Lotus Seed Resistant Starch Regulates Gut Microbiota and Increases

Sep 27, 2017 - Fujian Provincial Key Laboratory of Quality Science and Processing Technology in Special Starch, Fujian Agriculture and Forestry Univer...
0 downloads 4 Views 2MB Size
Subscriber access provided by AUBURN UNIV AUBURN

Article

Lotus Seed Resistant Starch Regulates Gut Microbiota and Increases SCFAs Production and Mineral Absorption in Mice Hongliang Zeng, Cancan Huang, Shan Lin, Mingjing Zheng, Chuanjie Chen, Baodong Zheng, and Yi Zhang J. Agric. Food Chem., Just Accepted Manuscript • DOI: 10.1021/acs.jafc.7b02860 • Publication Date (Web): 27 Sep 2017 Downloaded from http://pubs.acs.org on September 29, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Journal of Agricultural and Food Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 39

Journal of Agricultural and Food Chemistry

1

Lotus Seed Resistant Starch Regulates Gut Microbiota and

2

Increases SCFAs Production and Mineral Absorption in

3

Mice

4 5 6

Hongliang Zeng,†,‡ Cancan Huang,† Shan Lin,† Mingjing Zheng,† Chuanjie Chen,†

7

Baodong Zheng,*†,‡ and Yi Zhang*†,‡

8 9



College of Food Science, Fujian Agriculture and Forestry University, Fuzhou,

10

Fujian, P. R. China 350002

11



12

Special Starch, Fujian Agriculture and Forestry University, Fuzhou 350002, China

Fujian Provincial Key Laboratory of Quality Science and Processing Technology in

13 14 15 16 17 18 19 20 21 22

1

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

23

ABSTRACT:

24

Lotus seed resistant starch, known as resistant starch type 3 (LRS3), was orally

25

administered to mice to investigate its effects on the gut microbiota, short-chain fatty

26

acids (SCFAs) production, and mineral absorption. The results showed that mice fed

27

LRS3 displayed a lower level of gut bacterial diversity than other groups. The

28

numbers of starch-utilizing and butyrate-producing bacteria, such as Lactobacillus

29

and Bifidobacterium, and Lachnospiraceae, Ruminococcaceae, and Clostridium,

30

respectively, in mice increased after the administration of medium and high doses of

31

LRS3, while those of Rikenellaceae and Porphyromonadaceae decreased.

32

Furthermore, SCFAs and lactic acid in mice feces were affected by LRS3, and

33

lactate was fermented to butyrate by gut microbiota. LRS3 enhanced the intestinal

34

absorption of calcium, magnesium, and iron, and this was dependent on the type and

35

concentration of SCFAs, especially butyrate. Thus, LRS3 promoted the production

36

of SCFAs and mineral absorption by regulating gut microbiota in mice.

37

KEYWORDS: Lotus seed resistant starch, Gut microbiota, Short-chain fatty acids,

38

Mineral absorption

39 40 41 42 43 44

2

ACS Paragon Plus Environment

Page 2 of 39

Page 3 of 39

Journal of Agricultural and Food Chemistry

45

INTRODUCTION

46

Type 3 resistant starch, also known as retrograded or crystalline starch, cannot be

47

digested and absorbed in the small intestine of healthy humans but can be fermented

48

or partially fermented by the gut microbiota in the large intestine, producing

49

short-chain fatty acids (SCFAs), lactic acid and small amounts of gases.

50

content of SCFAs increases in the large intestine and feces of humans eating diets

51

having a high content of resistant starch, and the gut microbiota of the host changes

52

correspondingly. 2 Currently, the identified human intestinal bacteria can be divided

53

into 10 categories, such as Firmicutes, Bacteroidetes, Proteobacteria, Fusobacteria,

54

Cyanobacteria, Verrucomicrobia , Spirochaeates, Actinobacteria, VadinBE97 and

55

Methanobrevibacter smithii. The bacteria belonged to Firmicutes, Bacteroidetes

56

account for more than 87% of the total gut microbiota. 3 The types and quantities of

57

intestinal flora are determined by microbial molecular ecology techniques, including

58

fingerprinting technique, sequencing technology, nucleic acid hybridization and

59

real-time quantitative PCR. SCFAs are the main energy sources of the colonic

60

mucosa, especially the bottom of the colonic mucosa. 4 SCFAs can reduce the pH of

61

the intestinal environment, thus affecting the intestinal flora’s structure, promoting

62

the proliferation of beneficial bacteria and inhibiting the proliferation of pathogens,

63

which promotes human health.

