Overexpression of Escherichia coli Phytase in Pichia pastoris and Its

Jun 5, 2013 - (5) The phytase from E. coli belongs to the 6-phytase type. .... pH 1.0, 2.0, 3.0, and 4.0; 100 mM sodium acetate buffer, pH 5.0 and 6.0...
1 downloads 0 Views 890KB Size
Subscriber access provided by Brown University Library

Article

Over-expression of E. coli Phytase in Pichia pastoris and Its Biochemical Properties Hsueh-Ming Tai, Li-Jung Yin, Wei-Chuan Chen, and Shann-Tzong Jiang J. Agric. Food Chem., Just Accepted Manuscript • DOI: 10.1021/jf401853b • Publication Date (Web): 05 Jun 2013 Downloaded from http://pubs.acs.org on June 15, 2013

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Journal of Agricultural and Food Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 44

Journal of Agricultural and Food Chemistry

Over-expression of E. coli Phytase in Pichia pastoris and Its Biochemical

1

Properties

2

Hsueh-Ming Tai1,2, Li-Jung Yin3, Wei-Chuan Chen4 and Shann-Tzong Jiang 1,4

3 4 5 6 7 8

1

9

3

10 11

4

12 13 14

Keelung 20224, Taiwan * To whom correspondence should be addressed. Tel: +886-4-26328001 Ext. 15375; Fax: +886-943207241; E-Mail: [email protected]

Department of Food and Nutrition, Providence University, No. 200, Sec. 7, Taiwan Boulevard, Salu, Taichung 43301, Taiwan 2 Nugen Bioscience (Taiwan) Co, Ltd., No. 29, 40th Rd., Taichung Industry Park, Taichung, Taiwan. Department of Seafood Science, National Kaohsiung Marine University, No.142 Hai-Chuan Rd. Nan-Tzu, Kaohsiung 81143, Taiwan Department of Food Science, National Taiwan Ocean University, No.2 Beining Rd.,

15 16

17

Running title: Over-expression of E. coli phytase in Pichia pastoris

18

1

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 2 of 44

Abstract

19 20

To obtain Pichia pastoris mutant with E. coli phytase gene, which was

21

synthesized according to P. pastoris codon preference, a mature phytase cDNA of E.

22

coli being altered according to the codons usage preference of Pichia pastoris was

23

artificially synthesized and cloned into expression vector of pGAPZαC. The final

24

extracellular phytase activity was 112.5 U/mL after 72 h cultivation. The phytase,

25

with a molecular mass of 46 kDa, was purified to electrophoretical homogeneity after

26

Ni Sepharose 6 Fast Flow chromatography. The yield, purification fold, and specific

27

activity were 63.97%, 26.17 and 1.57 kU/mg, respectively. It had an optimal pH and

28

temperature of 4.0-6.0 and 50 oC, respectively, and was stable at pH 3.0-8.0 and 25-40

29

o

30

Cu2+, Zn2+, Hg2+, Fe2+, Fe3+, phenylmethyl sulfonylfluoride (PMSF) and

31

N-tosyl-L-lysine chloromethyl ketone (TLCK), but activated by Mg2+, Ca2+, Sr2+,

32

Ba2+,

33

N-ethylmaleimide (NEM). It revealed higher affinity to calcium phytate than to other

34

phosphate conjugates.

35

Keywords: phytase, E. coli, Pichia pastoris, cloning, expression.

C. The purified recombinant phytase was resistant to trypsin and highly inhibited by

glutathione

(GSH),

ethylene

diamine

tetraacetic

36 37

2

ACS Paragon Plus Environment

acid

(EDTA)

and

Page 3 of 44

Journal of Agricultural and Food Chemistry

38 Introduction

39 40

Phytic acid, a major component of plant seeds, is about 1-3% in many cereals

41

and oilseeds and amounts to 60-90% of total phosphorus.1 Although phytates are very

42

important in many physiological functions, especially in seed germination, they are

43

considered solely as anti-nutrients due to the binding with starch and protein and their

44

strong chelating ability with divalent minerals such as Ca2+, Mg2+, Zn2+ and Fe2+.2

45

Conversely, as a strong chelator of iron and zinc, phytate in plant foods actually can

46

serve as an antioxidant to reduce free radical formation mediated by these metals.2

47

The formation of insoluble mineral-phytate complexes at physiological pHs is

48

considered to be the major reason for poor mineral bioavailability, since these

49

complexes are hardly absorbed in human gastrointestinal tract.3 Since many minerals

50

are involved in the activation of intra- and extracellular enzymes, a deficiency of any

