Enhancement of the Superoleophobic Properties of Fluorinated

Oct 29, 2014 - Outmatching superhydrophobicity: bio-inspired re-entrant curvature for mighty superamphiphobicity in air. Liwei Chen , Zhiguang Guo , W...
0 downloads 0 Views 2MB Size
Article pubs.acs.org/JPCC

Enhancement of the Superoleophobic Properties of Fluorinated PEDOP Using Polar Glycol Spacers Thierry Darmanin and Frédéric Guittard* CNRS, LPMC, UMR 7336, Université de Nice Sophia Antipolis, 06100 Nice, France S Supporting Information *

ABSTRACT: The formation of superoleophobic materials is extremely important for various potential applications, but these materials are extremely difficult to obtain due to the low surface tension of oils. Here, we synthesized original fluorinated (C4F9, C6F13, and C8F17) 3,4-ethylenedioxypyrrole (EDOP) derivatives with polar glycol spacers (diethylene glycol or triethylene glycol) to enhance the superoleophobic properties by electropolymerization. The mobility of the glycol spacers induces steric hindrance during electropolymerization and affects the presence of surface nanoporosity. However, the superoleophobic properties of fluorinated PEDOP can be improved, even if the presence of nanoporosity decreases, on condition that a high degree of nanostructures is preserved around the surface microstructures. This is possible by controlling the length of the fluorinated chain and the length of the glycol spacer. Using a diethylene glycol spacer and a C8F17 chain it is possible to obtain superoleophobic properties with θdiiodomethane = 153.0°, θsunflower oil = 148.3°, and θhexadecane = 148.0°, and with also low oil adhesion. The micro and nanostructures present on the surface and the high intrinsic oleophobic properties of the polymer allow the stabilization of the Cassie−Baxter state.



state even with low surface tension liquids.24−26 Indeed, an important negative Laplace pressure difference can occur changing the liquid−vapor interface27 from concave to convex, for example, which can increase the energy barrier between the Wenzel and the Cassie−Baxter state.28 Very recently, the importance of re-entrant curvatures for superoleophobic properties was also found in Nature.29−32 For example, the group of Werner reported the superoleophobic properties of collembola, also called springtails, which are skin-breathing arthropods and live in soil environment.30−32 The authors showed that to survive in their environment they have developed on their cuticles robust superoleophobic properties due to hexagonal or rhombic comblike patterns with negative overhangs. Different processes can be employed to reach superoleophobic properties.1,33−35 Among them, the electrodeposition of conducting polymers is a special process with many advantages such as the reproducibility and the ease of implementation.36−39 Because the conducting polymers exist in different doping states, doping agents can be introduced to change the surface wettability.40 The surface wettability can also be modified by grafting substituents in the monomer structure before polymerization.41 One of the best ways to reach superoleophobic properties with conducting polymers is the use of fluorinated 3,4ethylenedioxypyrrole (EDOP) derivatives.42−48 These properties were due to the formation of microstructures with

INTRODUCTION The creation of super oil-repellent materials, also called superoleophobic, is a hot field of research from a theoretical point of view and for various potential applications1 such as for oil/water separation,2−4 in microfluidics devices,5,6 antisoil clothes,7−11 antifingerprint/antireflective touchscreen and glasses,12,13 anticorrosion coatings,14 or printing technologies.15 In the literature, two different superoleophobic properties have been studied: superoleophobicity in air (solid−liquid−vapor interface)1 and underwater superoleophobicity (solid−liquid− liquid interface).16,17 In this manuscript only materials with superoleophobic properties in air are concerned. Because of their extremely low surface tension ( 90°), intrinsically oleophobic with diiodomethane and sunflower oil (θYdiiodomethane and θYsunflower oil > 90°), but intrinsically oleophilic with hexadecane (θYhexadecane < 90°). To our knowledge, these intrinsic oleophobic properties are the highest in comparison to the literature for a fluorinated polymer. Now, the results can be explained using the Wenzel and Cassie−Baxter equations.56,57 In the Wenzel state, the interface between the droplet and the surface is only composed of solid− liquid interface, and a roughness parameter (r) increases this interface.56 The equation is cos θ = r cos θY. If θY > 90°, r increases the apparent contact angle and reversely if θY < 90°, r decreases the apparent contact angle. In this work, the increase in θhexadecane from 77.8° to 148.0° in the case of PEDOP-EG2-F8 cannot be explained with this equation. Only the Cassie−Baxter equation can explain these values.57 In the Cassie−Baxter state, the droplet is suspended on top of asperities but also on air trapped inside the surface roughness. The equation is cos θ = rf f cos θY+ f − 1 where rf is roughness ratio of the wet surface, f is the solid fraction, and (1 − f) is the air fraction, as described by Marmur.58−60 The Cassie−Baxter equation can induce an increase in the contact angle whatever θY. The presence of both micro- and nanostructures on PEDOP-EG2-F8 films led to a high pinning of the three-phase contact line23 and as a consequence a high increase in θoils and also in θhexadecane even if θYhexadecane < 90°. Moreover, the high θYhexadecane is also important for the stabilization of the Cassie−Baxter state.27,28



