Efficient Isoprene Secondary Organic Aerosol Formation from a Non

Aug 22, 2016 - The Journal of Physical Chemistry A 2016 120 (51), 10150-10159 .... campaigns of 2012 and 2013 in the western Mediterranean region...
2 downloads 0 Views 969KB Size
Subscriber access provided by Northern Illinois University

Article

Efficient isoprene secondary organic aerosol formation from a non-IEPOX pathway Jiumeng Liu, Emma L. D'Ambro, Ben Hwan Lee, Felipe Lopez-Hilfiker, Rahul Zaveri, Jean C. Rivera-Rios, Frank N. Keutsch, Siddharth Iyer, Theo Kurtén, Zhenfa Zhang, Avram Gold, Jason Douglas Surratt, John E. Shilling, and Joel A. Thornton Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.6b01872 • Publication Date (Web): 22 Aug 2016 Downloaded from http://pubs.acs.org on August 23, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 31

Environmental Science & Technology

Efficient isoprene secondary organic aerosol formation from a non-IEPOX pathway Jiumeng Liu1†, Emma L. D'Ambro2†, Ben H. Lee3, Felipe D. Lopez-Hilfiker3, Rahul A. Zaveri1, Jean C. Rivera-Rios4, Frank N. Keutsch4, Siddharth Iyer5, Theo Kurten5, Zhenfa Zhang6, Avram Gold6, Jason D. Surratt6, John E. Shilling1*, and Joel A. Thornton2,3* 1

Atmospheric Sciences and Global Change Division, Pacific Northwest National Laboratory Richland, WA 99352, USA. 2

Department of Chemistry, University of Washington, Seattle, WA 98195, USA.

3

Department of Atmospheric Sciences, University of Washington, Seattle, WA 98195, USA.

4

Paulson School of Engineering and Applied Sciences and Department of Chemistry and Chemical Biology, Harvard University, Cambridge, MA 02138, USA. 5

Department of Chemistry, University of Helsinki, Helsinki FI-00014, Finland.

6

Department of Environmental Sciences and Engineering, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599, USA. *Correspondence to: Joel Thornton Phone: 206-543-4010; Email:[email protected]; Present address: Department of Chemistry, University of Washington, Seattle, WA 98195, USA. John Shilling Phone: 509-375-6874; Email:[email protected]; Present address: Atmospheric Sciences and Global Change Division, Pacific Northwest National Laboratory Richland, WA 99352, USA. †

Equally contributing authors.

Keywords:

Isoprene secondary organic aerosol, dihydroxydihydroperoxides, Chamber wall losses

ACS Paragon Plus Environment

Environmental Science & Technology

1

Abstract

2

With a large global emission rate and high reactivity, isoprene has a profound effect upon

3

atmospheric chemistry and composition. The atmospheric pathways by which isoprene converts

4

to secondary organic aerosol (SOA) and how anthropogenic pollutants such as nitrogen oxides

5

and sulfur affect this process are a subject of intense research because particles affect Earth’s

6

climate and local air quality. In the absence of both nitrogen oxides and reactive aqueous seed

7

particles, we measure SOA mass yields from isoprene photochemical oxidation of up to 15%,

8

which are factors of 2, or more, higher than those typically used in coupled chemistry-climate

9

models. SOA yield is initially constant with the addition of increasing amounts of nitric oxide

10

(NO) but then sharply decreases for input concentrations above 50 ppbv. Online measurements

11

of aerosol molecular composition show that the fate of second-generation RO2 radicals is key to

12

understanding the efficient SOA formation and the NOx dependent yields described here and in

13

the literature. These insights allow for improved quantitative estimates of SOA formation in the

14

pre-industrial atmosphere and in biogenic-rich regions with limited anthropogenic impacts and

15

suggest a more complex representation of NOx dependent SOA yields may be important in

16

models.

17

ACS Paragon Plus Environment

Page 2 of 31

Page 3 of 31

18

Environmental Science & Technology

TOC/Abstract Art.

19

ACS Paragon Plus Environment

Environmental Science & Technology

20

Introduction

21

Global forests emit 500 to 750 Tg of isoprene per year, the largest flux of biogenic or

22

anthropogenic non-methane hydrocarbons to the atmosphere.1 Isoprene-derived secondary

23

organic aerosol (iSOA) is predicted to comprise a significant fraction of the organic aerosol (OA)

24

burden over large regions of the globe.2-5 Isoprene also influences the oxidative capacity of the

25

troposphere, particularly in pristine forested regions,6,

26

atmospheric radicals and its effect on the fate of reactive nitrogen oxides, with consequences for

27

the abundance and lifetime of greenhouse gases such as methane and tropospheric ozone, and

28

likely indirect effects on particle formation, growth,8 and SOA yield from other VOCs.9 There is

29

thus great interest in resolving the atmospheric fate of isoprene derived carbon.

