Light-Directed Tuning of Plasmon Resonances via ... - ACS Publications

Apr 25, 2017 - ... access article published under a Creative Commons Attribution (CC-BY) .... (St), (c) methyl methacrylate (MMA), (d) acrylic acid (A...
0 downloads 0 Views 905KB Size
Subscriber access provided by University of Florida | Smathers Libraries

Article

Light-Directed Tuning of Plasmon Resonances via Plasmon-Induced Polymerization Tao Ding, Jan Mertens, Anna Lombardi, Oren A Scherman, and Jeremy J. Baumberg ACS Photonics, Just Accepted Manuscript • Publication Date (Web): 25 Apr 2017 Downloaded from http://pubs.acs.org on April 25, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Photonics is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Photonics

Light-Directed Tuning of Plasmon Resonances via Plasmon-Induced Polymerization Tao Ding*†, Jan Mertens†, Anna Lombardi†, Oren A. Scherman*‡, and Jeremy J. Baumberg*† †Nanophotonics Centre, Cavendish Laboratory, University of Cambridge, CB3 0HE, United Kingdom; ‡Melville Laboratory for Polymer Synthesis, Department of Chemistry, University of Cambridge, Lensfield Road, CB2 1EW, United Kingdom Abstract: The precise morphology of nanoscale gaps between noble-metal nanostructures controls their resonant wavelengths. Here we show plasmon-induced polymerization can locally enlarge the gap size, and tune the plasmon resonances. We demonstrate light-directed programmable tuning of plasmons can be self-limiting. Selective control of polymer growth around individual plasmonic nanoparticles is achieved, with simultaneous real-time monitoring of the polymerization process insitu using dark field spectroscopy. Even without initiators present, we show light-triggered chain growth of various monomers, implying plasmon-initiation of free-radicals via hot electron transfer to monomers at the Au surface. This concept not only provides a programmable way to fine-tune plasmons for many applications, but also provides a window on polymer chemistry at the subnanoscale. Keywords: plasmons, gold, hot electrons, nanoparticles, films Plasmons, composed of oscillations of free electrons on noble metal surfaces, have triggered the discovery of many new phenomena in nanophotonics over the last two decades, leading to promising applications in surface-enhanced spectroscopies,1 plasmon-assisted photocatalysis,2, 3 water splitting,4, 5 plasmon-mediated resist exposure,6-10 plasmonic solar cells,11 and photothermal therapies.12 Such effects arise from the localized field enhancements or from plasmon-induced hot carriers.13, 14 It is highly desirable to match the excitation wavelength with plasmon resonances so that optimal enhancement or efficiency can be achieved in these diverse applications. In addition, ultralow-power switching of the resonances fostered by their small optical mode volumes achieved can enable new classes of optoelectronic devices. Two tuning strategies are available: changing the refractive index of spacer layers inside plasmonic gaps, or changing the gap size itself. Unfortunately the former strategy has not been effective so far. The combination of plasmonic metals with reconfigurable soft-polymer spacers is thus of great interest, to achieve on-demand tuning of

plasmons. Previous tuning methods using either chemical15-17 or physical18-20 mechanisms yield less-useful abrupt spectral shifts. More recently, light-assisted tuning has enabled continuous tuning but demands active feedback via in-situ monitoring yielding low throughput.21-23 Here we introduce the concept of autonomous and programmed tuning based on plasmoninduced polymerization within the nanogaps, which enables trimming of plasmon resonances to the desired spectral position. Monomer polymerization in a nanogap expands its volume, thereby blue-shifting the plasmon resonances strongly. As the plasmon shifts away from the excitation wavelength, polymer growth terminates thus stabilizing the plasmon resonances. Such a self-limiting mechanism makes it possible to program tuning by selecting irradiation wavelength and composition of the monomers. We show this process is generic to a large class of free-radical polymerizations, including of functional electronic polymer materials. RESULTS AND DISCUSSION Tuning plasmons with polymerization

