Earth Abundant Silicon Composites as the ... - ACS Publications

Subscriber access provided by University of Pennsylvania Libraries

Article

Earth Abundant Silicon Composites as the ElectroCatalytic Counter Electrodes for Dye-Sensitized Solar Cells Chun-Ting Li, Yu-Lin Tsai, and Kuo-Chuan Ho ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.5b12423 • Publication Date (Web): 24 Feb 2016 Downloaded from http://pubs.acs.org on March 4, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

1

Earth Abundant Silicon Composites as the Electro-

2

Catalytic Counter Electrodes for Dye-Sensitized

3

Solar Cells

4

Chun-Ting Li1, Yu-Lin Tsai1, and Kuo-Chuan Ho1,2,*

5

1

Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan

6

2

Institute of Polymer Science and Engineering, National Taiwan University, Taipei 10617, Taiwan

7

ABSTRACT: Earth abundant silicon compounds, including Si3N4, SiO2, SiS2, and SiSe2, were

8

introduced as the electro-catalytic materials for the counter electrodes (CE) in dye-sensitized solar

9

cells (DSSCs). Among these silicon-based materials, Si3N4, SiS2, and SiSe2 were applied in DSSCs

10

for

the

first

time.

In

the

presence

of

a

conducting

binder,

11

poly(3,4ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), various silicon-based

12

composites (Si3N4/PEDOT:PSS, SiO2/PEDOT:PSS, SiS2/PEDOT:PSS, and SiSe2/PEDOT:PSS)

13

were successfully coated on the ITO substrates via a simple drop-coating process. In a composite

14

film, silicon-based nanoparticles provided attractive electro-catalytic ability and plenty of electro-

15

catalytic active sites for the triiodine ion (I3-) reduction. PEDOT:PSS not only acted as a good

16

conducting binder for silicon-based nanoparticles, but also provided a continuous polymer matrix

17

to increase the electron transfer pathways. By adjusting the weight percent (1 to 5 wt%) of the

18

silicon-based nanoparticles (Si3N4, SiO2, SiS2, and SiSe2) with respect to the weight of

ACS Paragon Plus Environment

1


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 40

1

PEDOT:PSS, the composite films containing 5 wt% Si3N4 (denoted as Si3N4-5) and 5 wt% SiSe2

2

(denoted as SiSe2-5) both reached excellent electro-catalytic abilities and rendered the good cell

3

efficiencies (η) of 8.2% to their DSSCs. It can be said that both Si3N4-5 and SiSe2-5 are promising

4

electro-catalytic materials to replace the rare and expensive Pt (η=8.5%).

5 6

KEYWORDS: Counter electrode, Dye–sensitized solar cell, Silicon nitride, Silicon oxide, Silicon

7

selenide, Silicon sulfide, Rotating disk electrode

8

9



INTRODUCTION

10

In a dye–sensitized solar cell (DSSC), the counter electrode (CE) functions as the electro-

11

catalytic layer to regenerate the redox species. Efficient CEs often possess good electro-catalytic

12

ability, high conductivity, large effective surface area, and good stability. Generally, platinum (Pt)

13

worked well as the CE. However, several disadvantages of Pt film limited the development of

14

DSSCs: (1) Pt CE was easily poisoned by the redox species; (2) Pt CE often lacked of surface area;

15

(3) Pt CE required an expensive vacuum fabrication process1-4. Therefore, plenty of electro-

16

catalytic materials were explored to replace Pt, including alloy5-7, carbons8-9, conducting

17

polymers10-12, transition metal compounds13, and their composites14-15. Among these materials,

18

transition metal compounds and the corresponding composites have caught a lot of attention,

19

because they owned several advantages, i.e. low-cost, good conductivity, and quite stable.

20

Transition metal compounds, e.g., titanium (Ti)16-18, vanadium (V)19-20, chromium (Cr)13,

21

zirconium (Zr)13, 21, niobium (Nb)17, 22-23, molybdenum (Mo)24-27, hafnium (Hf)28, tantalum (Ta)29-


2

Page 3 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1

30

, tungsten (W)24-26, 31-32, iron (Fe)33-36, cobalt (Co)37-38, nickel (Ni)38-39, tin (Sn)40-42, copper (Cu)43-

2

44

, bismuth (Bi)45 compounds etc., have been reported as the potential CEs in DSSCs. However,

3

some of them are rare on earth and are toxic to environment.

4

Therefore, a group of silicon-based compounds is newly introduced, because silicon is the

5

cheapest, the most abundant, and the most eco-friendly semi-metal on earth. For example, Yun et

6

al. applied bare silicon carbide (SiC) and Pt decorated SiC film as the CEs, and the pertinent

7

DSSCs provided interesting cell efficiencies (η’s) of 3.29% and 7.07%, respectively46. In their

8

work, a DSSC with bare SiC CE showed a high open–circuit voltage (Voc) of 0.71 mV and a good

9

short–circuit current density (Jsc) of 12.56 mA cm-2, but a very low fill factor (FF) of 0.37; this

10

low FF implied the poor contact between the SiC film and the conducting substrate. They further

11

dip-coated Pt nanoparticles onto the SiC film to form a SiC/Pt composite CE, and thus the electro-

12

catalytic ability of the CE and pertinent cell efficiency were both largely improved. Zhong et al.

13

designed a mesoporous titanium carbide/silicon carbide/carbon (TiC/SiC/C) composite CE47. By

14

involving silicon carbide into the titanium carbide crystal, the average particles size and pore size

15

of the composite film were significantly reduced, and the porosity of the composite film was

16

increased. The best TiC/SiC/C composite CE gave its DSSC an η of 5.70%. Wu et al. applied good

17

electro-catalysts of molybdenum silicide (MoSi2) and Pt decorated MoSi2 film as the CEs; the

18

pertinent DSSCs provided the good η’s of 7.77% and 7.94%, respectively48. Since silicide

19

belonged to the interstitial compound, the insertion of the exotic atom (Si) bought many defects to

20

the MoSi2 crystalline, as compared to the pure bulk metal (Mo). Accordingly, the inserted defects

21

in MoSi2 were considered as the electro-active sites. Song et al. combined pure Si nanoparticles

22

and silicon dioxide (SiO2) with poly(3,4ethylenedioxythiophene):poly(styrenesulfonate)

23

(PEDOT:PSS); the cells with the CEs of Si/PEDOT:PSS and SiO2/PEDOT:PSS reached the η’s of


3


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 40

1

5.70% and 5.66%, respectively49-50. Besides, the composite film of SiO2/PEDOT:PSS was quite

2

transparent, and it may be suitable for fabricating bifacial DSSCs. Tsai et al. introduced SiC

3

nanoparticles/PEDOT:PSS composite film, which rendered its DSSC a good η of 7.25%, because

4

SiC nanoparticles/PEDOT:PSS composite film exhibited good intrinsic heterogeneous rate

5

constant and large effective electro-catalytic surface area51.

