From Molecular Design and Materials Construction to Organic

Oct 24, 2014 - Overall, the versatile features of organic materials are highlighted, because they brings tunable optical properties based on molecular...
0 downloads 0 Views 8MB Size
Article pubs.acs.org/accounts

From Molecular Design and Materials Construction to Organic Nanophotonic Devices Chuang Zhang, Yongli Yan, Yong Sheng Zhao,* and Jiannian Yao* Beijing National Laboratory for Molecular Sciences (BNLMS), Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China CONSPECTUS: Nanophotonics has recently received broad research interest, since it may provide an alternative opportunity to overcome the fundamental limitations in electronic circuits. Diverse optical materials down to the wavelength scale are required to develop nanophotonic devices, including functional components for light emission, transmission, and detection. During the past decade, the chemists have made their own contributions to this interdisciplinary field, especially from the controlled fabrication of nanophotonic molecules and materials. In this context, organic micro- or nanocrystals have been developed as a very promising kind of building block in the construction of novel units for integrated nanophotonics, mainly due to the great versatility in organic molecular structures and their flexibility for the subsequent processing. Following the pioneering works on organic nanolasers and optical waveguides, the organic nanophotonic materials and devices have attracted increasing interest and developed rapidly during the past few years. In this Account, we review our research on the photonic performance of molecular micro- or nanostructures and the latest breakthroughs toward organic nanophotonic devices. Overall, the versatile features of organic materials are highlighted, because they brings tunable optical properties based on molecular design, size-dependent light confinement in low-dimensional structures, and various device geometries for nanophotonic integration. The molecular diversity enables abundant optical transitions in conjugated π-electron systems, and thus brings specific photonic functions into molecular aggregates. The morphology of these micro- or nanostructures can be further controlled based on the weak intermolecular interactions during molecular assembly process, making the aggregates show photon confinement or light guiding properties as nanophotonic materials. By adoption of some active processes in the composite of two or more materials, such as energy transfer, charge separation, and exciton−plasmon coupling, a series of novel nanophotonic devices could be achieved for light signal manipulation. First, we provide an overview of the research evolution of organic nanophotonics, which arises from attempts to explore the photonic potentials of low-dimensional structures assembled from organic molecules. Then, recent advances in this field are described from the viewpoints of molecules, materials, and devices. Many kinds of optofunctional molecules are designed and synthesized according to the demands in high luminescence yield, nonlinear optical response, and other optical properties. Due to the weak interactions between these molecules, numerous micro- or nanostructures could be prepared via self-assembly or vapor-deposition, bringing the capabilities of light transport and confinement at the wavelength scale. The above advantages provide great possibilities in the fabrication of organic nanophotonic devices, by rationally combining these functional components to manipulate light signals. Finally, we present our views on the current challenges as well as the future development of organic nanophotonic materials and devices. This Account gives a comprehensive understanding of organic nanophotonics, including the design and fabrication of organic micro- or nanocrystals with specific photonic properties and their promising applications in functional nanophotonic components and integrated circuits.

1. INTRODUCTION The discovery of conductive polymers has encouraged the rapid growth in the research field of organic electronics and optoelectronics, including organic light-emitting diodes,1 fieldeffect transistors,2 and solar cells3 from both molecular and polymeric materials. Their properties are highly tunable by changing the energy levels of ground and excited states in πelectron systems. The excited states in organic materials with low dielectric constants are Frenkel excitons, which have high © XXXX American Chemical Society

binding energy and are localized within one or two molecules. This excitonic feature makes organics fundamentally different from their inorganic counterparts in both electronic and photonic aspects. Recently, photonics at the (sub)wavelength scale, namely, nanophotonics, has been developing rapidly during the rise of Received: May 24, 2014

