Structural Characterization of a Novel Polysaccharide from - American

Subscriber access provided by Fudan University

Article

Structural Characterization of a Novel Polysaccharide from Lepidium meyenii (maca) and Analysis of Its Regulatory Function in Macrophage Polarization in vitro Mengmeng Zhang, Wenjia Wu, Yao Ren, Xiao-Feng Li, Yuqian Tang, Tian Min, Furao Lai, and Hui Wu J. Agric. Food Chem., Just Accepted Manuscript • DOI: 10.1021/acs.jafc.6b05218 • Publication Date (Web): 24 Jan 2017 Downloaded from http://pubs.acs.org on January 25, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Journal of Agricultural and Food Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 44

Journal of Agricultural and Food Chemistry

1

Structural Characterization of a Novel Polysaccharide from

2

Lepidium meyenii (maca) and Analysis of Its Regulatory Function in

3

Macrophage Polarization in vitro

4 5

Mengmeng Zhang1, Wenjia Wu1, Yao Ren2, Xiaofeng Li1, Yuqian Tang1, Tian Min1, Furao Lai1*, and Hui Wu1*

6 7 8

Affiliation

9

1 College of Food Sciences and Engineering, South China University of Technology,

10

Guangzhou, Guangdong 510640, China

11

2 College of Light Industry, Textile and Food Engineering, Sichuan University,

12

Chengdu, 610065, China

13 14

Short title: Structural Characterization and Regulation in Macrophage Polarization of

15

Maca Polysaccharide

16 17 18

Co-corresponding authors:

19

Hui Wu, Department of Food Quality and Safety, South China University of

20

Technology, Wushan Road 381, Guangzhou, Guangdong, China.

21

Tel: (+86) 20-87112853; E-mail: [email protected]; Fax: (+86)20-87112532

22

Furao Lai, Department of Food Quality and Safety, South China University of

23 24

Technology, Wushan Road 381, Guangzhou, Guangdong, China. Tel: (+86) 20-87112373; E-mail: [email protected]; Fax: (+86)20-87112532 1

ACS Paragon Plus Environment


25

ABSTRACT: In our previous study, three novel polysaccharides, named MC-1,

26

MC-2, and MC-3, were separated from the roots of maca (Lepidium meyenii), which

27

is a food source from the Andes region. The structural information and

28

immunomodulatory activity of MC-1 were then investigated. The structure and

29

activity of MC-2 is still unknown. In this study, structural characterization revealed

30

that MC-2 has an average molecular weight of 9.83 kDa and is composed of arabinose

31

(20.9%), mannose (4.5%), glucose (71.9%), and galactose (2.7%). The main linkage

32

types of MC-2 were proven to be (1→5)-α-L-Ara, (1→3)-α-L-Man, (1→)-α-D-Glc,

33

(1→4)-α-D-Glc, (1→6)-α-D-Glc, and (1→6)-β-D-Gal by methylation and NMR

34

analyses. Congo red assay showed that MC-2 possesses a triple helix conformation.

35

Immunostimulating assays indicated that MC-2 could induce M1 polarization of

36

original macrophages and convert M2 macrophages into M1 phenotype. Although

37

MC-2 could not shift M1 macrophages into M2, it could still inhibit inflammatory

38

reactions induced by LPS. Furthermore, toll-like receptor 2, toll-like receptor 4,

39

complement receptor 3, and mannose receptor were confirmed as the membrane

40

receptors for MC-2 on macrophages. These results indicate that MC-2 could

41

potentially be used toward hypoimmunity and tumor therapies.

42 43

KEYWORDS: polysaccharides, maca, structure, macrophage , polarization

2


Page 2 of 44

Page 3 of 44


44

INTRODUCTION

45

Maca (Lepidium meyenii) is a food source that has been used to enhance fertility for

46

centuries in the Andes region.1, 2 Recently, maca has attracted interest as a dietary

47

supplement owing to its various pharmacological properties, and as a result, many

48

effective compounds in maca were identified, including macaenes, macamides,

49

glucosinolates, alkaloid, and flavonolignans.3-7 However, little attention has been

50

devoted to the maca polysaccharides. In our previous study, three new

51

polysaccharides, named, MC-1, MC-2, and MC-3 were separated from the roots of

52

maca. The primary chemical structure and immunomodulatory activity of MC-1 was

53

then investigated.8 However, the structure of MC-2 is still unknown.

