Subscriber access provided by UNIV OF NEBRASKA - LINCOLN
Article
Facile Synthesis of Biocompatible Fluorescent Nanoparticles for Cellular Imaging and Targeted Detection of Cancer Cells Fu Tang, Chun Wang, Xiaoyu Wang, and Lidong Li ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.5b08907 • Publication Date (Web): 02 Nov 2015 Downloaded from http://pubs.acs.org on November 3, 2015
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
Facile Synthesis of Biocompatible Fluorescent Nanoparticles for Cellular Imaging and Targeted Detection of Cancer Cells Fu Tang, # Chun Wang, # Xiaoyu Wang, and Lidong Li* School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, P. R. China
ABSTRACT: In this work, we report the facile synthesis of functional core-shell structured nanoparticles with fluorescence enhancement, which show specific targeting of cancer cells. Biopolymer poly-L-lysine was used to coat the silver core with various shell thicknesses. Then the nanoparticles were functionalized with folic acid as a targeting agent for folic acid receptor. The metal-enhanced fluorescence effect
was
observed
when
the
fluorophore
(5-(and-6)-carboxyfluorescein-succinimidyl ester) was conjugated to the modified nanoparticle surface. Cellular imaging assay of the nanoparticles in folic acid receptor-positive cancer cells showed their excellent biocompatibility and selectivity. The as-prepared functional nanoparticles demonstrate the efficiency of the metal-enhanced fluorescence effect and provide an alternative approach for the cellular imaging and targeting of cancer cells.
KEYWORDS: fluorescence, polymer, core-shell nanoparticles, fluorescence enhancement, cellular imaging
INTRODUCTION Fluorescence detection is one of the most commonly used analytical methods in the fields of chemistry and biochemistry, exploiting the fluorescent properties of certain molecules or materials. 1-9 The brightness of the fluorophore is of great importance as a high signal-to-noise ratio yields the desirable characteristics of high sensitivity and detectability. However, conventional fluorescent materials usually have a low 1
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 2 of 22
quantum yield and, when used in large quantities, the light emissions from the fluorophores cause self-quenching, restricting their further application.10-12 Functional conjugated polymers and aggregation-induced emission molecule nanoparticles have been fabricated as substitute fluorescent materials because of their improved photostability and brightness. Studies have shown that they are ideal materials for biosensing and imaging13-19, however, their lack of water solubility and biocompatibility limits their application. Some metal nanostructures (such as gold and silver (Ag) nanoparticles) are reported to possess unique spectroscopically favorable properties that can enhance the emissions of fluorophores localized near their surfaces. This phenomenon is defined as metal-enhanced fluorescence (MEF)
20,21
and can be explained by the near-field
interactions of the plasmon. The MEF effect may provide a promising method to address the quenching problems of fluorophores, thus introducing a new way to realize high sensitivity in fluorescence detection. It has been theoretically calculated and experimentally supported that the MEF effect greatly depends on the distance between
the
fluorophore
and
metallic
substrates.
Maximum
fluorescence
enhancement can be achieved when this distance is optimized.22-28 Earlier work about MEF systems have mainly focused on fabricating metal nanostructure films on planar surfaces.29-35 Although obvious fluorescence enhancements have been achieved via the metallic planar substrates, it is imperative to develop MEF colloidal systems so that this unique fluorescence enhancement phenomenon can be applied to biological fields, such as biosensing and bioimaging.36-43 Hybrid nanoparticles with metallic cores have been developed for MEF studies. Silica,38,39 polymers,40,41 proteins,42 as well as DNA43 have been assembled onto metal nanoparticle surfaces to control the distance between the fluorophore and metals; however, few studies have reported efficient MEF in colloidal systems or applied them to biosensing and bioimaging fields. In this work, we reported a facile method to fabricate a core-shell structured fluorescent nanoparticle with efficient fluorescence enhancement effect and specific targeting ability. To prepare this nanoparticle, Ag nanoparticles coated with 2
ACS Paragon Plus Environment
Page 3 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
biocompatible poly-L-lysine (PLL) shells were synthesized. Folic acid (FA) was then conjugated to the as-prepared Ag@PLL nanoparticle surfaces through a reaction between the carboxyl groups of FA and the amino groups of PLL chain. Meanwhile, 5-(and-6)-carboxyfluorescein-succinimidyl ester (FAM-SE) was chosen as the dye molecule to further modify the PLL shell surface, resulting in the formation of Ag@PLL/(FA/FAM-SE) fluorescent nanoparticles. An increase in the fluorescence intensity of FAM-SE was observed because of the MEF effect from the silver core, after optimizing the PLL shell thickness. Folic acid (FA) can bind with the folic acid receptor (FR) with high affinity, meaning that the FA-modified nanoparticles, Ag@PLL/(FA/FAM-SE), could be useful for the detection of FR-positive cancer cells. A cell imaging assay demonstrated that the as-prepared nanoparticles could target and be taken up by cancerous cells, such as KB cells, the surface of which are rich with FRs. Very few modified nanoparticles were observed in FR-negative MCF 7 cells, which were used as the control. Furthermore, Ag@PLL/(FA/FAM-SE) possess good
biocompatibility
as
demonstrated
by
a
cell
viability
assay.