ACS Paragon Plus Environment

1

ACS Photonics 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

To set the initial gap, the Au substrate is coated with a thiophenol self-assembled monolayer of thickness 0.6 nm, followed by drop-casting 80 nm Au NP on top. This Au nanoparticle-on-mirror (NPoM) confines strong optical fields (several hundred times the incident field) within the nanogap.24 The surface-coupled plasmon mode of such plasmonic structures is exquisitely sensitive to the gap size and contents,25-28 thus giving a means to tune the nanogap spacing on demand as well as to precisely track the polymer growth around each gold nanoparticle. The initial colour of the coupled plasmonic resonance from each NPoM is within 10 nm of 800 nm showing the high degree of robust construction of this architecture. Irradiation with 635 nm continuous wave (CW) laser light on these Au NPoMs (0.2 mW/µm2) completely immersed in a bulk monomer of divinylbenzene (DVB) (Supporting information (SI)-Scheme S1) is found to increase the gap size. This results in a 70 nm spectral blue shift (from 800 nm to 730 nm) of the coupled plasmon resonance within 400 s (Figure 1a). As long as the concentration of DVB is larger than 20% by volume, polymer growth is observed. While normally, increasing the dielectric constant in

the gap results in a plasmon red-shift, here changes in refractive index of 80ºC for most monomers).7 Therefore, such polymerization seems to be caused by the plasmons. Several mechanisms have been suggested previously including plasmon resonance energy transfer34, 35 or plasmon-induced charge transfer, which shuttles hot electrons or holes from the metal surface layers.36, 37 As photo-excited carriers in

ACS Paragon Plus Environment

3

ACS Photonics 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

the Au are given energies < 2 eV, this is insufficient to directly initiate polymerization (which requires ultraviolet photons), through any possible field-enhanced energy transfer. Different to previous plasmon chemistries36, 38 instead here we suggest the initiation is via hot electrons, not through a redox reaction route (which does not work for acrylates), but through formation of [AuC-C●] species near the metal surface which induces further polymer chain growth (Scheme 1 and SI-Scheme S2). Formation of Au-C bonds is identified in a number of previous reports,39, 40 and plausible in our case although physical attachment is also possible.41 We find the thickest shells around these Au NPs (Figure 1d) are formed from irradiating DVB monomers which indicates a reduced chain termination rate arising when PDVB crosslinks, that comes from the sterics of this polymerization that reduces the chances of two radical chain-ends meeting. The polymerization process is thus initiated by electrons hopping onto monomers at the Au surface only, followed then by radical chain polymerization zipping up each long chain up to a certain distance away where termination occurs.

Page 4 of 11

This hot-electron mediated radical initiation mechanism implies that irradiation in the presence of any monomers that can be radically polymerized should be able to expand the nanogaps in Au NPoMs and blue-shift the plasmon resonances. Therefore, we test on a range of monomers and directly watch in real time the progression of polymerization from the spectral shifts of the coupled plasmon mode (Figure 3). Molecules containing vinyl bonds (which are polymerizable) lead to blue shifts of the coupled plasmons after irradiation although the shift extent is different for different monomers (Figure 3f). We suggest this is due to a difference in radical chain termination rates, which results in different polymer chain lengths. By contrast, no blue shift is observed (i.e. no polymerization is present in the gap) for small molecules that do not contain vinyl bonds, such as ethylbenzene (EB) (Figure 3e). This verifies that the shells around the Au NPs are indeed made of polymers rather than carbonization products of small organic molecules. Alongside these blue-shifts the scattering intensity also increases, which is due to the decreasing residual intraband absorption of Au at longer wavelength (700-800 nm) as the plasmon shifts to higher energy. We also find the polymerization of functional electronic materials such as P3HT is possible using this route although the mechanism still needs further clarification (SI Fig.S3).

Scheme 1 Hot-electron initiation mechanism.

ACS Paragon Plus Environment

4

Page 5 of 11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Photonics

Figure 3 Polymerization in different monomers tracked by scattering spectra of Au NPoM. (a-e) Irradiation in monomers of (a) DVB, (b) styrene (St), (c) methyl-methacrylate (MMA), (d) acrylic acid (AA), and (e) control with ethylbenzene (EB) which is not polymerizable. Laser on for 200 s, 635 nm, 0.2 mW. (f) Maximum spectral blue shift of the coupled plasmon for different monomers, error bars show range of trials.

