Stop wasting vinyl dispersion resin Replace 45%, 50%,60%
Replace 50% of your low-viscosity paste resin with new PLIOVIC M-50. Inherent viscosity is 0.73 - 0.03, average particle size, 17 microns. PLIOVIC® M-50 maintains viscosity stability and good physicals at the standard fusion cycle. Yet it cuts f o r m u l a t i o n costs. Seven to ten minutes at 375°F are recommended for fusion. Use it in any expanded-vinyl system employing a low plasticizer level. Replace 45% of your vinyl dispersion resin with PLIOVIC M-70 modifying resin. Reduce both high and low shear viscosity. Widen your formulation range.
PLIOVIC M-70 has small (17 m i c r o n s ) , low-porosity particles. Reduces streaking, graininess. Free of soapy residuals. Keeps physicals high, minimizes settling. Applications: slush molding, roto-casting, metal and fabric coating, dipping and "in place" molding. Replace 60% of your vinyl dispersion resin with PLIOVIC M-90 blending resin. Inherent viscosity—1.15 ± 0.04 —is as high as general-purpose dispersion resins. Particles are extremely fine —12.6 microns. So PLIOVIC M-90 maintains high tensile, hot tear strength, other physicals.
Actually increases film tear strength. Applications include expanded vinyls, unsupported films, "in place" gaskets, "low" and "no" pressure moldings. The PLIOVIC dispersion resins also include PLIOVIC AO, a PVC copolymer, and PLIOVIC WO, a straight PVC dispersion resin. Both available in three paste viscosities, o f f e r i n g wide c o m p o u n d i n g latitude. Write for PLIOVIC samples, literature and list of custom compounders. Don't waste a minute. Goodyear Chemical Data Center, Dept. Q-16, Box 9115, Akron, Ohio, 44305.
GOOD/^EAR
CHEMI GALS C&EN 1
