6940
Inorg. Chem. 2001, 40, 6940-6947
Liquid Ammonia Mediated Metathesis: Synthesis of Binary Metal Chalcogenides and Pnictides G. A. Shaw and I. P. Parkin* Department of Chemistry, Christopher Ingold Laboratories, University College London, 20 Gordon Street, London, U.K., WC1H 0AJ ReceiVed June 18, 2001 Addition of stoichiometric amounts of low valent metal halides to liquid ammonia solutions of disodium chalcogenide (Na2E; E ) S, Se, Te) afforded a range of both crystalline (PbE (E ) S, Se, Te), TlE (E ) S, Se), Tl5Te3, Ag2E (E ) S, Se, Te)) and X-ray amorphous (MS (M ) Ni, Cu, Zn, Cd, Hg), M2E3 (M ) Ga, In; E ) S, Se, Te), HgE (E ) Se, Te), CuE (E ) S, Se, Te), Cu2S) metal chalcogenides in good yield (95%). Reactions between metal halides and sodium pnictides (Na3Pn; Pn ) As, Sb) in liquid ammonia also afforded X-ray amorphous material (M3Pn2, M ) Zn, Cd; MPn, M ) Fe, Co, Ni) in good yield (95%). Isolation of the metal chalcogenides and pnictides was achieved through washing with CS2 and distilled water. All reactions were complete within 36 h. Products were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energydispersive X-ray analysis (EDXA), electron probe analysis, FT-IR spectroscopy, Raman spectroscopy, microanalysis, and band gap measurements. Annealing amorphous material at 250-300 °C for 48 h induced sufficient crystallinity for analysis by X-ray powder diffraction.
Introduction Binary metal chalcogenides function as catalysis, secondary batteries, lubricants, and semiconductors.1 Band gap energies of group 12-16 materials are important for the emission, detection, and modulation of light in the visible and near-UV regions;2 group 13-15 materials are suitable for red to near-IR radiation. Applications include coatings, gratings,3 and a wide range of optical windows.4 Group 13-16 materials fall into two different compound typessM2E3 and ME (M ) Ga, In; E ) S, Se, Te); both materials are direct band gap semiconductors and of interest as photovoltaic and optoelectronic materials. Gallium and indium sesquichalcogenides (M2E3) have a wide band gap, offering an alternative to group 12-16 materials.4 Catalytic activity of transition metal sulfides is well documented; for example, MoS2 is used as a petrochemical catalyst.5 The disulfides of tin, titanium, molybdenum, zirconium, and hafnium all crystallize as two-dimensional lattices exhibiting weak interlayer bonding and find commercial applications as hightemperature lubricants,3 battery cathodes,2,3 and hydrodesulfurization catalysts.6 The sulfides and selenides of zinc and cadmium are used in reflective coatings, as well as in the pigmentation of paints, rubber, and porcelain.3,7 Various established syntheses exist for the preparation of bulk binary chalcogenides. These include reaction of silyl sulfides,8 sol-gel processing,9 electrodeposition from solution,10 decom* To whom correspondence should be addressed. (1) (a) Lewis, K. L.; Savage, J. A.; Marsh, K. J.; Jones, A. P. C. New Optical Materials. Proc. SPIE-Int. Soc. Opt. Eng. 1983, 400, 21. (b) Kilbourne, B. T. A Lanthanide Lanthology- Part 1; Molycorp Inc.: White Plains, NY, 1993. (2) Nicolau, Y. F.; Dupuy, M.; Brunel, M. J. Electrochem. Soc. 1990, 137, 2915. (3) Greenwood, N. N.; Earnshaw, E. A. Chemistry of the Elements; Pergamon Press: Oxford, 1990; pp 1403-6. (4) O’Brien, P.; Ryoˆki, J. J. Mater. Chem. 1995, 5, 1761. (5) Tsigdinos, G. A.; Moh, G. W. Aspects of Molybdenum and Related Chemistry; Springer: New York, 1978; Vol. 76. (6) Hasse, M. A.; Qiu, J.; DePuydt J. M.; Cheng, H. Appl. Phys. Lett. 1991, 59, 1272.
