PDF (1 MB) - American Chemical Society

another AFM-TI material, MnBi2Te4, a van der Waals compound with out-of-plane FM layers.8. And yet, a major drag on the rapidly evolving field of topo...
0 downloads 0 Views 1MB Size
This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes.

Reactions FIRSTFirst REACTIONS

Utilizing Chemical Intuition in the Search for New Quantum Materials Tanja Scholz,† and Bettina V. Lotsch,†,‡ †

Max Planck Institute for Solid State Research, Heisenbergstraße 1, 70569 Stuttgart, Germany



Downloaded via 46.148.120.61 on July 30, 2019 at 23:07:06 (UTC). See https://pubs.acs.org/sharingguidelines for options on how to legitimately share published articles.

University of Munich (LMU), Butenandtstraße 5-13, 81377 München, Germany

Antiferromagnetism and topologically non-trivial properties joined in EuSn2P2, a compound by design.

B

uilding on the technological achievements of the 20th century, driven by semiconductor technology and miniaturization, the 21st century has evolved an unquenchable thirst for new materials that exhibit exotic properties to master the grand challenges of today, including smart electronic devices, quantum computing, and efficient catalysts for sustainable energy conversion. The specialization of such systems calls for strategies to design tailormade materials from scratch to satisfy increasingly complex requirements. In this very issue of ACS Central Science, Gui et al. take the reader on an inspiring journey utilizing rational design to synthesize a new topological insulator candidate that exhibits intrinsic long-range magnetic order.1 So far, scientists that aimed for unconventional quantum states originating from “topology+” used the design of heterostructures to combine different electronic phases from distinct materials, rather than realizing such phenomena within a single material.2,3

Figure 1. Crystal structure of the layered antiferromagnet EuSn2P2.1

topologically non-trivial materials known today is topological insulators, in which the order of electronic bands is mixed up so that the resulting solid has an inverted band structure at one point in the Brillouin zone but is normal in other parts. Thus, conducting edge or surface states appear at the interface between a topological and a normal insulator, including air.5 These electrons can flow without being perturbed by back-scattering, which opens up new horizons for spintronic devices, quantum computing, or even catalysis. In 2010, Mong and co-workers theoretically predicted antiferromagnetic topological insulators (AFM-TI).6 Already AFM materials as such are hoped to revolutionize electronic devices due to effects like spin torques, magnetoresistance, or ultrafast dynamics, but combined with non-trivial topology, they may lead to a plethora of exotic physics and new applications. Almost a decade later, Gui et al. have now taken up the challenge to design an AFM-TI and deduced some general design rules from a chemist’s perspective:1 First, they emphasize the importance of choosing elements that are known to establish different kinds of chemical bonding and

So far, scientists that aimed for unconventional quantum states originating from “topology+”, used the design of heterostructures to combine different electronic phases from distinct materials, rather than realizing such phenomena within a single material. The field of topological materials emerged in 2005, when Kane and Mele described the electronic structure of graphene.4 The prototype among the wider class of © 2019 American Chemical Society

Published: May 3, 2019 750

DOI: 10.1021/acscentsci.9b00429 ACS Cent. Sci. 2019, 5, 750−752

Reactions FIRSTFirst REACTIONS

ACS Central Science

Figure 2. Topologically nontrivial materials are a multifaceted challenge that needs to be approached from different angles, as chemical concepts, materials design and synthesis, electronic structure analysis, and properties evaluation are inseparably linked. Parts adapted from ref 10. Copyright 2018 American Chemical Society, and Schoop, L. M.; Ali, M. N.; Straßer, C.; Topp, A.; Varykhalov, A.; Marchenko, D.; Duppel, V.; Parkin, S. S. P.; Lotsch, B. V.; Ast, C. R. Nat. Commun. 2016, 7, licensed under CC BY 4.0.

