Exploring the Potential of Protein-Based Pharmacophore Models in

Apr 26, 2013 - Protein-based pharmacophore models derived from protein binding site atoms without the inclusion of any ligand information have become ...
5 downloads 0 Views 2MB Size
Article pubs.acs.org/jcim

Exploring the Potential of Protein-Based Pharmacophore Models in Ligand Pose Prediction and Ranking Bingjie Hu and Markus A. Lill* Department of Medicinal Chemistry and Molecular Pharmacology, College of Pharmacy, Purdue University, 575 Stadium Mall Drive, West Lafayette, Indiana 47906, United States S Supporting Information *

ABSTRACT: Protein-based pharmacophore models derived from protein binding site atoms without the inclusion of any ligand information have become more popular in virtual screening studies. However, the accuracy of protein-based pharmacophore models for reproducing the critical protein− ligand interactions has never been explicitly assessed. In this study, we used known protein−ligand contacts from a large set of experimentally determined protein−ligand complexes to assess the quality of the protein-based pharmacophores in reproducing these critical contacts. We demonstrate how these contacts can be used to optimize the pharmacophore generation procedure to produce pharmacophore models that optimally cover the known protein−ligand interactions. Finally, we explored the potential of the optimized protein-based pharmacophore models for pose prediction and pose rankings. Our results demonstrate that there are significant variations in the success of protein-based pharmacophore models to reproduce native contacts and consequently native ligand poses dependent on the details of the pharmacophore generation process. We show that the generation of optimized protein-based pharmacophore models is a promising approach for ligand pose prediction and pose rankings.



INTRODUCTION Pharmacophore models aim to reproduce the features of ligand−protein interactions that are most crucial for binding and biological activity. These models are used for virtual screening to identify potential new actives or for generating ligand alignments for subsequent QSAR simulations. Pharmacophore models are typically derived from analyzing the similarity of several known actives. A number of methods1−5 have been developed to deduce structural features common to biologically active ligands that are hypothesized to be important for biological activity. If experimental information about the three-dimensional structure of the binding pocket is known, these data can guide the optimization of the pharmacophore model. In the program LigandScout,6 for example, interactions between protein and ligand in an experimentally determined protein−ligand structure guide the pharmacophore selection process. All previously described ligand-based pharmacophore models are dependent on the chemical features present in the known actives. Physicochemical features that are absent in the particular set of actives but are important for the binding of structurally different ligands will likely be neglected in the pharmacophore model. Alternatively, the binding site of the target protein can be used to generate a protein-based pharmacophore model without the inclusion of ligand information. These protein-based pharmacophore models are advantageous because a priori knowledge of active ligands is not © 2013 American Chemical Society

required, and the models are not biased by the chemical space of previously identified actives. Several approaches7−9 have been developed to derive the protein-based pharmacophore models from ligand-free proteins. Molecular interaction fields (MIFs) are usually used as the first step in deriving pharmacophore models solely based on the protein structure.10 To generate the MIFs, a 3D grid is projected onto the binding site of interest, and the interaction energies at each grid point are computed between the protein and several molecular probes each with different physicochemical properties. Finally, pharmacophores can be derived from the MIFs via a variety of different methods. For example, the structure-based pharmacophore7 (SBP) method implemented in Discovery Studio uses clustering methods to convert LUDI11 interaction fields into pharmacophore queries. It is possible that some critical protein−ligand interactions will be lost during the conversion from the MIFs to the pharmacophore models. However, the accuracy of protein-based pharmacophore models for reproducing the critical protein−ligand interactions has never been explicitly assessed. In this study, we use known protein−ligand interactions from a large set of experimentally determined protein−ligand complex structures to assess the quality of the protein-based pharmacophores in reproducing these critical contacts. The Received: January 9, 2013 Published: April 26, 2013 1179

dx.doi.org/10.1021/ci400143r | J. Chem. Inf. Model. 2013, 53, 1179−1190

Journal of Chemical Information and Modeling

Article

Figure 1. Overall procedure for pharmacophore model optimization and testing.