A

dx.doi.org/10.1021/ar500192v | Acc. Chem. Res. XXXX, XXX, XXX−XXX

Accounts of Chemical Research

Article

nanoscience and nanomaterials.4 For example, the quantum dots showed unique size-dependent light emission due to the quantum confinement properties,5 while the one-dimensional (1D) nanostructures were proven to guide light at the wavelength scale.6 By designing nanometric geometries, nanophotonic integration not only seems accessible but also takes advantage of high operation frequency and low power consumption. In organic nanomaterials, light confinement and guiding were also demonstrated.7 Interestingly, some organic nanofibers, with even smaller sizes than the wavelength, showed unexpectedly high efficiency in self-guided light emission.8,9 It revealed a distinct picture when the photoluminescence of molecules was guided, referred to as active optical waveguiding, which could be attributed to the coupling between excitons and photons in organic materials.10,11 Thereby from the viewpoints of exciton type and binding energy, researchers started to pay attention to the significant differences between organic and inorganic materials in nanophotonic applications.12 The binding energy of Frenkel excitons (∼100 meV) is almost 2 orders of magnitude larger than that of Wannier excitons in inorganic semiconductors.13 They are stable at room temperature (kT = 25.6 meV) and thus can participate in light guiding processes. Photon transport in nanomaterials largely relies on molecular packing and microscopic morphology.14 The self-assembly of organic molecules brings a promising fabrication technique for organic micro- or nanocrystals with well-defined shapes, tunable sizes, and defect-free structures. These micro- or nanocrystals with higher refractive index than their environment can serve as optical waveguides to transmit photons or optical microcavities to confine photons. They combined the basic concepts in integrated photonics and the photonic properties of π-electron systems and thus became novel functional nanophotonic units.7,12 The prototypes of organic nanophotonic devices were achieved in composite structures of donor and acceptor molecules via manipulation of energy transfer at micro- or nanoscale.15 Organic nanophotonics (Scheme 1) benefits from the rational design of functional molecules, the facile synthesis of low-dimensional materials, and new possibilities for device geometries. In this Account, we summarize the recent advances in organic nanophotonic molecules, materials, and devices, with an emphasis on structural and functional tunability due to the versatility of organics. The following content is divided into three parts, including the molecular design for specific nanophotonic properties, the construction of micro- or

nanosized materials for light guiding and photon confining, and the prototype demonstration of organic nanophotonic devices.

2. DESIGN OF MOLECULAR STRUCTURES FOR PHOTONIC FUNCTIONALITIES Light absorption and emission in conjugated molecules are from the transition of π electrons. As displayed in Figure 1, 9,10-bis(phenylethynyl)anthracene (BPEA) shows green fluorescence (450−550 nm) with a high efficiency of 0.96.16 Similarly, rubrene molecules with an enlarged π system can give a 0.98 quantum yield of orange light emission (500−650 nm).17 The close energy levels facilitate radiative transition, but nonradiative processes could dominate if the energy gap becomes too small. This explains why the efficiency of nearinfrared dyes is still limited. The planar molecules are tightly packed in crystals by π−π stacking, which is beneficial for the fabrication of micro- or nanocrystals; however, the fluorescence may also be shifted or quenched because of the interference of nearby π systems.18 By introducing N atoms in the molecules (like 1,3,5-triphenyl-2pyrazoline (TPP) and 2,4,5-triphenylimidazole (TPI) in Figure 1), we can increase the intermolecular distance and maintain the light emission properties of single molecules in micro- or nanocrysyals.19 The crystal growth can be driven by many other kinds of weak interactions (hydrogen bonds, van de Waals force, etc.) besides π−π stacking.20 The additional side groups can also change the molecular packing and are helpful in tailoring the shape of micro- or nanocrystals. For example, 2-acetyl-6-methylaminonaphthalene (AMN) molecules showed balanced π−π stacking and hydrogen bonds in two crystal directions, resulting in the formation of two-dimensional structures during molecular assembly.14 The side groups can also make the nanocrystals of 1,5-diaminoanthraquinone (DAAQ) grow much faster on the substrates with higher surface energies, bringing possibilities to prepare vertically aligned nanowire arrays via vapor deposition.21 Coordination complexes provide an alternative way to tune the optical properties of organic compounds. One of them, tris(8-hydroxyquinolinato)aluminum (Alq3), can maintain its strong light emission and charge transport ability in nanowires based on the metal to ligand charge transfer (MLCT).22 When heavy metal atoms are included, the strong spin−orbit coupling facilitates intersystem crossing (ISC) to form triplets. Strong phosphorescence was observed in tris(bipyridine)ruthenium(II) chloride (Ru(bpy)3) from the MLCT3 states by either optical or electrochemical methods.23 Moreover, these compounds serve as triplet sensitizers24 in triplet−triplet annihilation (TTA) systems, giving upconverted fluorescence under low excitation power.25 Linear optical processes in organic nanomaterials have been mentioned in other reviews.7,12,15 Here, we introduce some recent works on the nonlinear optical properties in organic micro- or nanostructures toward coherent light manipulation.