64

as increasing the intestinal absorption of minerals, lowering blood lipid effects and

65

preventing colorectal cancer, mainly through the SCFAs. 6-8

66

5

1

The

Resistant starch regulates the intestinal tract, such

Lotus seeds are the mature seeds from the genus Nelumbo, especially Nelumbo

3

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 4 of 39

67

nucifera, which is an important commercial crop in China. 9 It contains a high level

68

of amylose (~ 40%, w/w), which may contribute to the formation of lotus seed

69

resistant starch type 3 (LRS3).

70

Bifidobacterium.

71

factors, including the surface microstructure, double-helix structure and biological

72

mechanisms. However, these studies focused on the prebiotic effect of LRS3 in vitro.

73

The study of gut microbiota in vivo is more complicated than in vitro.

74

there is limited information on the effects of LRS3 on the in vivo gut microbiota.

12

10,11

LRS3 can stimulate the growth of

The prebiotic effect of LRS3 results from a combination of

13,14

Thus,

75

The objective of this study was to investigate the effect of LRS3 on the gut

76

microbiota in mice and the relationships among the gut bacterial community, SCFAs

77

production and mineral absorption. Amplicons of the V3 variable regions of bacterial

78

16S rDNA were analyzed using denaturing gradient gel electrophoresis (DGGE),

79

cloning and sequencing. The contents of SCFAs and minerals in mice feces were

80

determined

81

spectrophotometry, respectively.

82

MATERIALS AND METHODS

using

gas

chromatography

(GC)

and

atomic

absorption

83

Materials. Formic, acetic, propionic, butyric, isobutyric, and lactic acids were

84

purchased from Aladdin Reagent Co. (Shanghai, China). The standards of calcium

85

(Ca), magnesium (Mg), and iron (Fe) were obtained from Zhongyijia Technology

86

Development Co. (Tianjin, China). The Mo Bio DNA Extraction Kit was purchased

87

from Mo Bio Laboratories Co. (Carlsbad, CA, USA) and the Poly-Gel DNA

88

Extraction Kit was purchased from Omega Bio-Tek Inc. (Norcross, GA, USA). The

4

ACS Paragon Plus Environment

Page 5 of 39

Journal of Agricultural and Food Chemistry

89

40% acrylamide/bis was purchased from Bio-Rad Laboratories, Inc. (Hercules, CA,

90

USA). The other reagents used were of analytical grade and obtained from

91

Sinopharm Group Chemical Reagent Co. (Shanghai, China). High amylose maize

92

starch (HAMS) was purchased from Beststarch Creatmaterial Co., Ltd (Fujian,

93

China). LRS3 was prepared and purified according to our previous methods. 11

94

Animals and experimental design. BALB/c male mice, with weights of 18.0 ±

95

1.0 g (Certification number: 2007000552260), were provided by the Experimental

96

Animal Center, Fujian University of Traditional Chinese Medicine, Fujian Province,

97

China. The animals were housed in stainless steel cages in a room with a controlled

98

temperature (23 ± 1°C), relative humidity (60%–65%), and 12 h light/dark cycle

99

(light on at 8:00 a.m. and off at 8:00 p.m.). All of the animal studies used in this

100

study were performed in compliance with the Guidelines for the Care and Use of

101

Laboratory Animals published by the U.S. National Institutes of Health (NIH

102

Publication 85-23, 1996), and all procedures were approved by the Animal Care

103

Review Committee (Approval NO. 2017019), Fujian University of Traditional

104

Chinese Medicine, China. The basal diet was purchased from Jiangsu Xietong

105

Organism Co. Ltd. (Nanjing, China). The compositions of 5 diets are shown in Table

106

1 and its nutrition components are in accordance with GB 14924.3-2010 standards

107

(China). The energy values were calculated using Mingwei Diet Pagoda

108

Management System (Version 5.0, Fuzhou, China).