and electronic band structure. The material is weakly metallic and exhibits a large concentration of holes responsible for the transport of electronic charge, which in turn is sensitive to the intrinsic magnetic state. At this point, it is instructive to look at the electronic band structure close to the Fermi level up to which the bands are filled with electrons. This is where interesting topological physics can emerge, for example, in the form of protected band crossings, multiply degenerate points, or band inversions, which may give rise to exotic surface states or host quasiparticles such as Dirac or Majorana fermions. The experimental signature of such peculiarities in the band structureif they are not occluded by topologically trivial featuresis an unusual behavior in magneto-transport measurements. The authors used comprehensive DFT calculations and indeed identified the band inversion of a topological insulator in the band structure. A real crystal (unlike an ideal one having an infinitely periodic crystal structure) is terminated at its surface; in the case of a layered material, this is most likely the 2D cleavage plane. Considering different possible terminations (Eu, Sn, or P), the authors calculated the shape of the characteristic surface states. In the lab, the method of choice to record the electronic structure at a single crystal’s surface is angle-resolved photoemission spectroscopy (ARPES). Only quantum oscillations can be more telling about the Fermi surface, but this method requires an even better single crystal quality than ARPES. With ARPES, the authors were able to reveal a close agreement between experimental and calculated electronic bands and, by the shape of the surface states, they were able to conclude that the

exhibit large spin−orbit coupling to access the mentioned band inversion. Second, they point out that known unconventional materials (Bi2Se3, Cd3As2, WTe2, etc.) are often low-dimensional in their electronic structure, thus avoiding the interference of other electronic bands with the topological feature of interest. Third, in search for magnetic properties, the incorporation of an element whose magnetic properties stem from localized, hence weakly interacting, 4f electrons, was necessary. Linking all of these ideas toward a new material is ambitious, but this is exactly what the authors have achieved in their work by designing and realizing the novel compound EuSn2P2. The layered EuSn2P2 (cf. Figure 1) is a new member of the group of two-dimensional solids, a hallmark of which is a low-dimensional electronic structure. In the stacking direction, 2D materials are generally weakly bound and exhibit a clear cleavage plane that is beneficial for studying the surface physics mentioned above. Additionally, this compound adds to the small subgroup of magnetic 2D materials. EuSn2P2 is antiferromagnetic, since the magnetic moments of Eu2+ ions align ferromagnetically in a layer, oriented perpendicular to the stacking direction, but couple in the opposite direction compared to the neighboring layers. Furthermore, EuSn2P2 is straightforward to synthesize for a trained solid-state chemist and its magnetic properties already emerge below 30 K, an experimentally well-accessible temperature, making the compound a prime candidate for future experiments. Gui et al. employ the common suite of solid-state characterization techniques to thoroughly describe the magnetism, transport properties, 751

DOI: 10.1021/acscentsci.9b00429 ACS Cent. Sci. 2019, 5, 750−752

Reactions FIRSTFirst REACTIONS

ACS Central Science

To summarize, Gui et al. succeeded in the rational design and realization of a new magnetic quantum material, EuSn2P2. This accomplishment serves as an inspiration for collaborations across disciplines and encourages a wider community of chemists to get involved. The significant strides made in this work toward a new family of exciting materials by marrying topologically nontrivial properties with magnetism are only the beginning. It will be interesting to see what is next.

termination of the crystal is phosphorus. Finally, they digged deep into theoretical condensed-matter physics and calculated the Z2 invariant (a classification scheme for topological insulators based on symmetry), confirming EuSn2P2 to be an antiferromagnetic, strong topological insulator. The experimental realization of an AFM-TI has implications for fundamental research into exotic phenomena such as quantized magnetoelectric coupling,6 intrinsic axion insulator state,7 chiral Majorana fermions, or the quantum anomalous Hall effect. These prospects have already resonated with the scientific community, and just recently, Otrokov and co-workers succeeded in the synthesis of another AFM-TI material, MnBi2Te4, a van der Waals compound with out-of-plane FM layers.8 And yet, a major drag on the rapidly evolving field of topological materials is the small number of experimentally confirmed materials. For the field to flourish, realistic candidates are desperately needed that are easy to fabricate as large single crystals, do not display structural overcomplexity due to large-scale atomic disorder or vacancies, and exhibit the electronic transitions of interest at accessible temperatures. By training, chemists are equipped with the unique ability to synthesize new compounds, to swiftly evaluate crystal structures based on their symmetry, and to routinely draw on well-developed bonding theories based on size relations or electronegativity of the elements. 200 years of empirical knowledge have bestowed chemists with a certain intuition for thermodynamic stability, reactivity, and crystal chemistry. It would be wise to tap into this pool of experience on the hunt for new materials with unconventional properties. Undoubtedly, physical knowledge is crucial, and we argue for a close collaboration between condensed-matter physicists, solid-state chemists, material scientists, and theoreticians (Figure 2), such as in the discussed work.9,10