Ag@PLL/(FA/FAM-SE) provides a new approach to realize the efficiency of the MEF effect and for its application in biological fields, such as cellular imaging and targeting of cancer cells.
EXPERIMENTAL SECTION Materials and Measurements. Silver nitrate, di-tert-butyldicarbonate (Boc2O), N-hydroxysuccinimide
(NHS),
1-[3-(dimethylamino)propyl]-3-ethylcarbodiimide
hydrochloride (EDC), folic acid (FA), trifluoroacetic acid (TFA), and Poly(L-lysine) (PLL)
were
purchased
from
Sigma-Aldrich.
3,3’-Dithiobis(sulfosuccinimidylpropionate) (DTSSP) was purchased from 3B Scientific Corporation (USA). 5-(and-6)-Carboxyfluorescein-succinimidyl ester (FAM-SE) was purchased from Life Technologies Co. Other reagents used in the experiments were purchased from Sigma-Aldrich, and were used without further purification, unless otherwise noted. Distilled water was used throughout. The breast carcinoma (MCF 7) and human nasopharyngeal epidermal carcinoma (KB) cells were 3
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
purchased from the Cell Culture Center of Institute of Basic Medical Sciences, Chinese Academy of Medical Sciences (Beijing, China). Ultraviolet-visible (UV-Vis) absorption spectra were collected on a Hitachi U-3900H spectrophotometer. Fluorescence spectra were obtained using a Hitachi F-7000 fluorescence spectrometer equipped with a Xenon lamp excitation source. Transmission electron microscope (TEM) images were recorded with Hitachi H-7650B. The fluorescence images of the prepared nanoparticles and the cells were recorded using a confocal laser scanning biological microscope (CLSM; Olympus FV1000-IX81). Cell viability was detected using a Spectra MAX 340PC plate reader. Fluorescence lifetime measurements were performed using an Edinburgh Instruments FLS980 spectrometer with excitation wavelength of 470 nm. The ζ-potential and size distributions of the nanoparticles were measured by dynamic light scattering (DLS) with a Malvern Zetasizer Nano ZS90 at room temperature. And nanoparticles were dispersed in distilled water during these measurements. Synthesis of Ag@PLL Nanoparticles with Different Shell Thicknesses. The Ag@PLL nanoparticles with different shell thicknesses were synthesized in three steps. Briefly, Ag nanoparticles were first synthesized by adding 10 mL of freshly prepared 1% [Ag(NH3)2]NO3 to 10 mL of 2% tannic acid solution, at room temperature, with vigorous stirring. After 30 min, the resulting Ag colloids were collected, purified by centrifugation, and re-dispersed in 20 mL of distilled water. Then, 100 µL of the as-prepared Ag nanoparticles were added into 4 mL of cystamine dihydrochloride solution (0.25 mg/mL) under vigorous stirring. And the reaction was kept under stirring at room temperature for 5 h. Subsequently, the amino-modified Ag nanoparticles were washed and purified three times by centrifugation at 8600 ×g for 20 min, and re-dispersed in 1 mL of distilled water. Finally, the amino-modified Ag nanoparticles (1 mL) were added dropwise into 4 mL of PLL solution under gentle stirring, followed by the quick addition of the DTSSP solution (500 µL, 2.5 mg/mL). The pH value of the whole solution was adjusted to 9–10 with NaOH (1M) to facilitate the reaction, and the mixture was then stirred at room temperature for 12 h. The differing shell thicknesses were obtained by 4
ACS Paragon Plus Environment
Page 4 of 22
Page 5 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
