Novel Synthesis of Acyloxyferrole Complexes from Alkynes and Their

Cite this:Organometallics 2004, 23, 3, 619-621 ... For a more comprehensive list of citations to this article, users are encouraged to perform a searc...
5 downloads 0 Views 62KB Size
Organometallics 2004, 23, 619-621

619

Novel Synthesis of Acyloxyferrole Complexes from Alkynes and Their Conversion to Cyclobutenediones Mariappan Periasamy,* Amere Mukkanti, and D. Shyam Raj School of Chemistry, University of Hyderabad, Central University P.O., Hyderabad-500 046, India Received August 28, 2003 Summary: Acyloxyferrole complexes are easily prepared by the reaction of alkynes and Fe3(CO)12/Et3N in THF, which upon reaction with Br2 in dichloromethane at -78 °C give the corresponding cyclobutenediones in 60-90% yields. The acyloxyferrole complex prepared using diphenylacetylene and acetyl chloride was characterized by single-crystal X-ray analysis.

Scheme 1

Inroduction Since the early reports on the reaction of iron carbonyls with alkynes,1 organometallic complexes of different structural types derived from alkynes have been prepared.2,3 Among these complexes the hydroxyferrole complexes have good synthetic potential. The simple ferrole complex using acetylene can be readily prepared by the reactions with iron carbonyls in water.4 Such ferrole complexes were also prepared exploiting the reaction of alkynes with an aqueous alkaline solution of Fe(CO)55a and by refluxing a mixture of alkynes and Fe3(CO)12 in hydrocarbon solvents.5b However, the yields reported in the above methods are around 5% and never more than 18% even after 3 weeks of reaction. Hence, such ferrole complexes are not well exploited in organic synthesis due to the lack of a practically viable method to prepare them in good amounts. In continuation of studies on the development of metal cabonyl reagents for synthetic applications,6 we wish to report here that the Et3N-promoted reaction of Fe3(CO)12 with alkynes and acid chlorides gives the corresponding acyloxyferrole complexes (65-76% yields), which upon further reaction with Br2 in dichloromethane at -78 °C produce the corresponding cyclobutenediones. * Corresponding author. E-mail: [email protected]. (1) Wender, I.; Friedel, R. A.; Markby, R.; Sternberg, H. W. J. Am. Chem. Soc. 1955, 77, 4946. (2) (a) Hubel, W. In Organic Synthesis via Metal Carbonyls; Wender, I., Pino, P., Eds.; Wiley-Interscience: New York, 1968; Vol. 1, p 273, and references therein. (b) Fehlhammer, W. R.; Stolzenberg, H. In Comprehensive Organometallic Chemistry; Wilkinson, G., Stone, F. G. A., Abel, E. W., Eds.; Pergamon Press: Oxford, 1983; Vol. 4, p 545. (c) Sternberg, H. W.; Markby, R.; Wender, I. J. Am. Chem. Soc. 1958, 80, 1009. (d) Clarkson, V R.; Jones, E. R.; Wailes, P. C.; Whiting, M. C. J. Am. Chem. Soc. 1956, 78, 6206. (3) (a) Pearson, A. J.; Shively, R. J., Jr.; Dubbert, R. A. Organometallics 1992, 11, 4096. (b) Pearson, A. J.; Shively, R. J., Jr. Organometallics 1994, 13, 578. (c) Pearson, A. J.; Perosa, A. Organometallics 1995, 14, 5178. (4) Hock, A. A.; Mills, O. S. Acta Crystallogr. 1961, 14, 139. (5) (a) Sternberg, H. W.; Friedel, R. A.; Markby, R.; Wender, I. J. Am. Chem. Soc. 1956, 78, 3621. (b) Aime, S.; Milone, L.; Sappa, E.; Tiripicchio, A.; Lanfredi, A. M. M. J. Chem. Soc., Dalton Trans. 1979, 1664. (6) (a) Periasamy, M.; Radhakrihnan, U.; Brunet, J. J.; Chauvin, R.; Elzaizi, A. Chem. Commun. 1996, 1499. (b) Rajesh, T.; Periasamy, M. Organometallics 1999, 18, 5709.

