better, were obtained from a local chemical supplier (Yunhui Trade Co., Ltd.,
108
Guangzhou, China). Coating buffer, washing solution, blocking solution, substrate
109
buffer, stopping reagent and TMB solution used in this study were prepared as
110
previous work in our laboratory20. Standard stock solution (1 mg/mL) was prepared
111
by dissolving an appropriate amount of each standard in 0.03 mol/L sodium hydroxide
112
solution and kept at 4 °C until use. Working standard solutions (0.038, 0.31, 2.44,
113
19.53, 156.25, 1250, 10000 ng/mL) were prepared by diluting the stock solution in
114
Phosphate-buffered saline with 0.1% Tween-20 (PBST).
115
Instruments
116
UV-visible absorption measurement was performed on a UV-3010
117
spectrophotometer (Hitachi, Japan). ELISA plates were washed by a microtiter plate
118
washer DEM-3 (Tuopu, China). Absorbance was measured at a wavelength of 450 nm
119
using a Multiskan MK3 microplate reader (Thermo Labsystems, USA).
120
Preparation of hapten-protein conjugates
121
Pipemidic acid was coupled to BSA via EDC for the immunogen, and both
122
pipemidic acid and quinolone drugs (norfloxacin-OVA, pazufloxacin-OVA,
123
ciprofloxacin-OVA, gatifloxacin-OVA, lomefloxacin-OVA, sarafloxacin-OVA and
124
garenoxacin-OVA) were coupled with OVA via EDC for the use of the coating
125
antigens according to previous work with modification21.
126
Antibody production
127
Animal treatments were conducted in accordance with the guidelines of the
128
Chinese Association for Laboratory Animal Sciences. Two New Zealand rabbits
129
(1.5-2.0 kg), supplied by the Guangdong Medical Laboratory Animal Center, were
130
immunized using pipemidic acid-BSA as the immunogen to generate the polyclonal
131
antibody against pipemidic acid according to our previous work with modification20.
132
The obtained antisera from rabbits were purified by caprylic acid-saturated
133
ammonium sulfate precipitation, and the purity was confirmed by sodium dodecyl
134
sulphate-polyacrylamide gel electrophoresis (SDS-PAGE), and then divided into
135
aliquots, labeled, and stored at -20 °C until use22.
136
ELISA procedure 6
ACS Paragon Plus Environment
Page 6 of 28
Page 7 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
137
The ELISA was established on the basis of the common procedure of competitive
138
indirect enzyme linked immunosorbent assay (ciELISA)20. Calibration curves were
139
obtained by plotting the normalized signal B/B0 against the logarithm of analyte
140
concentration. The logarithm of pipemidic acid concentration served as X-axis,
141
whereas B/B0 (B, the average absorbance of the wells in the presence of a competitor;
142
B0, the average absorbance of the well without analyte) served as Y-axis. The 50%
143
inhibition value (IC50) were obtained using a four-parameter logistic equation that was
144
used to fit the sigmoidal curve by OriginPro 8.5 software (OriginLab Corporation,
145
Northampton, MA)23 . The equation is Y = (A–D)/[1+(X/C)E]+D
146 147
where A is the maximum response at high asymptotes of the curve, D is the
148
minimum response at low asymptotes of the curve, C is the concentration of the
149
analyte that results in 50% inhibition and E is the slope of sigmoidal curve. The limit
150
of detection (LOD) was defined as the concentration of analyte that inhibited 10%
151
(IC10)24. The dynamic working range was defined as the lower and upper
152
concentration that inhibited 20% ~ 80%25.
153
Specificity
154
Specificity of the antibody was evaluated by measuring the cross-reactivity (CR)
155
using a group of structurally related quinolone drugs. 22 compounds were selected for
156
this test (Figure 1), the obtained IC50 values were used to calculate cross-reactivities
157
as follows:
158
CR (%) = [IC50 (pipemidic acid) / IC50 (structurally related quinolone drugs)] × 100%
159
QSAR
160
CoMFA for pipemidic acid immunoassay
161
The molecular modeling was conducted using SYBYL-X 2.1 program package.
162
These 22 dataset molecules were constructed using the “SKETCH” option function;
163
then they were energy minimized using the Powell method with MMFF94 force field
164
and MMFF94 charges. The criteria of the termination and max iterations were set to
165
be 0.005 kcal/(mol×Å) and 1000, respectively. The other parameters were the defaults.
166
The molecular alignment was carried out using pipemidic acid as the template 7
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
167
molecule and its C-4a, C-5, N-8 and C-8a as the common core structure. Pipemidic
168
acid, prulifloxacin, rufloxacin, norfloxacin, pefloxacin, enrofloxacin, lomefloxacin,
169
danofloxacin, garenoxacin, S-(-)-ofloxacin, clinafloxacin, gatifloxacin, marbofloxacin,
170
difloxacin, sarafloxacin, sparfloxacin and tosufloxacin were classified into the
171
training set, and the others of oxolinic acid, R-(+)-ofloxacin, ciprofloxacin and
172
pazufloxacin were treated as the test set. The converted pIC50 (-log IC50) values were
173
used in analysis.
