Surface Morphology of Nafion at Hydrated and Dehydrated Conditions

Mar 15, 2013 - At ambient conditions, Nafion's surface morphology resembles that proposed ... available by participants in Crossref's Cited-by Linking...
4 downloads 3 Views 934KB Size
Article pubs.acs.org/Macromolecules

Surface Morphology of Nafion at Hydrated and Dehydrated Conditions James R. O’Dea,† Nicholas J. Economou, and Steven K. Buratto* Department of Chemistry and Biochemistry, University of California, Santa Barbara, California 93106-9510, United States S Supporting Information *

ABSTRACT: The relation between proton exchange membrane (PEM) hydration and fuel cell performance has been well documented at the macroscopic scale. Understanding how changes in membrane water content affect the organization of proton conducting domains at the micrometer and submicrometer scales is a sought-after goal in the rational design of higher performing PEMs. Using atomic force microscopy phase and current imaging, we have resolved proton conducting domains at the surface of Nafion membranes at dehydrated, ambient, and hydrated conditions, observing a unique morphology at each membrane water content. At ambient conditions, Nafion’s surface morphology resembles that proposed in the parallel-pore and bicontinuous network models, with the exception that hydrophilic domains are larger at the surface of Nafion compared to the bulk. At hydrated conditions, a network of wormlike, insulating domains extends several micrometers over Nafion’s surface with more conductive, water-rich regions found between these fibrillar features. Neither the surface morphology observed at ambient conditions nor at hydrated conditions persists in dehydrated membranes, which instead exhibit a low coverage of isolated hydrophilic surface domains that, remarkably, are similar in size to such domains at ambient conditions. These observations affirm properties distinct to Nafion’s surface and provide morphological evidence for the low conductivity observed in Nafion at dehydrated conditions and the high conductivity observed at hydrated conditions.



interface with the electrode and catalyst layer.17 Specifically, we examine the surface morphology of Nafion membranes using atomic force microscopy (AFM) phase and current imaging. In the former, phase shifts (i.e., temporal lags or leads) between an oscillating cantilever and the ac signal used to drive it are related to the power dissipated by tip−sample interactions,18,19 which enables mapping of the hydrophilic and hydrophobic domains at the surface of a PEM.20−22 Current imaging is used in this work to assign morphologies when contrast in phase images is dominated by topography and changes in topography rather than chemical composition. Previous studies of Nafion’s morphology as a function of membrane hydration have primarily relied on bulk-averaged measurements from small- and wide-angle X-ray and neutron scattering.23−27 These techniques have greatly contributed to the understanding of Nafion, yet morphological descriptions of aperiodic materials such as Nafion are limited by interpretation of a single scattering peak, despite insights gained from power law dependencies of scattering curves. Excluding maximum entropy reconstructions,28 conclusions drawn from scattering studies involve a priori assumptions regarding the distribution and shape of scattering objects. Morphologies proposed from scattering measurements of Nafion include polymer rods or

INTRODUCTION Proton exchange membrane (PEM) fuel cell performance depends on the electrolyte’s ability to transport protons from the anode to the cathode. In all but anhydrous PEMs,1−4 proton transport in polymer electrolytes is critically linked to membrane hydration.5−9 This dependence has been described on the molecular scale in perfluorosulfonic acid PEMs such as DuPont’s Nafion membrane wherein proton conduction occurs along hydrated sulfonic acid groups through a combination of (1) structural diffusion10 in which protons are passed along a chain of water molecules via the cleavage and formation of hydrogen bonds and (2) vehicular diffusion11 in which individual water molecules shuttle protons as hydrated ions.7−9 In the pursuit of higher performing PEMs, it has been shown that the morphology of ion conducting domains (i.e., their size, occurrence, and connectivity) also greatly affects proton transport.12−15 For example, in membranes with the same chemical composition yet different copolymer architectures, Tsang et al. showed that a cluster morphology of ion domains in graft copolymers increased proton concentration and conductivity at high water contents compared to a lamellar morphology in diblock copolymers.16 Because fuel cell performance is related to both the hydration and morphology of proton conducting domains, the goal of this work is to explore the interplay between membrane water content and the arrangement of proton conducting domains, in particular at the membrane’s surface as it forms a critical © 2013 American Chemical Society

