Subscriber access provided by HACETTEPE UNIVERSITESI KUTUPHANESI
Article
Environmental Risk Implications of Metals in Sludges from Waste Water Treatment Plants: The Discovery of Vast Stores of Metal-containing Nanoparticles Feiyun Tou, Yi Yang, Jingnan Feng, Zuoshun Niu, Hui Pan, Yukun Qin, Xingpan Guo, Xiang-Zhou Meng, Min Liu, and Michael F. Hochella Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.6b05931 • Publication Date (Web): 05 Apr 2017 Downloaded from http://pubs.acs.org on April 7, 2017
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 27
Environmental Science & Technology
1
Environmental Risk Implications of Metals in Sludges from Waste
2
Water Treatment Plants: The Discovery of Vast Stores of
3
Metal-containing Nanoparticles
4
Feiyun Tou †, Yi Yang *, †, ‡, Jingnan Feng †, Zuoshun Niu †, Hui Pan †, Yukun Qin †,
5
Xingpan Guo†, Xiangzhou Meng , Min Liu †, Michael F. Hochella, Jr.§, ||
6
†
7
Geographic Sciences, East China Normal University, 500 Dongchuan Road, Shanghai,
8
200241, China.
9
‡
10 11
⊥
Key Laboratory of Geographic Information Science of the Ministry of Education, School of
Shanghai Key lab for Urban Ecological Processes and Eco-Restoration, East China Normal
University, 500 Dongchuan Road, Shanghai 200241, China ⊥
State Key Laboratory of Pollution Control and Resources Reuse, College of Environmental
12
Science and Engineering, Tongji University, Shanghai 200092, China
13
§
14
24061, USA
15
||
The Center for NanoBioEarth, Department of Geosciences, Virginia Tech, Blacksburg, VA
Geosciences Group, Energy and Environment Directorate, Pacific Northwest National
16
Laboratory, Richland, WA 99352, USA
17
Corresponding author:
[email protected] 18 19
Table of Content Art
1
ACS Paragon Plus Environment
Environmental Science & Technology
20
ABSTRACT
21
Nanoparticle (NP) assessment in sludge materials, although of growing importance in eco-
22
and bio-toxicity studies, is commonly overlooked and, at best, understudied. In the present
23
study, sewage sludge samples from across the mega-city of Shanghai, China were investigated
24
for the first time using a sequential extraction method coupled with single particle inductively
25
coupled plasma mass spectrometry (SP-ICP-MS) in order to quantify the abundance of
26
metal-containing NPs in the extraction fractions, and transmission electron microscopy to
27
specifically identify the nanophases present. In general, most sludges observed showed high
28
concentrations of Cr, Cu, Cd, Ni, Zn and Pb, exceeding the maximum permitted values in the
29
national application standard of acid soil in China. NPs in these sludges contribute little to the
30
volume/mass, but account for about half of the total particle number. Based on electron
31
microscopy techniques, various NPs were further identified, including Ti-, Fe-, Zn-, Sn-,
32
Pb-containing NPs. All NPs, ignored by traditional metal risk evaluation methods, were
33
observed at a concentration of 107 -1011 particles/g within the bioavailable fraction of metals.
34
These results indicate the underestimate or mis-estimation in evaluating the environmental
35
risks of metals based on traditional sequential extraction methods. A new approach for
36
environmental risk assessment of metals, including NPs, is urgently needed.
2
ACS Paragon Plus Environment
Page 2 of 27
Page 3 of 27
Environmental Science & Technology
37
INTRODUCTION
38
The most recent estimation of the production of sewage sludge in China is 40 million tons in
39
2014 (calculated using the estimate that 10,000 tons of wastewater produces 5.6 tons of
40
sewage sludge1), and this production is increasing at an annual average rate of 4.75 percent.2
41
Of this tonnage, 45% is applied to agricultural land, 31% is landfilled, 3% of the sewage
42
sludge is incinerated, and the remaining 21% is used for greening non-agricultural lands
43
and/or discharged directly into rivers.3 Among these destinations, agricultural application and
44
landfilling are most economical.4 However, the land application of sludge is limited by its
45
high concentrations of various metals and other toxic organic pollutants, which in many cases
46
has led to severe degradation of soils and therefore serious secondary environmental pollution.