6

To summarize the literatures mentioned above, even though plenty of the transition metal

7

compounds were studied as the replacements of the traditional Pt CE, several issues still existed,

8

e.g., (1) rare heavy metals were often included, (2) toxic precursors were inevitable, and (3) high

9

costs were needed for the fabrication process of transition metal compounds. Therefore, three kinds

10

of silicon-based compounds (SiC, SiO2, and MoSi2) were used as the CEs recently due to the fact

11

that silicon is the cheapest, non-toxic, and the most earth abundant semi-metal. Up to date, the

12

DSSCs with silicon-based CEs only reached the cell efficiencies ~ 7.8%46-51. In order to explore

13

more efficient silicon-based electro-catalysts, we systematically investigated four kinds of the

14

silicon compounds (Si3N4, SiO2, SiS2, and SiSe2) to form different composite films as the electro-

15

catalytic CEs in DSSCs. Among them, Si3N4, SiS2, and SiSe2 were applied in DSSCs for the first

16

time. When Si3N4, SiO2, SiS2, and SiSe2 nanoparticles were combined with the conducting binder,

17

namely, PEDOT:PSS, four types of the composite films, including Si3N4/PEDOT:PSS,

18

SiO2/PEDOT:PSS, SiS2/PEDOT:PSS, and SiSe2/PEDOT:PSS, respectively, were prepared via a

19

simple and low-cost drop-coating method. Here, the earth abundant silicon-based nanoparticles

20

played an important role in catalyzing the I3- reduction (Scheme 1), while PEDOT:PSS functioned

21

as a dispersant and a conductive binder simultaneously. Therefore, PEDOT:PSS can facilitate the

22

adhesion between the composite film and the ITO substrate, enhance the linkage among the added

23

nanoparticles (i.e. Si3N4, SiS2, SiSe2), and prevent the aggregation of the added nanoparticles52-55.


4

Page 5 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1

This work firstly introduced Si3N4, SiS2, and SiSe2 as the electro-catalysts for I3– reduction,

2

systematically compared their performance as the CEs in DSSCs, and reached the highest η record

3

up to 8.20% among the DSSCs with silicon-based CEs. Last but not the least, the earth abundant

4

Si3N4 (8.18±0.02%) and SiSe2 (8.20±0.03%) can be considered as the promising substitutions for

5

Pt (8.50±0.01%). Besides, the simple, low-cost, low temperature, and non-vacuum drop-coating

6

process used in this work was compatible for variable substrates and large-scale production, which

7

benefited the future industrialization of DSSCs.

8 9



EXPERIMENTAL DETAILS

10

Preparation of the electro-catalytic films as the counter electrodes. A 30 nm–thick Pt film

11

was obtained on a tin–doped indium oxide conducting glasses (ITO, UR–ITO007–0.7mm, 5 Ω sq.–

12

1

13

ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) film was fabricated on ITO by a

14

simple drop–coating technique using 50 μL PEDOT:PSS mixture (ethanol/PEDOT:PSS/DMSO =

15

20/19/1 by volume); the PEDOT:PSS aqueous precursor of PH1000 was obtained from Heraeus.

16

Four earth abundant silicon compounds, including silicon nitride (Si3N4, SiO2. Accordingly, the intrinsic electro-catalytic abilities for these four

8

kinds of silicon-based compounds may follow the same order. The DSSCs with Si3N4-5 and SiSe2-

9

5 CEs have the comparable cell efficiency (8.18% and 8.20%, respectively) to that of the cell with

10

Pt CE (8.50%); it is notable that the Si3N4-5 and SiSe2-5 electro-catalytic films possess the great

11

potential to replace Pt.

12

The incident photon–to–current conversion efficiency (IPCE) curves of the DSSCs with various

13

electro-catalytic CEs were measured at the short-circuit condition of each cell in the wavelength

14

range of 400-800 nm, as shown in Figure 2b. Except for the cell with PEDOT:PSS CE, other

15

DSSCs (including the cells with Pt, Si3N4-5, SiO2-1, SiS2-5, and SiSe2-5 CEs) gave good IPCE

16

values around 80~90% from 400 to 600 nm, indicating that those CEs provided fast and sufficient

17

electrolyte regeneration. In the case of PEDOT:PSS-based DSSC, its IPCE values were obvious

18

lower than the values of other cells; it may be due to that PEDOT:PSS film provided weak electro-

19

catalytic ability for I3- and thereby limited the IPCE of the pertinent cell. Besides, each IPCE curve

20

was further integrated to get the corresponding short-circuit current density (Jsc-IPCE) value. As

21

summarized in Table 1, the Jsc-IPCE values agreed well with the Jsc values obtained from the J–V

22

curves. It is notable that the best IPCE value (89%) and Jsc-IPCE value (16.94 mA cm-2) are obtained

23

for the DSSC with SiSe2-5 CE; these values are even higher than those of the DSSC with Pt CE.


10

Page 11 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1 2

Cyclic voltammetry. Cyclic voltammetry (CV) was applied to investigate the redox kinetics of

3

iodide/triiodide (I–/I3–) on the surface of an electro-catalytic film. An electrolyte, containing 10.0

4

mM LiI, 1.0 mM I2, and 0.1 M lithium perchlorate (LiClO4) in ACN, was used for CV analysis;

5

the pertinent analytic details for CV analysis were described in Supporting Information. In a DSSC,

6

triiodide ions (I3–) are largely generated, after the iodide ions (I–) trigger the dye regeneration. The

7

just-in-time consumption of I3– ions plays a very important role to prevent the recombination and

8

the pertinent energy loss of a cell. As a CE in a DSSC, the electro-catalytic film is specifically

9

used to facilitate the reduction of I3- at the CEs/electrolyte interface as shown in Equation (1)3.

10

I3- +2e - →3I -

(1)

11

Generally, the cathodic peak current density (Jpc) of a CV curve indicates the overall electro-

12

catalytic ability of a film for I3– reduction, and the larger value of Jpc reflects the better overall

13

electro-catalytic ability. CV curves of various electro-catalytic films, i.e., Pt, PEDOT:PSS, Si3N4-

14

5, SiO2-1, SiS2-5, and SiSe2-5, were shown in Figure 3; the corresponding Jpc values were 1.39,

15

0.40, 1.30, 0.75, 0.99, and 1.38 mA cm-2, respectively (Table 2). Obviously, all silicon-based

16

composite films provided higher Jpc values than that of PEDOT:PSS film. It can be confirmed that

17

the electro-catalytic abilities of those silicon-based composite films were mainly determined by

18

these silicon-based nanoparticles, i.e., Si3N4, SiO2-1, SiS2, and SiSe2, because those silicon-based

19

nanoparticles rendered the good intrinsic electro-catalytic capabilities and large surface areas to

20

their composite films (Scheme 1). Besides, the Jpc values of the silicon-based composite films

21

showed a tendency of SiSe2-5 ≈ Si3N4-5 > SiS2-5 > SiO2-1, which agreed well with the tendencies

22

of both Jsc and η values of the pertinent DSSCs. Among all composite films, SiSe2-5 and Si3N4-5

23

films gave the highest Jpc values of 1.38 and 1.30 mA cm-2; those high Jpc values were comparable


11


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 40

1

with the Jpc value of Pt (1.39 mA cm-2). It was concluded that the SiSe2-5 and Si3N4-5 films have

2

the comparable electro-catalytic ability as compared to Pt.

3

On the other hand, the cathodic overpotential (ηc) and the peak-to-peak separation potential (ΔEp)

4

of a CV curve are both inversely proportional to the intrinsic redox capability of a film. A smaller

5

ηc of a film means that a lower cathodic overpotential is required to trigger I3– reduction, while a

6

smaller ΔEp of a film indicates a lower overall potential to trigger I–/I3– redox reaction. Therefore,

7

the smaller ηc and ΔEp indicate the better intrinsic redox capability of a film toward I–/I3– redox

8

reaction. As summarized in Table 2, the ηc values of Pt, PEDOT:PSS, Si3N4-5, SiO2-1, SiS2-5,

9

and SiSe2-5 were calculated to be 0.20, 0.33, 0.26, 0.30, 0.27, and 0.26 V, respectively. The ΔEp

10

values of Pt, PEDOT:PSS, Si3N4-5, SiO2-1, SiS2-5, and SiSe2-5 were calculated to be 0.40, 0.66,

11

0.53, 0.59, 0.54, and 0.52 V, respectively. Since all silicon-based composite films exhibited

12

smaller ηc and ΔEp values than those of the PEDOT:PSS film; thus, it was once again verified that

13

the electro-catalytic abilities of these silicon-based composite films were attributed to the silicon-

14

based nanoparticles. The ηc and ΔEp values showed the same tendency of Pt > SiSe2-5 = Si3N4-5

15

< SiS2-5 < SiO2-1 < PEDOT:PSS; this inferred that SiSe2-5 and Si3N4-5 films exhibited the

16

comparable intrinsic redox capability with that of Pt.