ASSOCIATED CONTENT

S Supporting Information *

Table 1. Apparent Contact Angles of the Smooth Surfaces (Young Angles θY) polymer

Article

Notes

The authors declare no competing financial interest.



ACKNOWLEDGMENTS We thank J.-P. Laugier of the Centre Commun de Microscopie Appliquée (CCMA, Univ. Nice Sophia Antipolis) for the realization of the SEM images.



REFERENCES

(1) Bellanger, H.; Darmanin, T.; Taffin de Givenchy, E.; Guittard, F. Chemical and Physical Pathways for the Preparation of Superoleophobic Surfaces and Related Wetting Theories. Chem. Rev. 2014, 114, 2694− 2716. (2) Kota, A. K.; Kwon, G.; Choi, W.; Mabry, J. M.; Tuteja, A. HygroResponsive Membranes for Effective Oil−Water Separation. Nat. Commun. 2012, 3, 2027/1−2027/8. (3) Zhang, F.; Zhang, W. B.; Shi, Z.; Wang, D.; Jin, J.; Jiang, L. Nanowire-Haired Inorganic Membranes with Superhydrophilicity and Underwater Ultralow Adhesive Superoleophobicity for High-Efficiency Oil/Water Separation. Adv. Mater. 2013, 25, 4192−4198. (4) Yang, J.; Zhang, Z.; Xu, X.; Zhu, X.; Men, X.; Zhou, X. Superhydrophilic−Superoleophobic Coatings. J. Mater. Chem. 2012, 22, 2834−2837. (5) Freire, S. L. S.; Tanner, B. Additive-Free Digital Microfluidics. Langmuir 2013, 29, 9024−9030. (6) Wu, D.; Wu, S.-z.; Chen, Q.-D.; Zhao, S.; Zhang, H.; Jiao, J.; Piersol, J. A.; Wang, J.-N.; Sun, H.-B.; Jiang, L. Facile Creation of Hierarchical PDMS Microstructures with Extreme Underwater Superoleophobicity for Anti-Oil Application in Microfluidic Channels. Lab Chip 2011, 11, 3873−3879. (7) Nishizawa, S.; Shiratori, S. Fabrication of Semi-Transparent Superoleophobic Thin Film by Nanoparticle-Based Nano−Microstructures on See-Through Fabrics. J. Mater. Sci. 2013, 48, 6613−6618. (8) Pan, S.; Kota, A. K.; Mabry, J. M.; Tuteja, A. Superomniphobic Surfaces for Effective Chemical Shielding. J. Am. Chem. Soc. 2013, 135, 578−581. (9) Darmanin, T.; Tarrade, J.; Celia, E.; Guittard, F. Superoleophobic Meshes with High Adhesion by Electrodeposition of Conducting Polymer Containing Short Perfluorobutyl Chains. J. Phys. Chem. C 2014, 118, 2052−2057. (10) Darmanin, T.; Tarrade, J.; Celia, E.; Bellanger, H.; Guittard, F. Superoleophobic Meshes with Relatively Low Hysteresis and Sliding Angles by Electropolymerization: Importance of the Polymer-Growth Control. ChemPlusChem 2014, 79, 382−386. (11) Muthiah, P.; Bhushan, B.; Yun, K.; Kondo, H. Dual-LayeredCoated Mechanically-Durable Superomniphobic Surfaces with AntiSmudge Properties. J. Colloid Interface Sci. 2013, 409, 227−236. (12) Huang, C.-D.; Weng, W.-H.; Hwang, W.-J.; Anti-Fingerprint Coating Construction Containing Hydrophobic Nanocomposite, Oleophobic Nanocomposite or Superamphiphobic Nanocomposite. U.S. Patent, US 20060110537 A1 20060525, 2006. (13) Mazumder, P.; Jiang, Y.; Baker, D.; Carrilero, A.; Tulli, D.; Infante, D.; Hunt, A. T.; Pruneri, V. Superomniphobic, Transparent, and