Scheme 2

Results and Discussion We have observed that the addition of Et3N and CH3COCl to the iron carbonyl formed using Fe3(CO)12, Et3N, and alkyne in THF gives the corresponding acyloxy ferrole complexes (Scheme 1). This transformation was found to be general for various alkynes and acid chlorides (Table 1).

The effect of other trialkylamines on the conversion of diphenylacetylene to the corresponding acyloxyferrole complex was examined. The ferrole complexes were obtained in 35% and 50% yields, respectively, using Bu3N and pyridine (entries 2 and 3). The structural assignment of the hydroxyferrole complex 1a was confirmed by single-crystal X-ray analysis (Figure 1). It contains the semibridged carbonyl group between Fe(1)-Fe(2), which was considered as a stabilizing factor.7 (7) (a) Cotton, F. A.; Troup, J. M. J. Am. Chem. Soc. 1974, 96, 1233. (b) Casarin, M.; Ajo, D.; Granozzi, G.; Tondello, E.; Aime, S. Inorg. Chem. 1985, 24, 1241.

10.1021/om0341395 CCC: $27.50 © 2004 American Chemical Society Publication on Web 12/25/2003

620

Organometallics, Vol. 23, No. 3, 2004

Notes

Table 1. Reaction of Alkynes with Fe3(CO)12/R3N in the Presence of R′′COCl/R3Na entry

R

R′

R′′

amine

complex

yield (%)

1 2 3 4 5 6 7 8 9

C6H5 C6H5 C6H5 C6H5 C6H5 C5H11 C5H11 C6H13 C10H21

C6H5 C6H5 C6H5 C6H5 H H H H H

CH3 CH3 CH3 p-NO2C6H4 CH3 C6H5 p-NO2C6H4 C6H5 C6H5

Et3N Bu3N Py Et3N Et3N Et3N Et3N Et3N Et3N

1a 1a 1a 1b 1c 1d 1e 1f 1g

76 35 50 68 72 70 72 65 68

a Products were identified by spectral data (IR, 1H, 13C NMR, and single-crystal X-ray analysis for 1a). Yields are of the isolated products and based on the amount of alkynes used.

Table 2. Formation of Cyclobutenediones upon Br2 Oxidationa acyloxyferrole complex 1 entry

R

R′

R′′

dione

yield (%)

1 2 3 4 5

C6H5 C6H5 C5H11 C6H13 C10H21

C6H5 H H H H

CH3 CH3 p-NO2C6H4 C6H5 C6H5

4a 4b 4c 4d 4e

90 62 60 65 63

a Products were identified by spectral data (IR, 1H, 13C NMR, and comparison with reported data10). Yields are of the isolated products and based on the amount of ferrole complexes 1 used.

The use of I2 at 25 °C in the place of Br2 for the oxidation of complex 1a gave the corresponding cyclobutenedione in low yield (15%) besides a mixture of unidentified iron carbonyl complexes. In the case of the benzoyl derivative of 1 (R′′ ) Ph), benzoic acid (65%) was isolated besides the cyclobutenedione 4a in the reaction with bromine. Previously, bromine and iodine have been used in the oxidative decomplexation of organometallic complexes.8 Further, the enolic complexes of the type 5 were reported9a to give the corresponding cyclobutenedione upon oxidative decomplexation using FeCl3. Also, the maleoyl complexes of nickel 6 were readily decomplexed to obtain the corresponding cyclobutenediones using maleic anhydride.9b Moreover, some Fe, Rh, and Co complexes were reported to react with benzocyclobutenedione to give phthaloyl complexes of the type 6 and 7.9c Figure 1. ORTEP diagram of acyloxyferrole complex 1a.