17 18

Rotating disk electrode. Rotating disk electrode (RDE) technique was used to further

19

investigate the electro-catalytic abilities of the films in detail. An electrolyte, containing 1.0 mM

20

tetrabutylammonium triiodide (TBAI3) and 0.1 M LiClO4 in ACN, was used for RDE analysis. In

21

the case of PEDOT:PSS, Si3N4-5, SiO2-1, SiS2-5, and SiSe2-5, these electro-catalytic films were

22

individually drop-coated on a glassy carbon electrode (GCE, with an active area of 0.20 cm2) by


12

Page 13 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1

using 10 μL of their precursor slurries mentioned previously in “EXPERIMENTAL DETAILS.”

2

In the case of Pt, another electrode with Pt foil as the disk material (Pt–RDE, with an active area

3

of 0.20 cm2) was used for measuring the parameters related to Pt electrode. Thus, the Pt-RDE and

4

various GCEs were used as the working electrodes for RDE analysis; other pertinent analytic

5

details for RDE analysis are described in Supporting Information. From the CV analysis mentioned

6

above, the Jpc value represents the overall electro-catalytic ability, which can be considered as the

7

combination of two key parameters: the intrinsic heterogeneous rate constant (k0) and the effective

8

catalytic surface area (Ae). Therefore, RDE analysis aims to distinguish k0 and Ae simultaneously.

9

For an electro-catalytic film, seven linear sweep voltammetry (LSV) curves (not shown) were

10

measured under different rotating speeds (50, 100, 200, 400, 600, 800, and 1000 rpm); accordingly,

11

seven values of the reciprocal currents (i-1) were obtained from the LSV curves at the formal

12

potential (E0’) based on an electro-catalytic film. The E0’ for an electro-catalytic film is obtained

13

from its previous CV curve. Thus, plots of reciprocal current (i-1) vs. reciprocal of rotating rate

14

root (ω-0.5) for various electro-catalytic films, including Pt, PEDOT:PSS, Si3N4-5, SiO2-1, SiS2-5,

15

and SiSe2-5, were shown in Figure 4. These plots were used for calculating the values of k0 and

16

Ae by using a simplified Koutecký–Levich equation, as shown as Equation (2) below57.

17

1

18

where i is the specific current obtained from the LSV curve at the formal potential (E0’), n is the

19

number of electrons transferred, F is Faraday constant, C is the concentration of I3- ions, D is the

20

apparent diffusion coefficient of I3-, ν is the kinematic viscosity of electrolyte, and ω is the angular

21

velocity converted from the rotating speed.

i

1

1

e

0.62nFAe D2 /3 υ-1 /6 ω1/2 C

= nFA 𝑘 0 C +

(2)


13


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 40

1

In Figure 4, the intercept and slope of a fitting line were respectively used to find k0 and Ae

2

values of an electro-catalytic film. As summarized in Table 2, the Pt film showed the highest k0

3

of 6.70×10-3 cm s-1 and Ae of 0.20 cm2; it indicated the excellent intrinsic electro-catalytic

4

capability of Pt and the limited effective electro-catalytic surface area of the flat Pt film,

5

respectively. PEDOT:PSS film gave the lowest k0 of 1.98×10-3 cm s-1 and comparable Ae of 0.23

6

cm2 to that of Pt; it revealed that PEDOT:PSS has the weakest electro-catalytic ability than the

7

other films. All silicon-based composite films provide both higher k0 and Ae values than those of

8

PEDOT:PSS film. Therefore, it was confirmed that the silicon-based nanoparticles, i.e., Si3N4,

9

SiO2, SiS2, and SiSe2, played the main role to contribute not only the good intrinsic heterogeneous

10

rate constants but also the large effective surface areas to their composite films. Among all silicon-

11

based composite films, their k0 values show a tendency of SiSe2-5 ≈ Si3N4-5 > SiS2-5 > SiO2-1,

12

which is consistent with the tendency of the ηc and ΔEp values obtained from CV and the η values

13

of the pertinent DSSCs. Besides, all silicon-based composite films showed comparable Ae values

14

about ≈ 0.7 cm2. Since all silicon-based composite films were coated on the same glassy carbon

15

electrode (GCE) electrode with a fixed geometric area of 0.20 cm2, it can be said that all the

16

composite films were able to provide a rough and porous surface to achieve higher effective

17

surface areas. The Ae values of the composite films were all with 3~3.5 times higher than those of

18

Pt and PEDOT:PSS films, indicating those composites provided sufficient surface areas for I3-

19

reduction. As compared to the traditional Pt film, the best two films, namely SiSe2-5 and Si3N4-5,

20

possessed the lower k0 values and the higher Ae values (~3.5 times to that of Pt). Therefore, the

21

overall electro-catalytic abilities of SiSe2-5 and Si3N4-5 films were comparable to Pt film; this

22

RDE showed highly consistency with the above-mentioned CV results.

23


14

Page 15 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1

Tafel polarization curves. Tafel polarization technique aimed to explore the practical electro-

2

catalytic abilities of various films for I3– reduction in an electrolyte containing high I–/I3–

3

concentration, i.e., 0.1 M LiI, 0.6 M DMPII, 0.05 M I2, and 0.5 M tBP in ACN/MPN (the

4

electrolyte used for the DSSCs), compared to the CV and RDE data collected using the electrolytes

5

with low I–/I3– concentrations. For an electro-catalytic film, a linear sweep voltammetry (LSV)

6

curve was obtained at a low scan rate of 50 mV s-1 by using a symmetric cell composed of the

7

same film on the both sides; and the pertinent Tafel polarization curve was presented as a

8

logarithmic current density–voltage (Log J–V) curve. Generally, a Tafel curve can be divided into

9

three zones: (1) the polarization zone (|V| < 120 mV), (2) the Tafel zone (120 mV< |V| < 400 mV),

10

and (3) the diffusion zone (|V| > 400 mV)57. In the Tafel zone, the exchange current density (J0)

11

of an electro-catalytic film was obtained by extrapolating the anodic and cathodic curves and

12

reading the cross point at 0 V. The higher value of J0 indicates the better electro-catalytic ability

13

of the film. According to the Tafel polarization curves shown in Figure 5, the J0 values for various

14

electro-catalytic films, including Pt, PEDOT:PSS, Si3N4-5, SiO2-1, SiS2-5, and SiSe2-5, were

15

obtained and summarized in Table 2. It can be observed that the J0 values of those films are

16

perfectly consistent with their Jpc values (Pt > SiSe2-5 > Si3N4-5 > SiS2-5 > SiO2-1 > PEDOT:PSS).

17

Therefore, the electro-catalytic abilities of the films were thus validated not only by CV and RDE

18

analysis (with lower I–/I3– concentration) but also by Tafel curve (with higher I–/I3– concentration).

19

As compared to other silicon-based films, the best two films, i.e., SiSe2-5 and Si3N4-5, possessed

20

the highest J0 values of 6.28 mA cm-2 and 5.75 mA cm-2, respectively. Those high J0 values are

21

close to that of Pt, implying their competitive electro-catalytic abilities to Pt.

22 23

Moreover, the J0 value of a film is used to calculate the charge transfer resistance (Rct-Tafel) corresponding to the electro-catalytic film/electrolyte interface, via Equation (3)3, 57.