varying the concentration of PLL solution from 2.5 mg/mL to 10 mg/mL, respectively. The as-prepared nanoparticles were separated from the reaction mixture by centrifugation at 8600 ×g for 20 min, and re-dispersed in 4 mL of distilled water. Synthesis of Folic Acid-Conjugated Nanoparticles (Ag@PLL/FA). To conjugate FA onto the Ag@PLL nanoparticle surfaces, Boc-protection of FA was first completed by adding 100 µL of Boc2O (20 mM) into a stirred solution of FA (1 mL, 2 mM). The reaction mixture was stirred at room temperature for 12 h under darkened conditions and nitrogen atmosphere. Then, 100 µL of EDC solution (0.1 M) were added to the mixture, followed by 100 µL of NHS (0.1 M). After stirring in the dark overnight, the resulting solution was dialysis against deionized water for 12 h to remove the excess reactant. Then 100 µL of it was added to 4 mL of Ag@PLL solution. After reaction for 12 h, the prepared nanoparticles were collected by centrifugation at 8600 ×g for 20 min, and re-dispersed in 4 mL of PBS buffer (pH 7.4). Synthesis of MEF Nanoparticles (Ag@PLL/(FA/FAM-SE)). To fabricate the Ag@PLL/(FA/FAM-SE) nanoparticles, 10 µL of 0.5 mM FAM-SE were added to 1 mL of the prepared Ag@PLL/FA nanoparticles PBS solution under vigorous stirring. Ag@PLL/(FA/FAM-SE) nanoparticles were obtained after 2 h of incubation. The nanoparticles were washed and centrifuged with PBS buffer (pH 7.4). Then, 6 µL of TFA was added and the mixture was stirred for 2 h. After the reaction, the nanoparticles were washed, centrifuged, and re-dispersed in 100 µL of PBS buffer (pH 7.4). The final concentration of Ag nanoparticles was about 0.8 mg/mL, while that of FA and FAM-SE on Ag@PLL/(FA/FAM-SE) nanoparticles was about 0.11 mM and 8.3 µM respectively, after monitoring the absorption of the combined supernatant liquid. MEF Measurements. To study the MEF effect, 10 µL of Ag@PLL/(FA/FAM-SE) PBS solution was added into 1 mL of PBS buffer (pH 7.4), and the fluorescence emissions were measured under excitation of 470 nm. For comparison, FAM-SE molecules in PBS buffer with or without the presence of Ag nanoparticles were also used as the control. The FAM-SE concentration was fixed at 8.3 × 10-8 M Cell Culture and Cellular Imaging Assay. Breast carcinoma (MCF 7) cells that 5
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
lack folic acid receptors were incubated in a 10% fetal bovine serum (FBS) containing Dulbecco’s modified eagle medium. KB cells, a variation of cancer cell that originates from nasopharyngeal cancer and is known to over-express folic acid receptors, were incubated in FA-deficient RPMI-1640 culture medium, containing 10% FBS.44-46 For cell imaging observation, 1 mL (100,000 cells/mL) of the two types of cell lines were seeded in separate confocal dishes, and incubated at 37 °C in a 5% CO2 humidified atmosphere for 24 h. Then, 100 µL of Ag@PLL/(FA/FAM-SE) nanoparticles were added to 900 µL of the medium containing each type of cell line. After incubation at 37 °C for 4 h, the medium was removed and the cells were washed with PBS three times. Each dish was observed with a confocal laser scanning microscopy (FV1200-IX83, Olympus, Japan) upon 488 nm excitation. Cytotoxicity Assay. The cytotoxicity of the Ag@PLL/(FA/FAM-SE) nanoparticles was
evaluated
using
the
3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium
bromide (MTT) method. MCF 7 and KB cells were seeded in 96-well tissue culture plates and maintained for 24 h in medium containing FBS. They were then treated with various concentrations of Ag@PLL/(FA/FAM-SE) nanoparticles and incubated for 12 h. After, 100 µL MTT, 1 mg/mL in PBS, was added to each well, after the medium was removed, and the cells were incubated at 37 °C for another 4 h. Then the MTT solution was removed and 100 µL of dimethyl sulfoxide were added. The plate was gently agitated for 5 min, and the absorbance of purple formazan at 570 nm was then detected using a Spectra MAX 340PC plate reader.