51

one of these essential minerals might result in severe metabolic disorders and

52

compromise the health of the organism. Some minerals deficiencies are common in

53

developing countries, but mineral sub-deficiencies are also found in developed

54

countries.4

55 56

Effective reduction of phytic acid can be obtained via the action of both enzymatic and nonenzymatic degradation.3

Enzymatic degradation can be done by

3

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 4 of 44

57

the addition of either isolated form of wild type or recombinant exogenous phytic acid

58

degrading enzymes from various sources of fungi and bacteria. Phytase can reduce the

59

anti-nutritional factor of phytic acid and also eutrophication, caused by the excretion

60

of undigested phytic acid by monogastrics due to the lack of adequate levels of

61

phytase in their digestive tracts.3 Phytases from several plants and microbial species

62

have been purified and characterized.5

63

are from the secretion by gastrointestinal tract, production by microorganisms inside

64

tracts, and from foods or feeds with the addition of microbial phytases.

65

microbial phytases are usually sensitive to pH and heat, which consequently greatly

66

lowered their activities during processing or passing through the gastrointestinal

67

tracts.6

Most of phytases in animal digestive tracts

However,

68

Nonenzymatic hydrolysis during food processing or by physical removal of

69

phytate-rich parts from plants seed are also frequently employed to reduce the phytate

70

levels in the final foods. Phytases (myo-inositol hexakisphosphate 3- or

71

6-phosphohydrolases; EC 3.1.3.8 or EC 3.1.3.26) are phosphatases that can catalyze

72

the sequential hydrolysis of myo-inositol--hexakisphosphate or phytic acid (InsP6) to

73

lower the formation of phosphorylated myo-inositol derivatives and inorganic

74

phosphate.5 Biotechnological engineering to optimize phytases catalytic features is

75

considered as a promising strategy to efficient reduction of phytate. Enhancement of

4

ACS Paragon Plus Environment

Page 5 of 44

Journal of Agricultural and Food Chemistry

76

thermal tolerance and increase in specific activity are two important issues not only

77

for animal feed, but also for food processing applications of phytases. Various

78

strategies have been used to obtain the phytases with higher thermal stability such as

79

shifting in temperature optimum of the Escherichia coli phytase from 55 °C to 65 °C

80

achieved by expression in Pichia pastoris after introducing 3 glycosylation sites into

81

the amino acid sequence by site-directed mutagenesis.7

82

Nevertheless, there are still limited sources of phytase that is suitable for all food

83

applications. Thus, screening for ideal phytase producing bacteria with more

84

favorable properties and biotechnological engineering to optimize phytase’s catalytic

85

and stability features are still attracting researchers. Some of the criteria of ideal

86

phytase is capable of remain highly active during food processing or preparation.

87

Moreover, it is a favorable property of phytase to have high phytate-degrading

88

capability even at room temperature, withstanding of acceptable temperatures such as

89

in digestive tract of animals or human and a high activity over a broad pH range.3

90

Monogastric animals such as pig and poultry, fish and also humans lack phytase

91

to hydrolyze phytate.8 Supplemental dietary phytase is needed for them to utilize

92

phosphorus and other minerals bound in phytates. Although currently phytases are

93

used mainly as animal feed additives in diets of monogastric animals, there is a great

94

potential for using in the processing and manufacturing of food for human

5

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 6 of 44

95

consumption.9 Phytases used in animal feed can reduce/avoid the supplementation of

96

inorganic phosphate,8 which consequently lead to lower the feed costs as well as the

97

pollution caused by fecal phosphorous excretion of animals.10

98

Phytases activity, thermal stability, pH stability, degradation of different phytate

99

forms and production yields need to be improved to make these phytases possible for

100

industrial application.8 However, there is no phytase that can fulfill all of the

101

mentioned requirements.8 Site-directed mutagenesis has been used to improve the

102

specific activity or thermal stability of phytases from Aspergillus fumigatus

103

coli,7 and to change the pH profile of Aspergillus niger phytase.12 Fungal and E. coli

104

phytases are acidic histidine phytases, which can degrade phytate at low pH in

105

stomach where phytate exists in metal free form and results in myo-inositol

106

monophosphate.13 It has been reported that the E. coli phytase was more resistant to

107

pepsin activity than fungal phytases.14 Two types of phytases are known as 3-phytase

108

(EC 3.1.3.8) and 6-phytase (EC 3.1.3.26).5 The phytase from E. coli belongs to

109

6-phytase type.15 Augspurger et al. 8 reported that a bacterial phytase derived from E.

110

coli liberated more P in broilers than two recombinant fungal phytases, based on

111

increases in tibia ash relative to inorganic P supplementation.

