Simply the best dye laser for your research Simple Wavelength Drive: The traditional mechanical sine drive of other dye lasers has been replaced in the HyperDYE"L300 with a precision worm and wheel gear, a close coupled high resolution shaft encoder and electronic angle/wavelength conversion. Simpler and more reproducible calibration is the result.
Simple Tuning: The grazing incidence oscillator eliminates the need for étalons and enables you to tune continuously over the full gain-width of any dye, with a linewidth of 0.003 nm, or less.
Simple Alignment: The entire oscillator stage is mounted in one solid cast block, pre-aligned during manufacture. Pump beam and amplifier cell adjustment controls are all accessible from above the internal dust cover, eliminating any possible safety hazard.
Simple Controls: A newly designed keypad controller provides a full range of scan functions — continuous, burst or triggered. You also have the option of controlling the laser from a host computer with our menu driven software.
The Lumonics HyperDYE^OO Scientific productivity is the name of the game. Your experimental time is too valuable to be wasted on operating and maintaining
overly-complex or restrictive equipment. The new Lumonics HyperDYE-300, pumped by either an excimer or Nd:YAG
laser, is designed as a simple and straightforward instrument, capable of satisfying the majority of research requirements.
The world leader in pulsed lasers LUMONICS For more information, call: Eastern U.S.: Lumonics Inc. (201) 895-4508 Western U.S.: Lumonics Inc. (805) 388-1588 Head Office: Lumonics Inc. (613) 592-1460 United Kingdom: Lumonics Ltd. (0788) 70321 France: Lumonics S.A.R.L. (16) 907 9270 West Germany: Lumonics Deutschland GmbH (089) 871 1039 Benelux: Lumonics Ltd. (02) 762 79 46 Japan: Leonix Corp. (3) 232111 'HyperDYE is a registered trademark of Lumonics Inc.
CIRCLE 97 ON READER SERVICE CARD