three protein−ligand complexes with different binding affinities. This “core set” provides an ideal divergent set for our study. All the protein−ligand complexes in the PDBbind core set were preprocessed with the hydrogen atoms added and were therefore used directly without additional preparations. All the 210 protein−ligand complexes were used for the optimization of the protein-based pharmacophore generation program. However, due to various reasons, 20 protein−ligand complexes are excluded from the pose prediction and ranking study. A detailed reason for exclusion of those complexes can be found in S1 of the Supporting Information. Protein Pharmacophore Generation. In this paper, the term “protein-based pharmacophores” and “protein pharmacophores” were used interchangeable. They both refer to the potential interaction sites for the ligand that could interact with the protein atoms in the binding site. They can be viewed as the negative or complementary image of the protein binding site. There are four types of protein pharmacophores: hydrogenbond donor/acceptor, hydrophobic, aromatic, and ionic pharmacophores. In addition, the exclusive volume of the protein was also represented by so-called forbidden pharmacophores, representing the portion of the protein that would overlap with ligand atoms placed in this moiety. To generate protein-based pharmacophore elements, a 3D grid with 0.4 Å spacing between grid points was placed in the binding site for each protein structure. The interaction potentials (hydrogen-bond donor/acceptor, hydrophobic, aromatic, and ionic) between the protein atoms and probes representing hypothetical ligand atom were computed on each grid point. The interaction potentials for hydrogen bonding and hydrophobic probes placed at the grid points were computed using a continuous form of the ChemScore14,15 scoring function. The aromatic and ionic interactions were calculated using a functional form similar to ChemScore. The detailed equations are presented in S2 of the Supporting Information. The pharmacophores were generated using the computed interaction energies with the probes on the 3D grid points. The hydrophobic pharmacophores were computed by a k-means clustering over all grid points with favorable hydrophobic

rationale is that the known protein−ligand interactions need to be represented by the protein pharmacophore elements in order to correctly model critical protein−ligand interactions in studies utilizing those pharmacophore models. Consequently, a successful pharmacophore model should, ideally, cover all known interactions between a protein and its ligands. We will first present our methodology to generate proteinbased pharmacophore models based on interaction fields. We then will demonstrate how the pharmacophore generation procedure can be optimized to produce pharmacophore models that optimally cover the known protein−ligand interactions. Typically, the generated protein-based pharmacophore models will be curated to form the workable queries for virtual screening. Little attention has been paid to investigate the application of the protein-based pharmacophores for ligand pose prediction and pose rankings. In this study, we will explore the potential of using optimized protein-based pharmacophore models for pose prediction and pose rankings. We will show that there are significant variations in the success of proteinbased pharmacophore models to reproduce native contacts and consequently native ligand poses dependent on the details of the pharmacophore generation process.



MATERIALS AND METHODS The overall procedure to generate and test optimal protein pharmacophore models is depicted in Figure 1. Different parameters are adjusted to optimally reproduce protein−ligand interaction contacts observed in X-ray complex structures. In the pose generation phase, the clique detection and scoring function are subsequently optimized for the models selected in the previous optimization step. The details of this optimization procedure are discussed in the following sections. Data Set. The “core set” of the PDBbind12,13 database (version 2007) was used for this study. The PDBbind database provides a “refined set” that consists of 1300 protein−ligand complexes that were compiled particularly for docking/scoring studies. From the “refined set”, 210 protein−ligand complexes were nonredundantly sampled to form the so-called “core set”.12 It covers 70 different proteins, each of which contains 1180