15


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

RT nFRct -Tafel

Page 16 of 40

1

J0 

2

where R is the ideal gas constant, T is the absolute temperature, F is Faraday constant, and n is the

3

number of electrons transferred for I3– reduction. In general, the smaller Rct-Tafel value refers to the

4

larger amount of electrons transferring through the electro-catalytic film/electrolyte interface, and

5

thereby implies the faster electron transfer capability of the film. In Table 2, all silicon-based

6

composite films provided much lower Rct-Tafel values than that of PEDOT:PSS film, because those

7

silicon-based nanoparticles exhibited higher intrinsic heterogeneous rate constants and larger

8

effective catalytic surface areas than those of PEDOT:PSS. Therefore, the much higher values of

9

Jsc and FF were both obtained from the DSSCs with silicon-based composite CEs. As compared

10

to other silicon-based films, the best two films, i.e., SiSe2-5 and Si3N4-5, possessed the lowest Rct-

11

Tafel

12

that of Pt film (1.75 Ω cm2); therefore, the SiSe2-5 and Si3N4-5 composite films may have the rapid

13

I3– reduction rate comparable to Pt.

(3)

values of 2.05 and 2.23 Ω cm2, respectively. It is notable that those Rct-Tafel values are close to

14 15

Electrochemical impedance spectroscopy. Electrochemical impedance spectroscopy (EIS)

16

was used for precise examination of the interfacial resistances, namely series resistance (Rs) and

17

charge transfer resistance (Rct-EIS), in a symmetric cell composed of one kind of electro-catalytic

18

film on both sides. An electrolyte, containing 0.1 M LiI, 0.6 M DMPII, 0.05 M I2, and 0.5 M tBP

19

in ACN/MPN, was used for this symmetric type EIS analysis; the pertinent analytic details were

20

described in Supporting Information. As shown in Figure 6, this type of EIS spectrum usually

21

shows two semicircles in the frequency range of 10 mHz to 65 kHz2-4. According to the equivalent

22

circuit2-4 shown in the inset of Figure 6, the series resistance (Rs) value equals to onset point of


16

Page 17 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1

the first semicircle (left-hand side) in the high frequency region, the lower Rs reflects the better

2

ohmic contact between the substrate and an electro-catalytic film. The charge transfer resistance

3

(Rct-EIS) is obtained from the radius of the first semicircle in the middle frequency region; the lower

4

Rct-EIS refers to the larger amount of charge pass through the electro-catalytic film/electrolyte

5

interface. The second semicircle (right-hand side) is owing to the Warburg diffusion resistance of

6

the electrolyte, measured in the low frequency region. As summarized in Table 2, the Rs values of

7

PEDOT:PSS and all silicon-based composite films were about 16 Ω cm2, implying they all had

8

good adhesion to FTO substrates. Pt film gave slightly less Rs value (14.25 Ω cm2) than the others,

9

because the ultra-thin Pt had an excellent adhesion to FTO substrate. On the other hand, the Rct-EIS

10

values of the films showed a tendency of Pt < SiSe2-5 < Si3N4-5 < SiS2-5 < SiO2-1 < PEDOT:PSS,

11

which was consistent with the tendency of Rct-Tafel values obtained from Tafel polarization curves.

12

It is notable that all the Rct values (Rct-Tafel or Rct-EIS), irrespective of their measurement technique,

13

show a perfect consistent with the results of Jpc and J0 values. The Rct-EIS value (3.21 Ω cm2) of

14

SiSe2-5 composite is comparable to that of Pt (2.98 Ω cm2).

15

In brief, according to CV, RDE, Tafel, and EIS analyses, the electro-catalytic abilities of the

16

films follow the order of Pt > SiSe2-5 > Si3N4-5 > SiS2-5 > SiO2-1 > PEDOT:PSS. Among all

17

electro-catalytic films, SiSe2-5 exhibited the best electro-catalytic ability for I3– reduction, and

18

showed a great potential to replace Pt due to its low cost and earth abundance. Besides, it can be

19

deduced from this study that the electro-catalytic abilities of these four kinds of silicon-based

20

materials followed the same order of SiSe2-5 > Si3N4-5 > SiS2-5 > SiO2-1. In accordance with the

21

literatures, the electro-catalytic ability of a transition metal compound was reported to be

22

influenced by many complicated factors, including the band structure30, 58-59, the distribution of the

23

density of state30, 58-59, the surface energy60, the adsorption energy21, 61-64, etc.; the information of


17


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 40

1

these factors were often obtained via the density functional theory (DFT) calculation. Until now,

2

there are no literatures that provided these information to simultaneously compare the performance

3

of transition metal nitride (TMN), oxide (TMO), sulfide (TMS), and selenide (TMSe). Thus, at

4

this stage, it is extremely hard to speculate a certain trend of the intrinsic electro-catalytic ability

5

for all the transition metal compounds. Moreover, the synthetic approaches for transition metal

6

compounds were reported to dramatically influence their crystal phases22,

7

geometries22, 29-30, 32, 66-67, inner defects30, 36, 66, and thereby their intrinsic electro-catalytic abilities.

8

Since TMNs, TMO, TMS, and TMSe have not been fully investigated, the comparisons of their

9

electro-catalytic abilities would be based on the highest records of their DSSCs’ cell efficiencies.

10

In the case of comparing TMO and TMN, many TMOs (e.g., TiO213, V2O313, Cr2O313, ZrO213,

11

MoO213, 68, and NiO69-71) exhibited poorer intrinsic electro-catalytic abilities than the pertinent

12

TMNs, while some special TMOs (e.g., NbO222, Nb2O522, TaO29, Ta2O529, TaOx30, WO232, WO332,

13

WO2.7266, W18O4967, Fe2O364, Fe3O433) performed better due to the fact that they possessed multiple

14

coordination geometries. Since pure SiO2 used in this study rarely have other coordination

15

geometry, the poorer intrinsic electro-catalytic ability of SiO2-1 than that of Si3N4-5 seems

16

reasonable. In the case of comparing TMO, TMS, and TMSe, their intrinsic electro-catalytic

17

abilities often showed a tendency of TMSe > TMS > TMO, e.g., MoSe272 > MoS226 > MoO213, 68,

18

FeSe235 > FeS273 > Fe2O364, CoSe38,

19

Accordingly, the same tendency (SiSe2-5 > SiS2-5 > SiO2-1) toward the intrinsic electro-catalytic

20

ability was observed in this study; this was judged by the values of k0 obtained from RDE and the

21

values of ηc and ΔEp obtained from CV.

74

40, 65

, coordination

> CoS37 > Co3O437, and NiSe38-39> NiS75 > NiO70-71.

22 23



CONCLUSIONS


18

Page 19 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1

Silicon-based composites, including Si3N4/PEDOT:PSS, SiO2/PEDOT:PSS, SiS2/PEDOT:PSS,

2

and SiSe2/PEDOT:PSS, were systematically investigated as the electro-catalytic CE for DSSCs;

3

especially for Si3N4, SiS2, and SiSe2, they were introduced in DSSC field for the first time. After

4

adjusting the amounts of the silicon-based nanoparticles in their composite films individually, the

5

DSSCs with Si3N4-5, SiO2-1, SiS2-5, and SiSe2-5 CEs reached cell efficiencies of 8.18%, 5.98%,

6

7.02% and 8.20%, respectively. It is notable that the Si3N4-5 and SiSe2-5 render good electro-

7

catalytic abilities to their DSSC, and thereby their cell efficiencies are comparable to that of the

8

cell with Pt CE (8.50%). From RDE analysis, all silicon-based composites films provided large

9

effective catalytic surface area (Ae), which were about 3~3.5 times higher than those of Pt and

10

PEDOT:PSS films; they also provided good intrinsic heterogeneous rate constants (k0), which were

11

about 1.5~3 times higher than that of PEDOT:PSS. Therefore, the Jpc values obtained from CV

12

analysis and the J0 values obtained from Tafel analysis demonstrated that the overall electro-

13

catalytic abilities of the films showed a tendency of SiSe2-5 > Si3N4-5 > SiS2-5 > SiO2-1>

