Enantioselective Separation and Dissipation of Prothioconazole and

4 hours ago - In this study, a simple and effective chiral analytical method was developed to monitor prothioconazole and prothioconazole-desthio at t...
2 downloads 0 Views 868KB Size
Subscriber access provided by Gothenburg University Library

New Analytical Methods

Enantioselective Separation and Dissipation of Prothioconazole and Its Major Metabolite ProthioconazoleDesthio Enantiomers in Tomato, Cucumber, and Pepper Duoduo Jiang, Fengshou Dong, Jun Xu, Xingang Liu, Xiaohu Wu, Xinglu Pan, Yan Tao, Runan Li, and Yongquan Zheng J. Agric. Food Chem., Just Accepted Manuscript • DOI: 10.1021/acs.jafc.9b03607 • Publication Date (Web): 21 Aug 2019 Downloaded from pubs.acs.org on August 25, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 33

Journal of Agricultural and Food Chemistry

1

Enantioselective Separation and Dissipation of Prothioconazole and Its Major

2

Metabolite Prothioconazole-Desthio Enantiomers in Tomato, Cucumber, and

3

Pepper

4 5

Duoduo Jiang, Fengshou Dong*, Jun Xu, Xingang Liu, Xiaohu Wu, Xinglu Pan, Yan

6

Tao, Runan Li, Yongquan Zheng

7

State Key Laboratory for Biology of Plant Diseases and Insect Pests, Institute of Plant

8

Protection, Chinese Academy of Agricultural Sciences, Beijing, 100193, P. R. China

9 10



11

Diseases and Insect Pests, Institute of Plant Protection, Chinese Academy of

12

Agricultural Sciences, Beijing, 100193, P. R. China

13

Tel.: +86 10 62815938; fax: +86 10 62815938.

14

E-mail address: [email protected] (F. Dong).

Correspondence: Prof. Fengshou Dong, State Key Laboratory for Biology of Plant

15 16 17 18 19 20 21 22

1

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

23 24

ABSTRACT

25

In this study, a simple and effective chiral analytical method was developed to

26

monitor prothioconazole and prothioconazole-desthio at the enantiomeric level using

27

supercritical fluid chromatography-tandem triple quadrupole mass spectrometry. The

28

baseline enantioseparation for prothioconazole and prothioconazole-desthio was

29

achieved within 2 min on a Chiralcel OD-3 column with CO2/0.2% acetic acid-5

30

mmol/L ammonium acetate 2-propanol (85:15, v/v) as mobile phase at a flow rate of

31

1.5 mL/min and column temperature of 25 °C. The limit of quantitation (LOQ) for each

32

enantiomer was 5 μg/kg, with baseline resolution of >3.0. The results of

33

enantioselective dissipation showed R-(-)-prothioconazole was preferentially degraded

34

in tomato, cucumber, and pepper under greenhouse conditions. S-(-)-prothioconazole-

35

desthio was preferentially degraded in tomato and cucumber, however, R-(+)-

36

prothioconazole-desthio was preferentially degraded in pepper. Results of this study

37

may help to facilitate more accurate risk assessment of prothioconazole and its major

38

metabolite in agricultural products.

39

KEYWORDS: prothioconazole, prothioconazole-desthio, enantioselective separation,

40

enantioselective dissipation, SFC-MS/MS

41 42 43 44 2

ACS Paragon Plus Environment

Page 2 of 33

Page 3 of 33

Journal of Agricultural and Food Chemistry

45 46

INTRODUCTION

47

Prothioconazole

(R,

S)-(2-(1-chlorocyclopropyl)-3-(2-chlorophenyl)-2-

48

hydroxypropyl]-1,2-dihydro-3H-1,2,4-triazole-3-thione), belongs to triazole fungicides

49

with outstanding protective and curative properties (Figure 1). Owing to the ability of

50

inhibiting the C-14 α-demethylase enzyme involved in the biosynthesis of fungal sterols,

51

prothioconazole, as a racemic mixture, has been used to control powdery mildew,

52

Fusarium head blight, rusts, and leaf spot diseases on cereal, wheat, soybean, and other

53

economic crops1-2. Prothioconazole-desthio, (R, S)-(2-(1-chlorocyclopropyl)-1-(2-

54

chlorophenyl)-3(1,2,4-triazol-1-yl)-propan-2-ol),

55

prothioconazole in plant and environment, has one chiral carbon atom and consists of

56

a pair of enantiomers, similar to the case of prothioconazole (Figure 1). According to

57

the toxicity data, prothioconazole-desthio is more toxic than prothioconazole in rats3,

58

and has gradually received increasing attention. Nowadays, a few studies have been

59

conducted on the analysis methods and degradation behaviors of racemic

60

prothioconazole and its major metabolite in food and environment, including wheat3,

61

peanut4, animal origin food5, and soil6, for food and environment safety purpose.

