Enantioselective α-Benzoyloxylation of Ketones Promoted by Primary

Feb 16, 2012 - ... “A. Mangini”, Alma Mater Studiorum-University of Bologna, viale Risorgimento 4, ... School of Science and Technology, Chemistry...
0 downloads 0 Views 519KB Size
Download PDF
Article pubs.acs.org/joc

Enantioselective α-Benzoyloxylation of Ketones Promoted by Primary Amine Catalyst Milind S. Jadhav,†,‡ Paolo Righi,† Enrico Marcantoni,‡ and Giorgio Bencivenni*,† †

Department of Organic Chemistry “A. Mangini”, Alma Mater Studiorum-University of Bologna, viale Risorgimento 4, I-40136 Bologna, Italy ‡ School of Science and Technology, Chemistry Division, University of Camerino, via S. Agostino 1, 62032 Camerino, Italy S Supporting Information *

ABSTRACT: A mixture of 9-amino-(9-deoxy)epi-dihydroquinidine and salicylic acid was able to promote the direct reaction of various cyclohexanones with dibenzoyl peroxide, thus affording the corresponding protected α-hydroxy carbonyl compounds in high yield and enantioselectivity. Interestingly the same catalytic salt was found to be active when 1-indanones derivatives were directly employed in the reaction with dibenzoyl peroxide furnishing chiral 1-oxo-2,3-dihydro-1Hinden-2-yl benzoates in high yields and enantioselectivity. Furthermore their treatment with NaBH4 gives easy access to the corresponding enantioenriched 1,2-diols in high yields and without any loss of stereoselectivity.

■

Scheme 1. Proposed Catalytic Cycle for the αBenzoyloxylation of Cyclohexanone

INTRODUCTION The development of catalytic methods that furnish enantioenriched α-functionalized ketones starting from the commercially available precursors, thus avoiding the preparation of reactive metal enolates, are highly required.1 In this field the construction of enantiomerically active α-hydroxy or protected α-hydroxy carbonyl compounds represents an important goal for asymmetric organocatalysis principally because of the important role that this class of substrates play as natural products or fundamental building blocks for the construction of more elaborated structures.2 During the past years chiral primary amines derived from commercially available cinchona alkaloids3 were revealed to be among the most powerful catalysts able to promote the functionalization of sterically demanding carbonyl compounds such as ketones and branched aldehydes via iminium ion,4 enamine,5 and dienamine6 activation modes. Because of the great ability to impart a unique reaction pathway and elevated enantioselectivity,7 we believed that this class of catalysts could efficiently promote the reaction between diverse cyclic saturated ketones and dibenzoyl peroxide in order to furnish enantioenriched α-benzoyloxylated carbonyl compounds. Our idea is to exploit the capability of primary amine to condense with the cyclic ketone and furnish a sufficiently stable and reactive enamine with the required nucleophilicity8 to react with the electrophilic dibenzoyl peroxide (Scheme 1). In this report we would like to present our results for the reaction of α-benzoyloxylation of cyclic ketones under enamine catalysis using 9-amino(9-deoxy)epi-hydroquinidine as catalyst and dibenzoyl peroxide as oxidizing agent.9 © 2012 American Chemical Society

■

RESULTS AND DISCUSSION Our screening started by comparing the reactivity of different primary amine-based organocatalysts (Figure 1) for the reaction of cyclohexanone and dibenzoyl peroxyde. As outlined in Table 1, among the various chiral primary amines tested, those based on the scaffold of cinchona alkaloid, in combination with salicylic acid as co-catalyst were revealed to be the most active for the enantioselective α-functionalization of cyclohexanone albeit with low amount of isolated product (Table 1, entry 1−5). We screened other acids, but no Received: December 5, 2011 Published: February 16, 2012 2667

dx.doi.org/10.1021/jo2024976 | J. Org. Chem. 2012, 77, 2667−2674

The Journal of Organic Chemistry

Article

the presence of various undefined byproducts was observed in the crude mixture of the reaction. Also the use of more polar solvents such as methanol (MeOH), ethyl acetate (EtOAc), and tetrahydrofuran (THF) did not furnish satisfying results so that toluene was revealed to be the best compromise in term of yield and enantioselectivity (Table 3, entries 3−6). We next carried out the reaction with different molar amounts of ketone and at different concentrations of benzoyl peroxide because as already observed in Table 1, an excess of cyclohexanone could increase the yield of the reaction (entry 13). For this reason we believed that a further study on the effect of the different ratio between ketone and peroxide was necessary once the screening of solvents and bases was completed. We found that a good compromise between yield (80%) and enantioselectivity (96.5% ee) could be achieved in a 0.4 M solution of toluene at 0 °C (Table 4, entry 5). The αbenzoyloxylation was performed using a 10 mol % of catalyst loading thus highlighting the efficiency of the process. With the optimized condition in hand we explored the scope of the benzoyloxylation of cyclic ketones with different substituents and heteroatoms (Table 5). As outlined in Table 5 the reaction furnished the desired 2-oxocyclohexyl benzoates 3a−i in high yields and excellent enantioselectivities. In any case the presence of the ketone functionalized at both αpositions has never been observed. Interestingly when 9amino(9-deoxy)epi-hydroquinine (ent-F), the pseudoenantiomer of catalyst F, was employed, the opposite enantiomers of the α-functionalized ketones were obtained with good level of yields and enantioselectivities for almost all entries (Table 5, entries 3, 5, 8, and 10). The absolute configuration of compounds 3a was assigned to be R by comparison with the previously reported literature data,10 and by analogy it was assigned to be the same for compounds 3b−i.11 When racemic ketone 1b was used, the reaction resulted to be highly enantioselective and regioselective; however, poor diastereoselectivity was observed for the corresponding product 3b (Table

Figure 1. Primary amine tested for the α-functionalization of cyclic ketone.

improvements, especially of yields, were observed (Table 1, entry 6−13). Interestingly salicylic acid was revealed to be the best choice probably because of a fruitful hydrogen bond interaction between the hydroxyl group of the acid and the carbonyl groups of the benzoyl peroxide. We then decided to study the effect of an inorganic base5a that might increase the reaction rate and maintain the good level of enantioselectivity by quenching the benzoic acid generated during the course of the reaction (Scheme 1). The addition of 1.2 equiv of solid Na2CO3 had a negative effect on the yield of the process when catalyst D and salicylic acid were used (Table 1, entry 14) but gave a better yield after 24 h of reaction time and furnished high enantiocontrol when catalyst F was used (Table 1, entry 15). Indeed as outlined in Table 2 the use of weaker or stronger inorganic bases did not furnish significant improvements if compared to those obtained using Na2CO3. The effects of different solvents were then considered. Interestingly, as shown in Table 3 (entries 1 and 2), the reaction can be performed in water as well as in absence of solvent with relevant results. However, under these conditions,

Table 1. Catalyst and Acid Screening for the α-Benzoyloxylation of Cyclohexanonea

entry

cat.