RESULTS AND DISCUSSION Synthesis and Characterization of Fluorescent Hybrid Biocompatible Nanoparticles. Silver nanoparticles were first synthesized via a tannic acid reduction method.47 The maximum surface plasmon absorption of the as-prepared Ag nanoparticles was at 417 nm (shown in Figure 1a, black line). The Ag nanoparticle surfaces were then modified with large amounts of amino groups through the strong affinity between Ag and the disulfide groups of cystamine. The shell was prepared by cross-linking of PLL molecules with a water-soluble cross-linker, DTSSP, which 6
ACS Paragon Plus Environment
Page 6 of 22
Page 7 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
possesses two activated N-hydroxysulfosuccinimide esters that can react with the primary amine groups of PLL molecular chains. Amino groups on the Ag nanoparticle surfaces facilitated the PLL shell coating via amino group linkage. UV-Vis absorbance spectra (Figure 1a) show a 10-nm red shift of the surface plasmon absorbance of Ag nanoparticles after the PLL shell coating (the red line), which can be attributed to the increase of the refractive index around the Ag nanoparticles after the shell coating. This verified the successful modification with the PLL shell.48 To apply these synthesized nanoparticles to targeted tumor cells, we conjugated FA to the nanoparticle surface. FA is an essential precursor in the synthesis of nucleic acids and some amino acids, but it cannot be produced endogenously by mammalian cells. The internalization of FA by cells is usually achieved via receptor-mediated endocytosis. The FR binds FA with high affinity, and it is known to be over-expressed in many tumors, including malignancies of the breast, ovary, lung, kidney, and brain. The density of FRs also appears to increase as the grade of the cancer increases.45,49 As such, the FR-based mechanism can be exploited to target tumor cells. The conjugation of FA with the synthesized nanoparticles was based on the binding of carboxyl groups on FA molecules and amino groups on the PLL shell surfaces following the usual NHS/EDC reaction. As FA has both carboxyl and amino groups, Boc2O was chosen to protect the amino groups before the carboxyl group activation process so as to avoid self-conjugation of FA molecules. The Boc was later removed by TFA reaction.50 After the FA conjugation, we monitored absorption spectrum of the as-prepared Ag@PLL/FA nanoparticles (Figure 1, blue line). By comparison with the absorption spectrum of Ag@PLL, we can see that the FA conjugation has little effect on the plasmon absorption band of the nanoparticles. This may be explained by the small size and low molecular weight of FA molecules that are unable to change the refractive index around the Ag nanoparticles more obviously.
7
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Figure 1. UV-Vis absorption spectra of Ag nanoparticles (black line), Ag@PLL nanoparticles (red line), Ag@PLL/FA nanoparticles (blue line), Ag@PLL/(FA/FAM-SE) nanoparticles (orange line), and free FAM-SE molecules (green dash).
As PLL is a relatively big molecule, and there are plenty of reactive primary amines on its molecular chain, we chose an amine-reactive molecule, FAM-SE, as the fluorophore to study the MEF effect of the prepared nanoparticles. The FAM-SE contains N-hydroxysulfosuccinimide ester group at the end of the molecular chain that can covalently bond with amine groups on the PLL shell surface. This bonding can efficiently reduce the leakage of dye molecules. Moreover, it was reported that the MEF effect is highly dependent on the spectral overlap between the surface plasmon peaks of the Ag nanoparticles and the absorption of fluorophores,51 another reason for the selection of FAM-SE. The absorption spectra of Ag nanoparticles (black line) and FAM-SE (the green dash line) in Figure 1 shows that the absorption of FAM-SE overlaps well with the surface plasmon absorption of Ag nanoparticles. The orange line in Figure 1 presents the plasmon absorption spectrum of the as-prepared Ag@PLL/(FA/FAM-SE) nanoparticles. It can be seen that the absorption spectrum of Ag@PLL/(FA/FAM-SE) was a superposition of the absorption spectrum of Ag@PLL/FA nanoparticles and the free FAM-SE solution. The final concentration of FAM-SE on Ag@PLL/(FA/FAM-SE) nanoparticles was about 8.3 µM after monitoring the absorption of the combined supernatant liquid. 8
ACS Paragon Plus Environment
Page 8 of 22
Page 9 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