47
For example, metals in sewage sludge are of significant concern and have been known to pose
48
severe risks to the ecological environment and humans via agricultural application.5-10
49
Besides various metals in sludge, metal-containing nanoparticles (NPs) have a number of
50
origins, morphologies and sizes, atomic structures, and compositions, all of which play an
51
important role in their precise behavior, and as a result, they have gained more and more
52
attention11-28. NPs typically show distinct chemical and physical properties, especially when
53
they are particularly small, relative to the corresponding bulk material, and can induce
54
cytotoxicity, resulting in long term environmental and health risks.11-14 In addition, due to their
55
inherent reactivity with other contaminants, NPs can serve as a carrier and may release toxins
56
through transformation under certain environmental or biological conditions.15-18 It is worth
57
noting that metal containing NPs, such as titanium oxides, iron oxides, and silver and zinc
58
sulfides, have already been identified in sewage sludge and sludge-amended soils.19-23 These
59
NPs can also be taken up by organisms from sludge-amended soil, posing eco-environmental
60
risks.24-28 However, the occurrence and environmental function of NPs in soils and sediments
61
has been challenging to assess.29-31
62 63
As an important traditional method commonly applied to assess the environmental risk of metals, a chemical speciation analysis can indicate the mobility, bioavailability and
3
ACS Paragon Plus Environment
Environmental Science & Technology
64
potential eco-toxicity of metal-containing NPs and help predict their release in soil/sediment
65
environments.32-34 Tessier sequential extraction, known as a sequential extraction method
66
proposed by the European Community Bureau of Reference (BCR sequential extraction)35-36
67
and its variations are the most widely applied extraction methods. For this study, we have
68
chosen a modified BCR sequential extraction method due to its stability for extraction
69
efficiency and ease of application. For this method, metals are divided into an
70
acid-exchangeable fraction, a reducible fraction, an oxidizable fraction, and a residual fraction.
71
The acid-exchangeable fraction, mainly consisting of water soluble, exchangeable and
72
carbonate-bound metals, is readily released into the environment and represents the
73
bioavailable fraction.32 However, until this present study, metal-containing NPs have never
74
been considered in each fraction according to the existing citable literature.
75
It is a great challenge to directly quantify metal-containing NPs in complex
76
environmental samples and further differentiate them from their ionic species. Electron
77
microscopy (EM) techniques, such as scanning transmission electron microscopy (S/TEM)
78
and scanning electron microscopy (SEM), coupled with accessory capabilities such as
79
energy-dispersive X-ray spectroscopy (EDX) and selected area electron diffraction (SAED),
80
have been recognized by the scientific community as powerful tools to provide detailed
81
information including particle size, morphology, chemical composition, and crystal structure
82
on a single-particle basis.19-23 However, application of all of the above mentioned techniques
83
in complicated environmental samples is somewhat limited by the lack of a way to quantify
84
the number of NPs, that is there general abundance, which cannot be provided by the methods
85
described above. Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS)
86
is a relatively new technique to quantify the number of NPs even in complex environmental
87
samples, and also to make an independent estimate of their size distribution. In addition, it can
88
determine both metal concentrations in the dissolved and particulate forms simultaneously.
89
It can also determine the size of NPs to compare with other commercially available
90
techniques such as dynamic light scattering.37 The development of SP-ICP-MS techniques has
91
been well described in other studies,38-39 and it has been successfully applied to directly 4
ACS Paragon Plus Environment
Page 4 of 27
Page 5 of 27
Environmental Science & Technology
92
determine the particle sizes and concentrations of NPs in drinking water, biological tissues,
93
and suncreen37, 40-43, but none to date in sewage sludge materials.
94
This study is designed to estimate the environmental implications of metals in sludge
95
samples, specifically metal-containing NPs. To this end, twenty-six sewage sludge samples
96
were taken from wastewater treatment plants (WWTPs) as a representative sampling
97
throughout the mega-city of Shanghai, China. The feasibility of using traditional risk
98
assessment methods for metals in sludge samples was evaluated, but in this case considering
99
specific NP quantities, sizes, and compositions for the time. The specific objectives of this
100
study are (1) to assess the risk of metals in sewage sludge based on analysis via modified
101
BCR sequential extraction, (2) to reveal the occurrence of metal-NPs (such as Ti-NPs, Fe-NPs
102
and Zn-NPs) in different metal chemical fractions, and to determine the concentration and
103
size distribution of metal-NPs in each chemical fraction, especially in the bioavailable
104
fraction of metals using SP-ICP-MS, and (3) to identify the dominant metal-NPs based on EM
105
techniques.
106
MATERIALS AND METHODS
107
Sample Collection and Pretreatment.
108
Shanghai, with an area of 6340km2 and a population of more than 24 million, is a sprawling
109
megacity in a developing country. With increasing population, motorization, urbanization and
110
industrial activities, the annual wastewater discharge has climbed to 2212 million tons in 2014,
111
with 53 wastewater treatment plants scattered throughout the city.44 Shanghai is suffering
112
tremendous stress from wastewater treatment and its main by-products, including sewage
113
sludge. For this study, sewage sludge samples were collected from 26 WWTPs in Shanghai.
114
Table S1 summarizes the details of the WWTPs. About 2 kg wet weight sewage sludge
115
samples were collected, immediately transported to our Shanghai laboratory, stored at -20℃,
116
freeze-dried and homogenized until further processing.