62

However, there were limited research on the enantiomeric analysis methods of

63

prothioconazole and prothioconazole-desthio, and no studies have reported the

64

degradation of prothioconazole and prothioconazole-desthio in agricultural products at

65

the enantiomeric level. Consequently, their actual effects are always underestimated or

66

overestimated because enantiomers of many chiral pesticides differ in bioactivity,

the

3

ACS Paragon Plus Environment

major

metabolite

of

Journal of Agricultural and Food Chemistry

67

metabolism, and environmental behaviors during the course of degradation, absorption

68

and accumulation7-14. Therefore, the study of the enantioselective degradation of

69

prothioconazole and prothioconazole-desthio in agricultural products is crucial for the

70

further accurate risk assessment.

71

To date, few enantiomeric analysis methods of prothioconazole and its metabolites

72

in agricultural food and environmental samples have been reported. Zhang et al.15

73

presented a method for the simultaneous enantioselective determination of

74

prothioconazole and prothioconazole-desthio in cucumber, pear, soil, and water by

75

ultra-performance liquid chromatography−tandem mass spectrometry (UPLC-MS/MS),

76

with a long retention time of 11.83-19.30 min, and the pretreatment was time-

77

consuming. Jiang et al.16 developed a supercritical fluid chromatography (SFC) and

78

vibrational circular dichroism spectroscopic method for the enantioselective

79

determination of prothioconazole in soil and tomato. However, the limits of

80

quantitation (LOQs) of prothioconazole enantiomers were in the range of 4.99-5.52

81

mg/kg, which was lack of sensitivity. Hence, the development of a rapid and sensitive

82

method is significant for the enantioselective determination of prothioconazole and

83

prothioconazole-desthio in agricultural products.

84

In China, tomato, cucumber, and pepper are widely cultivated, and powdery mildew,

85

Fusarium head blight, and rusts happen frequently during the growth of these three

86

vegetables. To date, few prothioconazole formulations were only registered on wheat

87

in China. However, several studies have payed attention with foresight on the analysis

88

methods of prothioconazole and its major metabolite in tomato and cucumber15-16, and 4

ACS Paragon Plus Environment

Page 4 of 33

Page 5 of 33

Journal of Agricultural and Food Chemistry

89

it has possibility that prothioconazole would be registered on solanaceous and

90

cucurbitaceous vegetables in the future. So, the establishment of analysis methods and

91

study of dissipation of prothioconazole and prothioconazole-desthio enantiomers in

92

solanaceous and cucurbitaceous vegetables are meaningful and important. In this study,

93

a sensitive, effective, and rapid chiral analytical method was established to

94

simultaneously determine prothioconazole and prothioconazole-desthio enantiomers in

95

tomato, cucumber, and pepper by supercritical fluid chromatography-tandem triple

96

quadrupole mass spectrometry (SFC-MS/MS). The pretreatment procedure for the

97

target analytes were based on the QuEChERS (quick, easy, cheap, effective, rugged,

98

and safe) method, which were simple and time-saving through the usage of butylated

99

hydroxytoluene (BHT). Additionally, the proposed method was used to investigate the

100

enantioselective degradation of prothioconazole and prothioconazole-desthio in tomato,

101

cucumber, and pepper under greenhouse conditions. This study will provide significant

102

information for the accurate risk assessment of the chiral fungicide, prothioconazole.