To further prove the successful synthesis of Ag@PLL/(FA/FAM-SE) nanoparticles, we monitored the synthesis process via DLS measurements. The results (Figure S1a in the Supporting Information) showed an average number mean hydrodynamic diameter of about 35.11 nm for Ag nanoparticles, with a polydispersity index (PDI) of 0.33. After the PLL shell coating procedure, the average diameter of the nanoparticles increased to about 55.27 nm, suggesting a shell with thickness of about 10 nm had been successfully synthesized onto the Ag nanoparticles. Meanwhile, the PDI decrease to about 0.27, indicating the improvement of nanoparticles dispersity after a polymer shell coating. Further conjugation of FA and FAM-SE onto Ag@PLL nanoparticles showed little influence on the nanoparticle diameter and PDI. This may be due to the small molecular weight and size of FA and FAM-SE molecules. However, the change in ζ-potential of nanoparticles could be clearly observed after monitoring the surface charge during the nanoparticle modification process. As we can see from Figure S1b, the initial ζ-potential of Ag nanoparticles was about -28.5 mV as tannic acid was used as its surfactant. After the PLL shell coating, the ζ-potential showed a great charge reverse to about +54.2 mV, which could be attributed to the protonated amines on the PLL chains that made the nanoparticle surfaces full of positive charge. Conjugation of FA onto Ag@PLL nanoparticle surfaces decreased the ζ-potential to about +35.9 mV for the consuming of amino groups. And similar phenomenon was observed for further conjugation of FAM-SE, as the final ζ-potential of Ag@PLL/(FA/FAM-SE) nanoparticles was about +17.1 mV. These results demonstrated the successful preparation of Ag@PLL/(FA/FAM-SE) nanoparticles. We
have
also
studied
the
morphology
of
the
prepared
Ag
and
Ag@PLL(FA/FAM-SE) nanoparticles with TEM observation. Figure 2a presents the TEM image of the prepared Ag nanoparticles, with an average size of about 30 nm, and nearly spherically shaped. When compared with the TEM image of Ag@PLL(FA/FAM-SE) nanoparticles present in Figure 2b, an obvious core-shell structure can be observed for all the nanoparticles. We can see clearly that the Ag cores (dark contrast) were fully encapsulated by a uniform PLL(FA/FAM-SE) shell 9
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
(light contrast), and with a shell thickness of about 8 nm, similar to our DLS observation. To further demonstrate the successful conjugation of FAM-SE molecules with the PLL shell, we observed the Ag@PLL/(FA/FAM-SE) nanoparticles by confocal laser scanning microscopy (CLSM). Ag@PLL/(FA/FAM-SE) nanoparticle solution was dropped on a coverslip, and the sample was observed by CLSM under the excitation of 488 nm. Bright green fluorescent faculae could be clearly seen in the CLSM image of Ag@PLL/(FA/FAM-SE) shown in Figure 2c. The well-dispersed state of green faculae demonstrated that the fluorescence was from the FAM-SE assembled on Ag@PLL/FA nanoparticles, not from that of free FAM-SE molecules in solution. This result indicated the successful conjugation of FAM-SE molecules with nanoparticles.
Figure 2. TEM images of (a) Ag nanoparticles and (b) Ag@PLL/(FA/FAM-SE) nanoparticles; (c) confocal laser scanning microscopy images of Ag@PLL/(FA/FAM-SE) nanoparticles.
MEF Effect Assay. As MEF is a distance-dependent effect, we coated the Ag core with PLL shell to serve as a spacer layer between Ag and the fluorophore FAM-SE. Then, the MEF effect was studied by a fluorescence spectrometer with an excitation wavelength of 470 nm. For comparison, FAM-SE molecules in PBS buffer with or without the presence of Ag nanoparticles were also used for the fluorescence assay. The FAM-SE concentration was fixed at 8.3 × 10-8 M in all experimental solutions. From the fluorescence spectrum shown in Figure 3 we can see that, for the Ag/FAM-SE solution (red line), in which FAM-SE directly interacted with Ag nanoparticles, the fluorescence intensity of FAM-SE was quenched to about 35% of its original value. The fluorescence quenching effect could be attributed to the 10
ACS Paragon Plus Environment
Page 10 of 22
Page 11 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
resonant energy transfer from the fluorophore to the metal.23,52 However, when a PLL shell spacer was used to separate the fluorophore and metal, that is, the Ag@PLL(FA/FAM-SE) nanoparticle (blue line), an increase of the fluorescence intensity of FAM-SE was observed when compared with the free state of FAM-SE in solution.