11

and E.

112

Chen et al.16 modified appropriately the medium composition and fermentation

113

strategy of Escherichia coli phytase gene appA expressed in P. pastoris KM71-61

6

ACS Paragon Plus Environment

Page 7 of 44

Journal of Agricultural and Food Chemistry

114

strain to enhance phytase activity level from 118 to 204 U/ml at the flask scale.

115

This study was to obtain Pichia pastoris mutant with E. coli phytase gene, which

116

was synthesized without altering the amino acid sequence according to P. pastoris

117

codon preference. It was over-expressed and the biochemical properties of the

118

purified recombinant E. coli phytase were determined.

119 120

Materials and Methods Microorganisms and plasmids

121

Escherichia coli BL21 (DE3) (Stratagene, La Jolla, Calif., USA) was used as the

122

donor of DNA. Escherichia coli TOP10F′ (Invitrogen, Carlsbad, Calif., USA) was

123

used for the construction of E. coli genomic library and for DNA manipulations. The

124

plasmid pUC57 cloning vector (GenScript, Piscataway, New Jersey, USA) was used

125

for DNA fragment cloning. The DNA encoding phytase with His-tag were ligated into

126

pGAPZαC (Invitrogen) expression vector. Pichia pastoris SMD1168H (Invitrogen)

127

were used for expression host of phytase.

128

Design and Synthesis of codon optimized phytase gene

129

The usage biases of codon in E. coli and P. pastoris are significantly different. To

130

further improve the expression level of recombinant phytase in P. pastoris, the

131

optimized phytase gene was designed in favor of P. pastoris expression by artificially

132

gene synthesized.17-18 The synthesized 1218-bp phytase gene showed 74% homology

7

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

133

with the wild type phytase gene (Figure 1). This synthetic phytase sequence, in which

134

319 nucleotides were changed, was designed to be preferential for P. pastoris by the

135

online program DNAWorks. However, the encoding amino acid sequences of both

136

wild type and synthetic genes were exactly the same. The GC content decreased from

137

54.5% to 49.4%, closer to the actual GC content of other high expression genes in P.

138

pastoris.19 Moreover, to avoid premature termination, the AT-rich codons were

139

eliminated and changed according to the favor codons usage of P. pastoris expression.

140

PCR synthesis and construction of phytase expression pGAPZαC Plasmid

141

The phytase gene of Escherichia coli BL21(DE3) (GenBank Accession No.

142

CP001509.3), with an additional His-tag sequence at 3′-end, was optimized using

143

codon usage preference 17 and synthesized by polymerase chain reaction method. The

144

standard techniques of recombinant DNA protocols were performed according to

145

Ausubel et al.20 and Sambrook et al..21 A 1.29 kb DNA fragment was amplified. The

146

PCR product was first cloned into pUC57 vector (GenScript) and then transformed

147

into Escherichia coli Top 10 F′ competent cells. The nucleotide sequence of resulted

148

products was confirmed using primers by sequencing. After midi-preparation, the

149

correct plasmid was digested with Xho I and Xba I and finally ligated into pGAPZαC

150

vector (Novagen).

151

Transformation and selection in Pichia pastoris Host

8

ACS Paragon Plus Environment

Page 8 of 44

Page 9 of 44

Journal of Agricultural and Food Chemistry

152

The pGAPZαC plasmid, ligated with phytase, was digested with BspHI in the

153

GAP promoter region to linearize the vector and then transformed into Pichia pastoris

154

SMD1168H. The colonies were selected by plating on YPDS agar plates (BD

155

Biosciences, Clontech) containing 1500 µg/mL Zeocin. The yeast colony integrated

156

by recombinant pGAPZαC- phytase DNA with correct in-frame coding sequence into

157

the Pichia genome was used for the protein expression.

158

Cultivation of Pichia pastoris SMD1168H and production of phytase

159

The Pichia pastoris SMD1168H strain integrated with recombinant pGAPZαC

160

-phytase DNA was cultivated in YPDS broth (BD Biosciences, Clontech) at 30 °C

161

with shaking at 250 rpm overnight. The resulted culture was inoculated into a medium

162

containing 1% yeast extract, 2% peptone, 2% dextrose and 100 µg/mL Zeocin and

163

incubated at 30 °C. The phytase activity, pH and viable cell counts (CFU/mL) were

164

monitored during 5 days incubation. After incubation, it was centrifuged at 13,000 ×g,

165

4 °C for 30 min. The supernatant was used for the further purification.