dx.doi.org/10.1021/ci400143r | J. Chem. Inf. Model. 2013, 53, 1179−1190

Journal of Chemical Information and Modeling

Article

scores. The hydrophobic pharmacophore element was then defined as the energy-weighted geometric center over all grid points of a particular cluster. The number of clusters, k, was adjusted until the minimum distance between a cluster center i and any other cluster center was on average smaller than a certain distance cutoff. Five cutoff values, 1.0, 1.5, 2.0, 2.5, and 3.0 Å, were used. The influence of cluster distance on pose prediction quality was investigated and will be discussed in the following sections. Unlike hydrophobic pharmacophores, which represent the presence of several hydrophobic atoms in a hydrophobic moiety, hydrogen-bond, aromatic, and ionic interactions are typically more specific interactions with an individual functional group of the protein. Therefore, k-means clustering to generate hydrogen-bond, aromatic, and ionic pharmacophores was performed over the grid points associated with the same nearest functional group. For example, in generating a hydrogen-bond donor pharmacophore, the program iterates through all protein acceptors and groups the grid points closest to the same acceptor into one patch. The k-means clustering was then performed within this patch. Analogous to the generation of the hydrophobic pharmacophores, five different cutoff values were investigated throughout clustering. In addition to k-means clustering, a scheme that simply defines one pharmacophore by the energy-weighted geometric center of a patch was tested for hydrogen bonding, aromatic, and ionic pharmacophores. In detail, the center of the pharmacophore was computed by c=

∑i xi × εi

Figure 2. Example of influence of “interaction range for pharmacophore generation” (IRFPG) parameter on generation of hydrophobic pharmacophores. The hydrophobic grid points are shown as circles and color coded according to cluster membership. The cluster center is depicted as large circle and represents the pharmacophore. In (a), the minimum and maximum range of hydrophobic interactions are following the values of the scoring function. In (b), the maximum range of interaction is reduced compared to the maximum range of the scoring function.

interactions, or hydrophobic contacts, but neglects long-range interactions, e.g., electrostatics. In a contact map, the “contact” points were positioned onto the ligand heavy atoms. Corresponding to the types of the pharmacophores, there were four types of protein−ligand contacts: hydrogen bonding, hydrophobic, aromatic, and ionic contacts. The identification of hydrogen bonding, hydrophobic, and ionic atoms as well as the center of the aromatic ring were identical to those used to define the ligand pharmacophore elements described in the Ligand Conformation and Pharmacophore Generation section. The same scoring function as described under Protein Pharmacophore Generation was used for calculating the interaction strength between the protein and ligand heavy atoms in an X-ray structure. If there was a favorable interaction, i.e., negative score, between a given ligand−protein atom pair, a contact was defined between both atoms, and a contact point would be positioned onto the ligand heavy atom involved in that interaction. This procedure was performed on all X-ray complex structures of our curated database. Contact Coverage by the Protein Pharmacophores. As described in the Protein Pharmacophore Generation section, the IRFPG and the cluster distances are parameters that influence the location of the generated pharmacophore elements. Ideally, the generated protein pharmacophores should co-localize with the known ligand−protein contacts in the X-ray structure of the associated protein−ligand complex. Therefore, the degree to which the generated protein pharmacophores covered the known protein−ligand contacts was a valuable criterion for identifying the best set of parameters in the protein pharmacophores generation process (Figure 1). In this study, the PDBbind core set was used as the training set to achieve this purpose. We first generated the protein−ligand contact map for each complex from the core set as described in the Protein−Ligand Contacts Analysis section. The protein−ligand contact maps were then matched onto the protein pharmacophore models to

(1)

The sum is over all grid points i associated with the same functional group, i.e., the grid points from the same patch; xi and εi are the coordinates and interaction potential of each grid point, respectively. In the pharmacophore generation process, the scoring function used to compute the interactions between protein atoms and probes was empirically derived. The interaction strength decreases with distance between protein atom and probe. The pharmacophore elements were derived using clustering of the grid points, which can shift the center of a cluster to larger distances compared to the optimal distance, i.e., maximum interaction strength, between protein and ligand atoms (Figure 2a). Thus, we limited the distance range of favorable interactions between protein and ligand probes for pharmacophore generation, i.e., minimum and maximum cutoffs were introduced to the scoring function (Figure 2b). We investigated how the identification of the pharmacophore elements was influenced by the allowed interaction range, which was named “interaction range for pharmacophore generation” (IRFPG) throughout the paper. The IRFPGs tested for different interaction types are listed in Figure 3. Throughout the posing phase, ligand poses that overlapped with the protein would be ranked lower or removed from the pool of potential poses. For this process, forbidden pharmacophore elements were determined that represented the residues forming the binding site. Those pharmacophores were generated by clustering over all grid points that are closer than 2 Å to a heavy atom of a protein residue. A cluster radius of 1.5 Å was chosen. Protein−Ligand Contacts Analysis. A protein−ligand contact map represents the localized interactions between the ligand and protein atoms, such as hydrogen bonding, aromatic 1181