acid

base

yield (%)c

ee (%)d

1 2 3 4 5 6 7 8 9 10 11 12 13b 14 15

A B C D E D D D D D D D D D F

2-OH-PhCOOH 2-OH-PhCOOH 2-OH-PhCOOH 2-OH-PhCOOH 2-OH-PhCOOH TFA DCA PTSA PhCOOH (PhO)2PO2H D-NBocPhGlyOH 2-F-PhCOOH 2-F-PhCOOH 2-OH-PhCOOH 2-OH-PhCOOH

none none none none none none none none none none none none none Na2CO3 Na2CO3

none none 99/60 96.4 91 90 94.5 90 >99 93 80

Unless otherwise noted, the reactions were performed for 80 h at 0 °C using 0.2 mmol of 2 and 0.5 mmol of 1a−f, 0.02 mmol of catalyst F, and 0.04 mmol salicylic acid in a 0.4 M toluene solution. bIsolated yield. cDetermined by 1H NMR analysis of the crude reaction mixture. dDetermined by HPLC analysis on a chiral stationary phase. eReaction performed using the pseudoenantiomeric form of catalyst F. a

Table 6. Direct α-Benzoyloxylation of 1-Indanonesa

entry

R

product

yield (%)b

ee (%)c

1 2 3 4 5 6 7 8d 9e

H 5-Br 5-F 5-OMe 6-Me 5-Cl 4-CF3 H H

5a 5b 5c 5d 5e 5f 5g 5a 5a

80 66 55 30 82 68 37 40 77

84 80 79 77 60 76 40 89 84

Unless otherwise noted, the reactions were performed for 80 h at 0 °C using 0.2 mmol of 2 and 0.5 mmol of 4a−e, 0.04 mmol of catalyst F, and 0.08 mmol salicylic acid in a 0.1 M toluene solution. bIsolated yield. cDetermined by HPLC analysis on a chiral stationary phase. dReaction performed for 7 days at 0 °C using 2 equiv of 4a. eReaction performed using 10 mol % of 2,6-di-tert-butyl-4-methylphenol (BHT) as radical scavenger. a

have never been used for the enantioselective α-oxygenation performed by means of organocatalytic strategies, we envisaged that 9-amino(9-deoxy)epi-hydroquinidine F could be efficiently applied for our purpose. In fact although 1-indanone derivatives represent a class of bulky aromatic ketones, the almost complete coplanarity of the five-membered cyclopentanone with respect to the fused aromatic ring represents an advantage for the approach of the primary amine catalyst thus promoting the enamine formation and the subsequent addition to the dibenzoyl peroxide. As outlined in Table 6 the reaction, performed under the optimized condition but using 20 mol % of catalyst loading, proceeded smoothly at 0 °C, furnishing the desired α-benzoylindanones from moderate to good yields and good enantioselectivity (Table 6, entries 1−7). Various substituents that differentiate the stereoelectronic nature of the starting 1-indanones could be applied with a general good

efficiency of the process. Yields and enantioselectivity are generally quite good apart from 5-methoxy-1-indanone 4d that furnished the desired product 5d in 30% isolated yield (Table 6, entry 4) and 4-trifluoromethyl-1-indanone 4g that allowed us to isolate the desired α-benzoylindanone 5g in 37% isolated yield and only 40% enantiomeric excess (Table 6, entry 7). Interestingly the enantioselectivity could be increased to 89% ee by performing the reaction with 2 equiv of ketone 4a; however, the corresponding product 5a was isolated after 7 days of reaction in a lower yield if compared with the reaction conducted with 2.5 equiv of 4a (Table 6, entry 8). In order to exclude the presence of a possible radical side pathway that might affect the stereocontrol of the α-benzoyloxylation, we performed a test reaction using 10 mol % 2,6-di-tert-butyl-4methylphenol (BHT), and compound 5a was isolated without any decrease of yield and enantiocontrol (Table 6, entry 9). 2670

