Highly Safe Ionic Liquid Electrolytes for Sodium ... - ACS Publications

Jul 25, 2016 - (10, 11) Elemental sodium is easy to recycle. .... The electrochemical windows of IL electrolytes were measured in a reformative three-...
2 downloads 0 Views 1MB Size
Subscriber access provided by Northern Illinois University

Article

Highly Safe Ionic Liquid Electrolytes for Sodium-Ion Battery: Wide Electrochemical Window and Good Thermal Stability Feng Wu, Na Zhu, Ying Bai, Libin Liu, Hang Zhou, and Chuan Wu ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.6b07054 • Publication Date (Web): 25 Jul 2016 Downloaded from http://pubs.acs.org on August 1, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 22

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Highly Safe Ionic Liquid Electrolytes for Sodium-Ion Battery: Wide Electrochemical Window and Good Thermal Stability Feng Wu†,‡, Na Zhu†, Ying Bai†,*, Libin Liu†, Hang Zhou†, Chuan Wu†,‡ † Beijing Key Laboratory of Environmental Science and Engineering, School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, PR China ‡ Collaborative Innovation Center of Electric Vehicles in Beijing, Beijing 100081, PR China KEYWORDS: ionic liquid; electrolyte; NaBF4; quantum chemical theoretical calculation; sodium- ion battery ABSTRACT: Novel ionic liquid (IL) electrolytes are prepared by mixing 1-ethyl-3-methylimidazolium-bis

tetrafluorobroate

(EMIBF4)

with

different

concentrations of sodium salt NaBF4. The as-prepared IL electrolytes displays wide electrochemical windows around 4V (1~5V), which are consistent with the quantum chemical theoretical calculation. The IL electrolyte with 0.1M NaBF4 shows excellent ionic conductivity, namely, 9.833×10-3 S·cm-1 at 20℃. In addition, non-flammability and good thermal stability are exhibited by combustion test and thermo-gravimetric analysis (TGA), which indicate highly safety of the IL electrolyte. 1. INTRODUCTION 1

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Lithium-ion batteries (LIBs) have been considered as the dominant charge storage units for high energy and power electrical application due to their high energy and power densities.1-5 However the application of LIBs for the widespread use faces important challenges linked with the high cost and availability of Li.6-9 These concerns have pushed to develop novel alternative energy storage devices which could replace LIBs. Sodium-ion batteries (SIBs) have rapidly captured much attention because of the abundant resources and low cost of sodium.10-11 The element sodium is easy to recycle.12-14 What’s more, sodium shares similar electrochemical properties and intercalation chemistry with lithium.15-16 The redox potentials of sodium and lithium differ of only 300mV.13, 17 An electrolyte plays an important role in secondary batteries, which governs the electrochemistry in a battery. At present, organic electrolytes such as NaClO4/ PC, NaPF6/EC-DEC and NaClO4/EC-DEC have been widely used.18 However, the organic solvent safety has always been a noticeable problem and restricted the development owing to high flammability, poor thermal stability, and low heat capacity19. RTILs characterized by wide electrochemical window, non-flammability, high ionic conductivity, high thermal stability improve safety for secondary batteries. 20-26 Ionic liquid 1-ethyl-3-methylimidazolium bis-(trifluoromethanesulfonyl) imide (EMITFSI), 1-butyl-3-methylimidazolium-bis (trifluoromethylsulfonyl) imide (BMITFSI) and 1-butyl-3-methylimidazolium tetraflu orobroate (BMIMBF4) were adopted as the electrolytes in the sodium-ion batteries in recent studies.26-27 However, BMIBF4 with 2

ACS Paragon Plus Environment

Page 2 of 22

Page 3 of 22

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

high viscosity showed low conductivity and inferior cell cycle performance.27 EMITFSI and BMITFSI with the corresponding sodium salt (NaTFSI) exhibited excellent ionic conductivities, up to 5.5 mS. cm-1 at room temperature, and a useful thermal window of - 86 to 150 ℃.26 As shown in Table 1, the issues of RTILs with EMI+

BMI+

and

(EMIBF4,

EMIPF6:

1-ethyl-3-methylimidazolium-bis

hexafluorophosphate, EMITFSI, BMIBF4, BMIPF6: 1-butyl-3-methylimidazolium-bis hexafluorophosphate, BMITFSI) are listed. Table 1. The comparison of primary imidazole-based RTILs (EMIBF4, EMIPF6, EMITFSI, BMIBF4, BMIPF6, BMITFSI) used in SIBs Anion Cation BF4-

PF-6

TFSI-

BMI+

Low conductivity

Low conductivity

Low conductivity

+

Show liquid state at

Shows solid state at

room temperature;

room temperature

High conductivity;

EMI

High cost

Low cost;

Therefore, considering the low conductivity of ILs with BMI+, high cost of EMITFSI and the solid state of EMIPF6 at room temperature, herein, we investigated the molecular structure and electrochemical performance of EMIBF4 and did the quantum chemical theoretical calculation. . Quantum chemical theoretical calculation can help design the composition of solution in secondary batteries.28-31 Quantum chemical theoretical calculation based on density functional theory (DFT) is used to evaluate the stability of a solvent molecule 3

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

due to its ability of gaining or losing electrons.20 The ability depends on frontier molecular orbital, including the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO). In theory, the lower HOMO energy is, the better oxidation resistance;The higher LUMO energy is, the better resistance to reduction.32 The RTIL electrochemical window is tested and speculated according to the results of quantum chemical theoretical calculation. In this work, the electrochemical properties of a promising RTIL EMIBF4 in combination with different concentrations (from 0.1 to 0.75M) of NaBF4 are investigated. With increasing concentration of the sodium salt, lower ionic conductivity and wider electrochemical window (>4V) are found, which has been confirmed by quantum chemical theoretical calculation. The IL electrolytes are proved to be non-flammable and stable under 380 ℃ . The GF/C and GF/D membranes are compatible with the IL electrolytes, which makes NaBF4/EMIBF4 electrolyte available in sodium-ion batteries. 2. EXPERIMENTAL SECTION 2.1. Preparation of IL Electrolytes

The pure IL EMIBF4 (99%) was purchased from Shanghai Cheng Jie Chemical Co.LTD, which was used as received. The water content of the electrolyte was measured using Karl-Fisher titration. It was found to be