The transformation of alkynes to the complexes 1 can be explained by a tentative mechanism outlined in Scheme 1. Initial decomposition of the Fe3(CO)12 in the presence of R3N would give a coordinatively unsaturated reactive species.10c These species may further split into other coordinatively unsaturated species before reaction with alkynes. The resulting species would then react with the alkyne and CO to give the maleoyl iron complexes 2 and 3, which could undergo acylation in the presence of R′′COCl. We have observed that the ferrole complexes 1 are relatively stable under nitrogen but decompose upon exposure to air. Whereas the ferrole 1a in alcoholic solvents gave unclean reaction on ceric ammonium nitrate oxidation, it remained unaffected by CuCl2 in acetone solvent at 25 °C. Interestingly, the reaction of 1 with Br2 in dichloromethane at -78 °C produced the corresponding cyclobutenediones in moderate to good yields (Table 2). (8) (a) Ingham, W. L.; Coville, N. J. Inorg. Chem. 1992, 31, 4084. (b) Liebeskind, L. S.; Welker, M. E.; Fengl, R. W. J. Am. Chem. Soc. 1986, 108, 6328. (c) Beckett, R. P.; Davies, S. G. Chem. Commun. 1988, 160. (9) (a) Wilkinson, G., Stone, F. G. A., Abel, E. W., Eds. Comprehensive Organometallic Chemistry; Pergamon Press: Oxford, 1982; Vol. 4, p 554. (b) Hoberg, H.; Herrera, A. Angew. Chem., Int. Ed. Engl. 1980, 29, 927. (c) Liebeskind, L. S.; Baysdon, S. L.; South, M. S.; Iyer, S.; Leeds, J. P.; Tetrahedron 1985, 41, 5839. (10) (a) Liebeskind, L. S.; Baysdon, S. L. Tetrahedron Lett. 1984, 25, 1747. (b) Parker, M. S. A.; Rizzo, C. J. Synth. Commun. 1995, 25, 2781. (c) Periasamy, M.; Rameshkumar, C.; Radhakrihnan, U.; Brunet, J. J. J. Org. Chem. 1998, 63, 4930. (d) Rameshkumar, C.; Periasamy, M. Organometallics 2000, 19, 2400.

Accordingly, it is reasonable to assume that the decomplexation of the acyl complexes 1 by bromine to the corresponding cyclobutenediones may go through intermediates similar to 5 and 7. However, we do not have evidence in support of such intermediates in this transformation. In conclusion, although the mechanism and the intermediates involved in the transformations reported here are not clearly understood, the simple and convenient methods for the conversion of alkynes to the acyloxy ferrole complexes and cyclobutenediones have good synthetic potential. Since certain cyclobutenedione derivatives have potential for applications as NLO materials, growth regulators, herbicides, and antitumor agents11 and as versatile starting materials for the synthesis of several functionalzed carbocycles,12 easy accessibility of these derivatives via the methods described here should facilitate further exploitation of such iron carbonyl complexes in organic synthesis. (11) (a) Cole, R. J.; Kirksey, I. W.; Cutler, H. G.; Doupkin, B. L.; Peckhan, J. C. Science 1973, 179. (b) K. Y.; Bailey, F. C. J. Org. Chem. 1992, 52, 3278. (12) (a) Zhang, S.; Liebeskind, L. S. J. Org. Chem. 1999, 64, 4042. (b) Mingo, P.; Zhang, S.; Liebeskind, L. S. J. Org. Chem. 1999, 64, 2145. (c) Wipf, P.; Hopkins, C. R. J. Org. Chem. 1999, 64, 6881. (d) Tiedemann, R.; Turnbull, P.; Moore, H. W. J. Org. Chem. 1999, 64, 4030.

