Highly Efficient Hybrid White Organic Light-Emitting Diodes with

3 days ago - ... ylphenyl) amine (TCTA) for lowering hole-injection barrier, along with the bipolar and high photoluminescence quantum yield (Φp= 84 ...
2 downloads 27 Views 3MB Size
Subscriber access provided by AUSTRALIAN NATIONAL UNIV

Article

Highly Efficient Hybrid White Organic Light-Emitting Diodes with Single Emission Layer by Solution-Process Jun-Yi Wu, and Show-An Chen ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.7b14695 • Publication Date (Web): 29 Dec 2017 Downloaded from http://pubs.acs.org on December 29, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 39 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

1

Highly Efficient Hybrid White Organic Light-Emitting Diodes with Single

2

Emission Layer by Solution-Process

3 4 5

Jun-Yi Wu and Show-An Chen*

6

Chemical Engineering Department and Frontier Research Center on Fundamental and

7

Applied Sciences of Matters, National Tsing-Hua University

8

Hsinchu 30013, Taiwan, ROC

9

*Corresponding author E-mail: [email protected]

10 thermally

activated

delay

fluorescence

(TADF),

TADF

blue

11

Keywords:

12

light-emitting diode (TADF BOLED), TADF-Phosphor hybrid white organic light

13

emitting diodes (T-P hybrid WOLED), mixed-host, low efficiency roll-off,

14

solution-process.

15 16 17

ABSTRACT

18

We use the mixed host, 2,6-bis(3(carbazol9yl)phenyl)pyridine (26DCzPPy)

19

blending with 20 wt % tris(4-carbazoyl-9- ylphenyl) amine (TCTA) for lowering

20

hole-injection barrier, along with the bipolar and high photoluminescence quantum

21

yield

22

9,9-dimethyl-9,10-dihydroacridine-2,4,6-triphenyl-1,3,5-triazine

(Φp=

84

%)

blue

TADF

1 ACS Paragon Plus Environment

material (DMAC-TRZ)

of as

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

blue dopant to compose of the emission layer for fabricating the TADF blue organic

2

light emitting diode (BOLED). The device realizes highly efficient device with the

3

performance parameters: maximum brightness (Bmax) 57586 cd/m2, maximum current

4

efficiency (CEmax) 35.3 cd/A, maximum power efficiency (PEmax) 21.4 lm/W,

5

maximum external quantum efficiency (EQEmax) 14.1% and CIE coordinates (0.18,

6

0.42). This device has the best performance record among the reported

7

solution-processed TADF BOLED, and has the low efficiency roll-off as such: at the

8

brightness as 1000 and 5000 cd/m2, its CEs are close, being 35.1 and 30.1 cd/A,

9

respectively. Further doping the red phosphor Ir(dpm)PQ2 (emission peak λmax=595

10

nm) into the blue emission layer, we obtain the TADF-Phosphor hybrid white OLED

11

(T-P hybrid WOLED) with the high performance: Bmax 43594 cd/m2, CEmax 28.8 cd/A,

12

PEmax 18.1 lm/W, and CIE (0.38, 0.44). This Bmax 43594 cd/m2 is better than that of

13

the vacuum -deposited WOLED with blue TADF emitter 10000 cd/m2. This is also the

14

first report on T-P hybrid WOLED with solution-processed emitting layer.

15 16

INTRODUCTION

17

White organic light-emitting diode (WOLED) is expected to be used as next

18

generation solid state lighting and large display applications, in which phosphorescent

19

emitters are usually included for taking the advantage of harvesting triplet excitons in 2 ACS Paragon Plus Environment

Page 2 of 39

Page 3 of 39 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

1

addition to singlet excitons, making the maximum internal quantum efficiency

2

(IQEmax) 100 % becomes possible and therefore leading to high device performance1-4.

3

For example, Kido and coworkers2 used 2,6-bis(3(carbazol9yl)phenyl)pyridine

4

(26DCzPPy) and tris(4-carbazoyl-9- ylphenyl) amine (TCTA) as the mixed-host and

5

the blue phosphor fac-tris(mesityl-2-phenyl-1H- imidazole) iridium(III) [fac-Ir(mpim)]

6

and red phosphor iridium(III) bis-(2-phenylquinoly- N,C2′) dipivaloyl-methane

7

[Ir(dpm)PQ2] as the guests to fabricate phosphorescent WOLED (PHWOLED) with

8

double emission layers by vacuum deposition method. They achieved the excellent

9

device performance: at 1000 cd/m2, external quantum efficiency (EQE) 24.4 %,

10

power efficiency (PE) 51.7 lm/W and Commission Internationale de L’Eclairage (CIE)

11

color coordinates (0.38, 0.42).

12

Recently, thermally activated delay fluorescence (TADF) emitters have been

13

proposed by Adachi and coworkers5 as attractive alternative emitter materials which

14

possess small energy gap between single and triplet states (∆EST