dx.doi.org/10.1021/jo2024976 | J. Org. Chem. 2012, 77, 2667−2674

The Journal of Organic Chemistry

Article

procedure. All cyclohexanone and 1-indanone derivatives were commercially available and used as received. The diastereomeric ratio was determined by 1H NMR analysis of the crude reaction mixture and confirmed by HPLC analysis on chiral stationary phase columns. HPLC analysis on chiral stationary phase were performed using Chiralpak AD-H column, Chiralcel OD-H column, Chiralcel OJH, and Lux Amylose-2 columns and i-PrOH/hexane as the eluent. HPLC traces for compounds 3a−i, 5a−g, cis-(1S,2R)-6b, and trans(1R,2R)-7b were compared to racemic samples prepared by mixing the two product antipodes obtained performing the reaction with catalyst 9-amino(9-deoxy)epi-hydroquinidine (F) and the pseudoenantiomer 9-amino(9-deoxy)epi-hydroquinine (ent-F) separately. General Procedure for the Benzoyloxylation of Cyclohexanone. All reactions were carried out in undistilled toluene. In an ordinary vial equipped with a Teflon-coated stir bar, catalyst F (0.02 mmol, 10 mol %) was dissolved in 500 μL of toluene, and 2 hydroxybenzoic acid (0.04 mmol, 20 mol %) was added. The resulting solution was stirred at 0 °C for 10 min. Cyclohexanone derivative (0.5 mmol, 2.5 equiv) was added, followed by the addition of the dibenzoyl peroxide (0.2 mmol) and Na2CO3 (1.2 equiv) at 0 °C. Stirring was continued for 80−84 h. The crude mixture was diluted with CH2Cl2 and flushed through a short plug of silica, using dichloromethane/ethyl acetate 1:1 as the eluent (20 mL). Solvent was removed in vacuo. Crude product was purified by flash column chromatography using hexane/diethyl ether as the eluent mixture. (1R)-2-Oxocyclohexyl Benzoate10 (3a) (Table 5, entry 1). The reaction was carried out following the general procedure. The title compound was isolated as a white solid by column chromatography (hexane/Et2O = 80/20) in 80% yield and 96.5% ee. HPLC analysis on a Chiralcel OD-H column: 90/10 hexane/i-PrOH, flow rate 1.00 mL/ min, λ = 214 nm: τmajor = 7.186 min, τminor = 10.328 min; ESI-MS: 219 (M + 1)+, 241 (M + Na)+. [α]20D = +15.6 (c 0.77, CHCl3, 96.5% ee). 1 H NMR (400 MHz, CDCl3) δ 1.62−1.77(m, 1H), 1.78−1.91 (m, 1H), 1.92−1.99 (m, 1H), 1.99−2.08 (m, 1H), 2.09−2.19 (m, 1H), 2.38−2.52 (m, 2H), 2.54−2.62 (m, 1H), 5.41 (ddd, 1H, J = 12.1 Hz, J = 7.3 Hz, J = 1.1 Hz), 7.44 (m, 2H), 7.57 (m, 1H), 8.09 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 23.8 (CH2), 27.2 (CH2), 33.2 (CH2), 40.7 (CH2), 76.9 (CH), 128.3 (CH), 129.7 (C), 129.9 (CH), 133.1 (CH), 165.6 (C), 204.3 (C). (1R,4S)-4-Methyl-2-oxocyclohexyl Benzoate9 (cis-3b) and (1R,4R)-4-Methyl-2-oxocyclohexyl Benzoate9 (trans-3b) (Table 5, entry 2). The reaction was carried out following the general procedure to furnish the crude product 3b as 1:1 mixture of cis-isomer (1R,4S)-3b and trans-isomer (1R,4R)-3b. A white solid was isolated by column chromatography (hexane/Et2O = 85/15) in 88% yield as a mixture of cis- and trans- isomers and >99% ee for cis-3b isomer HPLC analysis on a Chiralcel OD-H column: 99/1 hexane/i-PrOH, flow rate 1.00 mL/min, λ = 254 nm: τmajor = 13.07 min, τminor = 20.64 min; and 96.5% ee for trans-3b isomer HPLC analysis on a Chiralcel OD-H column: 90/10 hexane/i-PrOH, flow rate 1.00 mL/min, λ = 214 nm: τmajor = 6.412 min, τminor = 9.837 min; ESI-MS: 233 (M + 1)+, 255 (M + Na)+, 271 (M + K)+. [α]20D cis-3b = +14.5 (c 0.33, CHCl3, >99% ee); [α]20D trans-3b = +13.2 (c 0.11, CHCl3, 96.5% ee). 1H NMR (400 MHz, CDCl3) trans-3b δ 1.09 (d, 3H, J = 6.3 Hz), 1.60 (m, 1H), 1.87−2.05 (m, 3H), 2.21 (td, 1H, J = 12.9 Hz, J = 0.9 Hz), 2.36−2.43 (m, 1H), 2.50−2.56 (m, 1H), 5.40 (ddd, 1H, J = 12.5 Hz, J = 7.1 Hz, J = 0.9 Hz), 7.44 (m, 2H), 7.57 (m, 1H), 8.1 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 22.0, 31.7, 32.3, 35.0, 48.7, 77.2, 128.3, 129.7 129.9 133.1, 165.7, 203.7. (1R,5R)-2-Oxo-5-phenylcyclohexyl Benzoate (cis-3c) and (1R,5S)-2-Oxo-5-phenylcyclohexyl Benzoate (trans-3c) (Table 5, entry 4). The reaction was carried out following the general procedure to furnish the crude product 3c as a 1:1 mixture of cis(1R,5S)-3c and trans-(1R,5R)-3c. The title compound was isolated as a colorless oil by column chromatography (hexane/Et2O = 80/20) in 70% yield as a mixture of cis- and trans-isomers and >99% ee for cis-3c isomer HPLC analysis on a Chiralcel AD-H column: 99/1 hexane/iPrOH, flow rate 1.00 mL/min, λ = 254 nm: τmajor = 24.23 min, τminor = 27.99 min; and 37% ee for trans-3c isomer HPLC analysis on a Chiralpak AD-H column: 90/10 hexane/i-PrOH, flow rate 0.750 mL/

To enhance the synthetic utility of this methodology, we developed a one-pot procedure for the synthesis of 1,2-diols2g starting from enantioenriched (R)-5-bromo-1-oxo-2,3-dihydro1H-inden-2-yl benzoate 5b. The reaction was conducted with 3 equiv of NaBH4 as reducing agent in a 1:3 mixture of MeOH and THF at 0 °C for 15 min then the solution was placed at 50 °C for 18 h. The crude mixture gave a 4:1 mixture of the corresponding 1,2-diols in favor of cis-isomer. After purification cis-(1S,2R)-6b was isolated in a 53% yield and 84% ee and trans-(1R,2R)-7b in 25% yield and 80% ee12 (Scheme 2). Scheme 2. Synthesis of 5-Bromo-2,3-dihydro-1H-indene-1,2diol

■

CONCLUSION In conclusion we have explored the reactivity of cyclic ketones for the enantioselective synthesis of their protected α-hydroxy derivatives using 9-amino(9-deoxy)epi-hydroquinidine (F) in combination with salicylic acid as catalyst. The reaction demonstrated to be extremely efficient and highly enantioselective thus furnishing a new and alternative procedure11 for the synthesis of protected α-hydroxy ketones. The new methodology was also effectively applied to the direct enantioselective synthesis of α-oxygenated 1-indanones derivatives that might be easily converted into 1,2-diols thus furnishing a new way of synthesis of this important class of compounds.

■

EXPERIMENTAL SECTION

General. The 1H and 13C NMR spectra were recorded on 400 and 600 MHz spectrometers. NOE spectra were recorded using the DPFGSE-NOE sequence,13 using a mixing time of 2.00 s and “rsnob” 20 ÷ 50 Hz wide selective pulses, depending on the crowding of the spectra region. The chemical shifts (δ) for 1H and 13C are given in ppm relative to residual signals of the solvents (CDCl3 and CD3CN). Coupling constants are given in Hz. Carbon types were determined from DEPT 13C NMR14 experiments. The following abbreviations are used to indicate the multiplicity: s, singlet; d, doublet; t, triplet; q, quartet; quint, quintet, m, multiplet; bs, broad signal. Purification of reaction products was carried out by flash chromatography (FC) on silica gel (230−400 mesh) according to the method of Still.15 Melting points of solid new samples were determined by melting point apparatus or by differential scanning calorimetry (DSC) on a DSC apparatus, adopting a temperature program consisting of two heating and one cooling ramps starting from room temperature (heating/ cooling rate 2 °C/min under a nitrogen atmosphere). Each sample (3−5 mg) was heated up to only 150 °C in order to avoid thermal decomposition. Organic solutions were concentrated under reduced pressure on a rotary evaporator. Optical rotations are reported as follows: [α]rtD (c in g per 100 mL, solvent, % ee). All reactions were set up in the air and using undistilled solvent, without any precautions to exclude moisture. Commercial grade reagents and solvents were used without further purification; otherwise, where necessary, they were purified as recommended.16 Commercially available chiral primary amine catalysts A ((1S,2S)-1,2-diphenylethane-1,2-diamine) and C ((R)-1,1′-binaphthyl-2,2′-diamine) were used as received. Catalyst B,17 D, E, F,18 and ent-F were prepared from literature 2671