Figure 3. Fluorescence intensity spectra of Ag@PLL/(FA/FAM-SE) dispersion (blue line), free FAM-SE solution (green line), and Ag/FAM-SE dispersion (red line) in PBS buffer (pH 7.4). The concentration of FAM-SE was maintained at 8.3 × 10-8 M.
The distance-dependent fluorescence enhancement of FAM-SE by Ag nanoparticles was further studied by varying the fluorophore-metal distance via controlling the PLL shell thicknesses by changing the PLL concentration from 2.5 mg/mL to 10 mg/mL during the shell formation process. The corresponding PLL shell thicknesses varied from about 3 nm to 13 nm, as calculated by the TEM observations (Figure S2 in the Supporting Information). After monitoring their fluorescence spectra, we found that, with the increase of the shell thicknesses, i.e., the increase of fluorophore-metal distances, the fluorescence intensity of FAM-SE was found to be enhanced, in contrast to fluorescence quenching when the fluorophore and the metal core are in direct contact (Figure S2 in the Supporting Information). An optimal fluorescence enhancement of about 2.1-fold occurred at a fluorophore-metal distance of about 8 nm. Further increase of the fluorophore-metal distance caused a decrease in the enhancement factor. The nanoparticles with PLL shell thickness of 8 nm was then 11
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 12 of 22
chosen to perform our next experiment studies. The MEF effect was reported to be distance dependent and achieved mainly by two mechanisms.21 The first is the amplification of electric fields, which provides stronger excitation rates without modifying the fluorescence lifetime; The second mechanism is the increase of radiative decay rate of fluorophores caused by surface plasmon coupling which changes the lifetime of the fluorophores.
38, 39, 53
To demonstrate the
mechanism of the fluorescence enhancement in our nanoparticle system, we studied the fluorescence lifetime of FAM-SE and Ag@PLL/(FA/FAM-SE) nanoparticles. It can be clearly seen from Figure 4 that the intensity decay of FAM-SE on the Ag@PLL/(FA/FAM-SE) nanoparticles was much faster than that of FAM-SE molecules in their solution state. The calculated average lifetime of FAM-SE in its solution state was about 3.87 ns, while that of Ag@PLL/(FA/FAM-SE) nanoparticles reduced to about 1.28 ns, suggesting the fluorescence enhancement in our prepared system derived from the increased radiation decay affected by the Ag nanoparticles.
Figure 4. Fluorescence lifetime measurements of FAM-SE in its solution state and on the Ag@PLL/(FA/FAM-SE) nanoparticles. The instrument response function (IRF) is also included.
Cell Imaging and Cytotoxicity Assay. The effect of FA modification on the cellular uptake of nanoparticle was studied in the cancer cell lines MCF 7 and KB. KB cells were chosen because of their predisposition to over-expressing FR. In contrast, MCF 7 breast carcinoma cells that lack FR were chosen for the control experiment.44-46 From Figure 5, the CLSM images of MCF 7 and KB cells incubated 12
ACS Paragon Plus Environment
Page 13 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
with Ag@PLL/(FA/FAM-SE) nanoparticles for 4 h at 37 °C, we can see that green fluorescence was observed within both cell types, while nearly no fluorescence signal can be detected from the CLSM images for cells incubated without nanoparticles (Figure S3 in the Supporting Information), indicating the internalization of Ag@PLL/(FA/FAM-SE) nanoparticles. However, the green fluorescence observed from the fluorescence image of MCF 7 cells was extremely weak as cellular uptake was low. In sharp contrast, many more nanoparticles were internalized by FR over-expressed KB cells, evident from the much brighter green fluorescence that could be observed. And when we chose the nanoparticles with unfavorable shell thickness as control experiment (Figure S4 in the Supporting Information), the little weaker fluorescence observed from its fluorescence image demonstrate the efficient MEF effect in cells as shown in Figure 5. This result is consistent with our previous expectations.
Figure 5. CLSM images of MCF 7 cancer cells (the top row) and KB cells (the bottom row) at the presence of Ag@PLL/(FA/FAM-SE) nanoparticles ([FAM-SE]= 8.3 × 10-7 M). Left: phase contrast bright-field images. Middle: fluorescence images. Right: the over-lapped images of bright-field and fluorescence images. The fluorescence images were obtained using a 488-nm laser. The scale bar represents 20 µm.
