Effect of Microwave Heating on the Physical and Petrographic

grind a standard bituminous steam coal to pf in a Babcock Hitachi model 10E10 coal ... The loss factor for coal decreases with tim; i.e., it seems...
0 downloads 0 Views 151KB Size
140

Energy & Fuels 2004, 18, 140-147

Effect of Microwave Heating on the Physical and Petrographic Characteristics of a U.K. Coal E. Lester* and S. Kingman School of Chemical, Environmental and Mining Engineering, University of Nottingham, Nottingham NG7 2RD, United Kingdom Received April 16, 2003. Revised Manuscript Received September 23, 2003

This investigation presents the findings of an initial study into whether the grinding resistance of coal can be reduced with microwave pretreatment without significantly altering the fundamental properties of the coal. A U.K. steam coal was sieved into seven size fractions and then treated with high-electric-field-strength microwave energy for a short duration to investigate how the grinding resistance changed, in comparison to that of untreated coal, and how the chemical and petrographic compositions were altered after exposure. Short exposures to microwave energy (on the order of seconds) gave significant increases in grindability, and these changes were related to particle size. The effects on petrographic and chemical characteristics were considered to be negligible. Conclusions are made regarding the scale-up of this technology and the likely impact of microwave treatment in the electrical power industries.

1. Introduction The grinding of coal prior to combustion in a pulverized fuel burner requires a significant amount of energy. The actual amount of energy required is difficult to quantify, because there are several parameters that affect the hardness of a coal, including moisture content,1 maceral composition,2 and rank.3 Achieving the standard used for particle size in pulverized fuel (pf) combustion, which is 70% with a size of