dx.doi.org/10.1021/jo2024976 | J. Org. Chem. 2012, 77, 2667−2674

The Journal of Organic Chemistry

Article

min, λ = 214 nm: τmajor = 15.40 min, τminor = 24.51 min; HRMS (ESI+) calcd for C19H19O3 295.1329, found 295.1326; cis-3c: [α]20D = +30.6 (c 0.51, CHCl3, 99% ee). trans-3c: [α]20D = −10.7 (c 1.04, CHCl3, 37% ee). 1H NMR (400 MHz, CDCl3) cis-3c (9:1 mixture of cis:trans isomers) δ 2.21−2.33 (m, 2H), 2.47−2.58 (m, 3H), 2.75−2.85 (m, 1H), 3.48 (quint, 1H, J = 6.7 Hz), 5.37 (m, 1H), 7.22−7.30 (m, 1H), 7.33−7.40 (m, 4H), 7.44−7.53 (m, 2H), 7.57−7.65 (m, 1H), 8.08− 8.14 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 33.3 (CH2), 37.2 (CH), 37.8 (CH2), 38.3 (CH2), 75.7 (CH), 126.7 (CH), 126.8 (CH), 128.5 (CH), 128.8 (CH), 129.8 (CH), 133.4 (CH), 142.4 (C), 165.4 (C), 206.0 (C). 1H NMR (400 MHz, CDCl3) trans-3c δ 1.91−2.05 (m, 1H), 2.19−2.36 (m, 2H), 2.56−2.76 (m, 3H), 3.31 (tt, 1H, J = 12.6 Hz, J = 3.4 Hz), 5.64 (ddd, 1H, J = 12.7 Hz, J = 6.3 Hz, J = 0.7 Hz), 7.22−7.30 (m, 3H), 7.32−7.38 (m, 2H), 7.45 (M, 2H), 7.58 (m, 1H), 8.10 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 34.4 (CH2), 39.8 (CH2), 39.9 (CH2), 41.9 (CH), 76.0 (CH), 126.6 (CH), 127.0 (CH), 128.4 (CH), 128.8 (CH), 129.6 (C), 129.9 (CH), 133.2 (CH), 143.1 (C), 165.5 (C), 203.7 (C). (R)-5,5-Dimethyl-2-oxocyclohexyl Benzoate10 (3d) (Table 5, entry 6). The reaction was carried out following the general procedure. The title compound was isolated as a colorless oil by column chromatography (pentane/Et2O = 80/20) in 80% yield and 96.4% ee. HPLC analysis on a Chiralpak AD-H column: 80/20 hexane/i-PrOH, flow rate 0.700 mL/min, λ = 214 nm: τmajor = 8.25 min, τminor = 9.56 min; ESI-MS: 247 (M + 1)+, 269 (M + Na)+. [α]20D = +19.2 (c 0.94, CHCl3, 96.4% ee). 1H NMR (400 MHz, CDCl3) δ 1.11 (s, 3H), 1.32 (s, 3H), 1.66−1.83 (m, 2H), 1.90 (t, J = 16.0 Hz, 1H), 2.12 (ddd, J = 12.6 Hz, J = 6.4 Hz, J = 3.3 Hz, 1H,), 2.42 (ddd, J = 14.3 Hz, J = 4.6 Hz, 2.7 Hz, 1H), 2.64 (td, J = 14.0 Hz, J = 6.4 Hz, 1H), 5.55 (dd, J = 13.0 Hz, J = 6.4 Hz, 1H), 7.39−7.47 (m, 2H), 7.53− 7.59 (m, 1H), 8.04−8.11 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 24.9, 31.6, 32.3, 37.2, 39.8, 45.5, 74.4, 128.5, 129.9, 130.1, 133.3, 165.9, 205.1. (R)-4-Oxotetrahydro-2H-pyran-3-yl Benzoate19 (3e) (Table 5, entry 7). The reaction was carried out following the general procedure. The title compound was isolated as a white solid by column chromatography (pentane/Et2O = 75/25) in 71% yield and 91% ee. HPLC analysis on a Chiralcel OD-H column: 9/1 hexane/iPrOH, flow rate 1.00 mL/min, λ = 254 nm: τmajor = 10.15 min, τminor = 13.91 min; ESI-MS: 221 (M + 1)+, 243 (M + Na)+. Mp (DSC, 2 °C/ min): 79 °C. [α]20D = +11.9 (c 1.02, CHCl3, 91% ee). 1H NMR (600 MHz, CDCl3) δ 2.60 (m, 1H), 2.84 (m, 1H), 3.73 (m, 2H), 4.31 (m, 1H), 4.46 (m, 1H), 5.52 (m, 1H), 7.45 (m, 2H), 7.58 (m, 1H), 8.07 (m, 2H); 13C NMR (150 MHz, CDCl3) δ 42.2 (CH2), 68.2 (CH2), 70.5 (CH2), 74.0 (CH), 128.4 (CH), 129.0 (C), 129.9 (CH), 133.4 (CH), 165.0 (C), 200.3 (C). (S)-4-Oxotetrahydro-2H-thiopyran-3-yl Benzoate 20 (3f) (Table 5, entry 9). The reaction was carried out following the general procedure. The title compound was isolated as a white solid by column chromatography (pentane/Et2O = 80/20) in 22% yield and 94.5% ee. HPLC analysis on a Chiralcel OD-H column: 8/2 hexane/iPrOH, flow rate 0.750 mL/min, λ = 254 nm: τmajor = 10.41 min, τminor = 12.08 min; ESI-MS: 259 (M + Na)+, 275 (M + K)+. [α]20D = +17.1 (c 0.23, CHCl3, 94.5% ee). 1H NMR (600 MHz, CDCl3) δ 2.90−3.02 (m, 4H), 3.14−3.23 (m, 2H), 5.61 (dd, 1H, J = 11.2 Hz, J = 5.8 Hz), 7.45 (m, 2H), 7.59 (m, 1H), 8.09 (m, 2H); 13C NMR (150 MHz, CDCl3) δ 30.04 (CH2), 34.7 (CH2), 44.8 (CH2), 77.1 (CH), 128.4 (CH), 129.3 (CH), 129.9 (CH), 133.4 (CH), 165.1 (C), 201.5 (C). (R)-2-Oxocycloheptyl Benzoate10 (3g) (Table 5, entry 11). The reaction was carried out following the general procedure. The title compound was isolated as a white solid by column chromatography (hexane/EtOAc = 85/15) in 60% yield and >99% ee. HPLC analysis on a Chiralcel OD-H column: 95/5 hexane/i-PrOH, flow rate 0.800 mL/min, λ = 254 nm: τmajor = 10.15 min, τminor = 12.96 min; ESI-MS: 233 (M + 1)+, 255 (M + Na)+. [α]20D = −33.7 (c 0.97, CHCl3, >99% ee). 1H NMR (400 MHz, CDCl3) δ 1.38−1.51 (m, 1H), 1.65−1.99 (m, 6H), 2.13 (m, 1H), 2.51 (m, 1H), 2.70 (m, 1H), 5.46 (dd, 1H, J = 9.7 Hz, J = 3.5 Hz), 7.45 (m, 2H), 7.57 (m, 1H), 8.08 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 23.0 (CH2), 26.4 (CH2), 28.4 (CH2),

