Enantioselective Ruthenium-Catalyzed ... - ACS Publications

May 31, 2018 - Hydrogenative Coupling for Type II Polyketide Construction. Brett R. Ambler, ... In connection with studies of transfer hydrogenative C...
3 downloads 0 Views 1MB Size
Communication pubs.acs.org/JACS

Cite This: J. Am. Chem. Soc. XXXX, XXX, XXX−XXX

Enantioselective Ruthenium-Catalyzed Benzocyclobutenone−Ketol Cycloaddition: Merging C−C Bond Activation and Transfer Hydrogenative Coupling for Type II Polyketide Construction Brett R. Ambler,# Ben W. H. Turnbull,# Sankar Rao Suravarapu,# Maulen M. Uteuliyev, Nancy O. Huynh, and Michael J. Krische* University of Texas at Austin, Department of Chemistry, Austin, Texas 78712 United States Downloaded via UNIV OF SUSSEX on July 11, 2018 at 14:30:40 (UTC). See https://pubs.acs.org/sharingguidelines for options on how to legitimately share published articles.

S Supporting Information *

Table 1. Selected Optimization Experiments in the Enantioselective Intermolecular Ruthenium-Catalyzed Cycloaddition of Benzocyclobutenonesa

ABSTRACT: The first enantioselective intermolecular metal-catalyzed cycloadditions of benzocyclobutenones via C−C bond oxidative addition are described. In the presence of a ruthenium(0) complex modified by (R)-DM-SEGPHOS, tetralone-derived ketols and benzocyclobutenones combine to form cycloadducts with complete regio- and diastereoselectivity and high enantioselectivity. Using this method, the “bay region” substructure of the angucycline natural product arenimycin was prepared.

F

ollowing the pioneering work by Liebeskind,1,2 Jun,3 and Murakami,4 the insertion of π-bonds into metallacycles obtained through C−C bond oxidative addition has matured into an active area of research.5 Despite substantial progress in this field, several key challenges persist. The use of directing groups is often required to overcome the kinetic and thermodynamic barriers posed by the activation of relatively strong and stable C−C bonds. Many C−C bond activation initiated C−C couplings are restricted to intramolecular processes. Finally, beyond reactions of donor−acceptor cyclopropanes,6,7 enantioselective intermolecular metal-catalyzed C−C bond activation initiated C−C couplings are exceptionally uncommon.8 In connection with studies of transfer hydrogenative C−C bond formation,9 we recently developed a novel class of ruthenium(0)-catalyzed cycloadditions of vicinal diols, ketols or diones.9d,10 These processes operate through a common mechanistic motif wherein oxidative formation of ruthenium(II) metallacycles, which is accompanied or triggered by dione addition, is followed by diol- or ketol-mediated transfer hydrogenolysis of the ruthenacycle to release product and regenerate the reactive dione (Figure 1).9d Recently, we found that

a

Yields are of material isolated by silica gel chromatography. Enantioselectivity values were determined by HPLC analysis on a chiral stationary phase. (R)-SEGPHOS (Ar = phenyl). bReaction was conducted from the diol oxidation level, 1a−1c (200 mol%). c 1c (130 mol%), (R)-DM-SEGPHOS (Ar = 3,5-xylyl). See the Supporting Information for further experimental details.

ruthenacycles obtained via C−C bond oxidative addition to benzocyclobutenones are catalytically competent in transformations of this type, providing a kinetic pathway for the insertion of adjacent carbon atoms of vicinal diols, ketols or diones into C−C σ-bonds.10i On the basis of this finding, we now report the first examples of enantioselective intermolecular metal-catalyzed cycloadditions of benzocyclobutenones.11−14 In an initial set of experiments (Table 1), a series of benzocyclobutenone derivatives 1a−1d were exposed to equimolar quantities of tetralone-derived ketols 2a−2c (or diols) in the presence of the mononuclear ruthenium(0) catalyst15 derived from Ru3(CO)12 and (R)-SEGPHOS in m-xylene (1 M) at 150 °C. The reaction of unsubstituted benzocyclobutenone 1a with unsubstituted diol 2a led to the formation of cycloadduct 3a with complete regio- and diastereoselectivity but in nearly Received: May 31, 2018

Figure 1. General catalytic mechanism for ruthenium(0)-catalyzed cycloaddition of diols, ketols or diones. © XXXX American Chemical Society