109

For one week, all animals were allowed free access to distilled water and were fed

110

the basal diet. Then, the mice were randomly divided into 5 groups of 14 mice each:

5

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

111

1, normal control (NC) group in which mice were given the same volume of distilled

112

water and the basal diet was provided ad libitum; 2, low dose of LRS3 (LD) group in

113

which mice were given the same volume of distilled water and fed a modified basal

114

diet with 5% LRS3; 3, medium dose of LRS3 (MD) group in which mice were given

115

the same volume of distilled water and fed a modified basal diet with 10% LRS3; 4,

116

high dose of LRS3 (HD) group in which mice were given the same volume of

117

distilled water and fed a modified basal diet with 15% LRS3; and 5, HAMS group in

118

which mice were given the same volume of distilled water and fed a modified basal

119

diet with 10% high amylose maize starch. The food intakes and weights of mice

120

were determined every day. The mice feces were collected on a 24-hour period

121

during15 d and weighed, freeze-dried (LG-1.0 vacuum freeze drier, Xinyang,

122

Shenyang, China), and stored at −80°C until further analysis.

123

Extraction of DNA and PCR amplification. For each sample, 1.5 g of mice

124

feces was thawed in ice water, suspended in 30 mL of 0.1 mol/L phosphate-buffered

125

saline (pH 7.0) and stirred well. The supernatant was obtained by centrifuging three

126

times at 200 ×g for 5 min. Then, the supernatant was centrifuged at 10,000 ×g for 5

127

min at room temperature, and the bacterial pellets were collected. The pellets were

128

resuspended in 3 mL of TE buffer (pH 8.0) and then the DNA was extracted using a

129

PowerFecal® DNA Isolation Kit (Mo Bio Laboratories, Inc.) according to the

130

manufacturer’s instructions. The DNA samples extracted from mice feces were

131

amplified using a forward primer with a GC-clamp – GC-338F, (20 µM), sequence

132

(5′−3′),CGCCCGGGGCGCGCCCCGGGGCGGGGCGGGGGCGCGGGGGGCCT

6

ACS Paragon Plus Environment

Page 6 of 39

Page 7 of 39

Journal of Agricultural and Food Chemistry

133

ACGGGAGGCAGCAG – and a reverse primer – 518R, (20 µM), sequence (5′−3′),

134

ATTACCGCGGCTGCTGG – to conserved sequences flanking the variable V3

135

region of the bacterial 16S rDNA in a PTC220 PCR amplification system (Bio-Rad

136

Laboratories, Inc.). Each reaction mixture was prepared with 100 ng of template

137

DNA, 0.5 µL of 20 µM GC-338F, 0.5 µL of 20 µM 518R, 5 µL of PCR buffer, 4 µL

138

of 2.5 mM dNTPs, 0.5 µL of 5 U/µL rTaq, and 50 µL of ddH2O. The amplification

139

program was composed of an initial denaturing step at 94°C for 5 min, followed by

140

30 cycles of denaturing at 94°C for 30 s, annealing at 55°C for 30 s, and extension at

141

72°C for 30 s. A final extension step was performed at 72°C for 10 min. The sizes

142

and amounts of the amplicons were examined on a 2% agarose gel stained with

143

ethidium bromide.

144

Generation of microbiota profiles using DGGE. The DGGE was generated

145

using the DCode Universal Mutation Detection System (Bio-Rad Laboratories, Inc.)

146

as the reported method

147

were

148

(acrylamide/bisacrylamide = 37.5:1, Bio-Rad Laboratories, Inc.) containing a

149

35−55% linear denaturing gradient in 50× TAE buffer (40 mmol/L Tris-acetate, 1

150

mmol/L Na-EDTA, pH 8.0), which contained 0 and 100% denaturant (7 mol/L urea

151

and 40% (v/v) formamide; Amersham Pharmacia Biotech, Amersham, UK). The

152

electrophoresis was performed under a constant voltage of 150 V at 60°C for 16 h.

153

After electrophoresis, the gel was silver-stained as previously described.