174
CoMFA steric and electrostatic interaction fields of each molecule were
175
calculated on a 3D cubic lattice. A sp3 carbon probe atom with Van der Waal radius of
176
1.52 Å and +1 charge was used to generate the steric and electrostatic filed energies.
177
The cross-validated correlation coefficient R2 (q2) and the optimum number of
178
components (ONC) were obtained using the partial least square (PLS) method with
179
leave one out (LOO) option. Using the obtained ONC, the final non-cross-validated
180
model was created. Except for using the MMFF94 charges, the other parameters or
181
options of the CoMFA were the defaults.
182
Conformation comparing analysis
183
Previously, we raised a clinafloxacin polyclonal antibody and developed a rapid,
184
specific immunoassay for clinafloxacin21. In this work, the converted pIC50 (-log IC50)
185
values of cross-reactivity data of clinafloxacin were directly used for molecular
186
modeling. The molecular alignment was carried out using clinafloxacin as the
187
template molecule and its C-4a, C-5, N-8 and C-8a as the common core structure.
188
clinafloxacin, gatifloxacin, ciprofloxacin, S-(-)-ofloxacin, rufloxacin, enrofloxacin,
189
marbofloxacin, lomefloxacin, prulifloxacin, pefloxacin, nalidixic acid tosufloxacin
190
and difloxacin were classified into the training set, and the others of danofloxacin,
191
R-(+)-ofloxacin, sparfloxacin and sarafloxacin were treated as the test set. The
192
molecular modeling was conducted using the same method and parameter as above.
193
The CoMFA of other quinolones, including pazufloxacin, ciprofloxacin and ofloxacin,
194
were conducted by literature and used to discuss in this study18,26,27.
195 196
RESULTS AND DISCUSSION 8
ACS Paragon Plus Environment
Page 8 of 28
Page 9 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
197
Immunoreagent preparation
198
The pipemidic acid bearing a carboxylic acid group at the end of the spacer was
199
covalently coupled with a carrier protein (BSA or OVA) by the direct EDC method.
200
UV spectra were measured to assure the successful conjugation. Figure S1 shows the
201
UV spectra of BSA, OVA, pipemidic acid, pipemidic acid-BSA and pipemidic
202
acid-OVA. BSA/OVA showed a characteristic absorption peak at 280 nm, while
203
pipemidic acid had the peak at 332 nm. The absorption spectra of pipemidic acid
204
-BSA/OVA conjugates contained both absorption peaks of pipemidic acid and
205
BSA/OVA, but with somewhat blue shift. This indicated that the coupling of
206
pipemidic acid to BSA and OVA was successful28. Similar results were obtained with
207
other quinolone drugs-OVA conjugate (data not shown). The SDS-PAGE result
208
showed that the purified pipemidic acid antibody had a heavy chain observed at 50
209
kDa and a light chain at about 25 kDa. There was no superfluous band (Figure S2).
210
Thus, the purified antibody was ideal for the further investigation.
211
Optimization of ciELISA
212
To obtain the optimal sensitivity of ciELISA, the concentration of coating
213
antigen and antibody dilution time were optimized to obtain a maximum absorbance
214
(Amax) for the zero standard concentration (blank) in the range of 1.0-1.5 and the best
215
sensitivity (minimum IC50 value)29.
216
For homologous assay format (pipemidic acid-OVA for the use of the coating
217
antigen) , a poor binding affinity with a low inhibition rate of 48.05% was obtained.
218
In addition, the standard curve for pipemidic acid (Figure 2) was constructed in the
219
concentration range from 6.53 to 144.87 ng/mL and the values of LOD at 10%
220
inhibition was within 2.6 ng/mL. The results indicated that the sensitivity had 14.4
221
times lower than that of the UPLC–MS/MS method7 and the inhibition rate (48.05%)
222
was undesirable, which failed to meet the purpose of this study.
223
In order to obtain the better sensitivity, a series of coating antigens
224
(norfloxacin-OVA, pazufloxacin-OVA, ciprofloxacin-OVA, gatifloxacin-OVA,
225
lomefloxacin-OVA, sarafloxacin-OVA and garenoxacin-OVA) were compared at the
226
same coating concentration (1µg/mL) (Table S1). Surprisingly, although homologous 9
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
227
assay format demonstrated a better titer (titer=32000) than any one of heterogeneous
228
formats (norfloxacin-OVA, pazufloxacin-OVA, ciprofloxacin-OVA,
229
gatifloxacin-OVA, lomefloxacin-OVA, sarafloxacin-OVA, garenoxacin-OVA for the
230
use of the coating antigens, respectively), it was found that lomefloxacin-OVA
231
showed the highest inhibition rate (86.7%) with a titer of 8000.
232
The calibration curve for pipemidic acid in homologous assay and heterogeneous
233
assay format were constructed(Figure 2). Compared with the IC50 (30.76 ng/mL) and
234
LOD (2.64 ng/mL) in homologous assay format (Table S1 and Figure 2), the IC50 and
235
LOD in heterogeneous assay format (lomefloxacin-OVA as the coating antigen) were
236
5.99 ng/mL and 0.31 ng/mL, respectively, indicating that the sensitivity was better
237
than that of the homologous combination and that of the reported physio-chemical
238
method7. As a result, the combination of pipemidic acid antibody and
239
lomefloxacin-OVA was used for the further investigation due to its better sensitivity.