A

DOI: 10.1021/jacs.8b05724 J. Am. Chem. Soc. XXXX, XXX, XXX−XXX

Communication

Journal of the American Chemical Society Table 2. Enantioselective Intermolecular Ruthenium(0)Catalyzed Cycloaddition of Benzocyclobutenones 1c, 1e−1l with Ketols 2c−2f To Form Cycloadducts 3h−3sa

Scheme 1. Arenimycins A−D and Collinone, Antibacterial Angucyclines That Incorporate a Bridgehead Diol Motif, and Reaction of Benzocyclobutenone 1c with Ketol 2g To Form Cycloadduct 3ta

a

For structurally related angucycline natural products, SF22446A1−A3 and SF22446B1−B3, see ref 19. Reaction was performed on 0.20 mmol scale. Yield of material isolated by silica gel chromatography. Enantioselectivities were determined by chiral stationary phase HPLC analysis. See Supporting Information for further experimental details. a

All reactions were performed on a 0.20 mmol scale. Yield of material isolated by silica gel chromatography. Enantioselectivities were determined by chiral stationary phase HPLC analysis. See the Supporting Information for further experimental details. bX-ray structure obtained after removal of silyl ether (3h′). cReaction time = 36 h.

Retaining key structural features required to enforce high levels of asymmetric induction, an otherwise diverse set of benzocyclobutenones 1c, 1e−1l, were reacted with ketol 2c to furnish cycloadducts 3h−3p. In each case, complete regio- and diastereoselectivity were accompanied by excellent levels of enantiomeric enrichment. The formation of 3o and 3p illustrates tolerance of activated aryl chlorides. Variation of the ketol partner also was explored. As demonstrated by the formation of cycloadducts 3q−3s, electron-releasing substituents that reside in a para-relationship with respect to the ketone improve enantioselectivity, precluding the need for an ortho-benzyloxy-group. For example, in the formation of cycloadduct 3r, a 99:1 enantiomeric ratio is observed. The formation of 3r also demonstrates compatibility with amine functional groups. Underscoring the utility of this method vis-à-vis construction of type II polyketides, in particular, the angucycline antibiotics arenimycins A−D, collinone and SF22446A1−A3/ SF22446B1−B3,16−19 benzocyclobutenone 1c was exposed to ketol 2g under standard conditions for ruthenium-catalyzed cycloaddition (Scheme 1). Cycloadduct 3t was formed in good yield and incorporates the highly congested “bay region” motif found in arenimycin. To further demonstrate relevance to type II polyketide construction, cycloadduct 3h was subjected to silyl-deprotection followed by oxidation of the resulting alcohol to form dione 4h (eq 1):

racemic form (Table 1, entry 1). However, using the corresponding ortho-methoxy-substituted benzocyclobutenone, 1b, cycloadduct 3b was formed with significant levels of enantiomeric enrichment (Table 1, entry 2). On the basis of this result, an effort was made to define substituents that would both enforce optimal levels of enantiomeric enrichment and facilitate entry to naturally occurring type II polyketides of the angucycline class (vide infra). Toward this end, incorporation of a triisopropylsilyl (TIPS) ether at C2 of the benzocyclobutenone, as in 1c, and for the ketol partner, a benzyloxy substituent at C8, as in 2c, conspired to improve the degree of asymmetric induction. Thus, the reaction of benzocyclobutenone 1c and ketol 2c delivered cycloadduct 3h with complete regio- and diastereoselectivity as a 94:6 ratio of enantiomers (Table 1, entry 8). Finally, using (R)-DM-SEGPHOS as ligand and a slight excess of benzocyclobutenone 1c, cycloadduct 3h was generated in 96% yield as a single regio- and diastereomer as a 97:3 ratio of enantiomers (Table 1, entry 9). The scope of the enantioselective ruthenium-catalyzed benzocyclobutenone-ketol cycloaddition was evaluated (Table 2). B