dx.doi.org/10.1021/ci400143r | J. Chem. Inf. Model. 2013, 53, 1179−1190

Journal of Chemical Information and Modeling

Article

Figure 3. Heat map of the overall contact coverage rate and percentage of the covering pharmacophore for hydrogen bonding, aromatic, ionic, and hydrophobic pharmacophores. For each pharmacophore type, the upper panel shows the overall contact coverage rate and the lower panel shows the percentage of the covering pharmacophores. The results in each column are from the same IRFPG, whereas the results in each row are from the same distance cutoffs for clustering. GC: energy-weighted geometric center.

The first measure determined the percentage of contacts the pharmacophore model was able to reproduce, whereas the second measured the enrichment of the covering pharmacophores in the pharmacophore model. Ligand Conformation and Pharmacophore Generation. In our study for prediction of native ligand poses, both the native conformer and low-energy conformers were used as inputs. The low-energy conformers were generated by OpenEye Omega.16 For each ligand, a maximum of 1000 conformations were generated with the calculated internal energy no more than 15 kcal/mol above the energy of the ligand conformation with the lowest internal energy. Duplicate conformers were removed using a 0.2 Å root-mean-square deviation (RMSD) cutoff for ligands with zero to three rotatable bonds, a 0.3 Å cutoff for ligands with four to six rotatable bonds, and a 0.4 Å cutoff for all ligands with more than six rotatable bonds.

identify how well the contacts were reproduced by the pharmacophore elements. A contact was covered by the pharmacophore model if at least one protein pharmacophore element with the same interaction type was located within 1 Å of the contact. The pharmacophore element that covered a contact was named a “covering pharmacophore”. For identifying the optimal set of parameters, i.e., IRFPG values and cluster distances, during pharmacophore generation, two values were calculated for each setting Contact coverage rate =

Number of contacts being covered Total number of contacts

Percentage of covering pharmacophores Number of covering pharmacophores = Total number of covering pharmacophores 1182

dx.doi.org/10.1021/ci400143r | J. Chem. Inf. Model. 2013, 53, 1179−1190

Journal of Chemical Information and Modeling

Article

where w is the weighting factor ranging from −1.0 to 0.0 and was optimized as described in the following section, and f(r) is a distance-dependent function that measures the spatial separation of protein and ligand pharmacophores of a matching pharmacophore pair

The in-house program clusterconformer was then used to generate the pharmacophore elements for each ligand conformation. Four types of pharmacophores were defined for each ligand: hydrogen-bond donor/acceptor, hydrophobic, aromatic, and ionic pharmacophores. Hydrogen-bond pharmacophores are placed at the position of potential donor and acceptor groups of the ligand. Hydrogen-bond donors are polar hydrogen atoms bonded to oxygen, nitrogen, and sulfur atoms, and acceptors are oxygen, nitrogen and sulfur atoms with at least one lone pair. Ligand atoms (excluding hydrogen atoms) were defined to be hydrophobic if they were not hydrogenbond donors or acceptors or directly bonded to a ligand’s donor or acceptor atoms. The hydrophobic atoms from each ligand conformation were clustered using hierarchical clustering with a minimum distance between cluster centers of 2.0 Å. Clustering was performed to reduce the number of hydrophobic ligand pharmacophores. This significantly reduced the cost of clique detection and consequently increased the efficiency of pose prediction. Aromatic pharmacophores were defined as centers of aromatic rings. Ionic groups included functional groups that were formally charged positive or negative, e.g., protonated amines or deprotonated carboxylic acids, were placed at the centroids of the functional group. Prediction of Ligand Poses. Our in-house program, PharmPose, was used to sample ligand poses in the generated pharmacophore model. The sampling process is based on a modified Bron−Kerbosch clique detection algorithm17,18 that enumerates all possible multipoints (≥3) matches of protein and ligand pharmacophores. First, the length of the edge between each pair of ligand pharmacophores was determined. The edge lengths were also determined for each protein pharmacophore pair. All ligand pharmacophore edges that matched the protein pharmacophore edges, based on the pharmacophore types (hydrogen bond donor/acceptor, hydrophobic, aromatic, and ionic interactions) of their vertices and edge lengths, were identified. Throughout the matching process, a tolerance for the edge lengths was allowed, and the optimal value of this edge tolerance was studied as will be described in subsequent sections. The matching process can be represented by a graph in which each node represents a matching ligand−protein pharmacophore pair. The clique detection algorithm then identified all the completely connected subgraphs from this graph. The Kabsch algorithm19 was then used to spatially align the ligand pharmacophore elements to the matching protein pharmacophores in each clique, thus placing the ligand into the protein binding site. To avoid steric clashes between ligand and protein atoms, the number of heavy atoms of the ligand that were located within 1.3 Å to any of the forbidden pharmacophores was counted for each ligand pose. If more than 10% of the ligand’s heavy atoms overlapped with forbidden pharmacophores, the pose was rejected. Pharmacophore-Based Pose Ranking. The ligand poses sampled by PharmPose were scored and ranked using a simple geometric scoring function based on the matching pharmacophore pairs formed by each ligand pharmacophore and its closest protein pharmacophore of the same type S = whbond ×