14

PEDOT:PSS. We concluded that the electro-catalytic abilities of the composite films were mainly

15

supplied by the silicon-based nanoparticles (i.e., Si3N4, SiO2, SiS2, and SiSe2). From Tafel and EIS

16

analyses, the charge transfer capabilities of the silicon-based composites films were much smaller

17

than that of PEDOT:PSS; it indicates: (1) silicon-based nanoparticles promoted the I3- reduction

18

through the CE/electrolyte interface due to their enhanced k0, and (2) the PEDOT:PSS matrix

19

provided a good conductive matrix to facilitate the charge transfer between the electro-catalytic

20

film and the FTO substrate (Scheme 1). Finally, Si3N4-5 and SiSe2-5 CEs exhibited the lower k0

21

values and the higher Ae values (~3.5 times) than those of Pt, and thereby gave the comparable

22

DSSC efficiencies (8.18% and 8.20%, respectively) to that of the cell with Pt CE (8.50%). Thus,

23

Si3N4 and SiSe2 electro-catalytic materials can be both considered to have a great potential to


19


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 20 of 40

1

replace the traditional expensive Pt CE for DSSCs. Most of all, the earth abundant Si3N4-5 and

2

SiSe2-5 benefit the large-scale and low-cost production of DSSCs.

3 4



5

Supporting Information.

6

The detailed information of all the materials/chemicals used in this study and the fabrication details

7

of the TiO2 photoanode were given. This material is available free of charge via the Internet at

8

http://pubs.acs.org.”

ASSOCIATED CONTENT

9 10



11

Corresponding Author

12

*E–mail: [email protected] (Kuo-Chuan Ho)

AUTHOR INFORMATION

13 14



15

This work was supported by the Ministry of Science and Technology (MOST) of Taiwan, under

16

grant numbers 102-2221-E-002-186-MY3 and 103-2119-M-007-012.

ACKNOWLEDGMENT

17 18



19

1.

20

REFERENCES Wu, M.; Ma, T., Recent Progress of Counter Electrode Catalysts in Dye-Sensitized Solar Cells. J. Phys. Chem. C 2014, 118, 16727-16742.


20

Page 21 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1


2.

2 3

High Efficiency. Adv. mater. 2014, 26, 6210-6237. 3.

4 5

Yun, S.; Hagfeldt, A.; Ma, T., Pt-Free Counter Electrode for Dye-Sensitized Solar Cells with

Wu, M.; Ma, T., Platinum-Free Catalysts as Counter Electrodes in Dye-Sensitized Solar Cells. ChemSusChem 2012, 5, 1343-1357.

4.

Lan, J. L.; Wan, C. C.; Wei, T. C.; Hsu, W. C.; Chang, Y. H., Durability Test of PVP-Capped

6

Pt Nanoclusters Counter Electrode for Highly Efficiency Dye-Sensitized Solar Cell. Prog.

7

Photovoltaics 2012, 20, 44-50.

8

5.

9 10

Tang, Z.; Wu, J.; Zheng, M.; Huo, J.; Lan, Z., A Microporous Platinum Counter Electrode Used in Dye-Sensitized Solar Cells. Nano Energy 2013, 2, 622-627.

6.

Dong, H.; Wu, Z.; Gao, Y.; El-Shafei, A.; Jiao, B.; Dai, Y.; Hou, X., A Nanostructure-Based

11

Counter Electrode for Dye-Sensitized Solar Cells by Assembly of Silver Nanoparticles. Org.

12

Electron. 2014, 15, 1641-1649.

13

7.

14 15

Electrodes for Efficient Dye-Sensitized Solar Cells. J. Power Sources 2014, 260, 180-185. 8.

16 17

He, B.; Meng, X.; Tang, Q.; Li, P.; Yuan, S.; Yang, P., Low-Cost CoPt Alloy Counter

Poudel, P.; Qiao, Q., Carbon Nanostructure Counter Electrodes for Low Cost and Stable Dye-Sensitized Solar Cells. Nano Energy 2014, 4, 157-175.

9.

Ju, M. J.; Jeon, I. Y.; Kim, J. C.; Lim, K.; Choi, H. J.; Jung, S. M.; Choi, I. T.; Eom, Y. K.;

18

Kwon, Y. J.; Ko, J.; Lee, J. J.; Kim, H. K.; Baek, J. B., Graphene Nanoplatelets Doped with

19

N at Its Edges as Metal-Free Cathodes for Organic Dye-Sensitized Solar Cells. Adv. mater.

20

2014, 26, 3055-3062.

21

10.

Idígoras, J.; Guillén, E.; Ramos, F. J.; Anta, J. A.; Nazeeruddin, M. K.; Ahmad, S., Highly

22

Efficient Flexible Cathodes for Dye Sensitized Solar Cells to Complement Pt@TCO

23

Coatings. J. Mater. Chem. A 2014, 2, 3175-3181.


21


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

11.

Page 22 of 40

Lu, S.; Zhang, X.; Feng, T.; Han, R.; Liu, D.; He, T., Preparation of Polypyrrole Thin Film

2

Counter Electrode with Pre-Stored Iodine and Resultant Influence on Its Performance. J.

3

Power Sources 2015, 274, 1076-1084.

4

12.

Zhang, T. L.; Chen, H. Y.; Su, C. Y.; Kuang, D. B., A Novel TCO- and Pt-Free Counter

5

Electrode for High Efficiency Dye-Sensitized Solar Cells. J. Mater. Chem. A 2013, 1, 1724-

6

1730.

7

13.

Wu, M.; Lin, X.; Wang, Y.; Wang, L.; Guo, W.; Qi, D.; Peng, X.; Hagfeldt, A.; Grätzel, M.;

8

Ma, T., Economical Pt-Free Catalysts for Counter Electrodes of Dye-Sensitized Solar Cells.

9

J. Am. Chem. Soc. 2012, 134, 3419-3428.

10

14.

He, B.; Tang, Q.; Wang, M.; Chen, H.; Yuan, S., Robust Polyaniline-Graphene Complex

11

Counter Electrodes for Efficient Dye-Sensitized Solar Cells. ACS Appl. Mater. Interfaces

12

2014, 6, 8230-8236.

13

15.

Xiao, Y.; Wang, W. Y.; Chou, S. W.; Lin, T. W.; Lin, J. Y., In Situ Electropolymerization

14

of Polyaniline/Cobalt Sulfide Decorated Carbon Nanotube Composite Catalyst Toward

15

Triiodide Reduction in Dye-Sensitized Solar Cells. J. Power Sources 2014, 266, 448-455.

16

16.

17 18

Electrodes for Dye-Sensitized Solar Cells. Chem. Commun. 2009, 6720-6722. 17.

19 20

Jiang, Q. W.; Li, G. R.; Gao, X. P., Highly Ordered TiN Nanotube Arrays as Counter

Wang, L.; Diau, E. W.; Wu, M.; Lu, H. P.; Ma, T., Highly Efficient Catalysts for Co(II/III) Redox Couples in Dye-Sensitized Solar Cells. Chem. Commun. 2012, 48, 2600-2602.

18.

Li, C. T.; Lee, C. P.; Li, Y. Y.; Yeh, M. H.; Ho, K. C., A Composite Film of

21

TiS2/PEDOT:PSS as the Electrocatalyst for the Counter Electrode in Dye-Sensitized Solar

22

Cells. J. Mater. Chem. A 2013, 1, 14888-14896.


22

Page 23 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1


19.

Wang, Y.; Wu, M.; Lin, X.; Shi, Z.; Hagfeldt, A.; Ma, T., Several Highly Efficient Catalysts

2

for Pt-Free and FTO-Free Counter Electrodes of Dye-Sensitized Solar Cells. J. Mater. Chem.

3

2012, 22, 4009-4014.

4

20.