103

MATERIALS AND METHODS

104

Chemicals and Reagents. Racemic prothioconazole and prothioconazole-desthio

105

standards (stereoisomer ratio=1:1, 99.0% purity) were obtained from the China

106

Standard Material Center (Beijing, China). HPLC-grade acetonitrile (ACN), methanol

107

(MeOH), ethanol (EtOH) and 2-propanol (IPA) were purchased from Sigma-Aldrich

108

(Steinheim, Germany). Chromatographic grade formic acid and acetic acid (HAc) were

109

obtained from Thermo Fisher Scientific (Waltham, MA, USA). Analytical grade

110

sodium chloride (NaCl), butylated hydroxytoluene (BHT), anhydrous sodium sulfate 5

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 6 of 33

111

(Na2SO4), ammonium acetate (NH4OAc) and acetonitrile were purchased from Beihua

112

Fine-Chemicals Co. (Beijing, China). Ultrapure water was obtained from a Milli-Q

113

reagent water system (Millipore, Bedford, MA, USA). The sorbents including

114

primary/secondary amines (PSA, 40 μm), octadecylsilane (C18, 50 μm), and

115

graphitized carbon black (GCB, 120-400 mesh) were purchased from Bonna-Agela

116

Technologies (Tianjin, PRC).

117

The standard stock solutions (100 mg/L) of rac-prothioconazole and rac-

118

prothioconazole-desthio were prepared in LC-grade ACN. The standard working

119

solutions

120

prothioconazole-desthio at 10, 50, 100, 500, 1000, and 2000 μg/L (5, 25, 50, 250, 500,

121

and 1000 μg/L of each enantiomer) were prepared in pure ACN from the stock solution

122

by serial dilution. All the solutions were wrapped with aluminum foil and stored in a

123

refrigerator at -20 ℃ prior to analysis.

124

Field Trial and Sample Collection. The field trials were conducted according to the

125

guidelines for pesticides residue trials (NY/T 788-2004)17. The greenhouse were

126

located at the experimental base of the Institute of Plant Protection, Chinese Academy

127

of Agricultural Sciences (Langfang, China, 116.4 °E, 39.3 °N). Each plot had an area

128

of 50 m2 with a buffer area of one-meter. A 40% suspension concentrate (SC) of

129

prothioconazole was sprayed on three plots. Because prothioconazole has not been

130

registered on tomato, cucumber, or pepper in China, we referred to the dosage of 337.5

131

g a.i/ha of 25% suspension concentrate (SC) of prothioconazole on wheat (1.5 times of

132

the recommended high dosage)3. In addition, one plot was used as the control. Samples

and

matrix-matched

standard

solutions

6

ACS Paragon Plus Environment

of

prothioconazole

and

Page 7 of 33

Journal of Agricultural and Food Chemistry

133

(tomato, cucumber, and pepper) were collected from each treatment at 2 h, 1, 2, 3, 5, 7,

134

and 14 days after spraying. All samples were mixed and stored at -20 ℃ until analysis.

135

Sample Preparation. The extraction and purification procedures were based on

136

QuEChERS method due to its simplicity and effectiveness18-19. 10 g of homogenized

137

samples were weighed into a 50 mL plastic centrifuge tube. Then, 10 mL ACN and 1 g

138

BHT were added before vortexing for 5 min. Next, 1 g of NaCl and 4 g of anhydrous

139

Na2SO4 were added, and the tube was vortexed for another 3 min. Thereafter, the

140

mixture was centrifuged for 5 min at 2588 g, and 1.5 mL of the upper layer was

141

transferred into a single-use centrifuge tube containing 50 mg of C18. The tube was

142

vortexed for 1 min and centrifuged at 2588 g for 5 min. Finally, the supernatant was

143

filtered into an autosampler vial through a 0.22 μm nylon syringe filter for SFC-MS/MS

144

analysis.

145

Apparatus and Chromatographic Conditions. An ACQUITY UPC2 system (Waters,

146

Milford, MA, USA), equipped with an Acquity UPCC binary solvent manager, an

147

Acquity UPCC convergence manager, an Acquity UPCC sample manager, a Waters

148

compensation pump and an Acquity UPCC column manager was used for the

149

chromatographic separation of the target analytes. Chiralcel OD-3 column (150 mm ×

150

3 mm, 3 μm particle size, Daicel, Japan), which was employed to separate the

151

stereoisomers of prothioconazole and prothioconazole-desthio, was coated with

152

cellulose tris (3,5-dimethylphenylcarbamate, 3 μm). Three additional chiral columns

153

including a Chiralpak IA-3 [amylose tris (3,5-dimethylphenylcarbamate), 5 μm], Lux

154

Cellulose-1 [cellulose tris (3,5-dimethylphenylcarbamate), 3 μm] and Lux Cellulose-2 7