⎧ 1.0 r ≤ 0.5Å ⎪ f (r ) = ⎨ 2 × (1.0 − r ) 0.5Å < r ≤ 1.0Å ⎪ ⎩ 0 r > 1.0Å

r is the distance between the ligand pharmacophore and its closest matching protein pharmacophore of the same type. It is noteworthy that eq 2 calculated the score of a pose based on all the ligand pharmacophores rather than only those involved in forming cliques. Optimization of Pose Prediction and Pose Ranking. To identify optimal protein pharmacophore models for pose prediction, three pharmacophore models were chosen that were able to accurately reproduce native protein−ligand contacts. In the next step of optimization, we used clique detection and the pharmacophore-based scoring function to generate and rank poses, aiming to reproduce native binding modes (Figure 1). In the clique detection process, the distance tolerance in the edge matching process is a critical parameter for both sampling accuracy and time efficiency. A larger edge tolerance will result in a higher number of matching edges and cliques. This search will generate a larger ensemble of sampled poses, which increases the probability of recovering a native-like pose. However, the computational efficiency suffers from larger edgelength tolerances, as the number of matching cliques will linearly increase with the number of the matching edges.18 In addition, variation in distance cutoffs throughout the kmeans clustering was studied. The number of protein pharmacophores would become very large when a small distance cutoff is used. Consequently, a smaller edge tolerance is preferred to allow the completion of pose sampling within a reasonable amount of time. Therefore, a benchmark study was performed, using the native conformation of each ligand as the input, in order to achieve the best trade-off between the sampling accuracy and time efficiency. Throughout this phase of pharmacophore optimization, the native ligand conformation was chosen to remove any uncertainty introduced by ligand conformations that do not resemble the native form. In detail, the ligand pharmacophores were generated for the native conformation of each ligand in the PDBbind core set following the method described in Ligand Conformation and Pharmacophore Generation section. This native ligand pharmacophore model was then matched onto different protein pharmacophore models (variation in IRFPG and cluster distance) with different edge tolerances. The poses sampled from each run were assessed for their RMSD to the native binding pose of the ligand. The CPU time needed for the whole process was also recorded for analyzing the efficiency of the process. After determination of the optimal combination of pharmacophore model (IRFPG value and cluster distance) and edge tolerance for the reproducibility of native-like poses and sampling efficiency, the binding poses sampled from this model were scored by eq 2. All weighting factors were initially set to one. The performance of this equally weighted scoring function was then evaluated on the top 100-ranked poses by its ability to reproduce the native-like poses for each protein− ligand complex in the PDBbind core set. The best pose RMSD,

∑hbond f (r) + whphob × ∑hphob f (r)