154

obtained DGGE patterns were subsequently normalized and analyzed with Bio-Rad

applied

onto

15

with slight modifications. Briefly, 10 µL of PCR products 1

mm

thick

8%

(w/v)

7

ACS Paragon Plus Environment

polyacrylamide

gels

16

The

Journal of Agricultural and Food Chemistry

Page 8 of 39

155

Quantity One 4.3.0 software (Bio-Rad Laboratories, Inc.). The numbers and

156

densities of electrophoresis bands in each sample were quantitatively analyzed to

157

investigate the diversity and to perform a principal component analysis (PCA) of

158

fecal flora. Clustering was accomplished using the Pearson correlation and the

159

unweighted pair group mean average (UPGMA) method. The indices values of the

160

DGGE profiles were compared using the following equations:

161

S

(1)

H ' = - ∑ Pi ln Pi i= 1

H ' H 'm a x

=

H ' ln S

162

EH =

163

where H' is the Shannon–Weiner index, Pi is the ratio of the absorbance of the ith

164

band to the absorbance sum of all the bands, EH is the evenness index, S is the value

165

of richness, which is the number of the bands of each lane in the DGGE profile.

(2)

166

Identification of DGGE DNA bands. The bands of specific interest were excised

167

from the DGGE gel with a sterile razor and placed in a sterile centrifuge tube. Then,

168

50 µL of the sterile water was added, and the mixture was mashed and placed at 4°C

169

for 12 h to obtain the bacterial DNA from the gel. The DNA sample was amplified

170

using

171

CCTACGGGAGGCAGCAG – and a reverse primer – 518R, (20 µM), sequence

172

(5′−3′), ATTACCGCGGCTGCTGG – under the same conditions as described above.

173

The PCR products were obtained from a 1% agarose gel and purified using a

174

Poly-Gel DNA Extraction Kit (OMEGA Engineering, Inc., Norwalk, CT, USA). The

175

cloning and sequencing analysis of DNA samples were carried out according to the

176

methods of Zhou et al. 17 These sequences were submitted to the GenBank database,

a

forward

primer



338F,

(20

µM),

8

ACS Paragon Plus Environment

sequence

(5′−3′),

Page 9 of 39

Journal of Agricultural and Food Chemistry

177

and the homology was compared using the BLAST algorithm-based program. The

178

closest matched sequences were obtained, and the neighbor-joining phylogenetic tree

179

was constructed by MEGA 5.0 software. The reliability of the tree topology was

180

gauged by performing a bootstrap analysis using 1,000 replicates.

181

qPCR analysis of Lactobacillus and Bifidobacterium. The quantifications of

182

Lactobacillus and Bifidobacterium were performed using an MJ OpticonR-2

183

quantitative real-time PCR system (Bio-Rad Laboratories, Inc.). The construction

184

and verification of the standard DNA were carried out according to a previous

185

method.

186

copy number and cycle threshold. Each reaction mixture was prepared with 10 µL of

187

2× SYBR Premix Ex Taq (TaKaRa, Dalian, China), 0.5 µL of 10 µM forward primer,

188

0.5 µL of 10 µM reverse prime, 1 µL of DNA, and 20 µL of ddH2O. The

189

amplification program consisted of pre-incubation at 90°C for 3 min, 40 cycles at

190

90°C for 10 s, 58–63°C for 10 s, and 72°C for 10 s, and finally one cycle for the

191

melting curve analysis. The real-time PCR of Lactobacillus used a forward primer –

192

F-Lacto, sequence (5′−3′), GAGGCAGCAGTAGGGAATCTTC – and a reverse

193

primer – R-Lacto, sequence (5′−3′), GGCCAGTTACTACCTCTATCCTTCTTC.

194

The real-time PCR of Bifidobacterium used a forward primer – F-Bifido, sequence

195

(5′−3′), CGCGTC YGGTGTGAAAG – and a reverse primer – R-Bifido, sequence

196

(5′−3′), CCCCA CATCCAGCATCCA. The number of each strain was expressed as

197

a logarithm of the copy number of the 16S rDNA gene per dry fecal weight.

198

18

The standard curve was constructed from the relationship between the

Determination of SCFAs and lactic acid. SCFAs and lactic acid in mice feces

9

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 10 of 39

19

199

were determined according to a previously reported method

with some

200

modifications. Briefly, the standard solutions of formic, acetic, propionic, butyric,

201

isobutyric, and lactic acids were prepared at concentrations of 5, 10, 15, 20, and 25

202

mmol/L, respectively. The quantitative analysis of SCFAs was performed by GC

203

(Agilent7890, Palo Alto, CA, USA) on a HP-INNOWAX chromatographic column

204

(30 m × 0.320 mm × 0.25 µm; Agilent) at the conditions of 100°C of initial

205

temperature for 0.5 min, then heating to 200°C at 4°C/min. The flow rates of carrier

206

gas, fuel gas and oxidant gas were 20 mL/min of N2, 30 mL/min of H2 and 300

207

mL/min of air, respectively. The signal was detected at 240°C with a FID detector.