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

155

[cellulose tris (3-chloro-4-methylphenylcarbamate), 3 μm] were evaluated. The

156

separation was conducted with the mobile phase (solvent A (CO2)/solvent B (0.2%

157

HAc-5 mmol/L NH4OAc IPA ) = 85:15 (v/v), at a constant flow rate of 1.5 mL/min for

158

5 min and an injection volume of 10 μL. The temperatures of chiral column and sample

159

manager were maintained at 25 ℃, 20 ℃, respectively. ABPR pressure and rate of the

160

compensation solvent (0.1% formic acid/MeOH) were 2000 psi, 0.2 mL/min,

161

respectively. The detection of the target compounds was quantified using a Xevo triple-

162

quadrupole (Xevo-TQD) mass spectrometer (Waters Corp., Milford, MA, USA),

163

equipped with an electrospray ionization (ESI) source, operating in the positive mode

164

for prothioconazole-desthio and negative mode for prothioconazole. The source

165

parameters were set as follows: capillary voltage, 3.0 kV; source temperature, 150 ℃;

166

and desolvation temperature, 500 °C. A 50 L/h cone gas flow and a 1000 L/h

167

desolvation gas flow were employed. The nebulizer gas consisted of 99.95% nitrogen,

168

and the collision gas, 99.99% argon at a pressure of 2 × 10-3 mbar in the T-Wave cell.

169

Multiple reaction monitoring (MRM) was applied to the MS analysis of

170

prothioconazole and prothioconazole-desthio with a dwell time of 163 ms per ion pair.

171

The specific MS/MS parameters were optimized as follows: m/z 342.0 was selected as

172

the precursor ion for prothioconazole with a cone voltage of 42 V; m/z 125.0 and 100.0

173

were chosen as the quantitative and qualitative ion, respectively, when their collision

174

energies were both set to 37 V. The cone voltage of prothioconazole-desthio was set to

175

36 V, and m/z 312.1 was selected as the precursor ion. The m/z values of 70.0 and 125.0

176

were selected as the quantitative ion and qualitative ion, respectively, and the 8

ACS Paragon Plus Environment

Page 8 of 33

Page 9 of 33

Journal of Agricultural and Food Chemistry

177

corresponding collision energies were set to 34 and 48 V, respectively. Masslynx NT

178

v.4.1 (Waters Corp.) software was used to collect and analyze the obtained data.

179

Data Analysis. The separation parameters of prothioconazole and prothioconazole-

180

desthio enantiomers, including the retention factor (k′), the selectivity factor (α) and the

181

resolution (Rs), were calculated as follows20:

182

k' = (t - t0)/t0

183

α = k2/k1

184

Rs = 1.177 × w1 + w2

(1) (2) t2 - t1

(3)

185

where t0 is the void time at the conditions mentioned above (t0=0.73 min, determined

186

using 1,3,5-tert-butylbenzene); t is the retention time; k is the retention factor; and w is

187

the peak width at half height.

188

The half-life (T1/2) of each enantiomer was calculated using the following equations:

189

C = C0e -kt

(4)

190

T1/2 = ln2/k

(5)

191

Where C0 and C indicate the concentrations of the enantiomer at time 0 and time t,

192

respectively. k is the degradation rate constant and ln2=0.693.

193

The enantiomeric fraction (EF), describing the enantioselectivity of prothioconazole

194

and prothioconazole-desthio degradation in three vegetable samples, was described

195

using the following equation:

196

EF =

197 198

A+ A

+

(6)

+ A-

Where A+ and A- represent the concentrations of the (+) and (-) enantiomers. RESULTS AND DISCUSSION 9

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

199

Optimization of the Enantiomeric Separation. Selection of the Chiral Column. The

200

interaction between chiral stationary phase (CSP) and mobile phase was regarded as

201

the most important factor in the enantioseparation20. Given the wide use of cellulose-

202

and amylose- based polysaccharide CSP in chiral separation, four chiral columns

203

(Chiralcel OD-3, Chiralpak IA-3, Lux Cellulose-1, and Lux Cellulose-2) were selected

204

to separate the target analyte under the same chromatographic condition: mobile phase

205

of CO2/ 0.2% HAc-5 mmol/L NH4OAc IPA (85/15 v/v), the mobile phase flow rate of

206

1.5 mL/min, and column temperature of 25 ℃. As Supplementary Figure S1 shows, the

207

two pairs of enantiomers could not be completely separated when Chiralpak IA-3, Lux

208

Cellulose-1, and Lux Cellulose-2 were employed. Despite the fact that both Chiralcel

209

OD-3 and Lux Cellulose-1 columns contained the same chiral selector, a perfect

210

baseline separation of enantiomers was only achieved on Chiralcel OD-3. This could

211

be due to the different silica forms employed in the manufacturing process, chain length,

212

branching of the derivatized cellulose or the degree of substitution, carbon load, and

213

coating solvent employed in the production process.