Wavelength-controlled feedback Since the polymerization process is closely related to the efficiency of hot electron injection, it is optimal to excite the system close to its coupled plasmon resonance. However, the shifts of the plasmon resonance due to polymerization modify the spectral match between laser wavelength and coupled plasmonic resonance during the irradiation. Actively tracking the plasmon shift using a tunable OPO laser source avoids this problem so that the hot electron generation remains maximized. We observe a continuous blue shift of the coupled plasmonic resonance from 760 to 680 nm (~80 nm shift) using an irradiation laser wavelength which is tuned to follow the plasmon mode from 780 nm down to 633 nm while keeping the power constant at 10 µW (average power, 200fs pulses) (Figure 4a). The extracted spectral blue-shifts with irradiation time depict the polymerization process in time (Figure 4b). Initially, a 780 nm laser illuminates a single nanoparticle possessing a coupled plasmon mode at 760 nm. The plasmon peak gradually blue shifts and eventually saturates at 718 nm. This saturation arises because the

coupled plasmon moves outside the excitation range of the 780 nm laser, and is no longer optically excited thus turning off the generation of hot electrons for polymerization. When the laser is re-tuned to 710 nm to again match the coupled plasmon, a new cycle of growth and blue-shifting starts and saturates when the coupled plasmon shifts to 680 nm. Further irradiation with 690 nm and 633 nm laser light repeats this effect, although smaller blue shifts are now observed. The smaller shifts at later stages likely arise because of the weakened electric field concentration in the enlarged gap spacing, which gives less efficient hot electron generation. This self-limiting resonance shift corresponds to less polymer growth under the NP than around its sides which again implicates hot electron initiation that occurs only close to the Au surface. We suggest that in this restricted geometry within the gap there is a higher probability of radicalradical termination reactions, keeping chains short. Our observations demonstrate that this type of plasmon-resonant optically-controlled growth mechanism allows us to fine-tune the polymer deposition by using different irradiation

ACS Paragon Plus Environment

5

ACS Photonics 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 11

wavelengths. Changing the monomer alters both the polymerization rate as well as the rate at which the plasmon resonance shifts away from the laser via the increasing gap size, creating a unique cycle of feedback that offers selective control of the growth. Thus, we can program the tuning path and allow it to complete at every plasmonic nanostructure. CONCLUSIONS In summary, we have realized light-directed tuning of coupled plasmons by expanding the nanogaps through in-situ polymerization. We characterized this using real-time dark-field microscopy on individual and many nanoparticle constructs. The polymerization process is identified in SEM images and works for both styrenic and acrylic monomers. This method not only can be used to remotely fine-tune the plasmons of NPoM nanostructures in a facile way, but also allows the polymer growth to be controlled and monitored with light in real time. Although not suited for mass production of polymers, this method is extremely versatile for synthesis in nanodevices combining selective local synthesis, fine tuning of sizes (< 10 nm), and monitoring by optical spectroscopy. Its generality for different monomers further confirms such polymerization is due to the injection of hot electrons generated by plasmons. This plasmon mediated process allows lightguided and self-limiting growth of polymers around Au NPs, since the overlap of excitation wavelength with the coupled-plasmon mode determines the efficiency of hot-electron generation, thereby realizing programmable and autonomous tuning of plasmons. Moreover, the mechanism of plasmon-induced polymerization suggested here opens opportunities for developing plasmonic chemistry, examining the details of different polymerizations, as well as for plasmontuning devices for sensing applications.

Figure 4 Laser guided polymer growth using tunable excitation wavelengths. (a) Evolving scattering spectra of Au NPoM in DVB as OPO excitation wavelength is shifted from 780 nm to 633 nm, 10 µW power. (b) Evolution of coupled plasmon wavelength with irradiation time when shifting pump laser wavelength as marked.