54

Macrophages are an essential component of innate immunity and play a

55

central role in inflammation and host defense. Macrophage functions are elicited

56

in response to microenvironmental signals, which drive the acquisition of polarized

57

programs, whose extremes are simplified in the M1 and M2 dichotomy.9 M1

58

macrophages (classically activated) exert pro-inflammatory activity. They have been

59

known to be induced by interferon (IFN) or lipopolysaccharide (LPS), and release

60

pro-inflammatory cytokines, such as TNF-α and IL-6, and nitric oxide (NO). M1

61

macrophages are considered to mediate host defense against microbial infections and

62

tumors, but also cause autoimmune tissue damage.10 IL-4 and IL-13 were found to

63

induce alternatively activated M2 macrophages, which are involved in inflammation

64

resolution and tissue repair.11 IL-10 (anti-inflammation cytokine) and arginase-1

65

(Arg-1) represent the signature molecules of M2 macrophages. However, M2 3



66

macrophages are also involved in metazoan parasite containment, immune tolerance,

67

and tumor progression.12 Macrophage M1 and M2 phenotype responses generate

68

opposing activities in terms of killing and repairing processes. An imbalance in

69

macrophage M1-M2 polarization is often associated with various diseases or

70

inflammatory conditions.13

71

Plasticity and flexibility are key features of mononuclear phagocytes and their

72

activation states. The phenotype of polarized M1-M2 macrophages can, to some

73

extent, be reversed both in vitro and in vivo.14 Polysaccharides obtained from

74

natural sources are known to govern the immunomodulatory activity of macrophages.

75

Many polysaccharides can induce macrophage-produced pro-inflammatory cytokines

76

TNF-α, IL-1b, IL-6, and IL-12.15-17 Conversely, some polysaccharides have been

77

shown to have anti-inflammatory activities.18-20 These observations indicate that the

78

immunomodulatory activity of polysaccharides is relative to macrophage polarization.

79

However, few reports about the immunomodulatory activity of polysaccharides have

80

focused on the different macrophage phenotypes. Given the fact that MC-1 has

81

stimulating effects on macrophages, we hypothesized that MC-2 displays a similar

82

effect.

83

In the present study, the primary chemical structure of MC-2 was characterized.

84

The regulation of MC-2 on the polarization of RAW 264.7 cells, a murine

85

macrophage cell line, was investigated by determining the markers of M1, IL-6 and

86

inducible nitric oxide synthase (iNOs), and markers of M2, IL-10 and Arg-1. The

87

potential membrane receptors of MC-2 on RAW 264.7 cells were also explored. The 4


Page 4 of 44

Page 5 of 44


88

results obtained from this study might provide useful information toward enabling

89

further in-depth studies on polysaccharides present in maca.

90

MATERIALS AND METHODS

91

Chemicals

92

The roots of maca were collected from Peru. Myoinositol and standard

93

monosaccharides (xylose, rhamnose, arabinose, fucose, mannose, glucose, and

94

galactose)

95

Diethylaminoethyl (DEAE)-Sepharose Fast Flow was obtained from Shanghai

96

Yuanye Bio-Technology Company Limited (Shanghai, China). Sephadex G-50 was

97

acquired from GE Healthcare Life Science (Piscataway, NJ). RAW 264.7 cells were

98

obtained from the Type Culture Collection of the Chinese Academy of Sciences

99

(Shanghai, China). Dulbecco’s modified eagle’s medium (DMEM), fetal bovine

100

serum (FBS), penicillin, and streptomycin were purchased from Gibco Life

101

Technologies (Grand Island, NY). Griess reagent was purchased from Sigma-Aldrich

102

(NSW, Australia). Mouse TNF-α, IL-10 and IL-6 detection ELISA kits were

103

purchased from R＆ D Systems. TRIzol was purchased from Invitrogen, USA;

104

Transcriptor First Strand cDNA Synthesis Kit and FastStart Universal SYBR Green

105

Master (ROX) were purchased from Roche. Anti-scavenger receptor I antibody

106

(anti-SR), anti-mannose receptor antibody (anti-MR), anti-beta glucan receptor

107

antibody (anti-GR), anti-toll-like 2 antibody (anti-TLR2), anti-complement receptor 3

108

antibody (anti-CR3), and anti-toll-like 4 receptor antibody (anti-TLR4) were obtained

were

purchased

from

Sigma-Aldrich

(St.

5


Louis,

MO,

USA).


109

from Abcam (Cambridge, MA). All of the other chemical reagents used in this study

110

were of analytical grade.