214

Composition of the Mobile Phase. Considering that the composition of the mobile phase

215

is crucial for the enantioseparation, different mobile phases (methanol, ethanol, IPA,

216

0.2% HAc-IPA, and 0.2% HAc-5 mmol/L NH4OAc IPA) were investigated to achieve

217

excellent chiral separation of the enantiomers on the Chiralcel OD-3 column. The

218

results indicated that prothioconazole and prothioconazole-desthio enantiomers were

219

both well separated only when 0.2% HAc-5 mmol/L NH4OAc IPA was employed as

220

the modifier (Supplementary Figure S1). Moreover, high peak areas were obtained 10

ACS Paragon Plus Environment

Page 10 of 33

Page 11 of 33

Journal of Agricultural and Food Chemistry

221

attributed to the ability of HAc to provide protons for the formation of cations and

222

improve the ionization efficiency of the target analyte. In addition, the application of

223

HAc and NH4OAc was beneficial to obtain symmetrical peak shapes.

224

Another factor to consider was the different ratios of the modifier. As the proportion

225

of the modifier increased, the retention time (RT) of the enantiomers decreased (Table

226

1). However, when the proportion of the organic phase increased from 15% to 30%, the

227

Rs decreased significantly from 3.12 to 1.51 for prothioconazole, and 3.73 to 2.21 for

228

prothioconazole-desthio (Table 1). Although the Rs values were all acceptable (Rs >

229

1.5), a high system pressure was noted. The instrument system pressure would be

230

beyond its range when the modifier content was over 20%, which was owing to the

231

high viscosity of IPA. This high pressure was not beneficial to the efficiency or the

232

lifetime of the column either. Therefore, by comprehensively considering the analysis

233

efficiency, resolution, and system pressure, 15% 0.2% HAc-5 mmol/L NH4OAc IPA

234

was selected as the modifier for further study.

235

Flow Rate and Column Temperature. Given the low viscosity and high diffusivity

236

of the supercritical fluids, a high flow rate could be used to decrease the analysis time

237

and increase the throughput capacity under the condition of good separation efficiency.

238

Different flow rates (1.0, 1.5, and 2.0 mL/min) were evaluated with a mobile phase of

239

0.2% HAc-5 mmol/L NH4OAc IPA (85:15, v/v). As shown in Table 1, the Rs values

240

and the RTs increased when the flow rate decreased in the selected range. All Rs values

241

obtained from 1.0 to 2.0 mL/min were satisfactory. In addition, no noticeable

242

differences in the Rs and RT values were found between the flow rate of 1.5 and 2.0 11

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

243

mL/min. Considering the system pressure, the flow rate of 1.5 mL/min was selected for

244

further study.

245

Noticeably, the column temperature could affect the adsorption-desorption

246

equilibrium between CSPs and the analyte molecules via two pathways: enthalpy

247

driven separation and entropy driven separation21-22. In this study, the column

248

temperature was evaluated from 25 ℃ to 40 ℃. From Table 1, the Rs values of the

249

prothioconazole and prothioconazole-desthio enantiomers were decreased when the

250

temperature increased, which implied that the separation of the target enantiomers

251

could be contributed to an enthalpically driven process and that a relatively low

252

temperature was beneficial for obtaining better Rs values.

253

Comprehensive consideration of RT, separation effect, and the system pressure,

254

chiral separation of prothioconazole and prothioconazole-desthio was performed on

255

Chiralcel OD-3 column using CO2/0.2% HAc-5 mmol/L NH4OAc IPA (85:15, v/v) as

256

the mobile phase of 1.5 mL/min and a column temperature of 25 °C. Comparing with

257

the previous research, a noticeable improvement was achieved in the analysis time (