METHODS Nano-assembly Gold or silver nanoparticles (AuNPs or AgNPs, 80 nm diameter, obtained from BBI) are drop-cast on thiophenol self-assembled monolayer (SAM) functionalized gold films (100 nm thick, thermally evaporated). Monomers (with inhibitors removed using 10wt% NaOH solution) or ethylbenzene (10 µL) are then drop cast onto the samples, which are subsequently covered with a coverslip to provide a flat upper surface for microscope observation (SI-Scheme S1). The widely-spatially separated nano-constructs produced are formed from individual

ACS Paragon Plus Environment

6

Page 7 of 11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Photonics

nanoparticles spaced by the thin 0.6 nm-thick SAM above the Au mirror. This nanoparticle-onmirror (NPoM) construct forms robust highlyconfined localized plasmons. Laser irradiation A 635 nm linearly polarized laser (Coherent Cube) is coupled to the microscope using a single mode fiber (P3-405BPM-FC-2, Thorlabs), which is then focused down onto the nanoparticles through a 100× objective (Olympus, NA=0.8). The irradiation duration and power is varied to tailor the polymerization conditions. For laserwavelength tuned irradiation, we use an optical parametric oscillator (OPO) pumped by a Ti:Sapphire laser (Spectra Physics MaiTai delivering 200fs pulses, 10 nm linewidth, at 80MHz repetition rate) which drives the OPO (Spectra Physics Inspire), with average output powers of tens of mW. By means of a tunable optical filter, the average power of the laser beam is kept below 30 µW on the sample focal spot. Monitoring Dark-field scattering spectra on individual nanoconstructs are taken confocally through a 50 µmdiameter optical fibre coupled to a spectrometer (QE65000, Ocean Optics) during the irradiation process when the laser is temporarily turned-off for 5s. The irradiated particles are tracked and subsequently characterized with scanning electron microscopy (SEM, LEO 1530VP, Zeiss) after a few nm Pt coating. The etching of Ag is performed by immersing the substrate in ammonia solution (25wt%) for 10 mins at ambient conditions. Simulations Calculation of the gap sizes are performed as follows. Our simulation model consists of an 80 nm AuNP with a bottom facet of width 30 nm separated from a flat gold surface by a continuous spacer of refractive index ng=1.6 and enclosed in a homogeneous medium of refractive index nm=1.55. The facet of the AuNP faces the surface, forming a thin nanocavity which sustains cavity modes as discussed in references.25, 30 In addition to cavity modes, an antenna mode associated with the coupling of the particle to its image in the gold surface is present in the system. The resonance position of this antenna mode is

calculated using a circuit model42 and the system parameters above. Antenna mode and cavity modes couple strongly, resulting in the formation of new hybrid modes. Calculated gap sizes for the NPoM system are obtained by comparing experimental resonances with calculated antennacavity hybrid mode positions.

ASSOCIATED CONTENT Supporting Information. The following file is available free of charge on ACS Publications website at DOI: 10.1021/x. Scheme S1: experimental setup; Scheme S2: Proposed polymerization mechanism; Fig.S1 Raman spectra of PS formed in the nanogap; Fig.S2 Stoke and Anti-stokes Raman; Fig. S3 SEM images of Au NP coated with P3HT. (PDF) AUTHOR INFORMATION Corresponding Author *Emails: [email protected] (TD); [email protected] (OSA); [email protected] (JJB). Author Contributions TD conceived and designed the experiments. TD and JM performed irradiation, spectral measurements and SEM characterizations. TD and AL performed laser-tracked growth. TD, OAS, and JJB discussed and analyzed the data. All the authors contributed to writing of the manuscript. Funding Sources EPSRC grant: EP/G060649/1 and EP/L027151/1; ERC grant: LINASS 320503; Leverhulme Trust: ECF-2016-606. Notes The authors declare no competing financial interest. ACKNOWLEDGMENT This research is supported by UK Engineering and Physical Sciences Research Council grants EP/G060649/1 and EP/L027151/1, and ERC grant LINASS