position of precursors,11 and elemental combination reactions at elevated temperature.12 Recent work has focused on the synthesis of nanoparticulate chalcogenides and has used confined environments such as zeolites and micelles to restrict particle size.13 We have shown that traditional elemental combination reactions can be improved by utilizing liquid ammonia as solvent.14 Some elemental metals react with chalcogenide/ ammonia solutions to form crystalline metal chalcogenides at room temperature.15 The reactions often form single-phase materials in common mineral modifications but were, however, restricted to chalcophilic metals such as Zn, Cd, Hg, Ag, Pb, and Sn. Self-propagating elemental combination reactions have also been used to form metal sulfides in a process known as SHS (self-propagating high-temperature synthesis).16 SHS is a process that utilizes highly exothermic reactions to obtain a sustainable combustion wave.17 The reaction becomes self-propagating, thereby greatly reducing processing time and (7) Fielder, I.; Bayard, M. Artists Pigments, A Handbook of their History and Characteristics; Feller, R. L., Ed.; Cambridge University Press: Cambridge, 1986; Vol. 1, p 65. (8) Schleich, D. M.; Martin, M. J. J. Solid State Chem. 1986, 64, 359. (9) Sriram, M. A.; Kumta, P. N. J. Mater. Chem. 1998, 8, 2453. (10) Massacces, S.; Sanchez, S.; Vedel, J. J. Electroanal. Chem. 1996, 412, 95. Bensalem, R.; Schleich, D. M. Mater. Res. Bull. 1988, 23, 857. (11) Nomura, R.; Konishi, K.; Futenma, S.; Matsuda, H. Appl. Organomet. Chem. 1990, 4, 607. (12) Coustal, R. J. Chim. Phys. 1931, 31, 277. Braver, G. Handbook of PreparatiVe Inorganic Chemistry, 2nd ed.; Academic Press: New York, 1965; Vols. 1, 2. (13) (a) Petit, C.; Pileni, M. P. J. Phys. Chem. 1988, 92, 2282. (b) Lianos, P.; Thomas, J. K. Chem Phys. Lett. 1986, 125, 299. (c) Wang, Y.; Herron, N. J. Phys. Chem. 1987, 91, 257. (14) (a) Henshaw, G.; Shaw, G. A.; Hector, A.; Parkin, I. P. Main Group Metal Chem. 1996, 1, 183. (b) Parkin, I. P.; Henshaw, G.; Shaw, G. A. J. Mater. Sci. Lett. 1996, 15, 1741. (c) Omar, B.; Parkin, I. P.; Shaw, G. A. J. Chem. Soc., Dalton Trans. 1997, 9, 1385. (15) (a) Parkin, I. P.; Shaw G. A.; Henshaw, G J. Chem. Soc., Dalton Trans. 1997, 231. (b) Parkin, I. P. Henshaw, G.; Shaw, G. A. J. Chem. Soc., Chem. Commun. 1996, 1095. (16) Merzhanov, A. G. Russ. Chem. Bull. 1997, 1, 8. (17) Crider, J. F. Ceram. Eng. Sci. Proc. 1982, 3 (9-10), 519.
10.1021/ic010648s CCC: $20.00 © 2001 American Chemical Society Published on Web 12/06/2001
Liquid Ammonia Mediated Methathesis
Inorganic Chemistry, Vol. 40, No. 27, 2001 6941
Table 1. XRD Data for Crystalline Binary Transition Metal Chalcogenides Synthesized by Metathetical Reactions in Liquid Ammonia at Room Temperature
reagentsa
products formed from reaction (identified by XRD)b
product color
phases obtained after annealing washed mater
lattice params, Å (( 0.01)
lit.36 lattice params, Å
2AgF + Na2S 2AgF + Na2Se 2AgF + Na2Te 2TlCl + Na2S TlCl + Na2Se 2TlCl + Na2Te PbCl + Na2S PbCl + Na2Se PbCl + Na2Te
Ag2S (acanthite) + NaF Ag2Se (naumannite) + NaF Ag2Te (hessite) + NaF Tl[TlS2] + NaCl Tl[TlSe2] + NaCl Tl5Te3 + NaCl PbS (galena) + NaCl PbSe (clausthalite) + NaCl PbTe (altaite) + NaCl
black black black black black black black black black
Ag2S (acanthite) Ag2S (naumannite) Ag2S (acanthite) Tl[TlS2] Tl[TlSe2] Tl5Te3 PbS (galena) PbSe (clausthalite) PbTe (altaite)
a ) c ) 4.48 a ) 4.33, b ) 7.06, c ) 7.76 a ) 8.07, b ) 4.47, c ) 8.94 a ) 7.79, c ) 6.80 a ) 8.02, c ) 7.00 a ) 8.93, c ) 12.62 a ) c ) 5.93 a ) c ) 6.12 a ) c ) 6.46
a ) c ) 4.46 a ) 4.33, b ) 7.06, c ) 7.76 a ) 8.09, b ) 4.47, c ) 8.96 a ) 7.79, c ) 6.80 a ) 8.02, c ) 7.00 a ) 8.92 (5), c ) 12.61 (5) a ) c ) 5.93 a ) c ) 6.12 a ) c ) 6.46
a Reagents (expressed with molar ratios) stirred in liquid ammonia at room temperature for 36 h. b Phases characterized by X-ray powder diffraction prior to workup of reaction product.