240
Specificity
241
The cross-reactivities of 22 kinds of quinolones were determined using the
242
developed ELISA with pipemidic acid as the reference compound. Except for
243
rufloxacin and prulifloxacin, the cross-reactivity values of other quinolones are lower
244
than 15% (Table 1). Only 9% of the quinolones in this study displayed that their
245
cross-reactivities were over 15%, thus, it could be regarded as high specificity of the
246
pipemidic acid antibody.
247
Generally, the high cross-reactivity of haptens could be directly ascribed to the
248
similarity of the molecular structure, and the low cross-reactivity are possibly related
249
to their structure difference of the cross-reactants30. In this study, norfloxacin had ever
250
been proved to be a good hapten candidate resulting to a broad-specificity antibody
251
that could recognize 13 quinolones31. The structure difference between norfloxacin
252
and pipemidic acid was at position 6 and 8, the atoms of norfloxacin were carbon at
253
position 6 and C-F group at position 8, however, the atoms of pipemidic acid were
254
nitrogen. Such difference seems to be a little, but their cross-reactivities were
255
significantly different (14.1% for norfloxacin, 100% for pipemidic acid). This
256
suggested that the position 6 and 8 were likely crucial to the desired hapten 10
ACS Paragon Plus Environment
Page 10 of 28
Page 11 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
257
conformation for antibody recognizing. Besides, the structures of rufloxacin and
258
ofloxacin are similar except for the ring formed by the group at position 1 and 8, this
259
implied that the ring also played an important role in the hapten-antibody binding.
260
Additionally, comparing with the structure of pipemidic acid, difloxacin had one
261
supplemented benzene ring at position 1, however, the cross-reactivity of difloxacin
262
dramatically dropped from CR 100% for pipemidic acid to CR 0.5%. Moreover, the
263
cross-reactivities of sarafloxacin (CR=0.3 %) and tosufloxacin (CR=0.3%) were also
264
very low due to added benzene ring at position 1. These dramatic changes in
265
cross-reactivity induced the importance of the groups at position 1, 6 and 8 for a
266
desired binding conformation. To better understand the high specificity of the
267
obtained pipemidic acid antibody, CoMFA was used for the further investigation.
268
CoMFA analysis
269
The CoMFA models exhibited the rational q2 values greater than 0.5 and the S
270
and E fields offered 58.2% and 41.8% contribution to the affinity (Table S2). The
271
pIC50 values of the molecules in the test set had been perfectly predicted in the
272
CoMFA model (Figure S3).
273
The contour maps reflected the desired/undesired steric/electrostatic features for
274
the molecular binding affinity in the CoMFA model, in which the green and yellow
275
contours represent the favorable and unfavorable steric regions, while the blue and red
276
contours represent the favorable and unfavorable electropositive regions, respectively.
277
The piperazine ring at position 7 was nearly in the same plane with the basic structure,
278
1,4-dihydro-4-oxo-3-quinolinecarboxylic acid shared by almost all quinolones (Figure
279
3a) and the conformation of pipemidic acid shaped like a letter “I”. Thus, from the
280
view of looking down, the piperazine ring formed a flat antibody binding cavity that
281
could not accommodate a large group.
282
And the green contour is near the position 4’ of pipemidic acid (Figure 3a), this
283
implied that the antibody could not recognize the group at both sides of position 7.
284
However, the piperazine ring at position 7 of norfloxacin was almost perpendicular to
285
the basic structure (Figure 3b). As a result, in order to accommodate a large group, it
286
seemed to be essential for hapten owning a large antibody binding cavity at this 11
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
287
position. The piperazine ring at position 7 in other quinolones was also basically
288
perpendicular to the basic structure and was consistent with norfloxacin (Figure 3 c-f).
289
These could contribute to the main reason that the resultant antibody against
290
pipemidic acid exhibited low cross-reactivity to quinolones.
291
The hydrogen atom at the oxazine ring of S-(-)-ofloxacin interacted with the little
292
yellow contour and the methyl group were near the big yellow contour, however, the
293
hydrogen atom at the oxazine ring of R-(+)-ofloxacin interacted with the green
294
contours and the methyl group deviated from the little yellow contour due to their
295
opposite conformations (Figure 3c, d). This could be the reason that S-(-)-ofloxacin
296
(experimental pIC50=9.585) showed a lower binding activity to the pipemidic acid
297
antibody than that of R-(+)-ofloxacin (experimental pIC50= 10.000) (Table S3).
298
Compared the conformation of S-(-)-ofloxacin with that of norfloxacin, the group at
299
position 8 in S-(-)-ofloxacin was bigger and closer to yellow contours than that of
300
norfloxacin, this could be ascribed to the lower activity of S-(-)-ofloxacin
301
(experimental pIC50=9.585) (Figure 3b, d). In addition, comparison of the CoMFA
302
maps of pefloxacin and difloxacin (Figure 3e, f), the yellow contours near the benzene
303
ring of difloxacin indicated the bulky group at position 1 decreased the binding
304
activity, therefore, the activities of difloxacin (experimental pIC50=8.827) were lower
305
than that of pefloxacin (experimental pIC50=10.252) (Table S3).
