Large-Scale, Uniform, and Superhydrophobic ... - ACS Publications

Jun 22, 2017 - School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798,. Singapore...
1 downloads 0 Views 2MB Size
Subscriber access provided by TUFTS UNIV

Article

Large-Scale, Uniform and Superhydrophobic Titania Nanotubes at the Inner Surface of 1000-mm-Long Titanium Tubes Chengjie Xiang, Lidong Sun, Ye Wang, Guangchen Wang, Xiaoli Zhao, and Sam Zhang J. Phys. Chem. C, Just Accepted Manuscript • Publication Date (Web): 22 Jun 2017 Downloaded from http://pubs.acs.org on June 23, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

The Journal of Physical Chemistry C is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 24

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

Large-Scale, Uniform and Superhydrophobic Titania Nanotubes at the Inner Surface of 1000-mm-Long Titanium Tubes Chengjie Xiang,1 Lidong Sun,1,∗ Ye Wang,1 Guangchen Wang,1 Xiaoli Zhao,1 Sam Zhang2,∗

1

State Key Laboratory of Mechanical Transmission, School of Materials Science and

Engineering, Chongqing University, Chongqing 400044, PR China 2

School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50

Nanyang Avenue, Singapore 639798, Singapore

ACS Paragon Plus Environment

1

The Journal of Physical Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 24

ABSTRACT

Large scale and mass production of uniform nanostructured materials have been a focusing challenge. Anodic titania nanotubes have been widely employed in various applications, which are usually demonstrated with limited size and planar geometry. In this study, a coaxial electrochemical anodization approach is explored and reported. With this method, uniform titania nanotube arrays are produced at the inner surface of titanium tubular electrodes of 1000 mm in length and 10 mm in diameter, in good contrast to the nonuniform nanotubes attained with conventional anodizing scheme. Such an approach is cost-effective and energy-efficient. It is also capable of processing other valve metals possible for anodization, and even longer tubular substrates. The wetting property of the resulting nanotube arrays are further tailored, with a maximum contact angle of 166° for water and 163° for glycerol, exhibiting a superhydrophobic feature. An equation is derived to compute the intrinsic contact angle of a spherical droplet on an asymmetric tubular substrate, based on measurable apparent contact angle, droplet radius and tube radius. Such a superhydrophobic tube with a sliding angle of