DOI: 10.1021/jacs.8b05724 J. Am. Chem. Soc. XXXX, XXX, XXX−XXX

Communication

Journal of the American Chemical Society

ruthenaindanone formation accounts for structural features of the benzocyclobutenone that are required to enforce high levels of enantioselectivity, specifically, nonbonded interactions between the methoxy and triisopropylsiloxy groups of the α-oxo-ortho-quinodimethane with the xylyl moieties of DM-SEGPHOS. In summary, we report the first enantioselective intermolecular metal-catalyzed cycloadditions of benzocyclobutenones via C−C bond oxidative addition. Using a mononuclear15 ruthenium(0) complex derived from Ru3(CO)12 and (R)-DMSEGPHOS, tetralone-derived ketols and benzocyclobutenones react to form cycloadducts with complete regio- and diastereoselectivity and high enantioselectivity. Whereas the majority of methods for convergent type II polyketide construction require use of stoichiometric carbanions under cryogenic conditions (e.g., the Hauser-Kraus annulation,23,24 aryne-mediated cycloadditions),25 the present method assembles type II polyketide motifs in the absence of stoichiometric byproducts under noncryogenic conditions. In an initial synthetic application, this method was used to prepare the congested “bay region” substructure characteristic of the angucycline antibiotics arenimycin, collinone and SF22446A1−A3/SF22446B1−B3.16−19 Future studies are aimed at defining ketol partners for the synthesis of linear tetracycline antibiotics.26

Additionally, cycloadduct 3o was subjected to an SNAr reaction to form compound 4o, which incorporates a dimethylamino motif (eq 2). Dimethylamino groups frequently occur in type II polyketide antibiotics (e.g., the tetracyclines), and as recently demonstrated by Hergenrother, introduction of unhindered amines endows certain rigid Gram-(+) only antibacterials with Gram-(−) activity by conferring membrane permeability.20 Finally, the ability to achieve high levels of enantioselectivity in cycloadditions of chiral racemic benzocyclobutenones 1c, 1e−1l, has implications regarding the nature of the C−C bond oxidative addition event. High levels of enantiomeric enrichment persist at equimolar loadings of benzocyclobutenone and ketol (Table 1, entry 8) and do not depend on stoichiometry, which suggests kinetic resolution of benzocyclobutenones 1c, 1e−1l, is not operative. Rather, these data corroborate a catalytic mechanism wherein stereoablative cycloreversion to form a discrete α-oxo-ortho-quinodimethane or “ortho-quinoid ketene methide”21 is followed by enantiodetermining C−C bond oxidative addition to form a ruthenaindanone complex (Figure 2).22 The indicated stereochemical model for



ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/jacs.8b05724.



Experimental procedures and spectral data. HPLC traces of racemic and enantiomerically enriched products. Crystallographic data for 3h′ (PDF)

AUTHOR INFORMATION

Corresponding Author

*[email protected] ORCID

Michael J. Krische: 0000-0001-8418-9709 Author Contributions #

B.R.A., B.W.H.T., and S.R.S. contributed equally to this work.

Notes

The authors declare no competing financial interest.



ACKNOWLEDGMENTS The Robert A. Welch Foundation (F-0038), the NIH-NIGMS (RO1-GM093905). Dr. Ping-Xin Zhou is acknowledged for technical assistance. The Swiss National Science Foundation (SNSF) is acknowledged for early postdoctoral mobility fellowship (SRS, P2BEP2_172231).



REFERENCES

(1) Huffman, M. A.; Liebeskind, L. S. J. Am. Chem. Soc. 1991, 113, 2771. (2) The nickel-catalyzed reaction cited above is conducted at 0 °C and is applicable to unactivated alkynes. There is an earlier report of a thermal reaction that requires elevated temperatures (80−150 °C) and heteroatom substituted alkynes: Danheiser, R. L.; Gee, S. K. J. Org. Chem. 1984, 49, 1672. (3) (a) Jun, C.-H.; Lee, H. J. Am. Chem. Soc. 1999, 121, 880. (b) Jun, C.-H.; Lee, H.; Lim, S.-G. J. Am. Chem. Soc. 2001, 123, 751.

Figure 2. Stereoablative cycloreversion precedes oxidative addition and stereochemical model for ruthenaindanone formation. C