7

due to its high reactivity towards

30 31

Recently, there has been significant interest in determining whether anthropogenic pollutants,8, 10

32

such as NOx and sulfur oxides, may enhance iSOA formation, and thereby increase the climate

33

effects of aerosol particles, which directly interact with solar radiation and alter the reflectivity

34

and lifecycle of clouds. The magnitude of this anthropogenic forcing of a natural aerosol

35

formation process has been difficult to quantify with certainty,11 in part because the iSOA

36

formation potential under pre-industrial “pristine” conditions is poorly known. The net

37

anthropogenic aerosol forcing of climate is determined by referencing to year 1750 conditions,

38

when NOx and sulfur emissions were approximately 4 and 6 times lower, respectively, than

39

today.12 Thus, assessing the anthropogenic aerosol forcing is inherently tied to accurately

40

quantifying natural aerosol sources under pre-industrial conditions.10 This need, in turn, requires

41

a mechanistic-level understanding of the iSOA formation pathways.

42

ACS Paragon Plus Environment

Page 4 of 31

Page 5 of 31

Environmental Science & Technology

43

In the atmosphere, isoprene reacts with hydroxyl radicals (OH) to form reactive organic peroxy

44

radical intermediates (ISOPO2). The short-lived (~100 s in forests13) ISOPO2 intermediates

45

ultimately react with hydroperoxyl radicals (HO2), nitric oxide (NO), or other organic peroxy

46

radicals (RO2). The HO2 pathway, estimated to account globally for one half of the reactive fate

47

of ISOPO2,11 and possibly more in the pre-industrial atmosphere, produces a hydroxy

48

hydroperoxide (ISOPOOH), see Figure 1. In remote regions and in the pre-industrial atmosphere

49

where both NO and HOx concentrations are low, the ISOPO2 radical also isomerizes to produce

50

hydroperoxyaldehyde species.11, 14

51 52

Most recent experiments have focused on iSOA formed from the multiphase acid-catalyzed

53

chemistry of ISOPOOH-derived epoxydiols (IEPOX).12, 15-19 However, measurements of iSOA

54

yield under low-NOx conditions, in the absence of reactive aqueous seed particles should be

55

revisited, particularly in light of recent findings of significant wall artifacts.20 These conditions

56

likely represent much of the pre-industrial atmosphere and remote pristine regions in present-day

57

where isoprene is oxidized far from anthropogenic emissions. Moreover, most previous

58

experiments studying photochemical iSOA formation, rather than that from IEPOX multiphase

59

chemistry, were conducted under conditions where the oxidant field and thus product branching

60

is continuously changing and where the important iSOA-forming products are apparently lost to

61

the walls of the reaction chamber, and thus undetected.20 In addition, most models that do

62

include a NOx dependence of SOA yields classify them as either high-NOx or NOx-free, while

63

studies have suggested that NOx dependence for iSOA is more complex.5, 21, 22 Addition of NOx

64

has been shown to change the relative branching ratios of isoprene RO2 radicals reacting with

65

HO2 and NO, but the dynamic NOx-dependence of iSOA yield is not mechanistically well

ACS Paragon Plus Environment

Environmental Science & Technology

66

understood and therefore difficult to accurately parameterize for inclusion in models. These

67

issues suggest a continued need for additional studies of iSOA formation.

68 69

Here we report results from a series of laboratory studies in which we systematically investigate

70

photochemical iSOA formation as a function of the branching between isoprene-derived peroxy

71

radical reactions with hydroperoxyl (HO2) and nitric oxide (NO) radicals. Our experiments were

72

operated in the continuous-flow mode, which provides an alternative approach to most previous

73

studies. We measure iSOA yields that are significantly higher than most literature values and that

74

are dependent on both H2O2 and NO concentrations. We also show that this approach can have

75

lower wall-loss effects (due to equilibration) and simplifies the kinetic interpretation of the

76

experimental results by investigating steady state periods. That is, iSOA yields are obtained for a

77

pre-determined extent of aging, set by oxidant concentrations and chamber residence time, as

78

opposed to batch-mode experiments where products are continuously passing through several

79

photochemical generations which might have significantly different iSOA production and loss

80

terms. We use a box model based on a detailed chemical mechanism to investigate the oxidant

81

fields and thus infer production pathways of online-measured gas- and condensed-phase

82

compounds. Our results demonstrate a pathway for efficient iSOA formation independent of

83

IEPOX chemistry and may be important in regions of the atmosphere far removed from

84

anthropogenic influence.

85 86

Experimental Section

87

Chamber Experiment Overview

ACS Paragon Plus Environment

Page 6 of 31

Page 7 of 31

Environmental Science & Technology

88

Experiments were conducted in the Pacific Northwest National Laboratory (PNNL) 10.6 m3

89

Teflon environmental chamber.23 The chamber was flushed with purified air from AADCO pure

90

air generators until the particle concentration was less than 1 particle cm-3 before the start of

91

continuous-mode experiments. Isoprene, and/or NO in purified air were injected from calibrated

92

gas cylinders with flows regulated by MKS mass flow controllers. H2O2 was introduced into the

93

chamber by passing pure air through a gently heated glass bulb, with the H2O2 solution (Sigma-

94

Aldrich, 50 wt% in H2O) continuously injected into the bulb using a syringe pump. Humidity

95

was controlled at 50%, by passing pure air at a variable flow rate through pure water (18.2 MΩ

96

cm,