30.4 (CH2), 40.7 (CH2), 79.0 (CH), 128.4 (CH), 129.7 (C), 129.8 (CH), 133.1 (CH), 165.9 (C), 207.3 (C). (R)-2-Oxocyclooctyl Benzoate10 (3h) (Table 5, entry 12). The reaction was carried out following the general procedure. The title compound was isolated as a white solid by column chromatography (pentane/Et2O = 90/10) in 96% yield and 93% ee. HPLC analysis on a Chiralcel OD-H column: 90/10 hexane/i-PrOH, flow rate 0.750 mL/min, λ = 214 nm: τmajor = 8.15 min, τminor = 9.89 min; ESI-MS: 247 (M + 1)+, 269 (M + Na)+. [α]20D = −30.7 (c 0.95, CHCl3, 93% ee). 1H NMR (400 MHz, CDCl3) δ 1.18−1.33 (m, 2H), 1.49−1.75 (m, 4H), 1.80−2.13 (m, 4H), 2.27−2.37 (m, 1H), 2.42 (ddd, J = 14.1 Hz, J = 9.0 Hz, J = 3.5 Hz, 1H), 2.74 (ddd, J = 14.1 Hz, J = 9.4 Hz, J = 3.5 Hz, 1H), 5.42 (dd, J = 8.6 Hz, J = 3.7 Hz, 1H), 7.39−7.48 (m, 2H), 7.53−7.60 (m, 1H), 8.03−8.14 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 22.1, 24.7, 24.8, 27.7, 31.5, 40.7, 77.6, 128.6, 129.8, 130.0, 133.5, 166.2, 211.8. (R)-tert-Butyl 3-(Benzoyloxy)-4-oxopiperidine-1-carboxylate9 (3i) (Table 5, entry 13). The reaction was carried out following the general procedure. The title compound was isolated as a pale yellow oil by column chromatography (hexane/acetone = gradient 5%−15% acetone) in 49% yield and 80% ee. HPLC analysis on a Chiralcel AD-H column: 90/10 hexane/i-PrOH, flow rate 0.700 mL/min, λ = 254 nm: τmajor = 12.65 min, τminor = 14.47 min; ESI-MS: 320 (M + 1)+, 343 (M + Na)+. [α]20D = +22.1 (c 0.83, CHCl3, 80% ee). 1H NMR (400 MHz, CDCl3) δ 1.49 (s, 9H), 2.49−2.80 (m, 2H), 3.04−3.58 (m, 2H), 4.11−4.79 (m, 2H), 5.36 (dd, J = 10.5 Hz, J = 6.5 Hz, 1H), 7.38−7.50 (m, 2H), 7.53−7.64 (m, 1H), 8.0−8.15 (m, 2H); 13 C NMR (100 MHz, CDCl3) δ 28.5, 40.7, 43.9 (broad signal), 48.1 (broad signal), 74.1, 81.4, 128.7, 129.3, 130.2, 133.7, 154.4, 165.3, 201.7. General Procedure for the Benzoyloxylation of 1-Indanones. All reactions were carried out in undistilled toluene. In an ordinary vial equipped with a Teflon-coated stir bar, catalyst F (0.04 mmol, 20 mol %) was dissolved in 1.0 mL of toluene, and 2 hydroxybenzoic acid (0.08 mmol, 40 mol %) was added. The resulting solution was stirred at 0 °C for 10 min. 1-Indanone derivative (2.5 equiv) was added, followed by the addition of the dibenzoyl peroxide (0.2 mmol) and Na2CO3 (1.2 equiv) at 0 °C. Stirring was continued for 80 h. The crude mixture was diluted with CH2Cl2 and flushed through a short plug of silica, using dichloromethane/ethyl acetate 1:1 as the eluent (20 mL). Solvent was removed in vacuo. Crude product was purified by flash column chromatography using dichloromethane/diethyl ether 99:1 as the eluent mixture. (R)-1-Oxo-2,3-dihydro-1H-inden-2-yl Benzoate (5a) (Table 6, entry 1). The reaction was carried out following the general procedure. The title compound was isolated as a white solid by column chromatography (dichloromethane/diethyl ether = 99/1) in 80% yield and 84% ee. HPLC analysis on a Chiralcel OD-H column: 90/10 hexane/i-PrOH, flow rate 0.75 mL/min, λ = 214 nm: τmajor = 13.48 min, τminor = 14.72 min; HRMS (ESI+) calcd for C16H13O3 253.0859, found 253.0857. Mp (DSC, 2 °C/min): 70 °C. [α]20D = −56.1 (c 0.82, CHCl3, 84% ee). 1H NMR (400 MHz, CDCl3) δ 3.20 (dd, 1H, J = 17.1 Hz, J = 4.7 Hz), 3.77 (dd, 1H, J = 16.9 Hz, J = 8.0 Hz), 5.65 (dd, 1H, J = 8.0 Hz, J = 4.8 Hz), 7.40−7.51 (m, 4H), 7.58 (m, 1H), 7.67 (td, 1H, J = 7.5 Hz, J = 1.2 Hz), 7.84 (bd, 1H, J = 7.7 Hz), 8.10 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 33.6 (CH2), 74.4 (CH), 124.5 (CH), 126.7 (CH), 128.1 (CH), 128.4 (CH), 129.3 (C), 133.4 (CH), 134.6 (C), 135.9 (CH), 150.4 (C), 166.0 (C), 200.4 (C). (R)-5-Bromo-1-oxo-2,3-dihydro-1H-inden-2-yl Benzoate (5b) (Table 6, entry 2). The reaction was carried out following the general procedure. The title compound was isolated as a white solid by column chromatography (dichloromethane/diethyl ether = 99/1) in 66% yield and 80% ee. HPLC analysis on a Chiralcel OD-H column: 98/2 hexane/i-PrOH, flow rate 0.850 mL/min, λ = 254 nm: τmajor = 37.63 min, τminor = 33.61 min; HRMS (ESI−) calcd for C16H10BrO3 328.9892, 330.9871, found 328.9890, 330.9869. [α]20D = −3.7 (c 1.0, CHCl3, 80% ee). 1H NMR (400 MHz, CDCl3) δ 3.20 (m, 1H), 3.75 (m, 1H), 5.60 (dd, 1H, J = 8.0 Hz, J = 4.8 Hz), 7.45 (m, 2H), 7.56−7.62 (m, 2H), 7.66−7.72 (m, 2H), 8.09 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 33.2 (CH2), 74.2 (CH), 125.7 (CH), 128.5 2672