DOI: 10.1021/jacs.8b05724 J. Am. Chem. Soc. XXXX, XXX, XXX−XXX

Communication

Journal of the American Chemical Society (4) (a) Murakami, M.; Itahashi, T.; Ito, Y. J. Am. Chem. Soc. 2002, 124, 13976. (b) Matsuda, T.; Fujimoto, A.; Ishibashi, M.; Murakami, M. Chem. Lett. 2004, 33, 876. (5) For selected reviews on metal-catalyzed C−C bond activation, see (a) Bishop, K. C., III Chem. Rev. 1976, 76, 461. (b) Mitsudo, T.a.; Kondo, T. Synlett 2001, 2001, 0309. (c) Kondo, T.; Mitsudo, T.-a. Chem. Lett. 2005, 34, 1462. (d) Murakami, M.; Matsuda, T. Chem. Commun. 2011, 47, 1100. (e) Kondo, T. Bull. Chem. Soc. Jpn. 2011, 84, 441. (f) Nakao, Y. Top. Curr. Chem. 2014, 346, 33. (g) Dreis, A. M.; Douglas, C. J. Top. Curr. Chem. 2014, 346, 85. (h) Souillart, L.; Cramer, N. Chem. Rev. 2015, 115, 9410. (i) Shaw, M. H.; Bower, J. F. Chem. Commun. 2016, 52, 10817. (j) Kondo, T. Eur. J. Org. Chem. 2016, 2016, 1232. (k) Chen, P.-h.; Dong, G. Chem. - Eur. J. 2016, 22, 18290. (l) Murakami, M.; Ishida, N. J. Am. Chem. Soc. 2016, 138, 13759. (m) Chen, P.-h.; Billett, B. A.; Tsukamoto, T.; Dong, G. ACS Catal. 2017, 7, 1340. (n) Fumagalli, G.; Stanton, S.; Bower, J. F. Chem. Rev. 2017, 117, 9404. (6) For a recent review on donor−acceptor cyclopropanes, see Schneider, T. F.; Kaschel, J.; Werz, D. B. Angew. Chem., Int. Ed. 2014, 53, 5504. (7) For selected examples of donor−acceptor cyclopropanes in enantioselective intermolecular metal-catalyzed C−C bond activations, see (a) Parsons, A. T.; Johnson, J. S. J. Am. Chem. Soc. 2009, 131, 3122. (b) Moran, J.; Smith, A. G.; Carris, R. M.; Johnson, J. S.; Krische, M. J. J. Am. Chem. Soc. 2011, 133, 18618. (c) Trost, B. M.; Morris, P. J. Angew. Chem., Int. Ed. 2011, 50, 6167. (d) Trost, B. M.; Morris, P. J.; Sprague, S. J. J. Am. Chem. Soc. 2012, 134, 17823. (e) Liu, Q.-S.; Wang, D.-Y.; Yang, Z.-J.; Luan, Y.-X.; Yang, J.-F.; Li, J.F.; Pu, Y.-G.; Ye, M. J. Am. Chem. Soc. 2017, 139, 18150. (8) (a) Shibata, T.; Nishizawa, G.; Endo, K. Synlett 2008, 2008, 765. (b) Yada, A.; Fujita, S.; Murakami, M. J. Am. Chem. Soc. 2014, 136, 7217. (c) Guo, R.; Zheng, X.; Zhang, D.; Zhang, G. Chem. Sci. 2017, 8, 3002. (d) Zheng, X.; Guo, R.; Zhang, G.; Zhang, D. Chem. Sci. 2018, 9, 1873. (9) For recent reviews on transfer