111

Extraction and Purification of Polysaccharides from the Roots of Maca

112

The extraction method was the same as in our previous study.21 Briefly, the powder

113

of dried roots of maca was extracted with boiling water at a ratio of 1:30 (w/v) for 2 h,

114

and the obtained extract was then centrifuged at 4000 × g for 15 min. After the

115

supernatant was concentrated at 60 °C, the protein was removed according to the

116

Sevag method. The resulting solution was precipitated with four volumes of 100%

117

ethanol at 4 °C for overnight, and then centrifuged at 4000 × g for 15 min to collect

118

the precipitates. Finally, the precipitate was redissolved in distilled water prior to

119

lyophilization to obtain crude polysaccharides.

120

The purification method is similar to that used in the previous study, with some

121

modifications.22 A total of 50 mg of crude polysaccharides was dissolved in 10 mL of

122

ultrapure water and loaded onto a pre-equilibrated DEAE-Sepharose Fast Flow

123

chromatography column (1.6×35 cm) at a flow rate of 1 mL/min, followed by and

124

elution step with distilled water. The eluent fractions were collected and concentrated

125

at 60 °C by rotary vacuum evaporator, then dialyzed (MW cut off 5.0 kDa) at 4 °C for

126

48 h and freeze-dried. In our previous study, a Sephadex G-100 column could not

127

totally separate the fractions. Therefore, in this study, a Sephadex G-50

128

chromatography column (1.6 × 60 cm) was used to yield a better purification process.

129

The fraction (20 mg) was dissolved in distilled water (10 mL) at 25 °C. The column

130

was washed with 0.3 L of distilled water at a flow rate of 1 mL/min for 300 min. The 6


Page 6 of 44

Page 7 of 44


131

eluent was detected according to the phenol-sulfuric acid method and collected before

132

concentrating the polysaccharide solution. As previously, when we studied MC-1,

133

three peaks were obtained (Figure 1). In this study, we mainly focused on

134

investigating of MC-2.

135

MC-2 Molecular Weight Determination

136

The weight-average molecular weight of MC-2 was determined through

137

high-performance gel permeation chromatography (HPGPC) using a Waters HPLC

138

system including two serially linked columns a TSK-GEL G-5000 PWXL column

139

(300 mm×7.8 mm inner diameter, 10µm) and a TSK-GEL G-3000 PWXL column

140

(300 mm×7.8 mm inner diameter, 6µm), a Waters 2410 differential refractive index

141

detector, eluted with 0.02 mol/L KH2PO4 at a ﬂow rate of 0.6 mL/min. MC-2 (2.5 mg)

142

was dissolved in 1 mL mobile phase.

143

Infrared Spectrum Analysis

144

The MC-2 samples (2-3 mg) were analyzed according to the potassium bromate

145

pellet method with a Fourier transform infrared (FTIR) spectrophotometer (Bruker,

146

Ettlingen, Germany) in the 400-4000 cm-1 vibrations region.23

147

Monosaccharide Composition

148

A total of 10 mg MC-2 sample was hydrolyzed in 4 mL of 2 mol/L trifluoroacetic

149

acid (TFA) for 8 h at 110 °C. Polysaccharides were transformed into alditol acetates

150

by hydrolysis. The MC-2 alditol acetates were analyzed by gas chromatography (GC)

151

(Agilent, US) fitted with a HP-5 capillary column (30 nm×0.32 mm×0.25 µm,

152

160~210 °C at 2 °C /min, and then 210~250 °C at 10 °C /min) equipped with a flame 7



153

ionization detector (FID). Glucose, galactose, fucose, rhamnose, mannose, xylose, and

154

arabinose were used as the monosaccharide standards. Myoinositol was used as the

155

internal reference.

156

Methylation Analysis

157

The methylation analysis of polysaccharide was performed according to the 21

158

method reported by Nie et al

,with some modifications. MC-2 (10 mg) was

159

dissolved in 6 mL anhydrous DMSO at 60 °C for 2 h and sonicated for 1 h. NaOH

160

(240 mg) was added to the solution, which was subsequently left to react at 60 °C

161

overnight. The mixture was added to a 3.6 mL methyliodide solution and stirred for 8

162

min. This procedure was repeated three times and stopped by adding 6 mL of distilled

163

water. The solution obtained was dialyzed against distilled water for 48 h at 4 °C. The

164

methylated polysaccharide was extracted with dichloromethane three times. The

165

dichloromethane extract was then dried over sodium sulfate, and evaporated to

166

dryness. The dried methylated polysaccharide was hydrolyzed as describe above. The

167

hydrolysate was reduced by sodium borodeuteride (70 mg) and acetylated with acetic

168

anhydride (0.5 mL). Finally, the resulting product was analyzed by gas

169

chromatography (GC) coupled with mass spectrometry (MS) (Agilent, USA) using a

170

TR-5MS capillary column (30 m ×0.25 mm ×0.25 µm, 150~180 °C at 10 °C /min, and

171

then 180~260 °C at 15 °C /min).