dx.doi.org/10.1021/jo2024976 | J. Org. Chem. 2012, 77, 2667−2674

The Journal of Organic Chemistry

Article

321.0660, found 321.0662. Mp: 92.6−94.0 °C. [α]20D = −13.5 (c 0.66, CHCl3, 40% ee). 1H NMR (400 MHz, CDCl3) δ 3.34 (dd, J = 17.8 Hz, J = 4.8 Hz, 1H), 3.99 (m, 1H), 5.64 (dd, J = 8.1 Hz, J = 4.8 Hz, 1H), 7.46 (m, 2H), 7.60 (m, 2H), 7.94 (d, J = 8.0 Hz, 1H), 8.03 (d, J = 7.6 Hz, 1H), 8.07−8.12 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 32.3 (CH2), 73.8 (CH), 123.5 (q, JC−F = 273.5 Hz, C), 127.9 (CH), 128.5 (CH), 128.6 (CH), 128.6 (q, JC−F = 32.7 Hz, C), 129.0 (C), 130.1 (CH), 132.3 (q, JC−F = 5.0 Hz, CH), 133.6 (CH), 133.6 (CH), 136.0 (C), 147.7 (C), 165.9 (C), 199.17 (C). Synthesis of cis-(1S,2R)-6b and trans-(1R,2R)-7b. Compound 5b (40 mg, 0.12 mmol, 80% ee) was dissolved in 2 mL of a 1:3 solution of MeOH/THF and stirred at room temperature for several minutes. Then 3 equiv (13.7 mg, 0.36 mmol) of solid NaBH4 was added at 0 °C, and stirring was continued until the disappearance of 5b was observed (15 min, checked by TLC). The reaction was then placed in an oil bath at 50 °C in a sealed tube for 18 h. The crude mixture was diluted with dichloromethane and treated with a saturated aqueous solution of Na2CO3. The organic phase was separated, and the aqueous phase was extracted two times with dichloromethane. Organic phases were collected and dried over MgSO4, and the solvent was removed under reduced pressure. The crude mixture was analyzed by NMR (dr = 4:1 in favor of cis-6b) and purified by column chromatography using hexane/acetone 75/25 as the eluent mixture to give cis-(1S,2R)-6b in 53% yield and 84% ee. HPLC analysis on a Chiralcel OJ-H column: 90/10 hexane/i-PrOH, flow rate 0.600 mL/ min, λ = 214 nm: τminor = 17.17 min, τmajor = 18.96 min; and trans(1R,2R)-7b in a 25% yield and 80% ee HPLC analysis on a Lux Amylose-2 column: 95/5 hexane/i-PrOH, flow rate 0.700 mL/min, λ = 230.16 nm: τmajor = 34.66 min, τminor = 32.42 min. [α]20D cis-(1S,2R)6b = −5.3 (c 0.57, acetone, 84% ee). HRMS (ESI−) calcd for C9H8BrO2 226.9713, 228.9693, found 226.9711, 228.9690. Mp cis(1S,2R)-6b: 123.0−124.5 °C. Mp trans-(1S,2R)-7b: 187.0−189.4 °C. 1 H NMR (400 MHz, CDCl3) cis-(1S,2R)-6b δ 2.84 (dd, 1H, J = 16.5 Hz, J = 3.1 Hz), 3.03 (dd, 1H, J = 16.5 Hz, J = 5.6 Hz), 3022 (d, 1H, J = 4.6 Hz), 3.55 (d, 1H, J = 7.0 Hz), 4.38 (m, 1H), 4.87 (m, 1H), 7.26−7.31 (m, 2H), 7.37−7.44 (m, 1H); 13C NMR (100 MHz, CDCl3) cis-(1S,2R)-6b δ 38.9 (CH2), 74.0 (CH), 75.9 (CH), 118.3 (C), 122.1 (C), 127.5 (CH), 129.0 (CH), 130.5 (CH), 143.7 (C), 144.5 (C). 1H NMR (400 MHz, CD3CN, poor solubility) trans(1R,2R)-7b δ 2.69 (dd, 1H, J = 16.0 Hz, J = 6.8 Hz), 3.17 (m, 1H), 3.39 (d, 1H, J = 5.0 Hz), 3.60 (d, 1H, J = 6.0 Hz), 4.19 (m, 1H), 4.76 (m, 1H), 7.24 (m, 2H), 7.37−7.43 (m, 3H); 13C NMR (100 MHz, CD3CN) δ 38.5 (CH2), 81.2 (CH), 82.5 (CH), 118.3 (C), 122.0 (C), 127.1 (CH), 128.7 (CH), 130.6 (CH), 143.4 (C), 143.6 (C).