Received: November 20, 2012 Revised: February 6, 2013 Published: March 15, 2013 2267

dx.doi.org/10.1021/ma302399e | Macromolecules 2013, 46, 2267−2274

Macromolecules

Article

Figure 1. (A−C) Topography, (D−F) derivative of topography, and (G−I) phase images (250 nm × 250 nm) of Nafion 212 membranes at dehydrated (3% RH), ambient (49% RH), and hydrated (95% RH) conditions. As described in the text, phase images reflect the distribution of hydrophilic and hydrophobic surface domains. No measurable difference in morphology was observed over the range of ambient relative humidities that existed in our laboratory (30%−75% RH).

ribbons surrounded by ionic groups (micelle)23,24 and, conversely, ionic groups surrounded by the polymer backbone (inverted micelle).27 While these models represent seemingly disparate structures, some of their differences arise from consideration of membranes with different water contents.29,30 While the parallel pore model is well supported by scattering data, this model is limited to descriptions of Nafion’s morphology on length scales less than 20 nm,27 whereas proton conduction occurs over tens of micrometers in PEMs. This underlies the importance of studying PEM morphology on more than one length scale, which is accessible with the phase and current imaging experiments reported here. Specifically, atomic force microscopy allows the properties of a material to be probed at lengths less than 10 nm to greater than 10 μm.

Previous work using AFM to describe the surface morphology of Nafion as a function of membrane hydration has involved limited water contents. James et al. recorded phase images over a 1 μm × 1 μm area of dehydrated Nafion as the relative humidity of the imaging environment increased from 9% to 34% RH.31 The authors observed an increase in the magnitude of phase shifts with increasing relative humidity, yet changes in morphology were not observed in either height or phase images. Our experience indicates that the increase in phase shifts observed by James et al. did not result from changes in properties associated with Nafion, but rather from changes in tip−sample forces associated either with an increase in the thickness of water adsorbed on the membrane’s surface (expected for any material exposed to increasing relative 2268

dx.doi.org/10.1021/ma302399e | Macromolecules 2013, 46, 2267−2274

Macromolecules

Article

Greater-than-bulk sizes of hydrophilic domains indicate a clustering of sulfonic acid domains that are oriented toward the surface, and larger-than-bulk distances between hydrophilic domains correspond to regions where side chains are oriented away from the surface and buried beneath the fluorocarbon backbone. The rind morphology observed at ambient conditions also closely resembles the bicontinuous network predicted statistically and thermodynamically by Elliot et al.28 Our analysis of 2D maximum entropy reconstructions of Nafion shows ion-rich domains in ref 28 cover the same area (20%), yet occur at twice the frequency (3.9 domains per 1000 nm 2) and are approximately half the size (52 nm2) of ion-rich domains observed in phase images. Side-by-side comparison reveals the 2-D reconstructions do not account for adjoined ion-rich domains as observed at the surface of membranes in phase images, explaining differences between the two techniques in the occurrence and size of such domains (Figure S2). Notably, the morphology predicted in 2-D reconstructions more closely resembles that observed with scanned probe microscopy at ambient conditions than at hydrated conditions, despite reconstructions being based on scattering measurements of membranes at water contents of λ = 14−16 mol H2O/mol SO3−. In our work, similar domain size, shape, occurrence, and coverage were observed for membranes equilibrated at relative humidities ranging from 30% to 75% RH, in agreement with Zawodzinski et al., who reported that Nafion’s water content only increased from λ = 2 at 15% RH to λ = 4 at 60% RH.45 Morphological changes may accompany this small increase in water content; however, such changes were not large enough to be detected with AFM. Finally, at the 250 nm × 250 nm scan size in Figure 1, images of Nafion 117 membranesprepared by melt extrusionshow surface morphology indistinguishable from Nafion 212, which are dispersion cast. As phase images can be influenced by more than just the composition of a material, it is important to clarify assignment of contrast in these images. First, interpretation of phase shifts depends on whether tip−sample interactions are attractive (>90°) or repulsive (