There can be no water pollution control...
... until you first know exactly what the water contains. The Technicon®CSM86 is the perfect instrument to tell you just that, because it allows you to simultaneously analyze any six of the following nutrients and parameters: Ammonia, Nitrate, Nitrite, Orthophosphate, Total Inorganic Phosphate, Iron, Silicate, Copper, Chloride, Chromium, Cyanide, Phenol, Sulfate, and Hardness. A CSM 6 unit is 48 inches wide, 32 inches deep, and 75 inches high, which makes it possible for you to monitor water on a ship far out at sea or effluents nearer shore. The CSM 6 works on-site around the clock no matter where you use it. Both the Monitor and the alternative Laboratory Model print out a permanent written record, and all data produced by the CSM 6 can be made available for computer evaluation and statistical analysis. A series of CSM 6 systems can also be used as an early warning system for accidental discharges. The CSM 6 is based upon the continuous flow principle perfected in the Technicon AutoAnalyzer,' basic models of which are available for analysis of hand collected samples. For further information, please write to Departrrrenf§(iy Technicon Industrial Systems ,
«
w .^ÉÊà
Division of Technicon Instrumep^Ca^Srafia Tarrytown, New York 10591. ,:**4τ'*ν 2 Circle No. 143 on Readers' Service Sytt-"-