Author Information

E-mail: [email protected]. ORCID

Bettina V. V. Lotsch: Lotsch: 0000-0002-3094-303X 0000-0002-3094-303X Bettina Funding

We gratefully acknowledge financial support by the Max Planck Society.



REFERENCES REFERENCES (1) Gui, X.; Pletikosic, I.; Cao, H.; Tien, H.-J.; Xu, X.; Zhong, R.; Wang, G.; Chang, T.-R.; Jia, S.; Valla, T.; Xie, W.; Cava, R. J. ACS Cent. Sci. 2019, DOI: 10.1021/acscentsci.9b00202. (2) Katmis, F.; Lauter, V.; Nogueira, F. S.; Assaf, B. A.; Jamer, M. E.; Wei, P.; Satpati, B.; Freeland, J. W.; Eremin, I.; Heiman, D.; JarilloHerrero, P.; Moodera, J. S. Nature 2016, 533, 513−516. (3) Tokura, Y.; Yasuda, K.; Tsukazaki, A. Nature Reviews Physics 2019, 1, 126−143. (4) Kane, C. L.; Mele, E. J. Phys. Rev. Lett. 2005, 95, 226801. (5) Ando, Y. J. Phys. Soc. Jpn. 2013, 82, 102001. (6) Mong, R. S. K.; Essin, A. M.; Moore, J. E. Phys. Rev. B: Condens. Matter Mater. Phys. 2010, 81, 245209. (7) Li, R.; Wang, J.; Qi, X.-L.; Zhang, S.-C. Nat. Phys. 2010, 6, 284− 288. (8) Otrokov, M. M.; Klimovskikh, I. I.; Bentmann, H.; Zeugner, A.; Aliev, Z. S.; Gass, S.; Wolter, A. U. B.; Koroleva, A. V.; Estyunin, D.; Shikin, A. M.; Blanco-Rey, M.; Hoffmann, M.; Vyazovskaya, A. Y.; Eremeev, S. V.; Koroteev, Y. M.; Amiraslanov, I. R.; Babanly, M. B.; Mamedov, N. T.; Abdullayev, N. A.; Zverev, V. N.; Büchner, B.; Schwier, E. F.; Kumar, S.; Kimura, A.; Petaccia, L.; Di Santo, G.; Vidal, R. C.; Schatz, S.; Kißner, K.; Min, C.-H.; Moser, S. K.; Peixoto, T. R. F.; Reinert, F.; Ernst, A.; Echenique, P. M.; Isaeva, A.; Chulkov, E. V. Prediction and observation of the first antiferromagnetic topological insulator. 2018, arXiv:1809.07389. arXiv.org e-Print archive. https://arxiv.org/abs/1809.07389. (9) Müchler, L.; Zhang, H.; Chadov, S.; Yan, B.; Casper, F.; Kübler, J.; Zhang, S.-C.; Felser, C. Angew. Chem., Int. Ed. 2012, 51, 7221− 7225. (10) Schoop, L. M.; Pielnhofer, F.; Lotsch, B. V. Chem. Mater. 2018, 30, 3155−3176.

By training, chemists are equipped with the unique ability to synthesize new compounds, to swiftly evaluate crystal structures based on their symmetry, and to routinely draw on well-developed bonding theories based on size relations or electronegativity of the elements. 200 years of empirical knowledge have bestowed chemists with a certain intuition for thermodynamic stability, reactivity, and crystal chemistry. 752

DOI: 10.1021/acscentsci.9b00429 ACS Cent. Sci. 2019, 5, 750−752