ACS Paragon Plus Environment

7

ACS Photonics 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

320503. Dr T. Ding is a Leverhulme Early Career Fellow and gratefully acknowledges the support of the Leverhulme Trust (ECF2016-606). REFERENCES (1) Nie, S.; Emory, S. R., Probing Single Molecules and Single Nanoparticles by Surface-Enhanced Raman Scattering. Science 1997, 275, 1102-1106. (2) Mukherjee, S.; Libisch, F.; Large, N.; Neumann, O.; Brown, L. V.; Cheng, J.; Lassiter, J. B.; Carter, E. A.; Nordlander, P.; Halas, N. J., Hot Electrons Do the Impossible: Plasmon-Induced Dissociation of H2 on Au. Nano Lett. 2013, 13, 240-247. (3) Pincella, F.; Isozaki, K.; Miki, K., A Visible Light-Driven Plasmonic Photocatalyst. Light Sci. Appl. 2014, 3, e133. (4) Li, J.; Cushing, S. K.; Zheng, P.; Meng, F.; Chu, D.; Wu, N., Plasmon-Induced Photonic and Energy-Transfer Enhancement of Solar Water Splitting by a Hematite Nanorod Array. Nat. Commun. 2013, 4, 2651. (5) Warren, S. C.; Thimsen, E., Plasmonic Solar Water Splitting. Energy Environ. Sci. 2012, 5, 5133-5146. (6) Ueno, K.; Juodkazis, S.; Shibuya, T.; Yokota, Y.; Mizeikis, V.; Sasaki, K.; Misawa, H., Nanoparticle Plasmon-Assisted TwoPhoton Polymerization Induced by Incoherent Excitation Source. J. Am. Chem. Soc. 2008, 130, 6928-6929. (7) Stamplecoskie, K. G.; Pacioni, N. L.; Larson, D.; Scaiano, J. C., Plasmon-Mediated Photopolymerization Maps Plasmon Fields for Silver Nanoparticles. J. Am. Chem. Soc. 2011, 133, 9160-9163. (8) Zhou, X.; Deeb, C.; Kostcheev, S.; Wiederrecht, G. P.; Adam, P.-M.; Béal, J.; Plain, J.; Gosztola, D. J.; Grand, J.; Félidj, N.; Wang, H.; Vial, A.; Bachelot, R., Selective Functionalization of the Nanogap of a Plasmonic Dimer. ACS Photonics 2015, 2, 121-129. (9) Zhou, X.; Wenger, J.; Viscomi, F. N.; Le Cunff, L.; Béal, J.; Kochtcheev, S.; Yang,

Page 8 of 11

X.; Wiederrecht, G. P.; Colas des Francs, G.; Bisht, A. S.; Jradi, S.; Caputo, R.; Demir, H. V.; Schaller, R. D.; Plain, J.; Vial, A.; Sun, X. W.; Bachelot, R., Two-Color Single Hybrid Plasmonic Nanoemitters with Real Time Switchable Dominant Emission Wavelength. Nano Lett. 2015, 15, 7458-7466. (10) Deeb, C.; Bachelot, R.; Plain, J.; Baudrion, A.-L.; Jradi, S.; Bouhelier, A.; Soppera, O.; Jain, P. K.; Huang, L.; Ecoffet, C.; Balan, L.; Royer, P., Quantitative Analysis of Localized Surface Plasmons Based on Molecular Probing. ACS Nano 2010, 4, 4579-4586. (11) Atwater, H. A.; Polman, A., Plasmonics for Improved Photovoltaic Devices. Nat. Mater. 2010, 9, 205-213. (12) Huang, X.; El-Sayed, M. A., Plasmonic Photo-Thermal Therapy (Pptt). Alexandria J. Med. 2011, 47, 1-9. (13) Clavero, C., Plasmon-Induced HotElectron Generation at Nanoparticle/MetalOxide Interfaces for Photovoltaic and Photocatalytic Devices. Nat. Photon. 2014, 8, 95-103. (14) Brongersma, M. L.; Halas, N. J.; Nordlander, P., Plasmon-Induced Hot Carrier Science and Technology. Nat. Nanotechnol. 2015, 10, 25-34. (15) Jin, R.; Cao, Y.; Mirkin, C. A.; Kelly, K. L.; Schatz, G. C.; Zheng, J. G., Photoinduced Conversion of Silver Nanospheres to Nanoprisms. Science 2001, 294, 1901-1903. (16) Pallares, R. M.; Su, X.; Lim, S. H.; Thanh, N. T. K., Fine-Tuning of Gold Nanorod Dimensions and Plasmonic Properties Using the Hofmeister Effects. J. Mater. Chem. C 2016, 4, 53-61. (17) Genç, A.; Patarroyo, J.; SanchoParramon, J.; Arenal, R.; Duchamp, M.; Gonzalez, E. E.; Henrard, L.; Bastús, N. G.; Dunin-Borkowski, R. E.; Puntes, V. F.; Arbiol, J., Tuning the Plasmonic Response Up: Hollow Cuboid Metal Nanostructures. ACS Photonics 2016, 3, 770-779.