117
Metal Analysis. 5
ACS Paragon Plus Environment
Environmental Science & Technology
118
In order to determine the total metal concentrations in sewage sludge, all samples were
119
digested according to the EPA-approved, microwave assisted nitric acid digestion method
120
3051A45 in duplicate and then analyzed by a Thermo Electron X-Series ICP-MS
121
(Massachusetts, United States) via Standard Method 3125-B,46 and the calibration standards
122
were prepared in a matrix of 2% nitric acid by volume. In detail, approximately 0.1g
123
freeze-dried samples were pretreated with 2mL of 67% nitric acid (Trace Metal Grade, Fisher)
124
at 90℃ for half an hour and 1mL of 30% hydrogen peroxide (Ultrapure Reagent, Fisher)
125
overnight at 50℃ in 100mL bottles. Then all the reactants were transferred to microwave
126
digestion vessels, with 7mL of 67% nitric acid. After cooling down to room temperature, the
127
vessels were rinsed 3 times with Mill-Q water and the volume was set to 100mLbefore
128
analysis. This method was appropriate for most metals, but not ideal for especially titanium
129
oxides which are exceptionally insoluble.47 Analyzed metals include: Ti, V, Cr, Fe, Mn, Co, Ni,
130
Cu, Zn, As, Se, Sr, Mo, Ag, Cd, Sn, Ba, Ce and Pb.
131
Particle Size Analysis.
132
Laser diffraction particle size analyzer LS13320 (Beckman Counter, California, United
133
States), particle size analysis ranging from 0.017 to 2000µm, was applied for the particle size
134
analysis of the sludge samples. The particle size of blank samples (Milli-Q water) ranged
135
from 17nm to 40 nm, and the actual particle size detection limit was therefore set as 40 nm.
136
All samples were pretreated with 10 mL of 10 % hydrogen peroxide at 100℃ until no
137
bubbles were generated (more hydrogen peroxide solution was added if 10 mL was not
138
sufficient) to reduce the particle aggregation caused by organic compounds. After cooling
139
down to room temperature, 10mL of 36.1g/L sodium hexametaphosphate was added as a
140
stabilizer and the mixture was dispersed by an ultrasonic probe (KQ5200E, Shumei, Kunshan,
141
China) for 10 min.
142
Sequential Extraction Procedure.
143
Sequential extraction was performed with the modified BCR sequential extraction
6
ACS Paragon Plus Environment
Page 6 of 27
Page 7 of 27
Environmental Science & Technology
144
procedure.48 This procedure is described in detail in the supplemental information (Fig. S1).
145
According to the industrial wastewater ratios (IWRs, the volume ratios of the industrial
146
wastewater to the total inflow wastewater), fourteen of the 26 sludge samples (S4, S5, S10,
147
S11, S12, S14, S15, S17, S18, S19, S20, S21, S23 and S26) were chosen to process the
148
sequential extraction procedure in duplicate. Blanks were measured in parallel for each set of
149
BCR-prepared samples. Negligible metal concentrations were detected in all the blanks.
150
SP-ICP-MS Data Acquisition and Processing.
151
To screen for the occurrence of metal containing-NPs in the bioavailable fraction of sludge
152
and further quantify their particle size and concentrations, a PerkinElmer NexION 350D
153
SP-ICP-MS (Massachusetts, United States) was used to analyze the acid-exchangeable
154
extraction solutions (pH 3, acetic acid) of 14 sludge samples (S4, S5, S10, S11, S12, S14, S15,
155
S17, S18, S19, S20, S21, S23 and S26). The instrument was set to detect Zn, Fe and
156
Ti-containing NPs. In addition, as Ti oxide-NPs would not react with extraction reagents,
157
these particles in S26 were further analyzed for the occurrence of NPs in the reducible
158
fraction and oxidizable fraction.
159
Masses of 47Ti (7.3% abundance, Standard Mode), 66Zn (27.9% abundance, Standard
160
Mode) and 56Fe (91.7% abundance, Dynamic Reaction Cell (DRC) Mode) were monitored by
161
SP-ICP-MS, with a dwell time of 100µs and a scan time of no less than 100s. Dissolved
162
element calibrations for titanium, zinc and iron were prepared in a matrix of 2% nitric acid by
163
volume, and Au-containing NPs stabilized with citrate in the size of 30 nm and 60 nm from
164
the National Institute of Standards and Technology (NIST) were used as particle calibration
165
standards. Particle size and dissolved element detection limits (according to the results of
166
Milli-Q water) were determined to be 15-20 nm and 0.13 µg/L for Ti, 15-16 nm and 0.30 µg/L
167
for Zn, and 12-17 nm and 0.10 µg/L for Fe, respectively. To get appropriate particle
168
concentration, tested samples were diluted 100~10000 times and the results are summarized
169
in Table S6.