Notes

Organometallics, Vol. 23, No. 3, 2004 621

Experimental Section General Procedures. The X-ray diffraction measurements were carried out at 293 K on an automated Enraf-Nonious MACH 3 diffractometer using graphite-monochromated Mo KR (λ ) 0.71073 cm-1) radiation. Intensity data were collected by the ω-scan mode. The data were reduced using the XTAL program. No absorption correction was applied. The refinement for structure 1a was made by full matrix least squares on F2 (SHELX 97). 1H NMR (200 MHz) and 13C NMR (50 MHz) spectra were recorded in CDCl3, and TMS was used as reference (δ ) 0 ppm). Melting points are uncorrected. IR spectra were recorded on a JASCO FT-5300 instrument with polystyrene as reference. Mass spectral analyses were carried out on a VG 7070H mass spectrometer using EI techniques at 70 eV. Fe3(CO)12 was prepared following a reported procedure using Fe(CO)5 supplied by Fluka.13 THF was distilled over sodium-benzophenone ketyl. Dichloromethane (DCM) was distilled over calcium hydride and stored over molecular sieves. Chromatographic purification was conducted by column chromatography using 100-200 mesh silica gel obtained from Acme Synthetic Chemicals, India. All reactions and manipulations were carried out under nitrogen atmosphere. All the yields reported are isolated yields of materials, judged homogeneous by TLC analysis. Preparation of Acyloxyferrole Complexes 1. A mixture of Fe3(CO)12 (4 mmol) and Et3N (10 mmol) in THF (40 mL) was stirred for 5 min under dry nitrogen at 25 °C. Diphenylacetylene (3 mmol) was added and stirred for 30 min. Then Et3N (10 mmol) and CH3COCl (15 mmol) were added, and the contents were further stirred at the same temperature for 12 h. Ether (100 mL) was added, and the reaction mixture was washed successively with H2O (40 mL) and brine (2 × 50 mL), dried over Na2SO4, and concentrated under reduced pressure. The residue was subjected to column chromatography (silica gel, hexane-EtOAc). Ethyl acetate (1%) in hexane eluted the ferrole complex 1a. Crystals suitable for single-crystal X-ray analysis were grown as follows: Complex 1a (100 mg) was dissolved in a minimum amount of hot methanol (4 mL) and allowed to cool to room temperature under N2 atmosphere. 1a: Yield: 76% (1.369 g); mp 152-155 °C (dec). IR (KBr): ν (cm-1) 2083, 2042, 2005, 1956, 1749. 1H NMR: δ 1.9 (s, 6 H), 7.18-7.25 (m, 10 H). 13C NMR: δ 211.8, 207.7, 205.3, 185.5, 168.4, 130.7, 130.5, 128.5, 127.9, 125.6, 20.6. 1b: Yield: 68% (1.662 g); mp 158-160 °C (dec). IR (KBr): ν (cm-1) 2081, 2044, 2027, 1988, 1726. 1H NMR: δ 9.9-10 (d, J ) 8.6 Hz, 4H), 9.6-9.7 (d, J ) 8.6 Hz, 4H), 8.8-9.0 (m, 10H). 13 C NMR: δ 211.3, 208.4, 204.9, 184.7, 162.7, 150.8, 134.2, 131.5, 130.6, 130, 128.9, 128.1, 125.9, 123.7. 1c: Yield: 72% (1.132 g); mp 150-152 °C (dec). IR (neat): ν (cm-1) 2083, 2007, 1953, 1759. 1H NMR: δ 7.3 (m, 5H), 6.1 (s, 1H), 2.1(s, 3H), 2.0 (s, 3H). 13C NMR: δ 210.6, 208.2, 206.1, 190.7, 188.1, 168.1, 168, 131.2, 129.3, 129.0, 128.6, 118.7, 99.7, 21.0, 20.8. 1d: Yield: 70% 1.348 g). IR (neat): ν (cm-1) 2081, 2040, 2000, 1957, 1732. 1H NMR: δ 7.5-8.0 (m, 10H), 6.1 (s, 1H), 0.7-2.5 (m, 11H). 13C NMR: δ 211.3, 208.4, 205.6, 191.5, 186.5, 164.1, 133.6, 129.8, 129.1, 128.6, 122.0, 99.4, 31.6, 29.2, 27.1, 22.2, 13.7. (13) King, R. B.; Stone, F. G. A. Inorg. Synth. 1963, 7, 193.