166

Determination of enzyme activity

167

Phytase activity was determined according to Zou et al.22

After 30 min

168

centrifugation at 13,000 ×g, 4 °C and being filtered through a 0.45 µm sterilized

169

membrane (Gelman Sciences, Ann Arbor, MI) to remove cells, phytase sample (0.25

170

mL) or collected phytase samples during purification process were incubated with 1

9

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

171

mL of 2 mM sodium phytate (dissolved in 100 mmol/L sodium acetate, pH 5.5). After

172

the hydrolysis, 1 mL of 15% (w/v) trichloroacetic acid (TCA) was added to stop the

173

reaction. The release of inorganic phosphate from sodium phytate was determined

174

colorimetrically by adding ammonium molybdate, sulfuric acid and ferrous sulfate

175

solution. After 10 min reaction, the absorbance at 700 nm was measured. One unit

176

activity (U) was defined as the amount of enzyme that can liberate 1 µmol of

177

inorganic phosphorus within 1 min reaction at 37 °C.22

178

Purification of phytase

179

The broth was centrifuged at 13,000 ×g, 4 °C for 30 min and then filtered

180

through a 0.45 µm sterilized membrane (Gelman Sciences, Ann Arbor, MI) to remove

181

cells. After being concentrated by Amicon ultrafiltration (cutoff: 10 kDa, Amicon

182

Div., W. R. Grace and Co., Beverly, MA, USA). The concentrated sample was loaded

183

onto a Ni Sepharose 6 Fast Flow column (2.6 × 4.7 cm) pre-equilibrated with a buffer

184

containing 20 mM sodium acetate and 10 mM imidazole (pH 5.5). After washed with

185

the same buffer, the bound proteins were eluted with an elution buffer containing 20

186

mM sodium acetate and 200 mM imidazole (pH 5.5). The absorbance of eluents at

187

280 nm was measured and the phytase activity in each fractions was determined

188

according to Zou et al.22

189

Determination of protein concentration

10

ACS Paragon Plus Environment

Page 10 of 44

Page 11 of 44

Journal of Agricultural and Food Chemistry

190

Protein concentrations were determined by dye binding method

191

serum albumin (BSA) as standard.

192

De-glycosylation

23

using bovine

193

De-glycosylation was performed by using Enzymatic Protein De-glycosylation

194

Kit (Sigma-aldrich, St. Louis, Missouri, USA) according to the protocols of the

195

manufacturer. Briefly, 100 µg of recombinant phytase were dissolved in 30 µL

196

distilled water. Ten mL of reaction buffer and 2.5 mL denaturation solution were

197

added to the phytase solution and mixed gently. The mixture was heated at 100 °C for

198

5 min and then cooled to room temperature. About 2.5 mL TRITON X-100 solution

199

was added to the resulted sample. The phytase solution was then de-glycosylated by

200

mixing with 1 mL each of the PNGase F, O-glycosidase, and α-(2, 3, 6, 8,

201

9)-neuraminidase solutions and incubated at 37 °C for 3 h. De-glycosylated protein

202

was analyzed by SDS–PAGE.

203

Sodium Dodecyl Sulfate Polyacrylamide Gel Electrophoresis (SDS-PAGE)

204

SDS-PAGE analysis was performed with a 10% polyacrylamide gel according to 24

205

Laemmli.

206

R-250 and de-stained according to Neuhoff et al..25 The low molecular weight

207

calibration kit (GE Healthcare Bio-Sciences Corp., MA, USA) was used as markers

208

[Phosphorylase β subunit (97.0 kDa), bovine serum albumin (66.0 kDa), ovalbumin

After electrophoretic running, gels were stained with Coomassie blue

11

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

209

(45.0 kDa), carbonic anhydrase (30.0 kDa), soybean inhibitor (20.1 kDa),

210

α-lactalbumin (14.0 kDa)].

211

Optimal pH and temperature of the purified phytase

212

The optimum pH was determined by measuring the activity at various pH (100

213

mM glycine-HCl buffer 1.0, 2.0, 3.0, 4.0; 100 mM sodium acetate buffer 5.0, 6.0 and

214

100 mM tris-HCl buffer 7.0, 8.0, 9.0) at 37 oC, while the optimal temperature was

215

measured by incubating the reaction mixture at different temperatures (25o-90 °C) for

216

30 min using 1.5 mM sodium phytate as substrate.22 The maximal phytase activities

217

at optimal pH and temperature were defined as 100%.

218

purified recombinant phytase were used in the determination of optimal pH and

219

temperature.