Table 2. XRD Data for Amorphous Binary Transition Metal Chalcogenides Synthesized by Metathetical Reactions in Liquid Ammonia at Room Temperature prewash mater
product color
phases obtained after annealing washed materb
lattice params, Å (( 0.01)
NiCl2 + Na2S ZnCl2 + Na2S CdCl2 + Na2S 2CuBr + Na2S CuCl2 + Na2S
NaCl NaCl NaCl NaBr NaCl
black yellow yellow black black
CuCl2 + Na2Se CuCl2 + Na2Te HgCl2 + Na2S HgCl2 + Na2Se HgCl2 + Na2Te 2GaCl3 + 3Na2S 2GaCl3 + 3Na2Se 2GaCl3 + 3Na2Te 2InCl3 + 3Na2S 2InCl3 + 3Na2Se 2InCl3 + 3Na2Te
NaCl NaCl NaCl NaCl NaCl NaCl NaCl NaCl NaCl NaCl NaCl
black black black black black black black black black black black
NiS (millerite) ZnS (wurzite) CdS (greenockite) Cu2S (chalcocite) + [Cu1.8S, Cu1.9S] CuS (covelite) Cu1.8S (diginite) CuSe (klockmannite) + [CuSe2 (krutaite)] Cu2.72Te2 + Cu4Te3 β-HgS (metacinnebar) HgSe (tiemannite) HgTe (coloradoite) Ga2S3 Ga2Se3 Ga2Te3 In2S3 In2Se3 In2Te3
a ) c ) 3.42 a ) 3.82, c ) 6.25 a ) 4.14, c ) 6.72 a ) 3.96, c ) 6.78 a ) 3.76, c ) 16.21 Mc a ) 3.93, c ) 17.20 Mc a ) c ) 5.85 a ) c ) 6.08 a ) c ) 6.46 a ) 3.68, c ) 6.03 a ) 6.66, c ) 11.65 a ) c ) 5.90 a ) c )10.78 a ) 7.12, c ) 19.37 a ) c ) 18.51
reagentsa
lit. lattice params,36 Å a ) c ) 3.42 a ) 3.82, c ) 6.26 a ) 4.14, c ) 6.72 a ) 3.96, c ) 6.78 a ) 3.76, c ) 16.19 a ) 3.93, c ) 17.22 a ) c ) 5.85 a ) c ) 6.07 a ) c ) 6.45 a ) 3.68, c ) 6.03 a ) 6.66, c ) 11.65 a ) c ) 5.90 a ) c ) 10.78 a ) 7.12, c ) 19.37 a ) c ) 18.49
a Reagents (expressed with molar ratios) stirred in liquid ammonia at room temperature for 36 h. b Phases characterized by X-ray powder diffraction after annealing at 250-300 °C for 48 h. All minor phases (< ca. 10%) represented by square brackets. c M ) matched stick pattern to database standard.
applied energy when compared to conventional sintering.18 However, high reaction rates also result in a lack of control of grain size and density.19 Calculated adiabatic reaction temperatures for such reactions often exceed 1525 °C,20 restricting them to the synthesis of refractory transition metal dichalcogenides: MoS2, NbS2, WSe2, and TaSe2.21 A variant of SHS has been developed by R. Kaner’s group22 and ourseleves23 and is known as solid-state metathesis, SSM.22 This new reaction type has been primarily undertaken in ampules or sealed containers. It involves the reaction of metal halides with alkali metal chalcogenides and pnictides, eq 1. The driving force for the reaction is the co-formation of a salt along with the desired metal chalcogenide.
MCl4 + 2Na2E f ME2 + 4NaCl
(1)
(18) Munir, Z. A.; Anselmi-Tamburini, U. Mater. Sci. Rep. 1989, 3 (78), 277. (19) Rice, R. W.; McDonough, W. J. J. Am. Ceram. Soc. 1985, 68 (5), C122. (20) Novikov, N. P.; Borovinskaya, I. P.; Merzhanov, A. G. Combustion processes in chemical technology and metallurgy; Russ. Acad. Sci.: Chernogolovka, 1975; p 174. (21) (a) Sheppard, L. M. AdV. Mater. Process. 1986, 2, 25-32. (b) Moore, J. J.; Feng, H. J. Prog. Mater. Sci. 1995, 39, 243. (22) Bonneau, P. R.; Shibao, R. K.; Kaner, R. B. Inorg. Chem. 1990, 29, 2511. (23) Parkin, I. P. Chem. Soc. ReV. 1996, 199.
Maximum reaction temperature can be controlled to some extent in SSM by altering the co-formed salt. Solid state metathesis reaction of anhydrous metal chlorides with sodium sulfide yielded a range of transition metal, lanthanide, actinide, and main-group metal chalcogenides.23 Reactions were initiated thermally inside a heated sealed ampule,24 by a heated filament, known as point source initiation,25 by mechanical grinding of low melting point solids,26 or by simple mixing of highly volatile components at room temperature.27 SSM reactions often initiate at relatively low temperatures and are frequently self-propagating. Total heat of formation of the product mixture is frequently in excess of ca. 250 kcal/mol-1 generating temperatures exceeding 1000 °C. The reactions once initiated are extremely rapid (1-5 s)23 and often associated with the emission of clouds of vaporized co-formed salt. Unlike many precursor reactions, these byproduct salts are highly ionic in character and so are easily removed from the markedly less ionic metal sulfide (to