(CH), 129.1 (C), 130.0 (CH), 131.3 (C), 131.9 (CH), 133.4 (C), 133.5 (CH), 151.9 (C), 166.0 (C), 199.2 (C). (R)-5-Fluoro-1-oxo-2,3-dihydro-1H-inden-2-yl Benzoate (5c) (Table 6, entry 3). The reaction was carried out following the general procedure. The title compound was isolated as a white solid by column chromatography (dichloromethane/diethyl ether = 99/1) in 55% yield and 79% ee. HPLC analysis on a Chiralpak AD-H column: 90:10 hexane/i-PrOH, flow rate 0.75 mL/min, λ = 254 nm: τmajor = 20.37 min, τminor = 22.98 min; HRMS (ESI+) calcd for C16H12FO3 271.0765, found 271.0763. Mp (DSC, 2 °C/min): 119 °C. [α]20D = −40.5 (c 0.89, CHCl3, 79% ee). 1H NMR (400 MHz, CDCl3) δ 3.19 (m, 1H), 3.76 (m, 1H), 5.62 (dd, 1H, J = 8.0 Hz, J = 4.7 Hz), 7.11−7.19 (m, 2H), 7.45 (m, 2H), 7.59 (m, 1H), 7.86 (m, 1H), 8.09 (m, 1H); 13C NMR (100 MHz, CDCl3) δ 33.5 (d, CH2, J = 1.7 Hz), 74.3 (CH), 113.5 (d, CH, JC−F = 22.7 Hz), 116.6 (d, CH, JC−F = 23.7 Hz), 127.0 (d, CH, JC−F = 10.6 Hz), 128.4 (CH), 129.2 (C), 130.0 (CH), 131.1 (d, C, JC−F = 1.6 Hz), 133.5 (CH), 153.3 (d, C, JC−F = 10.5 Hz), 166.0 (C), 166.5 (C), 169.1 (C), 198.6 (C). (R)-5-Methoxy-1-oxo-2,3-dihydro-1H-inden-2-yl Benzoate (5d) (Table 6, entry 4). The reaction was carried out following the general procedure. The title compound was isolated as a white solid by column chromatography (dichloromethane/diethyl ether = 99/1) in 30% yield and 77% ee. HPLC analysis on a Chiralpak AD-H column: 80/20 hexane/i-PrOH, flow rate 1.00 mL/min, λ = 254 nm: τmajor = 14.88 min, τminor = 22.27 min; HRMS (ESI+) calcd for C17H15O4 283.0965, found 283.0963. Mp (DSC, 2 °C/min): 140 °C. [α]20D = −6.4 (c 0.45, CHCl3, 77% ee).1H NMR (400 MHz, CDCl3) δ 3.13 (dd, 1H, J = 17.0 Hz, J = 4.5 Hz), 3.73 (dd, 1H, J = 16.9 Hz, J = 7.7 Hz), 3.91 (s, 3H), 5.63 (dd, 1H, J = 7.8 Hz, J = 4.5 Hz), 6.90 (bs, 1H), 6.97 (m, 1H), 7.45 (m, 2H), 7.58 (m, 1H), 7.78 (d, 1H, J = 8.5 Hz), 8.10 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 33.9 (CH2), 55.8 (CH3), 74.5 (CH), 109.8 (CH), 116.2 (CH), 126.6 (CH), 127.9 (C), 128.4 (CH), 129.4 (CH), 130.0 (CH), 133.4 (CH), 153.6 (C), 166.1 (C), 166.2 (C), 198.5 (C). (R)-6-Methyl-1-oxo-2,3-dihydro-1H-inden-2-yl Benzoate (5e) (Table 6, entry 5). The reaction was carried out following the general procedure. The title compound was isolated as a white solid by column chromatography (dichloromethane/diethyl ether = 99/1) in 82% yield and 60% ee. HPLC analysis on a Chiralcel OD-H column: 90/10 hexane/i-PrOH, flow rate 0.75 mL/min, λ = 254 nm: τmajor = 12.19 min, τminor = 14.38 min; HRMS (ESI+) calcd for C17H15O3 267.1016, found 267.1014. Mp (DSC, 2 °C/min): 85 °C. [α]20D = −53.3 (c 0.97, CHCl3, 60% ee). 1H NMR (400 MHz, CDCl3) δ 2.43 (s, 3H), 3.14 (dd, 1H, J = 16.9 Hz, J = 4.8 Hz), 3.72 (dd, 1H, J = 17.0 Hz, J = 8.2 Hz), 5.64 (dd, 1H, J = 8.0 Hz, J = 4.8 Hz), 7.34−7.39 (m, 1H), 7.41− 7.51 (m, 3H), 7.58 (m, 1H), 7.64 (bs, 1H), 8.09 (m, 2H); 13C NMR (100 MHz, CDCl3) δ 21.1 (CH3), 33.2 (CH2), 74.7 (CH), 124.4 (CH), 126.3 (CH), 128.4 (CH), 129.4 (C), 130.0 (CH), 133.3 (CH), 134.7 (C), 137.1 (CH), 138.2 (C), 147.7 (C), 166.0 (C), 200.5 (C). (R)-5-Chloro-1-oxo-2,3-dihydro-1H-inden-2-yl Benzoate (5f) (Table 6, entry 6). The reaction was carried out following the general procedure. The title compound was isolated as a white solid by column chromatography using dichloromethane as the eluent in 68% yield and 76% ee. HPLC analysis on a Chiralcel AD-H column: 80/20 hexane/iPrOH, flow rate 0.750 mL/min, λ = 254 nm: τmajor = 15.99 min, τminor = 20.12 min; HRMS (ESI+) calcd for C16H12ClO3 287.0397, found 287.0395. Mp: 162.1−163.2 °C. [α]20D = −10.5 (c 0.78, CHCl3, 76% ee). 1H NMR (400 MHz, CDCl3) δ 3.18 (dd, J = 17.4 Hz, J = 4.9 Hz, 1H), 3.74 (dd, J = 17.4 Hz, J = 8.2 Hz, 1H), 5.6 (dd, J = 8.1 Hz, J = 4.8 Hz, 1H), 7.39−7.51 (m, 1H), 7.56−7.63 (m, 1H), 7.77 (d, J = 8.5 Hz, 2H), 8.07−8.11 (m, 4H); 13C NMR (100 MHz, CDCl3) δ 33.5, 74.5, 125.9, 127.9, 127.1, 128.7, 129.3, 129.4, 130.2, 133.3, 133.7, 142.7, 152.0, 166.1, 199.2. (R)-1-Oxo-4-(trifluoromethyl)-2,3-dihydro-1H-inden-2-yl Benzoate (5g) (Table 6, entry 7). The reaction was carried out following the general procedure. The title compound was isolated as a pale yellow solid by column chromatography (hexane/Et2O = 9:1) in 37% yield and 40% ee. HPLC analysis on a Chiralcel AD-H column: 92/8 hexane/i-PrOH, flow rate 0.700 mL/min, λ = 254 nm: τmajor = 13.03 min, τminor = 14.29 min; HRMS (ESI+) calcd for C17H12F3O3

■

ASSOCIATED CONTENT

S Supporting Information *

General experimental procedures, 1H and 13C NMR spectra, characterization data, and HPLC traces for compounds 3a−i, 5a−g, 6b, and 7b. This material is available free of charge via the Internet at http://pubs.acs.org.

■

AUTHOR INFORMATION

Corresponding Author

*E-mail: [email protected]. Notes

The authors declare no competing financial interest.

■

ACKNOWLEDGMENTS This paper is dedicated to Prof. Giuseppe Bartoli on the occasion of his 70th birthday. We acknowledge Prof. Francesco Gasparrini and Dr. Alessia Ciogli for the HRMS analysis. We acknowledge Dr. Tiziana Benelli for the DSC analysis. We acknowledge financial support from Bologna University and from MIUR National Project “Stereoselezione in Sintesi Organica. Metodologie ed Applicazioni”. 2673

dx.doi.org/10.1021/jo2024976 | J. Org. Chem. 2012, 77, 2667−2674

The Journal of Organic Chemistry

■

Article

N.; Shaka, A. J. J. Magn. Reson. 1997, 125, 302. (c) Van, Q. N.; Smith, E. M.; Shaka, A. J. J. Magn. Reson. 1999, 141, 191. (d) See also: Claridge, T. D. W. High Resolution NMR Techniques in Organic Chemistry; Pergamon: Amsterdam, 1999. (14) Gottlieb, H. E.; Kotlyar, V.; Nudelman, A. J. Org. Chem. 1997, 62, 7512. (15) Still, W. C.; Kahn, M.; Mitra, A. J. J. Org. Chem. 1978, 43, 2923. (16) Armarengo, W. L. F.; Perrin, D. D. In Purification of Laboratory Chemicals, 4th ed.; Butterworth Heinemann: Oxford, 1996. (17) Fu, J.-Y.; Huang, Q.-C.; Wang, Q.-W.; Wang, L.-X.; Xu, X.-Y. Tetrahedron Lett. 2010, 51, 4870. (18) McCooey, S. H.; Connon, S. J. Org. Lett. 2007, 9, 599. (19) (a) Feng, X.; Shu, L.; Shi, Y. J. Org. Chem. 2002, 67, 2831. (20) Beshara, C. S.; Hall, A.; Jenkins, R. L.; Jones, K. L.; Jones, T. C.; Killeen, N. M.; Taylor, P. H.; Thomas, S. P.; Tomkinson, N. C. O. Org. Lett. 2005, 7, 5729.