Wang, Y.; Zhao, C.; Wu, M.; Liu, W.; Ma, T., Highly Efficient and Low Cost Pt-Based

5

Binary and Ternary Composite Catalysts as Counter Electrode for Dye-Sensitized Solar

6

Cells. Electrochim. Acta 2013, 105, 671-676.

7

21.

Wei, W.; Wang, H.; Hu, Y. H., Unusual Particle-Size-Induced Promoter-To-Poison

8

Transition of ZrN in Counter Electrodes for Dye-Sensitized Solar Cells. J. Mater. Chem. A

9

2013, 1, 14350-14357.

10

22.

Lin, X.; Wu, M.; Wang, Y.; Hagfeldt, A.; Ma, T., Novel Counter Electrode Catalysts of

11

Niobium Oxides Supersede Pt for Dye-Sensitized Solar Cells. Chem. Commun. 2011, 47,

12

11489-11491.

13

23.

Guo, J.; Shi, Y.; Zhu, C.; Wang, L.; Wang, N.; Ma, T., Cost-Effective and Morphology-

14

Controllable Niobium Diselenides for Highly Efficient Counter Electrodes of Dye-

15

Sensitized Solar Cells. J. Mater. Chem. A 2013, 1, 11874-11879.

16

24.

Wu, M.; Lin, X.; Hagfeldt, A.; Ma, T., Low-Cost Molybdenum Carbide and Tungsten

17

Carbide Counter Electrodes for Dye-Sensitized Solar Cells. Angew. Chem. Int. Ed. 2011, 50,

18

3520-3524.

19

25.

Wu, M.; Zhang, Q.; Xiao, J.; Ma, C.; Lin, X.; Miao, C.; He, Y.; Gao, Y.; Hagfeldt, A.; Ma,

20

T., Two Flexible Counter Electrodes Based on Molybdenum and Tungsten Nitrides for Dye-

21

Sensitized Solar Cells. J. Mater. Chem. 2011, 21, 10761-10766.


23


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

26.

Page 24 of 40

Wu, M.; Wang, Y.; Lin, X.; Yu, N.; Wang, L.; Hagfeldt, A.; Ma, T., Economical and

2

Effective Sulfide Catalysts for Dye-Sensitized Solar Cells as Counter Electrodes. Phys.

3

Chem. Chem. Phys. 2011, 13, 19298-19301.

4

27.

Zheng, X.; Guo, J.; Shi, Y.; Xiong, F.; Zhang, W. H.; Ma, T.; Li, C., Low-Cost and High-

5

Performance CoMoS4 and NiMoS4 Counter Electrodes for Dye-Sensitized Solar Cells. Chem.

6

Commun. 2013, 49, 9645-9647.

7

28.

Yun, S.; Zhou, H.; Wang, L.; Zhang, H.; Ma, T., Economical Hafnium Oxygen Nitride

8

Binary/Ternary Nanocomposite Counter Electrode Catalysts for High-Efficiency Dye-

9

Sensitized Solar Cells. J. Mater. Chem. A 2013, 1, 1341-1348.

10

29.

11 12

Yun, S.; Wang, L.; Guo, W.; Ma, T., Non-Pt Counter Electrode Catalysts Using Tantalum Oxide for Low-Cost Dye-Sensitized Solar Cells. Electrochem. Commun. 2012, 24, 69-73.

30.

Yun, S.; Wu, M.; Wang, Y.; Shi, J.; Lin, X.; Hagfeldt, A.; Ma, T., Pt-Like Behavior of High-

13

Performance Counter Electrodes Prepared from Binary Tantalum Compounds Showing

14

High Electrocatalytic Activity for Dye-Sensitized Solar Cells. ChemSusChem 2013, 6, 411-

15

416.

16

31.

Jang, J. S.; Ham, D. J.; Ramasamy, E.; Lee, J.; Lee, J. S., Platinum-Free Tungsten Carbides

17

as an Efficient Counter Electrode for Dye Sensitized Solar Cells. Chem. Commun. 2010, 46,

18

8600-8602.

19

32.

Wu, M.; Mu, L.; Wang, Y.; Lin, Y.; Guo, H.; Ma, T., One-Step Synthesis of Nano-Scaled

20

Tungsten Oxides and Carbides for Dye-Sensitized Solar Cells as Counter Electrode Catalysts.

21

J. Mater. Chem. A 2013, 1, 7519-7524.


24

Page 25 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1


33.

Wang, L.; Shi, Y.; Wang, Y.; Zhang, H.; Zhou, H.; Wei, Y.; Tao, S.; Ma, T., Composite

2

Catalyst of Rosin Carbon/Fe3O4: Highly Efficient Counter Electrode for Dye-Sensitized

3

Solar Cells. Chem. Commun. 2014, 50, 1701-1703.

4

34.

Li, G. R.; Song, J.; Pan, G. L.; Gao, X. P., Highly Pt-Like Electrocatalytic Activity of

5

Transition Metal Nitrides for Dye-Sensitized Solar Cells. Energy Environ. Sci. 2011, 4,

6

1680-1683.

7

35.

Wang, W.; Pan, X.; Liu, W.; Zhang, B.; Chen, H.; Fang, X.; Yao, J.; Dai, S., FeSe 2 Films

8

with Controllable Morphologies as Efficient Counter Electrodes for Dye-Sensitized Solar

9

Cells. Chem. Commun. 2014, 50, 2618-2620.

10

36.

Wang, Y. C.; Wang, D. Y.; Jiang, Y. T.; Chen, H. A.; Chen, C. C.; Ho, K. C.; Chou, H. L.;

11

Chen, C. W., FeS2 Nanocrystal Ink as a Catalytic Electrode for Dye-Sensitized Solar Cells.

12

Angew. Chem. Int. Ed. 2013, 52, 6694-6698.

13

37.

Kung, C. W.; Chen, H. W. i.; Lin, C. Y.; Huang, K. C.; Vittal, R.; Ho, K. C., CoS Acicular

14

Nanorod Arrays for the Counter Electrode of an Efficient Dye-Sensitized Solar Cell. ACS

15

Nano 2012, 6, 7016-7025.

16

38.

Gong, F.; Wang, H.; Xu, X.; Zhou, G.; Wang, Z. S., In Situ Growth of Co0.85Se and Ni0.85Se

17

on Conductive Substrates as High-Performance Counter Electrodes for Dye-Sensitized Solar

18

Cells. J. Am. Chem. Soc. 2012, 134, 10953-10958.

19

39.

Lee, C. T.; Peng, J. D.; Li, C. T.; Tsai, Y. L.; Vittal, R.; Ho, K. C., Ni 3Se4 Hollow

20

Architectures as Catalytic Materials for the Counter Electrodes of Dye-Sensitized Solar Cells.

21

Nano Energy 2014, 10, 201-211.


25


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

40.

Page 26 of 40

Wu, M.; Lin, X.; Guo, W.; Wang, Y.; Chu, L.; Ma, T.; Wu, K., Great Improvement of

2

Catalytic Activity of Oxide Counter Electrodes Fabricated in N2 Atmosphere for Dye-

3

Sensitized Solar Cells. Chem. Commun. 2013, 49, 1058-1060.

4

41.

5 6

Chen, X.; Hou, Y.; Zhang, B.; Yang, X. H.; Yang, H. G., Low-Cost SnSx Counter Electrodes for Dye-Sensitized Solar Cells. Chem. Commun. 2013, 49, 5793-5795.

42.

Yang, B.; Zuo, X.; Xiao, H.; Zhou, L.; Yang, X.; Li, G.; Wu, M.; Ma, Y.; Jin, S.; Chen, X.,

7

SnS2 as Low-Cost Counter-Electrode Materials for Dye-Sensitized Solar Cells. Mater. Lett.

8

2014, 133, 197-199.

9

43.