Scheme 1. Roadmap for Organic Nanophotonics: Molecules, Materials, and Devices

2.1. Highly Luminescent Molecules for Low-Threshold Stimulated Emission

A solid-state laser based on organic molecular crystals not only serves as a light source in photonic integration but also brings coherent operation in light manipulation.19 Oligomeric phenylene vinylene (OPV) is known as a strong light-emitting molecular structure, while its polymer analog poly(p-phenylene B

dx.doi.org/10.1021/ar500192v | Acc. Chem. Res. XXXX, XXX, XXX−XXX

Accounts of Chemical Research

Article

Figure 1. Typical molecules used in fabricating micro- or nanocrystals for photonic applications.

Figure 2. (A) Molecular structure and (B) molecular packing of the OPV derivative. (C) Fluorescence and stimulated emission spectra below and above the threshold, respectively.

Figure 3. (A) TPA cross section in DPBT molecules. Inset, molecular structure. (B) Two-photon pumped emission from a DPBT single-crystal nanowire excited with a 750 nm pulsed laser. Inset, crystal structure.

avoids coupling between neighboring π systems. Moreover, the molecular packing restricts the rotation of side groups and brings aggregation induced enhanced emission.28 Therefore, the low-threshold stimulated emission could be observed when using this OPV molecule as the optical gain material (Figure 2C).

vinylene) (PPV) has shown great potential in lasing action.26 By addition of cyano and phenylaniline side groups (Figure 2A), the π system in OPV structure can be isolated from the surrounding chemical environment to maintain the optical transitions.27 As shown in Figure 2B, the molecular distance in the crystal of this OPV derivative can be as large as 10 Å, which C

dx.doi.org/10.1021/ar500192v | Acc. Chem. Res. XXXX, XXX, XXX−XXX

Accounts of Chemical Research

Article

Figure 4. (A) Molecular structures of PNA and β-CD molecules. (B) Channel and cage structures for PNA@β-CD supramolecular composites. (C) SHG signals from PNA@β-CD with a 830 nm fundamental wave.

The fluorescence increases linearly with the pump power, while lasing emerges and grows much faster above the threshold. This nonlinear feature may offer a remarkable on− off ratio in optical switching when operated near the threshold. In addition, polariton states from strong exciton−photon coupling in organic materials have been recently demonstrated,29 which bring new possibilities in organic polariton lasers and other polariton-based nanophotonic devices.