306
Besides the major contribution of steric field, the electrostatic field also played
307
an important role in the quinolone-antibody binding conformation (Figure 3g, h). The
308
difference between the norfloxacin and sarafloxacin was the group at position 1, and
309
the group was interacted with blue contour of a rhombus. However, the
310
electronegative fluorine atom of sarafloxacin was near these regions, this additionally
311
led to lower binding activity of sarafloxacin. It indicated that electronegative groups
312
at position 1 decreased the binding activity, which was consistent with the conclusion
313
of steric effect above.
314
Conformation comparing analysis
315
Table 2 showed 22 kinds of models of the minimum energy conformations of the
316
quinolones from the immunoassay for pipemidic acid in this study and the previously 12
ACS Paragon Plus Environment
Page 12 of 28
Page 13 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
317
reported immunoassay for clinafloxacin21, they were divided into four groups in
318
accordance with their conformation features at minimum energy. The first group
319
contained pipemidic acid, nalidixic acid and oxolinic acid, their conformations shaped
320
like a letter “I”. The second group contained clinafloxacin, danofloxacin and
321
tosufloxacin, and their conformations shaped like a letter “P”. The third group
322
contained difloxacin, enrofloxacin, gatifloxacin, lomefloxacin, pefloxacin, rufloxacin,
323
R-(+)-ofloxacin, S-(-)-ofloxacin, garenoxacin, prulifloxacin, sparfloxacin and
324
marbofloxacin, and their conformations shaped like “ф”,. The fourth group contained
325
ciprofloxacin, norfloxacin, pazufloxacin and sarafloxacin, and their conformations
326
formed “Y” shape (or a lollipop).
327
In the first group, the conformation features of nalidixic acid and oxolinic acid
328
were also shaped like “I” and consistent with pipemidic acid. Thus, the antibody
329
derived from nalidixic acid or oxolinic acid as a hapten could be of high specificity.
330
In the second group, CoMFA was used for the further investigation of
331
clinafloxacin immunoassay. The CoMFA models exhibited the rational q2 values was
332
0.587 and the S and E fields offered 53.4% and 46.6% contribution to the affinity
333
(Table S2), respectively. The pIC50 values of the molecules in the test set had been
334
perfectly predicted (Figure S3). Therefore, the contour analysis of the model was
335
further carried out.
336
The group at position 7 of clinafloxacin was on the side of the basic structure
337
plane and the conformation of clinafloxacin shaped like a letter “P” (Figure 4a). And
338
the green contour near the amino group at position 3’ in clinafloxacin (Figure 4a), this
339
implied that the antibody to clinafloxacin could not recognize the group on the side
340
near the position 5’. However, the piperazine ring at position 7 in ciprofloxacin was
341
basically perpendicular to the basic structure (Figure 4b). And other quinolones with
342
piperazine ring at position 7 were also basically perpendicular to the basic structure
343
and were consistent with that of ciprofloxacin (Figure 4c-f). Moreover, the amino
344
group and 5-membered ring at position 7 seems to form a small antibody binding
345
cavity that would not accommodate a large group. For example, a piperazine ring is a
346
big group that could not allow to be accommodated in the small antibody binding 13
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
347
cavity formed by the amino group and 5-membered ring of clinafloxacin. However,
348
the ciprofloxacin shaped like “Y” and the piperazine ring in ciprofloxacin could form
349
a bigger antibody binding cavity, and thus the bigger antibody binding cavity should
350
contribute to the broad specificity of the corresponding antibody to cipfloxacin, and
351
then the high specificity of clinafloxacin antibody would also be understandable. The
352
previous study of clinafloxacin also showed that all the CRs for structure-related
353
quinolones were lower than 15% (Table S5) 21.
354
In addition, when comparing the contour maps of gatifloxacin, lomefloxacin and
355
S-(-)-ofloxacin (Figure 4c, d, f), it could be found that the group at position 8 of
356
gatifloxacin was bigger and closer to the green contour over the structure than those
357
of S-(-)-ofloxacin. But the group at position 8 in S-(-)-ofloxacin was bigger and closer
358
than those of lomefloxacin, this could be ascribed to the highest activity of
359
gatifloxacin (experimental pIC50=6.076), followed by S-(-)-ofloxacin (experimental
360
pIC50=5.440), and lomefloxacin (experimental pIC50=4.828) (Table S4).
361
The green contour at the map bottom interacted with the methyl at the oxazine
362
ring of S-(-)-ofloxacin, however, the methyl at the oxazine ring of R-(+)-ofloxacin
363
were brought near the yellow contour in the upper portion of map due to their
364
opposite conformations (Figure 4e, f). It revealed the mechanism that S-(-)-ofloxacin
365
had higher binding affinity than R-(+)-ofloxacin. When the antibody distinguishing
366
the chiral isomer of quinolones, it showed that the bulky group near the green contour
367
at position 8 played a critical role. Comparison of the CoMFA maps of sarafloxacin
368
and ciprofloxacin , the yellow contours near the benzene ring of sarafloxacin
369
indicated the bulky group at position 1 decreased the binding activity (Figure 4b, g),
370
therefore, the activities of sarafloxacin (experimental pIC50=4.628) were lower than
371
that of ciprofloxacin (experimental pIC50=5.640) (Table S4). Since the yellow
372
contours near the benzene ring of sarafloxacin, it is understandable that the activity of
373
sarafloxacin (experimental pIC50=4.628) was lower, and the predicted pIC50 value of
374
sarafloxacin in the test set was lower than the experimental value (Table S4).