Liu, Y.; Huang, F.; Xie, Y.; Cui, H.; Zhao, W.; Yang, C.; Dai, N., Controllable Synthesis of

10

Cu2In2ZnS5 Nano/Microcrystals and Hierarchical Films and Applications in Dye-Sensitized

11

Solar Cells. J. Phys. Chem. C 2013, 117, 10296-10301.

12

44.

Yi, L.; Liu, Y.; Yang, N.; Tang, Z.; Zhao, H.; Ma, G.; Su, Z.; Wang, D., One Dimensional

13

CuInS2–ZnS Heterostructured Nanomaterials as Low-Cost and High-Performance Counter

14

Electrodes of Dye-Sensitized Solar Cells. Energy Environ. Sci. 2013, 6, 835-840.

15

45.

Zhang, H.; Yang, L.; Liu, Z.; Ge, M.; Zhou, Z.; Chen, W.; Li, Q.; Liu, L., Facet-Dependent

16

Activity of Bismuth Sulfide as Low-Cost Counter-Electrode Materials for Dye-Sensitized

17

Solar Cells. J. Mater. Chem. 2012, 22, 18572-18577.

18

46.

Yun, S.; Wang, L.; Zhao, C.; Wang, Y.; Ma, T., A New Type of Low-Cost Counter Electrode

19

Catalyst Based on Platinum Nanoparticles Loaded onto Silicon Carbide (Pt/SiC) for Dye-

20

Sensitized Solar Cells. Phys. Chem. Chem. Phys. 2013, 15, 4286-4290.

21

47.

Zhong, J.; Peng, Y.; Zhou, M.; Zhao, J.; Liang, S.; Wang, H.; Cheng, Y. B., Facile Synthesis

22

of Nanoporous TiC–SiC–C Composites as a Novel Counter-Electrode for Dye Sensitized

23

Solar Cells. Microporous Mesoporous Mater. 2014, 190, 309-315.


26

Page 27 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1


48.

Wu, M.; Lin, Y.-n.; Guo, H.; Ma, T.; Hagfeldt, A., Highly Effective Pt/MoSi2 Composite

2

Counter Electrode Catalyst for Dye-Sensitized Solar Cell. J. Power Sources 2014, 263, 154-

3

157.

4

49.

Song, D.; Li, M.; Bai, F. A. N.; Li, Y.; Jiang, Y.; Jiang, B., Silicon Nanoparticles/Pedot–Pss

5

Nanocomposite as an Efficient Counter Electrode for Dye-Sensitized Solar Cells. Funct.

6

Mater. Lett. 2013, 6, 1350048.

7

50.

Song, D.; Li, M.; Li, Y.; Zhao, X.; Jiang, B.; Jiang, Y., Highly Transparent and Efficient

8

Counter Electrode Using SiO2/PEDOT-PSS Composite for Bifacial Dye-Sensitized Solar

9

Cells. ACS Appl. Mater. Interfaces 2014, 6, 7126-7132.

10

51.

Tsai, Y. L.; Li, C. T.; Huang, T. Y.; Lee, C. T.; Lin, C. Y.; Chu, C. W.; Vittal, R.; Ho, K. C.,

11

Electrocatalytic SiC Nanoparticles/PEDOT:PSS Composite Thin Films as the Counter

12

Electrodes of Dye-Sensitized Solar Cells. ChemElectroChem 2014, 1, 1031-1039.

13

52.

14 15

Wang, H.; Wei, W.; Hu, Y. H., Efficient ZnO-Based Counter Electrodes for Dye-Sensitized Solar Cells. J. Mater. Chem. A 2013, 1, 6622-6628.

53.

Maiaugree, W.; Pimanpang, S.; Towannang, M.; Saekow, S.; Jarernboon, W.;

16

Amornkitbamrung, V., Optimization of TiO2 Nanoparticle Mixed PEDOT–PSS Counter

17

Electrodes for High Efficiency Dye Sensitized Solar Cell. J. Non-Cryst. Solids 2012, 358,

18

2489-2495.

19

54.

Song, D.; Li, M.; Wang, T.; Fu, P.; Li, Y.; Jiang, B.; Jiang, Y.; Zhao, X., Dye-Sensitized

20

Solar Cells Using Nanomaterial/PEDOT–PSS Composite Counter Electrodes: Effect of the

21

Electronic and Structural Properties of Nanomaterials. J. Photochem. Photobiol., A 2014,

22

293, 26-31.


27


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

55.

Page 28 of 40

Maiaugree, W.; Towannang, M.; Thiangkaew, A.; Harnchana, V.; Jarernboon, W.;

2

Pimanpang, S.; Amornkitbamrung, V., Composited NiSO4 and PEDOT:PSS Counter

3

Electrode for Efficient Dye-Sensitized Solar Cell Based on Organic T2/T− Electrolyte. Mater.

4

Lett. 2013, 111, 197-200.

5

56.

Li, C. T.; Lee, C. P.; Fan, M. S.; Chen, P. Y.; Vittal, R.; Ho, K. C., Ionic Liquid-Doped

6

Poly(3,4-ethylenedioxythiophene) Counter Electrodes for Dye-Sensitized Solar Cells:

7

Cationic and Anionic Effects on the Photovoltaic Performance. Nano Energy 2014, 9, 1-14.

8

57.

9 10

Bard, A. J.; Faulkner, L. R., Electrochemical Methods: Fundamentals and Applications. 2nd ed.; John Wiley & Sons, Inc.: New York, 2001.

58.

Li, C. T.; Chang, H. Y.; Li, Y. Y.; Huang, Y. J.; Tsai, Y. L.; Vittal, R.; Sheng, Y. J.; Ho, K.

11

C., Electrocatalytic Zinc Composites as the Efficient Counter Electrodes of Dye-Sensitized

12

Solar Cells: Study on the Electrochemical Performances and Density Functional Theory

13

Calculations. ACS Appl. Mater. Interfaces 2015, 7, 28254-28263.

14

59.

Guo, J.; Liang, S.; Shi, Y.; Hao, C.; Wang, X.; Ma, T., Transition Metal Selenides as

15

Efficient Counter-Electrode Materials for Dye-Sensitized Solar Cells. Phys. Chem. Chem.

16

Phys. 2015, 17, 28985-28992.

17

60.

Zhang, H.; Ge, M.; Yang, L.; Zhou, Z.; Chen, W.; Li, Q.; Liu, L., Synthesis and Catalytic

18

Properties of Sb2S3 Nanowire Bundles as Counter Electrodes for Dye-Sensitized Solar Cells.

19

J. Phys. Chem. C 2013, 117, 10285-10290.

20

61.

Zhang, B.; Wang, D.; Hou, Y.; Yang, S.; Yang, X. H.; Zhong, J. H.; Liu, J.; Wang, H. F.;

21

Hu, P.; Zhao, H. J.; Yang, H. G., Facet-Dependent Catalytic Activity of Platinum

22

Nanocrystals for Triiodide Reduction in Dye-Sensitized Solar Cells. Sci. Rep. 2013, 3, 1836.


28

Page 29 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1


62.

Yun, S.; Pu, H.; Chen, J.; Hagfeldt, A.; Ma, T., Enhanced Performance of Supported HfO 2

2

Counter Electrodes for Redox Couples Used in Dye-Sensitized Solar Cells. ChemSusChem

3

2014, 7, 442-450.

4

63.

Guo, J.; Liang, S.; Shi, Y.; Li, B.; Hao, C.; Wang, X.; Ma, T., Electrocatalytic Properties of

5

Iron Chalcogenides as Low-Cost Counter Electrode Materials for Dye-Sensitized Solar Cells.

6

RSC Adv. 2015, 5, 72553-72561.

7

64.

Hou, Y.; Wang, D.; Yang, X. H.; Fang, W. Q.; Zhang, B.; Wang, H. F.; Lu, G. Z.; Hu, P.;

8

Zhao, H. J.; Yang, H. G., Rational Screening Low-Cost Counter Electrodes for Dye-

9

Sensitized Solar Cells. Nat. Commun. 2013, 4, 1583.