172

NMR Spectroscopy

8


Page 8 of 44

Page 9 of 44


173

About 30 mg of MC-2 was dissolved in 0.55 mL of heavy water (D2O) in a NMR 13

C NMR and 1H NMR spectra were recorded on a Bruker 600

174

tube and then, the

175

MHz NMR apparatus (Bruker Corp, Fallanden, Switzerland) at 60 °C.

176

Determination of Triple-helix Structure

177

The conformational structure of MC-2 was determined following the Congo red

178

method.22

179

Measurement of cytokines

180

RAW 264.7 cells were incubated at 37°C in a humidified atmosphere with 5%

181

CO2. DMEM medium with 10% FBS, 100 µg/mL streptomycin, and 100 units/mL

182

penicillin was used as the culture medium. Cells were adjusted to a concentration of 1

183

× 106 cells/mL in the exponential phase, loaded onto 96-well or 6-well plates, and

184

continuously incubated for 24 h.

185

Cells were treated with different concentrations of MC-2 (62.5, 125, 250, 500,

186

1000 µg/mL), MC-1 (1000 µg/mL), LPS (1 µg/mL) or IL-4 (20 ng/mL) and incubated

187

for 24 h. After that, the cell supernatants were collected and the levels of IL-6 and

188

IL-10 were measured using the ELISA kits.

189

QPCR Analysis

190

RAW 264.7 cells were seeded on 6-well plates at a concentration of 1 × 106

191

cells/mL. After 24 h, cells were treated with different concentrations of MC-2 (62.5,

192

125, 250, 500, 1000 µg/mL), MC-1 (1000 µg/mL), LPS (1 µg/mL) or IL-4 (20 ng/mL).

193

After 12 h, the cells were lysed to isolate total RNA.

9



194

Total RNA was isolated using TRIzol reagent according to the manufacturer’s

195

protocol, and the RNA was used for cDNA synthesis using reverse transcriptase. The

196

cDNA encoding iNOs and Arg-1 genes was quantified by quantitative real-time PCR

197

assay (QPCR). GAPDH was used as the internal reference. The specific primers used

198

are described in Table 1. Gene amplification was carried out with the ABI 7500

199

sequence detection system (Applied Biosystems, Foster, USA).

200

MC-2 Treatment After Polarization

201

Cells within the control group were cultured in medium without any treatment.

202

Cells in the other groups were polarized to M1 with LPS (1 µg/mL) for 12 h, and then

203

treated with combinations of different concentrations of MC-2 (0, 31.25, 125, 500

204

µg/mL) and LPS (1 µg/mL) for 24 h. M2 macrophages were polarized by IL-4 (20

205

ng/mL) using the same procedure. Following polarization, cells were collected for the

206

determination of iNOS and Arg-1 mRNA levels, and the supernatants were used to

207

measure the levels of IL-6 and IL-10.

208

Investigation of Membrane Receptors

209

The cells were pretreated with antibodies (5 µg/mL) against membrane receptors

210

(SR, MR, GR, CR3, TLR2 and TLR4) or a mixture of antibodies against MR, CR3,

211

TLR4, and TLR2 for 2 h prior to stimulation with MC-2 (125 µg/mL). The group

212

treated with only MC-2 (125 µg/mL) was used as the control. The untreated cells were

213

used as the negative control group. LPS-treated cells represented the positive control.

214

The levels of NO, TNF-α, and IL-6 were measured after 24 h .23 NO, TNF-α, and IL-6

215

were measured using a Griess reagent and ELISA kits, respectively. 10


Page 10 of 44

Page 11 of 44


216

Statistical Analysis

217

Data are expressed as the mean± standard deviation (SD) of three replicates.

218

Significant differences between the means of parameters were calculated by Duncan’s

219

multiple-range test using SPSS 17.0 software (SPSS, Inc., Chicago, IL, USA). p

Structural Characterization of a Novel Polysaccharide from - American

Recommend Documents