375
The electrostatic contour maps also reflected the molecular binding affinity in the
376
CoMFA model (Figure 4). The amino group at position 7 in clinafloxacin near the 14
ACS Paragon Plus Environment
Page 14 of 28
Page 15 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
377
blue contour was a strong electron donor group, while the groups of gatifloxacin and
378
lomefloxacin were weak electron donor groups. As a result, the binding activity of
379
gatifloxacin or lomefloxacin was much lower than that of clinafloxacin, this was
380
consistent with the steric effect above. The conformations of danofloxacin and
381
tosufloxacin in the second group also like “P” and similar with clinafloxacin, as a
382
result, their antibodies also would show high-specificity as clinafloxacin. This had
383
been proved by a previous study using anti-danofloxacin antibody (Table S5)32. The
384
conformation of tosufloxacin demonstrated high similarity with that of clinafloxacin
385
and could be a suitable hapten for the production of highly specific antibody.
386
The third group consisted of 12 kinds of quinolones in this study, they all shaped
387
like “ф”, and it could be predicted that their antibodies would be predicted to
388
accordingly be high-specific, this have also been confirmed by experiments (Table 2
389
and Table S5)10,11,27,33-37. For example, ofloxacin contains a substituent on the
390
piperazine ring at position 7, and the previous QSAR study showed that the green
391
contour was near the substituent, while two yellow contours distributed in both sides
392
of piperazine ring27. This implied that the antibody could not recognize quinolones
393
without a substituent on the piperazine ring or with a substituent on other site of
394
piperazine ring. And the experimental cross-reactivity had already proved that only
395
rufloxacin, garenoxacin and marbofloxacin had high cross reactivity values
396
(cross-reactivity>15%)27. Therefore, it could be concluded that hapten quinolone
397
shaped like “I” or “P” or “ф” would result in an antibody with low cross-reactivity
398
and high specificity.
399
In the fourth group (Table 2), different from the structures shaped like “I”, “P”
400
and “ф”, all the proposed compounds shaped like “Y” or a lollipop, their
401
conformations could be predicted to produce a large antibody binding cavity to
402
accommodate the piperazinyl group at position 7 (Table 2). For example,
403
pazufloxacin contained a 1-aminocyclopropyl group at position 7 but not a
404
piperazinyl group shared by many quinolones, both the amino and cyclopropyl groups
405
around position 7 of pazufloxacin formed “Y” shape or a lollipop, and the green
406
contour also lay on both sides of the position 726, it implied that the resultant antibody 15
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
407
to pazufloxacin would broadly recognize other quinolones. In fact, the experimentally
408
raised pazufloxacin antibody with high sensitivity and broad specificity could
409
recognize 24 quinolones as expected (Table S5)26, this is a broad specificty, but not a
410
high specificity, because pazufloxacin shaped unlike any one of three conformations
411
“I” or “P” or “ф”.
412
Ciprofloxacin is another good example to prove the three essential conformations
413
for a high specificity18. The piperazine ring at position 7 in ciprofloxacin was almost
414
perpendicular to the basic structure (Figure 4b and Table 2), the conformation shaped
415
liked a lollipop, and thus the ciprofloxacin antibody should be able to accommodate a
416
large group and demonstrated a broad specificity according to the QSAR analysis
417
above in this study. Actually this has also been verified again by a previously reported
418
monoclonal antibody and a developed broad-specificity immunoassay for 12
419
quinolones (Table S5)18. The conformations of norfloxacin and sarafloxacin in the
420
fourth group also like “Y” and were similar with ciprofloxacin, as a result, their
421
antibodies also would show broad specificity as ciprofloxacin. The structure-related
422
quinolones of norfloxacin and sarafloxacin whose cross-reactivity values were over
423
15%, were 13 kinds and 10 kinds, respectively (Table S5)9,31.
424
Therefore, it could be concluded that the shape like “I”, “P” and “ф” was the
425
essential conformation feature of quinolone hapten used to produce antibody with
426
high specificity, while the conformation of quinolone hapten like “Y” shape (or a
427
lollipop) could be used to produce antibody with broad specificity.
428 429
CONCLUSIONS
430
In summary, 3D QSAR studies were performed to investigate the molecular
431
recognition between the antibody and quinolone drugs, the CoMFA model revealed
432
that the quinolones shaped like “I”, “P” and “ф” formed a flat conformation, which
433
could not accommodate a large group, and thus the resultant antibody would be high
434
specificity. But the hapten conformation shaped like “Y” will lead to a broad
435
specificity antibody with the high cross-reactivity. Almost all the antibodies against
436
quinolone could result from these four hapten conformations. This finding is the first 16
ACS Paragon Plus Environment
Page 16 of 28
Page 17 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
437
time to systemically and effectively elucidate and predict the high specificity of
438
quinolone antibodies, it will be of significance of the accurate hapten design,
439
predictable antibody specificity and better understanding of the recognition
440
mechanism of hapten and the antibody specificity.