CONCLUSIONS

We have shown the possibility of enhancing the superoleophobic properties of electrodeposited fluorinated PEDOP using polar glycol spacers (diethylene glycol or triethylene glycol). Even if the mobility of the glycol spacers induces steric hindrance during electropolymerization and affected the presence of surface nanoporosity, the superoleophobic properties could be improved on condition that a high degree of nanostructures is preserved around the surface microstructures. Hence, it was necessary to control the length of the fluorinated chain and the length of the glycol spacer. Superoleophobic properties with θdiiodomethane = 153.0°, θsunflower oil = 148.3°, and θhexadecane = 148.0° and with also low oil adhesion were obtained using a diethylene glycol spacer and a C8F17 chain. The stabilization of the Cassie−Baxter state was possible thanks to micro and nanostructures on the surface and the high intrinsic oleophobic properties of the polymer. 26918

dx.doi.org/10.1021/jp509509p | J. Phys. Chem. C 2014, 118, 26912−26920

The Journal of Physical Chemistry C

Article

Antireflection Surfaces Based on Hierarchical Nanostructures. Nano Lett. 2014, 14, 4677−4681. (14) Ge, B.; Zhang, Z.; Men, X.; Zhu, X.; Zhou, X. Sprayed Superamphiphobic Coatings on Copper Substrate with Enhanced Corrosive Resistance. Appl. Surf. Sci. 2014, 293, 271−274. (15) Zhao, H.; Law, K.-Y. Super Toner and Ink Repellent Superoleophobic Surface. ACS Appl. Mater. Interfaces 2012, 4, 4288− 4295. (16) Liu, K.; Tian, Y.; Jiang, L. Bio-Inspired Superoleophobic and Smart Materials: Design, Fabrication, and Application. Prog. Mater. Sci. 2013, 58, 503−564. (17) Liu, M.; Zheng, Y.; Zhai, J.; Jiang, L. Bioinspired Superantiwetting Interfaces with Special Liquid−Solid Adhesion. Acc. Chem. Res. 2010, 43, 368−377. (18) Tsujii, K.; Yamamoto, T.; Onda, T.; Shibuichi, S. Super OilRepellent Surfaces. Angew. Chem., Int. Ed. 1997, 36, 1011−1012. (19) Marmur, A. From Hygrophilic to Superhygrophobic: Theoretical Conditions for Making High-Contact-Angle Surfaces from LowContact-Angle Materials. Langmuir 2008, 24, 7573−7579. (20) Tuteja, A.; Choi, W.; Ma, M.; Mabry, J. M.; Mazzella, S. A.; Rutledge, G. C.; McKinley, G. H.; Cohen, R. E. Designing Superoleophobic Surfaces. Science 2007, 7, 1618−1622. (21) Im, M.; Im, H.; Lee, J.-H.; Yoon, J.-B.; Choi, Y.