ACS Paragon Plus Environment

8

Page 9 of 11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Photonics

(18) Mock, J. J.; Hill, R. T.; Degiron, A.; Zauscher, S.; Chilkoti, A.; Smith, D. R., Distance-Dependent Plasmon Resonant Coupling between a Gold Nanoparticle and Gold Film. Nano Lett. 2008, 8, 2245-2252. (19) Ding, T.; Herrmann, L. O.; de Nijs, B.; Benz, F.; Baumberg, J. J., Self-Aligned Colloidal Lithography for Controllable and Tuneable Plasmonic Nanogaps. Small 2015, 11, 2139-2143. (20) Ameer, F. S.; Varahagiri, S.; Benza, D. W.; Willett, D. R.; Wen, Y.; Wang, F.; Chumanov, G.; Anker, J. N., Tuning Localized Surface Plasmon Resonance Wavelengths of Silver Nanoparticles by Mechanical Deformation. J. Phys. Chem. C 2016, 120, 20886-20895. (21) Jung, H.; Cha, H.; Lee, D.; Yoon, S., Bridging the Nanogap with Light: Continuous Tuning of Plasmon Coupling between Gold Nanoparticles. ACS Nano 2015, 9, 1229212300. (22) Ding, T.; Mertens, J.; Sigle, D. O.; Baumberg, J. J., Capillary-Force-Assisted Optical Tuning of Coupled Plasmons. Adv. Mater. 2015, 27, 6457-6461. (23) Lumdee, C.; Toroghi, S.; Kik, P. G., Post-Fabrication Voltage Controlled Resonance Tuning of Nanoscale Plasmonic Antennas. ACS Nano 2012, 6, 6301-6307. (24) Mertens, J.; Eiden, A. L.; Sigle, D. O.; Huang, F.; Lombardo, A.; Sun, Z.; Sundaram, R. S.; Colli, A.; Tserkezis, C.; Aizpurua, J.; Milana, S.; Ferrari, A. C.; Baumberg, J. J., Controlling Subnanometer Gaps in Plasmonic Dimers Using Graphene. Nano Lett. 2013, 13, 5033-5038. (25) Sigle, D. O.; Mertens, J.; Herrmann, L. O.; Bowman, R. W.; Ithurria, S.; Dubertret, B.; Shi, Y.; Yang, H. Y.; Tserkezis, C.; Aizpurua, J.; Baumberg, J. J., Monitoring Morphological Changes in 2D Monolayer Semiconductors Using Atom-Thick Plasmonic Nanocavities. ACS Nano 2015, 9, 825-830.

(26) Ding, T.; Sigle, D.; Zhang, L.; Mertens, J.; de Nijs, B.; Baumberg, J., Controllable Tuning Plasmonic Coupling with Nanoscale Oxidation. ACS Nano 2015, 9, 6110-6118. (27) de Nijs, B.; Bowman, R. W.; Herrmann, L. O.; Benz, F.; Barrow, S. J.; Mertens, J.; Sigle, D. O.; Chikkaraddy, R.; Eiden, A.; Ferrari, A.; Scherman, O. A.; Baumberg, J. J., Unfolding the Contents of Sub-nm Plasmonic Gaps Using Normalising Plasmon Resonance Spectroscopy. Faraday. Discuss. 2015, 178, 185-193. (28) Hill, R. T.; Mock, J. J.; Hucknall, A.; Wolter, S. D.; Jokerst, N. M.; Smith, D. R.; Chilkoti, A., Plasmon Ruler with Angstrom Length Resolution. ACS Nano 2012, 6, 92379246. (29) Benz, F.; Tserkezis, C.; Herrmann, L. O.; de Nijs, B.; Sanders, A.; Sigle, D. O.; Pukenas, L.; Evans, S. D.; Aizpurua, J.; Baumberg, J. J., Nanooptics of MolecularShunted Plasmonic Nanojunctions. Nano Lett. 2015, 15, 669-674. (30) Tserkezis, C.; Esteban, R.; Sigle, D. O.; Mertens, J.; Herrmann, L. O.; Baumberg, J. J.; Aizpurua, J., Hybridization of Plasmonic Antenna and Cavity Modes: Extreme Optics of Nanoparticle-on-Mirror Nanogaps. Phys. Rev. A 2015, 92, 053811. (31) Sundararaman, R.; Narang, P.; Jermyn, A. S.; Goddard Iii, W. A.; Atwater, H. A., Theoretical Predictions for Hot-Carrier Generation from Surface Plasmon Decay. Nat. Commun. 2014, 5, 5788. (32) Mertens, J.; Demetriadou, A.; Bowman, R. W.; Benz, F.; Kleemann, M. E.; Tserkezis, C.; Shi, Y.; Yang, H. Y.; Hess, O.; Aizpurua, J.; Baumberg, J. J., Tracking Optical Welding through Groove Modes in Plasmonic Nanocavities. Nano Lett. 2016, 16, 5605-5611. (33) Govorov, A. O.; Richardson, H. H., Generating Heat with Metal Nanoparticles. Nano Today 2007, 2, 30-38.