1e: Yield: 72% (1.582 g); mp 122-125 °C (dec). IR (neat): ν (cm-1) 2091, 2040, 1994, 1965, 1730. 1H NMR: δ 8.1-8.5 (m, 8H), 6.15 (s, 1H), 0.8-2.8 (m, 11H). 13C NMR: δ 210.6, 207.8, 205.5, 190.6, 185.4, 162.4, 151.0, 134.2, 130.9, 123.8, 121.8, 99.2, 31.5, 29.1, 27.1, 22.1, 13.7. 1f: Yield: 65% (1.279 g). IR (neat): ν (cm-1) 2081, 2040, 2003, 1957, 1732. 1H NMR: δ 8.1-8.4 (m, 4H), 7.4-7.7(mm, 6H), 6.1 (s, 1H), 0.8-2.5 (m, 13H). 13C NMR: δ 211.4, 208.5, 205.7, 191.7, 186.5, 164.2, 134.4, 133.7, 130.5, 129.9, 129.8, 129.1, 128.8, 128.7, 122.0, 99.5, 31.3, 29.6, 29.1, 27.2, 22.4, 13.8. 1g: Yield: 68% (1.453 g). IR (neat): ν (cm-1) 2081, 2040, 2005, 1957, 1732. 1H NMR: δ 8.0-8.2, (m, 4H), 7.4-7.7 (m, 6H), 6.1 (s, 1H), 0.8-2.2 (m, 21H). 13C NMR: δ 211.3, 208.4, 205.6, 191.6, 186.5, 164.1, 133.6, 129.8, 129.1, 128.6, 122.0, 99.4, 31.8, 29.6, 29.5, 29.4, 29.3, 29.2, 29.1, 27.2, 22.6, 14.0. Preparation of Cyclobutenedione. To a solution of ferrole complex 1a (1 mmol) in dichloromethane (10 mL) was added Br2 (3 mmol) at -78 °C under nitrogen atmosphere, and the reaction mixture was stirred at the same temperature for 1 h. The contents were brought to 25 °C, and the excess bromine was destroyed using aqueous NaHSO3. DCM (100 mL) was added, and the combined organic mixture was washed with H2O (40 mL) and brine (2 × 50 mL), dried over Na2SO4, and concentrated. The residue was subjected to column chromatography (silica gel, hexane-EtOAc). Ethyl acetate (1.5%) in hexane eluted the 3,4-diphenylcyclcobutene-1,2-dione 4a. 4a: Yield: 90% (0.212 g); mp 95-96 °C (lit.10 mp 97 °C). IR (KBr): ν (cm-1) 1780. 1H NMR: δ 7.45-7.68 (m, 6 H), 8.14 (m, 4 H). 13C NMR: δ 196.1, 187.4, 134.6, 131.2, 129.7, 128.7. MS (EI): 235 (M+, 12%), 179 [(M+1) - (Ph2C2+1), 100%]. 4b: Yield: 62% (0.099 g); mp 152-153 °C (lit.10 mp 152153 °C). IR (KBr): ν (cm-1) 1768. 1H NMR: δ 9.5 (s, 1H), 7.38.0 (m, 5H). 13C NMR: δ 197.7, 196.0, 195.5, 178.3, 134.6, 129.5, 129.4, 128.6. 4c: Yield: 60% (0.091 g). IR (neat): ν (cm-1) 1778. 1H NMR: δ 9.20 (s, 1H) 2.81 (t, J ) 7.3 Hz, 2H) 1.70-1.83 (m, 2H) 1.27-1.40 (m, 4H), 0.82 (t, J ) 7.3 Hz, 3H). 13C NMR: δ 208.3, 199.9, 196.6, 184.8, 31.2, 27.1, 25.6, 22.1, 13.7. MS (EI): m/z 152 (M+, 13%), 81 [M+ - C5H11, 20%]. 4d: Yield: 65% (0.108 g). IR (neat): ν (cm-1) 1786. 1H NMR: δ 9.1 (s, 1H), 2.81 (t, J ) 7.2 Hz, 2H), 2.7-1.2 (m, 8H), 0.89 (t, J ) 7.3 Hz, 3H). 13C NMR: δ 208.3, 199.9, 196.7, 184.9, 31.8, 29.6, 28.9, 26.8, 25.9, 13.9. 4e: Yield: 63% (0.139 g). IR (neat): ν (cm-1) 1774. 1H NMR: δ 9.21 (s, 1H), 2.75 (t, J ) 7.4 Hz, 2H), 2.42-1.23 (m, 16H), 0.81 (t, J ) 7.2 Hz, 3H). 13C NMR: δ 203.4, 199.4, 199.1, 198.7, 31.9, 31.8, 29.6, 29.5, 29.2, 29.1, 26.3, 25.9, 22.6, 13.9. MS (EI): m/z 222 (M+, 25%), 81 [M+ - C10H21, 60%].

Acknowledgment. We are thankful to the CSIR (New Delhi) for financial support. Support of the UGC under the “University of Potential for Excellence” program is gratefully acknowledged. Supporting Information Available: 13C NMR spectra of the compounds 1a-1g and 4a-4e, and crystal data and structure refinement details for 1a and CIF. This material is available free of charge via the Internet at http://pubs.acs.org. OM0341395