220

pH and thermal stability of the purified phytase

About 0.225 nmol of the

221

The pH stability was determined by measuring the residual phytase activity after

222

30 min incubation at 37 oC, different pH values (100 mM glycine-HCl: pH 1.0–4.0),

223

100 mM sodium acetate: pH 4.0–6.0, 100 mM Tris-HCl: pH 6.0–9.0) according to

224

Zou et al. 22

225

The thermal stability was determined by measuring the residual phytase activity

226

after 5 and 30 min incubation in 20 mM sodium acetate buffer (pH 5.5) at

227

temperatures from 25o to 95 oC according to Zou et al. 22

12

ACS Paragon Plus Environment

Page 12 of 44

Page 13 of 44

Journal of Agricultural and Food Chemistry

228

Effects of metal ions, inhibitors or reducing agent

229

To investigate the effect of metal ions, purified recombinant phytase in 20 mM

230

sodium acetate buffer (pH 5.5) with 5 and 10 mM of Ag+, K+, Li+, Na+, Ba2+, Ca2+,

231

Cd2+, Co2+, Cu2+, Fe2+, Hg2+, Mg2+, Mn2+, Ni2+, Zn2+ and Fe3+ were incubated at 37 oC.

232

After 30 min incubation, the residual phytase activity was measured according to Zou

233

et al.22

234

To investigate different inhibitors effects, the purified phytase in 20 mM sodium

235

acetate buffer (pH 5.5) with 1 to 5 mM ethylene diamine tetraacetic acid (EDTA),

236

ethylene

237

p-chloromercuribenzoate (pCMB) and phenylmethyl sulfonyl fluoride (PMSF) or

238

reducing agents such as dithiothreitol (DTT), glutathione (GSH), β-mercaptoethanol

239

(β-Me) was incubated at 37 oC for 30 min. The residual enzyme activity was

240

measured according to Zou et al.22

241

Substrate specificity and kinetic analysis

glycol

tetraacetic

acid

(EGTA),

N-ethylmaleimide

(NEM),

242

To determine the substrate specificity, purified phytase in 20 mM sodium acetate

243

(pH 5.5) was incubated with 1.5 mM p-nitrophenyl phosphate (pNPP),

244

sodium-phytate (with 9 sodium, Sigma-Aldrich Inc.), calcium-phytate (with 6 sodium,

245

Sigma-Aldrich Inc.), fructose 1,6-bisphosphate (F-1,6-PP) and glucose 6-phosphate

246

(G-6-P) at 37 oC for 30 min. The activity was measured according to Zou et al.22 The

13

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 14 of 44

247

kinetic parameters of KM and Vmax were determined by incubating the phytase with

248

various substrate concentrations (0.1-20 mM) in 20 mM sodium acetate buffer (pH

249

5.5) at 37 oC and calculated by Michaelis–Menten equation. The kcat was determined

250

with the equation: Vmax=kcat [E], where [E] is the enzyme concentration. The ratio of

251

kcat/KM was used to evaluate the catalytic efficiency of recombinant phytase.

252

Pepsin and trypsin tolerance tests

253

Pepsin in 80 mM glycine-HCl (pH 2.0) and trypsin in 80 mM NH4H2CO3 (pH

254

7.5) were used to evaluate the proteolytic effects on phytase. Purified recombinant

255

phytase was incubated with various amounts of pepsin or trypsin at ratios

256

(protease/phytase) ranging from 0.002, 0.005, 0.01, 0.02 and 0.1 at 37 oC for 2 h. The

257

residual activity was measured by the method described above.22

258

Genetic stability of the recombinant P. pastoris

259

To investigate the stability of inheritance and expression level of the

260

recombinant phytase genes in P. pastoris, the mutant colonies were selected on YPDS

261

(YPD with sorbitol) agar plate containing 1,500 µg/mL Zeocin. They were transferred

262

into 10 mL YPD broth and incubated with shaking (250 rpm) at 30 oC.

263

incubation, 1% of culture was inoculated into 250 mL YPD broth with/without 100

264

µg/mL Zeocin.

265

expression levels were determined after 10 generations according to Zaghloul et al.26

After 24 h

This procedure was repeated 10 times. Phytase activities and gene

14

ACS Paragon Plus Environment

Page 15 of 44

Journal of Agricultural and Food Chemistry

266

and Xiong et al. 27. [Plasmid stability (%) = (CFU of YPD broth with Zeocin/CFU of

267

YPD broth without Zeocin) × 100%]

268

Statistical analysis

269

One-way analysis of variance (ANOVA) was used to determine the significance of

270

differences within treatments using the Statistical Analysis System ([SAS/STAT],

271

Release 8.0; Carry, NC, USA). For each treatment, three replicates were measured

272

and the mean values were calculated. Values were considered to be significantly

273

different when P 8.0, Figure 6). Therefore, control of pH at