+ warom ×

∑arom f (r) + wionic × ∑ionic f (r)

(3)

(2) 1183

dx.doi.org/10.1021/ci400143r | J. Chem. Inf. Model. 2013, 53, 1179−1190

Journal of Chemical Information and Modeling

Article

cophore models. As mentioned in the Materials and Methods section, the IRFPG and the cluster distance strongly influenced the location of the pharmacophore elements. Variation of these two parameters generated an ensemble of pharmacophore models that were assessed for the potential to reproduce the known contact maps. For hydrogen bond and aromatic pharmacophore types, we tested four different IRFPG and six different cluster distances, resulting in a total of 24 sets of parameters for these two pharmacophore types (Figure 3). For hydrophobic and ionic pharmacophores, the utilized potential functions have a wider range of interactions. Therefore, ten and five different IRFPG values were tested for them, respectively. To measure the quality of the parameter sets for reproducing native contacts, two fitness values were calculated: the overall contact coverage rate, which measures how many of the known ligand−protein interactions are reproduced by a given pharmacophore model, and the percentage of the covering pharmacophores, which measures the enrichment of the covering pharmacophore in the given pharmacophore model. A 100% contact coverage rate of a pharmacophore model would indicate that the graph of known protein−ligand interactions is a subgraph of the given pharmacophore model, i.e., there exists a clique in the set of pharmacophore elements that overlays with all native contacts within a certain distance uncertainty. Consequently, in pose prediction studies, an exhaustive search using clique detection should be able to retrieve the native binding pose using such optimal pharmacophore models as long as the native ligand conformation can be reproduced. On the other hand, a high percentage of the “covering pharmacophore” would suggest a high enrichment of pharmacophore elements representing the key protein−ligand interactions. The predicted poses using such pharmacophore models would potentially have a higher true positive rate than the poses predicted from a model with lower covering pharmacophore rate. Therefore, an ideal pharmacophore model for pose prediction should have both a high contact coverage rate and a high percentage of covering pharmacophores. The contact coverage rates and percentage of the covering pharmacophores for the four pharmacophore types are shown in Figure 3. It is obvious from this heat map that variation in IRFPG has a significant impact on the quality of the pharmacophore model. It also demonstrates that the suggested optimal IRFPG value is very consistent across the different cluster distances. For example, with regards to hydrogen bond pharmacophores, the highest contact coverage rates were observed for IRFPG equal to the range 2.5−3.4 Å, no matter which cluster distance was used. This is also true for ionic pharmacophores where the IRFPG of 2.5−5.4 Å gives the best contact coverage rates. For aromatic and hydrophobic pharmacophores, a slight variation of best IRFPG as a function of cluster distance was observed. However, including the percentage of covering pharmacophores in our consideration, the IRFPG of 3.5−5.4 Å and 3.5−6.1 Å are optimal for aromatic, and 3.0−5.0 Å is the best choice for hydrophobic pharmacophores. Therefore, in the remainder of this paper, all pharmacophore models were generated using these optimal IRFPG ranges, and IRFPG of 3.5−6.1 Å was used for aromatic pharmacophores. Figure 3 also shows that the contact coverage rate decreases with increasing cluster distances. This is not surprising, as a larger cluster distance will result in a sparser pharmacophore model. Such sparse models will less likely cover all known

i.e., the minimal RMSD between the sampled poses to the native binding pose denoted as RMSDmin, was calculated. The average RMSDmin over the studied protein−ligand complexes was reported to assess the overall sampling performance. In addition, the percentages of complexes that were successfully predicted with poses within 1, 2, and 3 Å RMSD to the native conformation were also used to evaluate the overall performance of pose generation and ranking. The equally weighted function assumed that each type of pharmacophore element contributed equally to protein−ligand interactions. However, as seen in many empirical scoring functions14,20 used for docking, different types of interactions were weighted differently to better reproduce protein−ligand binding affinity. Therefore, a training process was performed to optimize the weights of the function in eq 2. To accelerate the optimization process, the top 1000 poses of each protein− ligand complex ranked by the equally weighted function were used as the input data. A systematic optimization scheme was adopted. First, each prefactor w in eq 2 was systematically altered from −1.0 to 0.0 with an increment of 0.1. This leads to 114 different sets of prefactors, each of which corresponds to a differently weighted scoring function. The poses were then rescored and re-ranked by each of the scoring functions. The fitness of each function was assessed using the receiver operating characteristic (ROC) curve. In detail, for each protein−ligand complex, the poses with a RMSD less than or equal to 2 Å to the native pose were labeled as active and those with RMSD beyond 2 Å were labeled as decoys. A ROC curve displaying the fraction of ranked actives at a given fraction of the ranked decoys was then plotted for each protein−ligand complex. The area-under-the-curve (AUC) was calculated for each curve. Finally, the average AUC over all the protein− ligand complexes was used to measure the fitness of each set of prefactors.