10

65.

Wu, M.; Guo, H.; Lin, Y.-n.; Wu, K.; Ma, T.; Hagfeldt, A., Synthesis of Highly Effective

11

Vanadium Nitride (VN) Peas as a Counter Electrode Catalyst in Dye-Sensitized Solar Cells.

12

J. Phys. Chem. C 2014, 118, 12625-12631.

13

66.

Zhou, H.; Shi, Y.; Wang, L.; Zhang, H.; Zhao, C.; Hagfeldt, A.; Ma, T., Notable Catalytic

14

Activity of Oxygen-Vacancy-Rich WO2.72 Nanorod Bundles as Counter Electrodes for Dye-

15

Sensitized Solar Cells. Chem. Commun. 2013, 49, 7626-7628.

16

67.

Zhou, H.; Shi, Y.; Dong, Q.; Wang, Y.; Zhu, C.; Wang, L.; Wang, N.; Wei, Y.; Tao, S.; Ma,

17

T., Interlaced W18O49 Nanofibers as a Superior Catalyst for the Counter Electrode of Highly

18

Efficient Dye-Sensitized Solar Cells. J. Mater. Chem. A 2014, 2, 4347-4354.

19

68.

Song, J.; Li, G. R.; Xiong, F. Y.; Gao, X. P., Synergistic Effect of Molybdenum Nitride and

20

Carbon Nanotubes on Electrocatalysis for Dye-Sensitized Solar Cells. J. Mater. Chem. 2012,

21

22, 20580-20585.


29


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

69.

Page 30 of 40

Jiang, Q. W.; Li, G. R.; Liu, S.; Gao, X. P., Surface-Nitrided Nickel with Bifunctional

2

Structure As Low-Cost Counter Electrode for Dye-Sensitized Solar Cells. J. Phys. Chem. C

3

2010, 114, 13397-13401.

4

70.

Guai, G. H.; Leiw, M. Y.; Ng, C. M.; Li, C. M., Sulfur-Doped Nickel Oxide Thin Film as an

5

Alternative to Pt for Dye-Sensitized Solar Cell Counter Electrodes. Adv. Energy Mater. 2012,

6

2, 334-338.

7

71.

Bajpai, R.; Roy, S.; Koratkar, N.; Misra, D. S., NiO Nanoparticles Deposited on Graphene

8

Platelets as a Cost-Effective Counter Electrode in a Dye Sensitized Solar Cell. Carbon 2013,

9

56, 56-63.

10

72.

Lee, L. T.; He, J.; Wang, B.; Ma, Y.; Wong, K. Y.; Li, Q.; Xiao, X.; Chen, T., Few-Layer

11

MoSe2 Possessing High Catalytic Activity Towards Iodide/Tri-Iodide Redox Shuttles. Sci.

12

Rep. 2014, 4, 4063.

13

73.

Shukla, S.; Loc, N. H.; Boix, P. P.; Koh, T. M.; Prabhakar, R. R.; Mulmudi, H. K.; Zhang,

14

J.; Chen, S.; Ng, C. F.; Huan, C. H. A.; Mathews, N.; Sritharan, T.; Xiong, Q., Iron Pyrite

15

Thin Film Counter Electrodes for Dye-Sensitized Solar Cells: High Efficiency for Iodine

16

and Cobalt Redox Electrolyte Cells. ACS Nano 2014, 8, 10597-10605.

17

74.

18 19

Sun, H.; Zhang, L.; Wang, Z. S., Single-Crystal CoSe2 Nanorods as an Efficient Electrocatalyst for Dye-Sensitized Solar Cells. J. Mater. Chem. A 2014, 2, 16023-16029.

75.

Chuang, H. M.; Li, C. T.; Yeh, M. H.; Lee, C. P.; Vittal, R.; Ho, K. C., A Coral-Like Film

20

of Ni@NiS with Core–Shell Particles for the Counter Electrode of an Efficient Dye-

21

Sensitized Solar Cell. J. Mater. Chem. A 2014, 2, 5816-5824.

22


30

Page 31 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1 2


31


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 32 of 40

1

Table 1. Photovoltaic parameters of the DSSCs with various CEs, measured at 100 mW cm–2 (AM

2

1.5G) light intensity. Voc

Jsc

η

Jsc-IPCE

(V)

(mA cm-2)

(%)

(mA cm-2)

Pt

0.73±0.00

16.87±0.05

0.69±0.00

8.50±0.01

14.49

PEDOT:PSS

0.69±0.00

12.79±0.02

0.33±0.02

2.99±0.05

10.28

Si3N4-5

0.76±0.02

16.11±0.01

0.67±0.01

8.18±0.02

13.62

SiO2-1

0.72±0.02

15.05±0.03

0.55±0.01

5.98±0.03

12.36

SiS2-5

0.70±0.00

16.04±0.02

0.63±0.02

7.02±0.06

13.26

SiSe2-5

0.72±0.01

16.98±0.01

0.67±0.01

8.20±0.03

14.94

CE

FF

3 4

Table 2. Electro-catalytic and electrochemical parameters of various CEs. Jpc

ηc

ΔEp

k0 ×10-3

(mA cm-2)

(V)

(V)

(cm s-1)

Pt

1.39

0.20

0.40

6.70

0.20

7.31

1.75

14.25

2.98

PEDOT:PSS

0.40

0.33

0.66

1.98

0.23

0.22

57.51

15.78

-

Si3N4-5

1.30

0.26

0.52

5.87

0.72

5.75

2.23

15.81

4.02

SiO2-1

0.75

0.30

0.59

3.18

0.70

2.45

5.23

16.03

6.83

SiS2-5

0.99

0.27

0.54

5.63

0.62

4.07

3.15

15.96

5.60

SiSe2-5

1.38

0.26

0.52

5.90

0.66

6.28

2.05

15.80

3.21

CE

Ae

J0

Rct-Tafel

Rs

Rct-EIS

(cm2) (mA cm-2) (Ω cm2) (Ω cm2) (Ω cm2)

5 6


32

Page 33 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1 2

Scheme 1. The charge transfer sketch of the earth abundant silicon-based composite films.

3 4 5


33


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 34 of 40

1 2

Figure 1. FE–SEM images of the films of (a) Pt, (b) PEDOT:PSS, (c) Si3N4/PEDOT:PSS (Si3N4-

3

5), (d) SiO2/PEDOT:PSS (SiO2-1), (e) SiS2/PEDOT:PSS (SiS2-5), and (f) SiSe2/PEDOT:PSS

4

(SiSe2-5); the inset in (b) is obtained at higher resolution.

5


34

Page 35 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1

2 3

Figure 2. (a) Photocurrent density–voltage curves and (b) incident photon–to–current conversion

4

efficiency curves of DSSCs with various electro-catalytic films as the CEs. The standard deviation

5

data of each kind of DSSC were obtained using three cells.


35


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 36 of 40

1

2 3

Figure 3. Cyclic voltammograms of various electro-catalytic films, measured at a scan rate of 100

4

mV s-1.

5


36

Page 37 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1 2

Figure 4. Plots of i–1 vs. ω–0.5 of the RDE with various electro-catalytic films, measured at a scan

3

rate of 2 mV s-1.

4


37


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 38 of 40

1 2

Figure 5. Tafel polarization plot of various electro-catalytic films, measured at a scan rate of 50

3

mV s-1.

4


38

Page 39 of 40

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


1 2 3

Fig. 6 Figure 6. Electrochemical impedance spectra of various electro-catalytic films.

4 5


39


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Page 40 of 40

Table of Content

2

3 4 5 6


40

Earth Abundant Silicon Composites as the ... - ACS Publications

Recommend Documents