requires asymmetric properties not only in molecular structures but also in the method of molecular packing to maintain the macroscopic polarity. We used a supramolecular strategy to solve the above problem, in which the inclusion of PNA in β-cyclodextrin (βCD) molecules induced the directional packing of dipoles in the composite crystals (Figure 4A).34 Therefore, the asymmetry of PNA molecules could be protected by the encapsulated βCD, showing optical nonlinearity from as-prepared microcrystals. The host−guest system can form two types of molecular alignment (channel and cage) in the supramolecular microcrystals, as shown in Figure 4B. The channel type shows one-dimensional alignment of PNA molecules with the maximized asymmetry in molecular packing. As a result, SHG signals could be observed in both microcrystals, but the output intensity in the cage type is lower because of its reduced crystal asymmetry (Figure 4C). The organic molecules show great potential in optical nonlinearities, including stimulated emission, two-photon absorption, and frequency conversion. In addition, most of these optical properties are highly tunable according to the molecular structures, resulting in plenty of room in tailoring organic nanophotonic materials for light signal manipulation. Thus, we can adopt or synthesize specific molecules toward the functionalities that we need.

2.2. D−π−A Molecules for Two-Photon Emission and Lasing

The high photoactivity of organic molecules allows for the realization of higher order nonlinearity in organic nanophotonics. Two-photon-absorption (TPA) is a third-order nonlinear optical property, which means that the molecule can simultaneously absorb two photons to form a higher energy excited state and may emit one upconverted photon (twophoton emission, TPE). In this case, intermolecular charge transfer in the donor (D)−π bridge−acceptor (A) structure is often needed to establish the permanent ground-state dipole moment as well as the transition dipole.30 As shown in Figure 3A, 2-(N,N-diethylanilin-4-yl)-4,6bis(3,5-dimethylpyrazol-1-yl)-1,3,5-triazine (DPBT) was designed and synthesized with a large TPA cross section over 200 Goeppert−Mayer units (GM) and a high fluorescence quantum yield of 0.75.31 This molecule gives a strong TPA over 700−800 nm and shows a bright cyan light emission under two-photon excitation. Furthermore, the DPBT molecules can form defect-free 1D nanocrystals by the intermolecular π stacking (Figure 3B), which can further enhance the nonlinear performance by the cavity effect.32 As a result, DPBT nanocrystals can serve as two-photon pumped nanolasers, offering wavelength upconversion for coherent light manipulation.

3. CONSTRUCTION OF LOW-DIMENSIONAL MATERIALS FOR LIGHT GUIDING AND PHOTON CONFINEMENT Organic micro- or nanocrystals benefit from the facile preparation, the defect-free morphology, and the controllable sizes and shapes,35 making it very applicable to nanophotonics. The construction methods such as liquid-phase assembly, physical vapor deposition, and template synthesis have been discussed elsewhere.7 Here we describe some fundamental concepts and strategies about how molecules aggregate into crystals, and why their dimensions can be tuned. The intermolecular interactions, including hydrogen bonds (∼5−30 kJ/mol), π−π interaction (∼8−12 kJ/mol), and van der Waals force (∼2−4 kJ/mol), are weaker than the chemical bonds between atoms (∼150−1000 kJ/mol). Therefore, the organic crystal morphology is largely dependent on the molecular structure and also the style of molecular packing. Optofunctional molecules usually have large π-conjugated

2.3. Charity Supramolecules for Second Harmonic Generation

The D−π−A structure provides the necessary dipole moment by charge transfer for nonlinear response to incident light. Even some very simple molecules with D−π−A structures, like pnitroaniline (PNA) in Figure 4A, show high optical nonlinearities in second harmonic generation (SHG).33 As a typical kind of frequency upconversion of coherent light, SHG is independent of the incident wavelength, highly polarized, and accomplished in very short response time. However, SHG D

dx.doi.org/10.1021/ar500192v | Acc. Chem. Res. XXXX, XXX, XXX−XXX

Accounts of Chemical Research

Article

structures; thus π−π interaction becomes an important driving force in their crystal growth. In some molecules with N−H or O−H groups, hydrogen bonds may play an extraordinary role in the molecular packing,20 while van der Waals force often dominates the assembly process of macromolecular systems. As displayed in Figure 5, the formation of amorphous particles is often observed immediately when the molecules

photons in all dimensions to realize optical cavity effects. In the following subsections, we will discuss how these organic microor nanocrystal structures were fabricated and used as these two fundamental nanophotonic elements at the wavelength scale. 3.1. Optical Waveguiding in One- and Two-Dimensional Organic Crystal Materials

