Droplet Motion Control on Dynamically ... - ACS Publications

Mar 14, 2017 - Center for Material Design Science, School of Integrated Design Engineering, Keio University, 3-14-1 Hiyoshi, Yokohama 223-8522,. Japan...
0 downloads 0 Views 2MB Size
Subscriber access provided by University of Newcastle, Australia

Letter

Droplet Motion Control on Dynamically Hydrophobic Patterned Surfaces as Multifunctional Liquid Manipulators Mizuki Tenjimbayashi, Masaki Higashi, Taku Yamazaki, Issei Takenaka, Takeshi Matsubayashi, Takeo Moriya, Masatsugu Komine, Ryohei Yoshikawa, Kengo Manabe, and Seimei Shiratori ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.7b01641 • Publication Date (Web): 14 Mar 2017 Downloaded from http://pubs.acs.org on March 17, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 30

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Droplet Motion Control on Dynamically Hydrophobic Patterned Surfaces as Multifunctional Liquid Manipulators Mizuki Tenjimbayashi†, Masaki Higashi†, Taku Yamazaki†, Issei Takenaka†, Takeshi Matsubayashi†, Takeo Moriya†, Masatsugu Komine†, Ryohei Yoshikawa†, Kengo Manabe†, and Seimei Shiratori†* †

Center for Material Design Science, School of Integrated Design Engineering, Keio University,

3-14-1 Hiyoshi, Yokohama, 223-8522, Japan. *E-mail: [email protected] KEYWORDS: liquid manipulation; dynamic wettability; micro reactor; omniphobicity; sol-gel

ACS Paragon Plus Environment

1

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 30

ABSTRACT In this letter, we introduce a novel liquid manipulation strategy to design dynamically hydrophobic and statically hydrophobic/hydrophilic patterned surfaces using an ‘omniphobicity’based technique. The surfaces guide the sliding direction of a droplet in the presence of a statically hydrophilic area where the droplet does not stick on the transport path significantly enhancing the fluidic system transport efficiency. The concept of dynamically hydrophobic and statically hydrophobic/hydrophilic patterned surfaces in conjunction with omniphobic patterning techniques having surface multi-functionality, we believe, has potential not only for fluidic applications but also for future material engineering development.

ACS Paragon Plus Environment

2

Page 3 of 30

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Active surfaces having unique solid-liquid interactions are of both scientific and technological interest. In particular, anti-wetting surfaces that control liquid motion are attracting extensive attention because of their potential in industrial applications as fluidic devices, 1,2 and micro-reactors,3 in addition to fundamental studies in areas such as, liquid transportation,4,5 controlled deposition6 and as patterned devices.7,8 Such liquid manipulation techniques require composite hydrophobic/hydrophilic surfaces, where a patterned hydrophilic, high-adhesion area guides a droplet on a hydrophobic surface. Lai and co-workers reported a superhydrophobic/hydrophilic patterned surface with photocatalytic TiO2 nanotubes.9 Manna and Lynn designed slippery liquid-infused porous surfaces (SLIPS) with a hydrophilic sticky area.10 If applying hydrophobic/hydrophilic patterning surfaces to specific applications, for example, as the surface of a micro-reactor, then care must be taken to ensure that the surface can suitably guide a droplet over the hydrophobic area and to limit the contact of the droplet with the hydrophilic area so as not to decrease the transport efficiency.11 Furthermore, challenges remain to improve liquid manipulative surface properties such as, transparency and mechanical durability, in addition to developing new routes to identify facile fabrication methods.12–14 Recently, dynamically hydrophobic (dewet at low tilting angle: TA) surfaces have been introduced as third-generation anti-wetting surfaces, fabricated by covalently fixing flexible hydrophobic molecular chains on smooth surfaces to prevent the penetration of liquid into the coating.15–17 These surfaces have shown the possibility to design statically hydrophilic (static contact angle: SCA2R) F'( recovers because the droplet contact area becomes homogeneous again. The

graph in Figure 2 indicates that the F'( value can increase as a function of liquid volume and

the maximum F'( value in the range of 0