441 442 443
ASSOCIATED CONTENT Supporting Information. Description of the optimized ciELISA conditions, the
444
summary of the calculated parameters of the CoMFA model, the predicted values
445
derived from the CoMFA models of pipemidic acid, the predicted values derived from
446
the CoMFA models of clinafloxacin, a review of immunoassay for the determination
447
of quinolones in recent years, UV spectra of BSA, OVA, pipemidic acid, pipemidic
448
acid-BSA and pipemidic acid-OVA, SDS-PAGE pattern using purified pipemidic acid
449
polyclonal antibody, the scatter plots of predicted versus experimental pIC50.
450 451 452
ACKNOWLEDGMENTS This work was supported by Natural Science Foundation of China (U1301214,
453
30700663, 21475047), Guangdong and Guangzhou Planned Program in Science and
454
Technology (S2013030013338, 2016201604030004, 2014TX01N250,
455
2013B051000072, and 2014A030306026). Guangdong Natural Science Foundation
456
(2015A030313366), the support of 2016KYDT04 and 2016KYDT06 by Guangzhou
457
University of Chinese Medicine.
458 459
REFERENCES
460
(1) Van Bambeke, F.; Michot, J. M.; Van Eldere, J.; Tulkens, P. M. Clin. Microbiol.
461
Infec. 2005, 11, 256-280.
462
(2) Andriole, V. T. Clin. Infect. Dis. 2005, 41, S113-S119.
463
(3) Mehlhorn, A. J.; Brown, D. A. Ann. Pharmaco. 2007, 41, 1859-1866.
464
(4) Hernández-Arteseros, J.; Barbosa, J.; Compano, R.; Prat, M. J. Chromatog. A
465
2002, 945, 1-24.
17
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
466
(5) Espinosa-Mansilla, A.; Jiménez Girón, A.; Muñoz de la Peña, A. Czech J. Food
467
Sci. 2012, 30, 74-82.
468
(6) Pecorelli, I.; Galarini, R.; Bibi, R.; Floridi, A.; Casciarri, E.; Floridi, A. Anal. Chim.
469
Acta 2003, 483, 81-89.
470
(7) Chang, C. S.; Wang, W. H.; Tsai, C. E. J. Food Drug Anal. 2010, 18, 87-97.
471
(8) Dorival‐García, N.; Zafra‐Gómez, A.; Cantarero, S.; Navalón, A.; Vílchez, J.
472
Microchem. J. 2013, 106, 323-333.
473
(9) Huet, A. C.; Charlier, C.; Tittlemier, S. A.; Singh, G.; Benrejeb, S.; Delahaut, P. J
474
Agr. Food Chem. 2006, 54, 2822-2827.
475
(10) Lu, S. X.; Zhang, Y. L,; Liu, J. T.; Zhao, C. B.; Liu, W.; Xi, R. M. J Agr. Food
476
Chem. 2006, 54, 6995-7000.
477
(11) Sheng, W.; Xia, X. F.; Wei, K. Y.; Li, J.; Li, Q. X.; Xu, T. J Agr. Food Chem.
478
2009, 57, 5971-5975.
479
(12) Wang, Z. H.; Kai, Z. P.; Beier, R. C.; Shen, J. Z.; Yang, X. L. Int. J. Mol. Sci.
480
2012, 13, 6334-6351.
481
(13) Cui, J. L.; Zhang, K.; Huang, Q. X.; Yu, Y. Y.; Peng, X. Z. Anal. Chim. Acta 2011,
482
688, 84-89.
483
(14) Zhang, H. Y.; Wang, S.; Fang, G. Z. J. Immunol. Methods 2011, 368, 1-23.
484
(15) Li, Y. F.; Sun, Y. M.; Beier, R. C.; Lei, H. T.; Gee, S.; Hammock, B. D.; Wang, H.;
485
Wang, Z.; Sun, X.; Shen, Y. D.; Yang, J. Y.; Xu, Z. L. TrAC. Trends Anal. Chem. 2017,
486
88, 25-40.
487
(16) Leivo, J.; Lamminmäki, U.; Lövgren, T.; Vehniäinen, M. J Agr. Food Chem.
488
2013, 61, 11981-11985.
489
(17) Cao, L. M.; Kong, D. X.; Sui, J. X.; Jiang, T.; Li, Z. Y.; Ma, L.; Lin, H. Anal.
490
Chem. 2009, 81, 3246-3251.
491
(18) Wang, Z. H.; Zhu, Y.; Ding, S. Y.; He, F. Y.; Beier, R. C.; Li, J. C.; Jiang, H. Y.;
492
Feng, C. W.; Wan, Y. P.; Zhang, S. X. Anal. Chem. 2007, 79, 4471-4483.
493
(19) Xu, Z. L.; Shen, Y. D.; Zheng, W. X.; Beier, R. C.; Xie, G. M.; Dong, J. X.; Yang,
494
J. Y.; Wang, H.; Lei, H. T.; She, Z. G. Anal. Chem. 2010, 82, 9314-9321.
495
(20) Luo, L.; Xu, Z. L.; Yang, J. Y.; Xiao, Z. L.; Li, Y. J.; Beier, R. C.; Sun, Y. M.; Lei, 18
ACS Paragon Plus Environment
Page 18 of 28
Page 19 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
496
H. T.; Wang, H.; Shen, Y. D. J Agr. Food Chem. 2014, 62, 12299-12308.
497
(21) Chen, J. H.; Lv, S. W.; Wang, Q.; Xu, Z. L.; Yang, J. Y.; Shen, Y. D.; Wang, H.;
498
Sun, Y. M.; Lei, H. T. Food Anal. Methods 2015, 8, 1468-1476.