170
Electron Microscope Analysis. 7
ACS Paragon Plus Environment
Environmental Science & Technology
171
Selected samples (S11, S12, S18 and S21) were characterized using electron microscopy
172
techniques. An Environmental Scanning Electron Microscope (ESEM, FEI Quanta 600 FEG,
173
Oregon, United States), equipped with an energy dispersive X-ray spectrometer (EDS,
174
QUANTAX 400, Bruker, Karlsruhe, Germany) system, and a Transmission Electron
175
Microscope (TEM, JEOL 2100 TEM, Tokyo, Japan), coupled with EDS and selected area
176
electron diffraction (SAED), were applied to characterize the morphology, composition and
177
crystal structures of the NPs.
178
RESULTS AND DISCUSSION
179
Total Concentrations of Metals in Sludge Samples.
180
Total concentrations of Ti, V, Cr, Fe, Mn, Co, Ni, Cu, Zn, As, Se, Sr, Mo, Ag, Cd, Sn, Ba, Ce,
181
and Pb in sludge samples are shown in Figure 1. Fe is the most abundant metal (8.1-54.5
182
gkg-1), with an average concentration of 22.7 gkg-1 which is 1-5 orders of magnitude higher
183
than all other metals. Ag exhibited the lowest abundance (0.25-29.6 mgkg-1), with an average
184
of 5.4 mgkg-1 in all sludge samples. Zn and Cu, with an average concentration of 2091.6 and
185
908.4 mgkg-1, respectively, are the second and third most abundant metal contaminants.
186
Noticeably, the concentrations of lead in S21 (2007.1 mgkg-1) and S11 (446.2 mgkg-1) are
187
much higher than those in other sludge samples, ranging from 21.3 to 198.1 mgkg-1. The
188
elevated concentrations of lead in these two samples can likely be attributed to the occurrence
189
of metallic material processing works and metal smelting factories in the S21 and S11 service
190
areas, respectively. In addition, the concentrations of cadmium in S5 (170.6 mgkg-1) and
191
cobalt in S18 (803.2 mgkg-1) are 1-2 orders of magnitude higher than those in other sludge
192
samples, ranging from 0.67 to 4.4 mgkg-1 and 2.7 to 91.9 mgkg-1, respectively. It is likely
193
that these elevated concentrations are due to the electroplating factories and petrochemical
194
industries in both S5 and S18 service areas.
195
It is noticeable that the concentrations of Cr, Ni, Cu, Zn in Shanghai sludge samples are
196
2~3 times higher than those found in the samples collected from 193 WWTPs in 111 cities of
8
ACS Paragon Plus Environment
Page 8 of 27
Page 9 of 27
Environmental Science & Technology
197
China,49 which are likely reasonable averages of heavy metal pollution levels from WWTP
198
sludges in urban China; likewise, the concentration of Pb across Shanghai is 32% higher than
199
the average concentration in the China-wide study (Table S3). In addition, the concentrations
200
of Cr, Ni, Cu, Zn, Cd, and Pb in this study are higher than the permissible values for acid soils
201
(issued by the Ministry of Environmental Protection of the People’s Republic of China in
202
2002) in 3.8 to 38.5% of the samples, depending on the metal.50 According to the results from
203
a sewage sludge survey launched by the U.S. Environmental Protection Agency (EPA),51 the
204
concentrations of Cd, Cr, and Pb in U.S. sludge samples are lower than those in Shanghai
205
sludge according to the present study. However, the silver concentrations in U.S. sludge
206
samples are more than ten times higher than those in Shanghai sludge samples.
207
The correlation coefficient matrix among different metal elements as well as IWR (Table
208
S1, analyzed by IBM SPSS Statistics 23.0) of WWPTs shows that there are significant
209
correlations between Ti, V, Cr, Co, Cu, Se, Sr, Mo, Cd, Ce and IWR (Table S3), indicating
210
that industrial wastewater are likely an important input of these heavy metal contaminants to
211
sewage sludge. Meanwhile, in most samples, Ti, Cr, Fe, Co, Ni, Cu, Zn, As, Mo, Ag, Sn, and
212
Pb are significantly correlated with each other at the 0.01 level, and the higher correlations (r >
213
0.8) are observed between V and Co, Cr and Cu, and As and Pb, suggesting their similar or
214
the same origins.52-54
215
Particle Size Analysis of Sludge Samples.
216
The particle size distributions of sludge samples, plotted as a function of volume percent for
217
each size fraction, are plotted in Figure S2. It is obvious that the large particles (>1000 nm),
218
with an average volume percent of 90.3 %, is the dominant fraction of total volume, while the
219
nanoparticles (