ACS Paragon Plus Environment

9

ACS Photonics 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(34) Li, J.; Cushing, S. K.; Meng, F.; Senty, T. R.; Bristow, A. D.; Wu, N., PlasmonInduced Resonance Energy Transfer for Solar Energy Conversion. Nat. Photon. 2015, 9, 601-607. (35) Liu, G. L.; Long, Y.-T.; Choi, Y.; Kang, T.; Lee, L. P., Quantized Plasmon Quenching Dips Nanospectroscopy Via Plasmon Resonance Energy Transfer. Nat. Meth. 2007, 4, 1015-1017. (36) Minamimoto, H.; Toda, T.; Futashima, R.; Li, X.; Suzuki, K.; Yasuda, S.; Murakoshi, K., Visualization of Active Sites for PlasmonInduced Electron Transfer Reactions Using Photoelectrochemical Polymerization of Pyrrole. J. Phys. Chem. C 2016, 120, 1605116058. (37) Wu, K.; Chen, J.; McBride, J. R.; Lian, T., Efficient Hot-Electron Transfer by a Plasmon-Induced Interfacial Charge-Transfer Transition. Science 2015, 349, 632-635. (38) Liu, F.; Luber, E. J.; Huck, L. A.; Olsen, B. C.; Buriak, J. M., Nanoscale Plasmonic Stamp Lithography on Silicon. ACS Nano 2015, 9, 2184-2193. (39) Batra, A.; Kladnik, G.; Gorjizadeh, N.; Meisner, J.; Steigerwald, M.; Nuckolls, C.; Quek, S. Y.; Cvetko, D.; Morgante, A.; Venkataraman, L., Trimethyltin-Mediated Covalent Gold–Carbon Bond Formation. J. Am. Chem. Soc. 2014, 136, 12556-12559. (40) Cheng, Z. L.; Skouta, R.; Vazquez, H.; Widawsky, J. R.; Schneebeli, S.; Chen, W.; Hybertsen, M. S.; Breslow, R.; Venkataraman, L., In Situ Formation of Highly Conducting Covalent Au-C Contacts for Single-Molecule Junctions. Nat. Nanotechnol. 2011, 6, 353357. (41) Bünsow, J.; Mänz, M.; Vana, P.; Johannsmann, D., Electrochemically Induced Raft Polymerization of Thermoresponsive Hydrogel Films: Impact on Film Thickness and Surface Morphology. Macromol. Chem. Phys. 2010, 211, 761-767. (42) Benz, F.; de Nijs, B.; Tserkezis, C.; Chikkaraddy, R.; Sigle, D. O.; Pukenas, L.;

Page 10 of 11

Evans, S. D.; Aizpurua, J.; Baumberg, J. J., Generalized Circuit Model for Coupled Plasmonic Systems. Opt. Express 2015, 23, 33255-33269.

ACS Paragon Plus Environment

10

Page 11 of 11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Photonics

ToC

ACS Paragon Plus Environment

11