208

Then, 0.2 µL of the respective standard solutions was loaded on the GC system. The

209

standard curves of SCFAs and lactic acid were obtained with the concentration as the

210

abscissa (x) and the peak area as the ordinate (Y). The standard curve equations were

211

follows: Y=89.67x+56.62 (Formic acid, R2=0.9961), Y=57.68x+13.40 (Acetic acid,

212

R2=0.9912), Y=150.23x+11.59 (Propionic acid, R2=0.9994), Y=199.26x+7.58

213

(Butyric acid, R2=0.9956), Y=282.52x+12.38 (Isobutyric acid, R2=0.9985), and

214

Y=64.23x+48.41 (Lactic acid, R2=0.9897).

215

Then, 0.5 g of the mice feces was added to a centrifuge tube containing 4 mL of

216

distilled water and mixed thoroughly on a vortex-mixer for 2 min. After mechanical

217

shaking at 4°C for 30 min and centrifugation at 10,000 ×g at 4°C for 20 min)

218

(Biofuge Strato, Thermo Electron Corporation, Waltham, MA, USA), the

219

supernatants were filtered through a 0.45-µm filter. The contents of SCFAs and lactic

220

acid were measured as described above.

10

ACS Paragon Plus Environment

Page 11 of 39

Journal of Agricultural and Food Chemistry

221

Determination of the mineral absorption. Dried samples of 0.5 g of feces or

222

diet (sampling at the late of experimental period) were individually added to 9 mL of

223

HNO3/H2O2 (8:1) in a microwave digestion instrument (XT-9900, Tuoxin Analysis

224

Instrument Technology co., LTD, Shanghai, China), and then, in order, digested at 2

225

Kg/cm−2 pressure with a microwave power of 400 W for 60 s, 5 Kg/cm−2 pressure

226

with a microwave power of 800 W for 60 s, 10 Kg/cm−2 pressure with a microwave

227

power of 800 W for 120 s, 15 Kg/cm−2 pressure with a microwave power of 800 W

228

for 120 s, 20 Kg/cm−2 pressure with a microwave power of 800 W for 180 s, and 25

229

Kg/cm−2 pressure with a microwave power of 800 W for 180 s until discoloration.

230

The digestion solution was dry-ashed in a crucible. The final sample dilution was

231

made in 0.075 mol/L HNO3 to 10 mL and filtered through a 0.45-µm filter. Mineral

232

concentrations were determined by atomic absorption spectrophotometry (AA6300,

233

Shimadzu Co., Kyoto-fu, Japan) in an acetylene-air flame at the following

234

wavelengths: 422.7 nm (Ca), 285.2 nm (Mg) and 248.3 nm (Fe). The mineral’s

235

apparent absorption was calculated as follows:

236

Apparent absorption (%) = (Total intake-Total excretion)/ Total intake ×100

237

Statistical analysis. All of the experiments were conducted in triplicate. The

238

results were expressed as mean ± standard deviations. Data were analyzed by

239

one-way analysis of variance and Duncan’s post-hoc test at a 5% confidence level

240

using SPSS (Version 16.0, Chicago, IL, USA). The matrix of intensity and relative

241

position was subjected to a PCA using SPSS software.

242

RESULTS AND DISCUSSION

11

ACS Paragon Plus Environment

(3)

Journal of Agricultural and Food Chemistry

243

Effects of LRS3 on mouse general health, weight and feed efficiency.

244

Throughout the experiments, all of the animals appeared healthy and lively, with

245

smooth hair and no shedding. The fecal pellets were normal, and there were no

246

treatment-related deaths and diseases. No mice experienced diarrhea or constipation.

247

The growth of mice was normal during the 15-d experimental period. Different body

248

weights of mice were observed among the NC, LD, MD, HD, and HAMS groups

249

(Figure 1). At the beginning of the experiment, the body weights of the mice were

250

18.0 ± 1.0 g. The body weights of mice in each group increased over time, and the

251

gain rate of mice in the NC group was the greatest among these groups (p