The phenomenon of photon transporting (optical waveguiding) was observed in many high-quality low-dimensional organic materials.39 Notably, the guiding of light emission is often more efficient than that of incident light in these materials. One important reason is that the isotropic fluorescence from the molecular excited states can avoid the mismatching of incident angle in the light coupling into waveguide modes. Recently, we found that the optical waveguiding characteristics are totally different in 1D and 2D microstructures, even when the molecular structures were very similar (2-acetyl-6dimethylaminonaphthalene (ADN) and 2-acetyl-6-methylaminonaphthalene (AMN)).14 The organic nanowires show remarkable optical waveguiding to both tips (Figure 6A), and the relationship between output intensity and propagation distance can be fitted with the exponential decay function (Figure 6B) according to the loss mechanism of photon reabsorption. Interestingly, the light guiding became obviously asymmetric in 2D structures despite the excitation positions, as shown in Figure 6C. This means that 2D packing of molecules can block the photon transport unidirectionally, probably by asymmetric dipole coupling between nearby molecular units. As illustrated in Figure 6D, the ratio of output intensity in opposite directions could be up to 103, showing potential applications as optical isolators at microscale. It may overcome some fundamental limitations in previous optical waveguiding materials, since the molecular orientation may affect the light

Figure 5. Scheme for molecular packing into micro- or nanocrystals with varied shapes.

aggregate together from the solution. If the preparation conditions are intentionally controlled to encourage ordered molecular packing, various crystalline micro- or nanostructures could be obtained.36 Usually, an internal or external preferred growth direction can align molecules one by one into 1D structures, such as rods, wires, and belts. The flexibility of 1D molecular aggregates provides possibilities to construct tubular structures like rings and tubes. In this case, other driving forces like hydrophobic or hydrophilic interactions are required to modify the growth process of micro- or nanocrystals.37 If two kinds of forces in two growth directions are balanced with each other, the assemblies result in a 2D structure (sheets, tiles, etc.) by cross packing of molecules.38 Organic crystals with a higher refractive index over the surrounding environment can trap photons in one or two dimensions as optical waveguides or even totally confine

Figure 6. (A) Optical waveguiding in organic nanowires of ADN (scale bar is 5 μm) and (B) corresponding light transporting versus propagation length. (C) Directional optical waveguiding in 2D organic structures of AMN (scale bar is 10 μm) and (D) out-coupled emission from different edges. E

dx.doi.org/10.1021/ar500192v | Acc. Chem. Res. XXXX, XXX, XXX−XXX

Accounts of Chemical Research

Article

Figure 7. (A) Electric field distribution in 2-(N,N-diethylanilin-4-yl)-4,6-bis(3,5-dimethylpyrazol-1-yl)-1,3,5-triazine organic nanowire F−P cavity, and (B) modulated spectra with different cavity lengths. (C) Electric field distribution of WGM resonance and (D) modulated spectra from single 1,5-diphenyl-1,4-pentadien-3-one organic microrings.

Figure 8. (A) Microscopy image of 1,2,3,4,5-pentaphenyl-1,3-cyclopentadiene assembled ordered 1D nanostructures. Microscopy images of (B) vertically grown 1,5-diaminoanthraquinone nanowire arrays and (C) nanowire patterns toward nanophotonic integration of optical waveguides and cavities. Scale bars are 5, 1 and 25 μm, respectively.

the cavity, introducing a series of sharp peaks in the modulated output spectrum from wire ends (Figure 7B). The space between nearby peaks is inversely proportional to the length of nanowire cavity, so the larger cavity can support more resonance modes. The quality factor (Q) is often