hydrogenative C−C bond formation, see (a) Ketcham, J. M.; Shin, I.; Montgomery, T. P.; Krische, M. J. Angew. Chem., Int. Ed. 2014, 53, 9142. (b) Nguyen, K. D.; Park, B. Y.; Luong, T.; Sato, H.; Garza, V. J.; Krische, M. J. Science 2016, 354, aah5133. (c) Kim, S. W.; Zhang, W.; Krische, M. J. Acc. Chem. Res. 2017, 50, 2371. (d) Sato, H.; Turnbull, B. W. H.; Fukaya, K.; Krische, M. J. Angew. Chem., Int. Ed. 2018, 57, 3012. (10) (a) Geary, L. M.; Glasspoole, B. W.; Kim, M. M.; Krische, M. J. J. Am. Chem. Soc. 2013, 135, 3796. (b) McInturff, E. L.; Mowat, J.; Waldeck, A. R.; Krische, M. J. J. Am. Chem. Soc. 2013, 135, 17230. (c) Kasun, Z. A.; Geary, L. M.; Krische, M. J. Chem. Commun. 2014, 50, 7545. (d) Geary, L. M.; Chen, T.-Y.; Montgomery, T. P.; Krische, M. J. J. Am. Chem. Soc. 2014, 136, 5920. (e) Saxena, A.; Perez, F.; Krische, M. J. J. Am. Chem. Soc. 2015, 137, 5883. (f) Saxena, A.; Perez, F.; Krische, M. J. Angew. Chem., Int. Ed. 2016, 55, 1493. (g) Sato, H.; Fukaya, K.; Poudel, B. S.; Krische, M. J. Angew. Chem., Int. Ed. 2017, 56, 14667. (h) Sato, H.; Bender, M.; Chen, W.; Krische, M. J. J. Am. Chem. Soc. 2016, 138, 16244. (i) Bender, M.; Turnbull, B. W. H.; Ambler, B. R.; Krische, M. J. Science 2017, 357, 779. (11) For intermolecular nickel-catalyzed cycloadditions of cyclobutenone derivatives with π-unsaturated partners, see ref 1 and the following reports: (a) Murakami, M.; Ashida, S.; Matsuda, T. J. Am. Chem. Soc. 2005, 127, 6932. (b) Auvinet, A.-L.; Harrity, J. P. A. Angew. Chem., Int. Ed. 2011, 50, 2769. (c) Ho, K. Y. T.; Aïssa, C. Chem. - Eur. J. 2012, 18, 3486. (d) Ishida, N.; Yuhki, T.; Murakami, M. Org. Lett. 2012, 14, 3898. (e) Kumar, P.; Louie, J. Org. Lett. 2012, 14, 2026. (f) Thakur, A.; Evangelista, J. L.; Kumar, P.; Louie, J. J. Org. Chem. 2015, 80, 9951. (12) For intermolecular rhodium-catalyzed cycloadditions of cyclobutenone derivatives with π-unsaturated partners, see (a) Kondo, T.; Taguchi, Y.; Kaneko, Y.; Niimi, M.; Mitsudo, T. A. Angew. Chem., Int. Ed. 2004, 43, 5369. (b) Kondo, T.; Niimi, M.; Nomura, M.; Wada, K.; Mitsudo, T. Tetrahedron Lett. 2007, 48, 2837. (13) For intermolecular ruthenium-catalyzed cycloadditions of cyclobutenone derivatives with π-unsaturated partners, see ref 12a and the

