Enhancement of Morphological and Optoelectronic ... - ACS Publications

Feb 6, 2018 - Glass-ITO was used as substrate, nickel oxide (NiOx) as hole transporting layer (HTL), PCBM as electron transport layer (ETL), and silve...
0 downloads 10 Views 2MB Size
Subscriber access provided by Rasmuson/BioSciences Library | University of Alaska Fairbanks

Article

Enhancement of morphological and optoelectronic properties of perovskite films by CH3NH3Cl treatment for efficient solar mini-modules Jose Ignacio Uribe, John Ciro, Juan Felipe Montoya, Jaime Osorio, and Franklin Jaramillo ACS Appl. Energy Mater., Just Accepted Manuscript • DOI: 10.1021/acsaem.7b00194 • Publication Date (Web): 06 Feb 2018 Downloaded from http://pubs.acs.org on February 6, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Energy Materials is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Energy Materials

Enhancement of Morphological and Optoelectronic Properties of Perovskite Films by CH3NH3Cl Treatment for Efficient Solar Mini-Modules

Jose I. Uribe1,2,*, John Ciro1, Juan Felipe Montoya1, Jaime Osorio2, Franklin Jaramillo1* 1. Centro de Investigación, Innovación y Desarrollo de Materiales – CIDEMAT, Facultad de Ingeniería, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín, Colombia. 2. Grupo de Estado Sólido, Instituto de Física, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín, Colombia. * Corresponding authors: [email protected]; [email protected]

Abstract In order to get homogeneous and high-quality perovskite CH3NH3PbI3 films, different growing methods have been developed, but most of them are unsuitable to scaling up. In this work, we studied in a systematic approach the influence of CH3NH3Cl (MACl) surface treatment in the acetonitrile (ACN) deposition route. This method does not require vacuum neither solvents quenching steps, which make it probable one of the easiest for transference from lab scale to large area deposition techniques such as roll-to-roll printing. The properties of perovskite films grown by ACN method and the influence of the MACl on the performance of the perovskite solar cells (PSCs) are characterized in detail by different 1 ACS Paragon Plus Environment

ACS Applied Energy Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 23

techniques. By Atomic Force Microscopy (AFM) and Kelvin Probe Force Microscopy (KPFM) we found significant differences in the morphology and the work function of the perovskite with and without MACl treatment. Moreover, the microstructure presents very different behavior: after being exposed to radiation the MACl treated sample presented passivated grain boundaries and higher intensity in the photoluminescence (PL) emission. The higher PL for perovskites films with MACl treatment correlates with superior photovoltaic parameters of PSCs. All these features lead to highly homogeneous perovskite layers on large areas enabling the fabrication of 10 x 10 cm solar mini-modules processed in air at low temperature (