REFERENCES

(1) (a) For selected review of α-oxydation of carbonyl compound through organocatalysis see: Guillena, G.; Ramon, D. J. Curr. Org. Chem. 2011, 15, 296. (b) Xu, L. W.; Li, L.; Shia, Z. H. Adv. Synth. Catal. 2010, 352, 243. (2) (a) Brown, S. P.; Brochu, M. P.; Sinz, C. J.; MacMillan, D. W. C. J. Am. Chem. Soc. 2003, 125, 10808. (b) Hayashi, Y.; Yamaguchi, J.; Hibino, K.; Shoji, M. Tetrahedron Lett. 2003, 44, 8293. (c) Zhong, G. Angew. Chem., Int. Ed. 2004, 42, 4247. (d) Hayashi, Y.; Yamaguchi, J.; Sumiya, T.; Hibino, K.; Shoji, M. J. Org. Chem. 2004, 69, 5966. (e) Bøgevig, A.; Sundén, H.; Cordova, A. Angew. Chem., Int. Ed. 2004, 43, 1109. (f) Hayashi, Y.; Yamaguchi, J.; Sumiya, T.; Shoji, M. Angew. Chem., Int. Ed. 2004, 43, 1112. (g) Kano, T.; Mii, H.; Maruoka, K. J. Am. Chem. Soc. 2009, 131, 3450. (h) Gotoh, H.; Hayashi, Y. Chem. Commun. 2009, 3083. (i) Vaismaa, M. J. P.; Yau, S. C. Y.; Tomkinson, N. C. O. Tetrahedron Lett. 2009, 50, 3625. (3) (a) Bartoli, G.; Melchiorre, P. Synlett 2008, 12, 1759. (b) Chen, Y. C. Synlett 2008, 13, 1919. (4) For selected examples see: (a) M.; Bartoli, G.; Bosco, M.; Carlone, A.; Pesciaioli, F.; Sambri, L.; Melchiorre, P. Org. Lett. 2007, 9, 1403. (b) Carlone, A.; Bartoli, G.; Bosco, M.; Pesciaioli, F.; Ricci, P.; Sambri, L.; Melchiorre, P. Eur. J. Org. Chem. 2007, 5492. (c) Ricci, P.; Carlone, A.; Bartoli, G.; Bosco, M.; Sambri, L.; Melchiorre, P. Adv. Synth. Catal. 2008, 350, 49. (d) Pesciaioli, F; De Vincentiis, F.; Galzerano, P.; Bencivenni, G.; Bartoli, G.; Mazzanti, A.; Melchiorre, P. Angew. Chem., Int. Ed. 2008, 47, 8703. (e) Wang, X.; Reisinger, C. M.; List, B. J. Am. Chem. Soc. 2008, 130, 6070. (f) Lifchits, O.; Reisinger, C. M.; List, B. J. Am. Chem. Soc. 2010, 132, 10227. (g) Xie, J. W.; Chen, W.; Li, R.; Zeng, M.; Du, W.; Yue, L.; Chen, Y. C.; Wu, Y.; Zhu, J.; Deng, J. G. Angew. Chem., Int. Ed. 2007, 46, 389. (h) Xie, J. W.; Yue, L.; Chen, W.; Du, W.; Zhu, J.; Deng, J. G.; Chen, Y. C. Org. Lett. 2007, 9, 413. (i) Pesciaioli, F.; Tian, X.; Bencivenni, G.; Bartoli, G.; Melchiorre, P. Synlett 2010, 11, 1704. (j) Li, X.; Cun, L.; Lian, C.; Zhong, L.; Chen, Y.; Liao, J.; Zhu, J.; Deng, J. Org. Biomol. Chem. 2008, 6, 349. (5) For selected examples see: (a) Kwiatkowski, P.; Beeson, T. D.; Conrad, J. C.; MacMillan, D. W. C. J. Am. Chem. Soc. 2011, 133, 1738. (b) Liu, C.; Zhu, Q.; Huang, K. W.; Lu, Y. Org. Lett. 2011, 13, 2638. (c) McCooey, S. H.; Connon, S. J. Org. Lett. 2007, 9, 599. (d) Zhu, Q.; Lu, Y. Chem. Commun. 2010, 46, 2235. (e) Rodrigo, E.; Morales, S.; Duce, S.; Ruano, J. L. G.; Cid, M. B. Chem. Commun. 2011, 47, 11267. (6) (a) Bencivenni, G.; Galzerano, P.; Mazzanti, A.; Bartoli, G.; Melchiorre, P. Proc. Natl. Acad. Sci. U.S.A. 2010, 107, 20642. (b) Bergonzini, G.; Vera, S.; Melchiorre, P. Angew. Chem., Int. Ed. 2010, 49, 9879. (7) (a) Wu, L. Y.; Bencivenni, G.; Mancinelli, M.; Mazzanti, A.; Bartoli, G.; Melchiorre, P. Angew. Chem., Int. Ed. 2009, 48, 7196. (b) Bencivenni, G.; Wu, L. Y.; Mazzanti, A.; Giannichi, B.; Pesciaioli, F.; Song, M. P.; Bartoli, G.; Melchiorre, P. Angew. Chem., Int. Ed. 2009, 48, 7200. (c) Galzerano, P.; Pesciaioli, F.; Mazzanti, A.; Bartoli, G.; Melchiorre, P. Angew. Chem., Int. Ed. 2009, 48, 7892. (8) (a) Mukherjee, S.; Yang, J. W.; Hoffmann, S.; List, B. Chem. Rev. 2007, 107, 5471. (b) List, B. Synlett 2001, 1675. (c) List, B. Acc. Chem. Res. 2004, 37, 548. (9) During the draft of the present work the following paper reporting the same kind of reaction but using different reaction conditions appeared: Lifchits, O.; Demoulin, N.; List, B. Angew. Chem., Int. Ed. 2011, 50, 9680. (10) (a) Zhu, Y.; Shu, L.; Tu, Y.; Shi, Y. J. Org. Chem. 2001, 66, 1818. (b) Zhu, Y.; Manske, K. J.; Shi, Y. J. Am. Chem. Soc. 1999, 121, 4080. (11) The relative configuration for cis- and trans-isomers for compounds 3b and 3c was determined by means of NOESY-1D NMR experiments to be cis-3b: (1R,4S); trans-3b: (1R,4R); cis-3c: (1R,5R); trans-3c: (1R,5S). (12) The relative configuration for cis- and trans-isomers for compounds 6b and 7b was determined by means of NOESY-1D NMR experiments. (13) (a) Stott, K.; Stonehouse, J.; Keeler, J.; Hwand, T.-L.; Shaka, A. J. J. Am. Chem. Soc. 1995, 117, 4199. (b) Stott, K.; Keeler, J.; Van, Q.

■

NOTE ADDED AFTER ASAP PUBLICATION The toc/abstract graphic and Figure 1 contained errors in the version published ASAP February 29, 2012. The correct version reposted March 2, 2012.

2674

dx.doi.org/10.1021/jo2024976 | J. Org. Chem. 2012, 77, 2667−2674