-K. A Robust Superhydrophobic and Superoleophobic Surface with Inverse-Trapezoidal Microstructures on a Large Transparent Flexible Substrate. Soft Matter 2010, 6, 1401−1404. (22) Joly, L.; Biben, T. Wetting and Friction on Superoleophobic Surfaces. Soft Matter 2009, 5, 2549−2557. (23) Bico, J.; Thiele, U.; Quéré, D. Wetting of Textured Surfaces. Colloids Surf., A 2002, 206, 41−46. (24) Whyman, G.; Bormashenko, E. How to Make the Cassie Wetting State Stable? Langmuir 2011, 27, 8171−8176. (25) Bormashenko, E. Why Does the Cassie−Baxter Equation Apply? Colloids Surf., A 2008, 324, 47−50. (26) Nosonovsky, M. Multiscale Roughness and Stability of Superhydrophobic Biomimetic Interfaces. Langmuir 2007, 23, 3157−3161. (27) Liu, J.-L.; Feng, X.-Q.; Wang, G.; Yu, S.-W. Mechanisms of Superhydrophobicity on Hydrophilic Substrates. J. Phys.: Condens. Matter 2007, 19, 356002/1−356002/12. (28) Cao, L.; Hu, H.-H.; Gao, D. Design and Fabrication of Microtextures for Inducing a Superhydrophobic Behavior on Hydrophilic Materials. Langmuir 2007, 23, 4310−4314. (29) Rakitov, R.; Gorb, S. N. Brochosomal Coats Turn Leafhopper (Insecta, Hemiptera, Cicadellidae) Integument to Superhydrophobic State. Proc. R. Soc., B 2013, 280, 20122391. (30) Helbig, R.; Nicker, J.; Neinhuis, C.; Werner, C. Smart Skin Patterns Protect Springtails. PLoS One 2011, 6, e25105. (31) Nicker, J.; Helbig, R.; Schulz, H.-J.; Werner, C.; Neinhuis, C. Diversity and Potential Correlations to the Function of Collembola Cuticle Structures. Zoomorphology 2013, 132, 183−195. (32) Hensel, R.; Helbig, R.; Aland, S.; Braun, H.-G.; Voigt, A.; Neinhuis, C.; Werner, C. Wetting Resistance at Its Topographical Limit: The Benefit of Mushroom and Serif T Structures. Langmuir 2013, 29, 1100−1112. (33) Starostin, A.; Valtsifer, V.; Strelnikov, V.; Bormashenko, E.; Grynyov, R.; Y. Bormashenko, Y.; Gladkikh, A. Robust Technique Allowing the Manufacture of Superoleophobic (Omniphobic) Metallic Surfaces. Adv. Eng. Mater. 2014, 16, 1127−1132. (34) Ge, D.; Yang, L.; Zhang, Y.; Rahmawan, Y.; Yang, S. Transparent and Superamphiphobic Surfaces from One-Step Spray Coating of Stringed Silica Nanoparticle/Sol Solutions. Part. Part. Syst. Charact. 2013, 31, 763−770. (35) Lee, S. E.; Kim, H.-J.; Lee, S.-H.; Choi, D.-G. Superamphiphobic Surface by Nanotransfer Molding and Isotropic Etching. Langmuir 2013, 29, 8070−8075. (36) Darmanin, T.; Guittard, F. Wettability of Conducting Polymers: From Superhydrophilicity to Superoleophobicity. Prog. Polym. Sci. 2014, 39, 656−682.