499
(22) Page, M.; Thorpe, R. In The Protein Protocols Handbook; Humana Press: 2002,
500
p 983-984.
501
(23) Oubiña, A.; Barceló, D.; Marco, M. P. Anal. Chim. Acta 1999, 387, 267-279.
502
(24)Yuan, Y. L.; Hua, X. D.; Li, M.; Yin, W.; Shi, H. Y.; Wang, M. H. RSC Adv. 2014,
503
4, 24406-24411.
504
(25)Yu, F. Y.; Vdovenko, M. M.; Wang, J. J.; Sakharov, I. Y. J Agr. Food Chem. 2011,
505
59, 809-813.
506
(26) Chen, J. H.; Lu, N.; Shen, X.; Tang, Q. S.; Zhang, C. J.; Xu, J.; Sun, Y. M.;
507
Huang, X. A..; Xu, Z. L.; Lei, H. T. J Agr. Food Chem. 2016, 64, 2772-2779.
508
(27) Mu, H. T.; Lei, H. T.; Wang, B. L.; Xu, Z. L.; Zhang, C. J.; Ling, L.; Tian, Y. X.;
509
Hu, J. S.; Sun, Y. M. J Agr. Food Chem. 2014, 62, 7804-7812.
510
(28) Zhang, H. T.; Jiang, J. Q.; Wang, Z. L.; Chang, X. Y.; Liu, X. Y.; Wang, S. H.;
511
Zhao, K.; Chen, J. S. J. Zhejiang Univ. Sci. B 2011, 12, 884-891.
512
(29) Han, D.; Yu, M.; Knopp, D.; Niessner, R.; Wu, M.; Deng, A. P. J Agr. Food Chem.
513
2007, 55, 6424-6430.
514
(30) Lei, H. T.; Su, R.; Haughey, S. A.; Wang, Q.; Xu, Z. L.; Yang, J. Y.; Shen, Y. D.;
515
Wang, H.; Jiang, Y. M.; Sun, Y. M. Molecules 2011, 16, 5591-5603.
516
(31) Jiang, W. X.; Wang, Z. H.; Beier, R. C.; Jiang, H. Y.; Wu, Y. N.; Shen, J. Z. Anal.
517
Chem. 2013, 85, 1995-1999.
518
(32) Liu, Z. Q.; Lu, S. X.; Zhao, C. H.; Ding, K.; Cao, Z. Z.; Zhan, J. H.; Ma, C.; Liu,
519
J. T.; Xi, R. M. J. Sci. Food Agric. 2009, 89, 1115-1121.
520
(33) Li, C.; Jiang, J.; Qi, X. H. In 2011 Eighth International Conference on Fuzzy
521
Systems and Knowledge Discovery (FSKD) 2011; Vol. 3, p 1446-1449.
522
(34) Zeng, H. J.; Yang, R.; Liu, B.; Lei, L. F.; Li, J. J.; Qu, L. B. J. Pharmaceut. Anal.
523
2012, 2, 214-219.
524
(35) Zhao, C. B.; Liu, W.; Ling, H. L.; Lu, S. X.; Zhang, Y. L.; Liu, J. T.; Xi, R. M. J
525
Agr. Food Chem. 2007, 55, 6879-6884. 19
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
526
(36) Zhao, Y. L.; Zhang, G. P.; Liu, Q. T.; Teng, M.; Yang, J. F.; Wang, J. H. J Agr.
527
Food Chem. 2008, 56, 12138-12142.
528
(37) Zhi, A. M.; Li, B. B.; Liu, Q. T.; Hu, X. F.; Zhao, D.; Hou, Y. Z.; Deng, R. G.;
529
Chai, S. J.; Zhang, G. P. Food Agr. Immunol. 2010, 21, 335-345.
530
20
ACS Paragon Plus Environment
Page 20 of 28
Page 21 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
531
Figure Captions
532
Figure 1 The structures of quinolones
533
Figure 2 ciELISA calibration curves for pipemidic acid with different coating
534
antigens. Each point represented the mean ± standard deviation of three replicates.
535
Figure 3 CoMFA contour maps of pipemidic acid. (a-f) CoMFA streic contour maps
536
together with (a) embedded pipemidic acid, (b) embedded norfloxacin, (c) embedded
537
R-(+)-ofloxacin, (d) embedded S-(-)-ofloxacin, (e) embedded pefloxacin and (f)
538
embedded difloxacin. (g-h) CoMFA electrostatic contour maps together with (g)
539
embedded norfloxacin and (h) embedded sarafloxacin. The energies of all fields were
540
calculated with the weight of the standard deviation and the coefficient. Green, yellow,
541
blue, and red contours represent steric bulk desirable, steric bulk undesirable, positive
542
charge desirable and negative charge desirable, respectively.