RESULTS AND DISCUSSION Optimization of Protein Pharmacophore Generation Methodology. Protein pharmacophores derived from the protein binding site atoms without the inclusion of any ligand information have been used in various virtual screening studies.7,21 The term “protein pharmacophores” refers to the functional groups of hypothetical ligands that potentially interact with the atoms of the protein binding site. In this perspective, pharmacophores can be viewed as the negative or complementary image of the protein binding site. In our approach, the elements of a protein pharmacophore were derived by computing the interaction energy between molecular probes placed on a 3D grid in the binding site with the protein residues and subsequent clustering of proximate grid points with similar properties (see Materials and Methods section for details). As mentioned in the Introduction, it has never been systematically investigated if the critical protein−ligand interactions observed in experimental structures are well preserved during this pharmacophore generation process. Therefore, in our study, we assessed the quality of the pharmacophore models in reproducing the key protein−ligand interactions observed in the protein−ligand complex structure of the PDBbind core set. First, a contact map representing the known protein−ligand interactions was generated for each protein−ligand complex in the data set. The protein pharmacophore models were then superimposed with the contact map to assess how well the protein−ligand interactions were reproduced by the pharma1184

dx.doi.org/10.1021/ci400143r | J. Chem. Inf. Model. 2013, 53, 1179−1190

Journal of Chemical Information and Modeling

Article

workable queries for virtual screening. On the other hand, protein-based pharmacophore models are, by definition, enriched with the information of potential interactions between other ligands with novel scaffold and the protein target. Consequently, another application of the protein-based pharmacophore models is to use them for ligand pose prediction and pose ranking. The use of the protein pharmacophores as “site points” for pose sampling in some pioneer docking programs11,23−25 can be viewed as such application examples. To explore the potentials and limits of our protein-based pharmacophore models for pose prediction and pose ranking, we investigated their ability in reproducing the native-like binding poses using the in-house program PharmPose. As described in the Materials and Methods section, PharmPose is based on a clique detection algorithm.17,18 It enumerates all the possible multiple point matches between ligand pharmacophores and protein pharmacophores. In this process, an edge tolerance that defines the uncertainty allowed for matching the distances of the pharmacophore edges significantly influences the accuracy and efficiency of pose prediction. For a model with a large number of pharmacophore elements, a small edge tolerance value may be necessary to reduce the possible number of matches between ligand and protein pharmacophores and lower the computational time for pose sampling. However, this reduction in sampling space might potentially cause a reduced probability to generate the native binding pose. Therefore, we screened different combinations of edge tolerance and cluster distance to identify the best combination for pose prediction. To study the relationship between size of protein-based pharmacophore models and the edge tolerance, we performed a native pose prediction study using the native ligand conformation as input. This approach removes any additional uncertainty in the pose prediction due to difficulties in pregenerating native-like ligand conformations. We first generated the pharmacophore features for each native ligand conformation in the PDBbind core set. The in-house program PharmPose was then used to sample all possible matches between the ligand pharmacophores and the corresponding protein-based pharmacophore models. To accelerate the pose sampling process, only hydrogen bonding and hydrophobic pharmacophores were used in the clique detection process. This can be substantiated by examining the average number of ligand−protein contacts found in the PDBbind core set (Table 1); on average only one aromatic interaction and less than one ionic interaction per protein−ligand complex is observed in the known protein−ligand complexes. Therefore, considering only hydrogen bond and hydrophobic pharmacophores in the clique detection should be sufficient to generate native-like poses. The investigated settings for pharmacophore−model generation and edge tolerance are listed in Table 2. The average RMSDmin values, which measure the minimal RMSD between the sampled poses to the native binding pose, and the percentages of the protein−ligand complexes having native-like poses with an accuracy of 1, 2, and 3 Å RMSD, are also reported in Table 2. In general, for the same pharmacophore model, prediction accuracy increases as the edge tolerance increases. A larger edge tolerance results in a larger pool of predicted poses and therefore a higher probability for finding native-like poses. However, this increase in accuracy is accompanied by a reduction in the sampling efficiency measured by the average CPU time of pose generation per complex. For instance, for a pharmacophore model with a 1 Å cluster distance for both