(37) Long, Y.-Z.; Li, M.-M.; Gu, C.; Wan, M.; Duvail, J.-L.; Liu, Z.; Fan, Z. Recent Advances in Synthesis, Physical Properties and Applications of Conducting Polymer Nanotubes and Nanofibers. Prog. Polym. Sci. 2011, 36, 1415−1442. (38) Li, C.; Bai, H.; Shi, G. Conducting Polymer Nanomaterials: Electrosynthesis and Applications. Chem. Soc. Rev. 2009, 38, 2397− 2409. (39) Beaujuge, P. M.; Reynolds, J. R. Color Control in π-Conjugated Organic Polymers for Use in Electrochromic Devices. Chem. Rev. 2010, 110, 268−320. (40) Lin, P.; Yan, F.; Helen, H. L. W. Improvement of the Tunable Wettability Property of Poly(3-alkylthiophene) Films. Langmuir 2009, 25, 7465−7470. (41) Darmanin, T.; Guittard, F. Superhydrophobic Fiber Mats by Electrodeposition of Fluorinated Poly(3,4-ethyleneoxythiathiophene). J. Am. Chem. Soc. 2011, 133, 15627−15634. (42) Darmanin, T.; Guittard, F. Molecular Design of Conductive Polymers to Modulate Superoleophobic Properties. J. Am. Chem. Soc. 2009, 131, 7928−7933. (43) Darmanin, T.; Guittard, F. Highly Oleophobic Properties of PEDOP Polymers with Short Perfluorobutyl Chains Separated by Long Alkyl Spacers and Amido Connectors. Macromol. Chem. Phys. 2013, 214, 2036−2042. (44) Tarrade, J.; Darmanin, T.; Taffin de Givenchy, E.; Guittard, F. Super Liquid-Repellent Properties of Electrodeposited Hydrocarbon and Fluorocarbon Copolymers. RSC Adv. 2013, 3, 10848−10853. (45) Bellanger, H.; Darmanin, T.; Taffin de Givenchy, E.; Guittard, F. Robustness Tests on Superoleophobic PEDOP Films. Colloids Surf., A 2013, 433, 47−54. (46) Bellanger, H.; Darmanin, T.; Taffin de Givenchy, E.; Guittard, F. Influence of Long Alkyl Spacers in the Elaboration of Superoleophobic Surfaces with Short Fluorinated Chains. RSC Adv. 2013, 3, 5556−5562. (47) Bellanger, H.; Darmanin, T.; Taffin de Givenchy, E.; Guittard, F. Influence of the Intrinsic Oleophobicity and the Surface Structuration on the Superoleophobic Properties of PEDOP Films Bearing Two Fluorinated Tails. J. Mater. Chem. A 2013, 1, 2896−2903. (48) Darmanin, T.; Guittard, F. Superoleophobic Polymers with Metal Ion Affinity toward Materials with both Oleophobic and Hydrophilic Properties. J. Colloid Interface Sci. 2013, 408, 101−106. (49) Merz, A.; Schropp, R.; Doetterl, E. 3,4-Dialkoxypyrroles and 2,3,7,8,12,13,17,18-Octaalkoxyporphyrins. Synthesis 1995, 7, 795. (50) Zong, K.; Reynolds, J. R. 3,4-Alkylenedioxypyrroles: Functionalized Derivatives as Monomers for New Electron-Rich Conducting and Electroactive Polymers. J. Org. Chem. 2001, 66, 6873−6882. (51) Schottland, P.; Zong, K.; Gaupp, C. L.; Thompson, B. C.; Thomas, C. A.; Giurgiu, I.; Hickman, R.; Abboud, K. A.; Reynolds, J. R. Poly(3,4-alkylenedioxypyrrole)s: Highly Stable Electronically Conducting and Electrochromic Polymers. Macromolecules 2000, 33, 7051− 7061. (52) Walczak, R. M.; Jung, J.-H.; Cowart, J. S., Jr.; Reynolds, J. R. 3,4Alkylenedioxypyrrole-Based Conjugated Polymers with Finely Tuned Electronic and Optical Properties via a Flexible and Efficient NFunctionalization Method. Macromolecules 2007, 40, 7777−7785. (53) Honda, K.; Morita, M.; Otsuka, H.; A. Takahara, A. Molecular Aggregation Structure and Surface Properties of Poly(fluoroalkyl acrylate) Thin Films. Macromolecules 2005, 38, 5699−5705. (54) Honda, K.; Morita, M.; Sakata, O.; Sasaki, S.; Takahara, A. Effect of Surface Molecular Aggregation State and Surface Molecular Motion on Wetting Behavior of Water on Poly(fluoroalkyl methacrylate) Thin Films. Macromolecules 2010, 43, 454−460. (55) Young, T. An Essay on the Cohesion of Fluids. Philos. Trans. R. Soc. London 1805, 95, 65−87. (56) Wenzel, R. N. Resistance of Solid Surfaces to Wetting by Water. Ind. Eng. Chem. 1936, 28, 988−994. (57) Cassie, A. B. D.; Baxter, S. Wettability of Porous Surfaces. Trans. Faraday Soc. 1944, 40, 546−551. (58) Marmur, A. Hydro- Hygro- Oleo- Omni-Phobic? Terminology of Wettability Classification. Soft Matter 2012, 8, 6867−6870. 26919

dx.doi.org/10.1021/jp509509p | J. Phys. Chem. C 2014, 118, 26912−26920

The Journal of Physical Chemistry C

Article

(59) Marmur, A. Superhydrophobic and Superhygrophobic Surfaces: From Understanding Non-Wettability to Design Considerations. Soft Matter 2013, 9, 7900−7904. (60) Marmur, A. Wetting on Hydrophobic Rough Surfaces: To Be Heterogeneous or Not To Be? Langmuir 2003, 19, 8343−8348.

26920

dx.doi.org/10.1021/jp509509p | J. Phys. Chem. C 2014, 118, 26912−26920