543
Figure 4 CoMFA contour maps of clinafloxacin. (a-f) CoMFA streic contour maps
544
together with (a) embedded clinafloxacin, (b) embedded ciprofloxacin, (c) embedded
545
gatifloxacin, (d) embedded lomefloxacin, (e) embedded R-(+)-ofloxacin, (f)
546
embedded S-(-)-ofloxacin and (g) embedded sarafloxacin. CoMFA electrostatic
547
contour maps together with (h) embedded clinafloxacin, (i) embedded gatifloxacin, (j)
548
embedded lomefloxacin. The energies of all fields were calculated with the weight of
549
the standard deviation and the coefficient. Green, yellow, blue, and red contours
550
represent steric bulk desirable, steric bulk undesirable, positive charge desirable and
551
negative charge desirable, respectively.
552
21
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 22 of 28
553
Table 1 Cross-reactivity of pipemidic acid and 22 quinolone drugs based on coating
554
antigen lomefloxacin –OVA. IC50
CR
IC50
CR
Name
Name (nmol/mL)
(%)
(nmol/mL) (%)
Pipemidic acid
0.0076
100.0
Danofloxacin
0.21
3.6
Rufloxacin
0.026
29.5
Garenoxacin
0.23
3.3
Prulifloxacin
0.026
28.8
S-(-)-ofloxacin
0.26
2.9
Norfloxacin
0.054
14.1
Pazufloxacin
0.27
2.8
Pefloxacin
0.056
13.4
Clinafloxacin
0.49
1.5
Enrofloxacin
0.071
10.7
Gatifloxacin
0.50
1.5
Oxolinic acid
0.082
9.2
Marbofloxacin
0.96
0.8
Ofloxacin
0.090
8.4
Difloxacin
1.49
0.5
R-(+)-ofloxacin
0.10
7.3
Sarafloxacin
2.32
0.3
Ciprofloxacin
0.14
5.4
Sparfloxacin
2.53
0.3
Lomefloxacin
0.21
3.7
Tosufloxacin
2.91
0.3
22
ACS Paragon Plus Environment
Page 23 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
555 556 557
Analytical Chemistry
Table 2 Models of the minimum energy conformations of the quinolones from the immunoassay for pipemidic acid and for clinafloxacin. The elements are represented in the following manner: oxygen, red; nitrogen, navy blue; hydrogen, baby blue; fluorine, green; carbon, white.; sulphur, yellow. Shape Characteristic Models of the minimum energy conformations of the quinolones a I High-specificity Nalidixic acid P
ф
Y
Oxolinic acid
Pipemidic acid
High-specificity Clinafloxacin
Danofloxacin
Tosufloxacin
Difloxacin
Enrofloxacin
Gatifloxacin
Lomefloxacin
Pefloxacin
Rufloxacin
R-(+)-ofloxacin
S-(-)-ofloxacin
Garenoxacin
Prulifloxacin
Sparfloxacin
Marbofloxacin
Ciprofloxacin
Norfloxacin
Pazufloxacin
Sarafloxacin
High-specificity
b
Broad-specificity
558
a
High-specificity means the structurally related quinolones whose cross-reactivity values over 15% were less than 3 kinds.
559
b
Broad-specificity means most of the structurally related quinolones whose cross-reactivity values over 15%.
23
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
560
TOC
561
24
ACS Paragon Plus Environment
Page 24 of 28
Page 25 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
Figure 1 The structures of quinolones 209x120mm (300 x 300 DPI)
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Figure 2 ciELISA calibration curves for pipemidic acid with different coating antigens. Each point represented the mean ± standard deviation of three replicates. 296x209mm (300 x 300 DPI)
ACS Paragon Plus Environment
Page 26 of 28
Page 27 of 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Analytical Chemistry
Figure 3 CoMFA contour maps of pipemidic acid. (a-f) CoMFA streic contour maps together with (a) embedded pipemidic acid, (b) embedded norfloxacin, (c) embedded R-(+)-ofloxacin, (d) embedded S-(-)ofloxacin, (e) embedded pefloxacin and (f) embedded difloxacin. (g-h) CoMFA electrostatic contour maps together with (g) embedded norfloxacin and (h) embedded sarafloxacin. The energies of all fields were calculated with the weight of the standard deviation and the coefficient. Green, yellow, blue, and red contours represent steric bulk desirable, steric bulk undesirable, positive charge desirable and negative charge desirable, respectively. 147x147mm (300 x 300 DPI)
ACS Paragon Plus Environment
Analytical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Figure 4 CoMFA contour maps of clinafloxacin. (a-f) CoMFA streic contour maps together with (a) embedded clinafloxacin, (b) embedded ciprofloxacin, (c) embedded gatifloxacin, (d) embedded lomefloxacin, (e) embedded R-(+)-ofloxacin, (f) embedded S-(-)-ofloxacin and (g) embedded sarafloxacin. CoMFA electrostatic contour maps together with (h) embedded clinafloxacin, (i) embedded gatifloxacin, (j) embedded lomefloxacin. The energies of all fields were calculated with the weight of the standard deviation and the coefficient. Green, yellow, blue, and red contours represent steric bulk desirable, steric bulk undesirable, positive charge desirable and negative charge desirable, respectively. 198x286mm (300 x 300 DPI)
ACS Paragon Plus Environment
Page 28 of 28