contacts. In parallel, the percentage of the covering pharmacophore does not change significantly with variation in cluster distance. This is a result of the compensatory effects of a decreasing number of covering pharmacophores and a decreasing total number of pharmacophores (S3, Supporting Information). It is noteworthy that for hydrogen bond, aromatic, and ionic pharmacophores a method that defines the pharmacophores based on the energy-weighted geometric center (GC) of the grid points was also tested. This method resulted in the sparsest pharmacophore models and showed a significant drop in performance compared to models resulting from k-means clustering. Recently Tintori et al.9 reported the pharmacophore generation approach based on the MIFs calculated by the popular GRID22 program. They used several criterions to select the points of minimum energies on MIFs as the pharmacophore elements. Although our energy-weighted geometric center does not directly coincide with the minimum energy position, our results nevertheless suggest that using the minimum energy positions might be inadequate to cover the critical protein−ligand interactions. In summary, considering both the contact coverage rate and enrichment of the covering pharmacophores, it seems that a 1 Å cluster distance is the best option for reproducing the native contacts and, consequently, might be the optimal choice for subsequent pose prediction using protein−pharmacophore models. However, taking the absolute number of pharmacophores into consideration (Table 1), the 1 Å cutoff might not Table 1. Number of Protein Pharmacophores and Number of Contacts Averaged over All Protein−ligand Complexes for Each Interaction Typea distance cutoff for clustering (Å)

hydrogen bond

hydrophobic

aromatic

ionic

1.0 1.5 2.0 2.5 3.0 GC average number of contacts

554 305 225 189 174 79 4

343 114 62 40 29 N/A 10

119 60 42 33 28 9 1

219 88 53 37 29 7 0.4

a

Only the pharmacophore models generated using the optimal IRFPG (hydrogen -bond, 2.5−3.4 Å; hydrophobic, 3.0−5.0 Å; aromatic, 3.5− 6.1 Å; and ionic, 2.5−5.4 Å) are shown. GC: energy-weighted geometric center.

be the optimal choice for clique detection as the computation efficiency decreases exponentially as the number of pharmacophores increases. For example, the number of hydrogen bond pharmacophores generated using 1 Å radius (554) is more than twice the number of pharmacophores generated using a 2 Å radius (225). As shown in the next section, to achieve the same performance in pose prediction, the high density pharmacophore map generated using 1 Å cutoff requires a much smaller edge tolerance and is more resource demanding than a sparser pharmacophore model. Pharmacophore-Based Poses Prediction and Ranking Using Native Conformation. Protein-based pharmacophore models are traditionally used for virtual screening purposes.7−9 Because the size of the pharmacophore model is typically quite large, a selection of pharmacophore points that are most critical for binding known ligands is usually needed to generate 1185

dx.doi.org/10.1021/ci400143r | J. Chem. Inf. Model. 2013, 53, 1179−1190

Journal of Chemical Information and Modeling

Article

Table 2. Sampling Accuracy and Efficiency of Pharmacophore-Based Pose Prediction Using the Native Ligand Conformation as Inputa pharmacophore model and pose sampling settings

poses sampling results

hydrogen bonding (Å)

hydrophobic (Å)

edge tolerance (Å)

RMSDmin (Å)

%comp