following report: Kondo, T.; Nakamura, A.; Okada, T.; Suzuki, N.; Wada, K.; Mitsudo, T.-a. J. Am. Chem. Soc. 2000, 122, 6319. (14) For enantioselective organocatalyzed cycloadditions of nonbenzannulated cyclobutenones, see (a) Li, B.-S.; Wang, Y.; Jin, Z.; Zheng, P.; Ganguly, R.; Chi, Y. R. Nat. Commun. 2015, 6, 6207. (b) Li, Y.; Su, X.; Zhou, W.; Li, W.; Zhang, J. Chem. - Eur. J. 2015, 21, 4224. (15) The reaction of Ru3(CO)12 with dppe in benzene solvent provides Ru(CO)3(dppe): Sanchez-Delgado, R. A.; Bradley, J. S.; Wilkinson, G. J. Chem. Soc., Dalton Trans. 1976, 399. As shown in ref 10b, the mononuclear ruthenium(II) adamantanecarboxylate complex, Ru(CO)(dppp)(C10H15CO2)2, is obtained in a similar manner. (16) For reviews on angucycline natural products, see (a) Kharel, M. K.; Pahari, P.; Shepherd, M. D.; Tibrewal, N.; Nybo, S. E.; Shaaban, K. A.; Rohr, J. Nat. Prod. Rep. 2012, 29, 264. (b) Carreño, M. C.; Urbano, A. Synlett 2005, 2005, 1. (c) Krohn, K.; Rohr, J. Top. Curr. Chem. 1997, 188, 127. (17) For isolation and initial biological profiles of arenimycins A−D, see (a) Asolkar, R. N.; Kirkland, T. N.; Jensen, P. R.; Fenical, W. J. J. Antibiot. 2010, 63, 37. (b) Kersten, R. D.; Ziemert, N.; Gonzalez, D. J.; Duggan, B. M.; Nizet, V.; Dorrestein, P. C.; Moore, B. S. Proc. Natl. Acad. Sci. U. S. A. 2013, 110, E4407. (c) Kang, H.-S.; Brady, S. F. J. Am. Chem. Soc. 2014, 136, 18111. (18) For isolation and initial biological profiles of collinone, see Martin, R.; Sierner, O.; Alvarez, M. A.; De Clercq, E.; Bailey, J. E.; Minas, W. J. Antibiot. 2001, 54, 239. (19) For isolation and initial biological profiles of SF2446, see (a) Takeda, U.; Okada, T.; Takagi, M.; Gomi, S.; Itoh, J.; Sezaki, M.; Ito, M.; Miyadoh, S.; Shomura, T. J. Antibiot. 1988, 41, 417. (b) Gomi, S.; Sasaki, T.; Itoh, J.; Sezaki, M. J. Antibiot. 1988, 41, 425. (20) Richter, M. F.; Drown, B. S.; Riley, A. P.; Garcia, A.; Shirai, T.; Svec, R. L.; Hergenrother, P. J. Nature 2017, 545, 299. (21) Wurm, T.; Turnbull, B. W. H.; Ambler, B. R.; Krische, M. J. J. Org. Chem. 2017, 82, 13751. (22) Liebeskind, L. S.; Baysdon, S. L.; South, M. S.; Blount, J. F. J. Organomet. Chem. 1980, 202, C73. (23) For selected reviews on the Hauser−Kraus annulation, see (a) Mitchell, A. S.; Russell, R. A. Tetrahedron 1995, 51, 5207. (b) Rathwell, K.; Brimble, M. A. Synthesis 2007, 2007, 643. (c) Mal, D.; Pahari, P. Chem. Rev. 2007, 107, 1892. (24) For selected examples use of the Hauser−Kraus annulation in the synthesis of Type II polyketides, see (a) Hauser, F. M.; Rhee, R. P. J. Am. Chem. Soc. 1979, 101, 1628. (b) Hauser, F. M.; Mal, D. J. Am. Chem. Soc. 1983, 105, 5688. (c) Hauser, F. M.; Gauuan, P. J. F. Org. Lett. 1999, 1, 671. (d) Matsumoto, T.; Yamaguchi, H.; Tanabe, M.; Yasui, Y.; Suzuki, K. Tetrahedron Lett. 2000, 41, 8393. (e) Nicolaou, K. C.; Zhang, H.; Chen, J. S.; Crawford, J. J.; Pasunoori, L. Angew. Chem., Int. Ed. 2007, 46, 4704. (f) Gibson, J. S.; Andrey, O.; Brimble, M. A. Synthesis 2007, 2007, 2611. (g) Nicolaou, K. C.; Becker, J.; Lim, Y. H.; Lemire, A.; Neubauer, T.; Montero, A. J. Am. Chem. Soc. 2009, 131, 14812. (h) Mal, D.; De, S. R. Org. Lett. 2009, 11, 4398. (i) Yang, X.; Fu, B.; Yu, B. J. Am. Chem. Soc. 2011, 133, 12433. (j) Liau, B. B.; Milgram, B. C.; Shair, M. D. J. Am. Chem. Soc. 2012, 134, 16765. (k) Adachi, S.; Watanabe, K.; Iwata, Y.; Kameda, S.; Miyaoka, Y.; Onozuka, M.; Mitsui, R.; Saikawa, Y.; Nakata, M. Angew. Chem., Int. Ed. 2013, 52, 2087. (25) For selected examples of the use of aryne-mediated benzannulation in the synthesis of Type II polyketides, see (a) Hosoya, T.; Takashiro, E.; Matsumoto, T.; Suzuki, K. J. Am. Chem. Soc. 1994, 116, 1004. (b) Matsumoto, T.; Sohma, T.; Yamaguchi, H.; Kurata, S.; Suzuki, K. Synlett 1995, 1995, 263. (c) Chen, C.-L.; Sparks, S. M.; Martin, S. F. J. Am. Chem. Soc. 2006, 128, 13696. (d) O’Keefe, B. M.; Mans, D. M.; Kaelin, D. E., Jr.; Martin, S. F. J. Am. Chem. Soc. 2010, 132, 15528. (26) For selected reviews on tetracycline antibiotics, see (a) Nguyen, F.; Starosta, A. L.; Arenz, S.; Sohmen, D.; Doenhoefer, A.; Wilson, D. N. Biol. Chem. 2014, 395, 559. (b) Wright, P. M.; Seiple, I. B.; Myers, A. G. Angew. Chem., Int. Ed. 2014, 53, 8840. (c) Liu, F.; Myers, A. G. Curr. Opin. Chem. Biol. 2016, 32, 48. D

DOI: 10.1021/jacs.8b05724 J. Am. Chem. Soc. XXXX, XXX, XXX−XXX