For the prepared fluorescent nanoparticles to be applied as targeting vehicles, it is 13
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 14 of 22
important that the nanoparticles possess low cytotoxicity. By comparing the bright field images of cells in Figure 5 and Figure S3, we can see that co-incubation with Ag@PLL/(FA/FAM-SE) nanoparticles affected the morphology of MCF 7 and KB cells little. Then we incubated the prepared Ag@PLL/(FA/FAM-SE) nanoparticles with both KB cells and MCF 7 cells and investigated the cell viability with various nanoparticle
concentrations
via
the
MTT
method.
The
amount
of
Ag@PLL/(FA/FAM-SE) nanoparticles used was expressed as the concentration of conjugated FAM-SE molecules. The absorbance of MTT at 570 nm is dependent on the degree of activation of the cells. The cell viability can then be calculated via the ratio of absorbance of the cells incubated with Ag@PLL/(FA/FAM-SE) nanoparticles to that of the cells incubated with culture medium only. As shown in Figure 6, the cell viability of both cell lines are still as high as about 90% when incubated with Ag@PLL/(FA/FAM-SE) nanoparticles at the concentration that was used in the cellular imaging assay (the final concentration of FAM-SE was 8.3 × 10-7 M). When the concentration of FAM-SE is as high as 1.66 µM, both cell lines have a viability of more than 80%. Those results indicated the good biocompatibility of the prepared Ag@PLL/(FA/FAM-SE) nanoparticles.
Figure 6. Cell viability results after incubation of MCF 7 and KB cells with different concentrations of Ag@PLL/(FA/FAM-SE) nanoparticles using MTT assay. Error bars correspond to standard deviations from three separate measurements. The amounts of nanoparticles were expressed as the concentrations of conjugated FAM-SE molecules. 14
ACS Paragon Plus Environment
Page 15 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
CONCLUSION In this work, we fabricated core-shell structured fluorescent nanoparticles, with a fluorescence enhancement effect and additional specific cancer cell targeting ability. A biocompatible shell was developed to coat silver nanoparticles and served as a spacer layer to separate fluorophore (FAM-SE) from the metal core. By varying shell thickness, the fluorophore-metal distance could be controlled and optimized. FAM-SE was conjugated onto the surface of Ag@PLL nanoparticle via the formation of covalent bond with the PLL chain. The fluorescence of FAM-SE was enhanced by about 2.1-fold because of the MEF effect of the silver core after its conjugation. By bonding folic acid on the nanoparticle surfaces, the as-prepared fluorescent nanoparticles show obvious specific internalization of FR-positive KB cells over FR-negative MCF 7 cells. Cell viability assays demonstrate the low cytotoxicity of these nanoparticles. By using the MEF effect, the as-prepared fluorescent nanoparticles show promise for application in cellular imaging and target sensing of cancer cells.
AUTHOR INFORMATION Corresponding Author *E-mail:
[email protected] (L.L.) Author Contributions #
F. T. and C.W. contributed equally to this study.
Notes The authors declare no competing financial interest.
ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China (51403018, 51373022), the Fundamental Research Funds for the Central Universities 15
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 16 of 22
(FRF-TP-15-002A2). The authors thank Dr. Libin Liu for giving support for the cellular experiments.
ASSOCIATED CONTENT Supporting Information. Size,
polydispersity
and
ζ-potential of
Ag,
Ag@PLL,
Ag@PLL/FA and
Ag@PLL/(FA/FAM-SE) nanoparticles in solution. Fluorescence enhancement factor of Ag@PLL/(FA/FAM-SE) nanoparticles with different shell thickness. CLSM images of MCF 7 cancer cells and KB cells incubated with cell culture medium only and with Ag@PLL/(FA/FAM-SE) nanoparticles, the shell thickness was about 13 nm.
REFERENCES (1) He, Y.; Su, Y.; Yang, X.; Kang, Z.; Xu, T.; Zhang, R.; Fan, C.; Lee, S.-T. Photo and pH Stable, Highly-Luminescent Silicon Nanospheres and Their Bioconjugates for Immunofluorescent Cell Imaging. J. Am. Chem. Soc. 2009, 131, 4434–4438. (2) Song, S.; Qin, Y.; He, Y.; Huang, Q.; Fan, C.; Chen, H.-Y. Functional Nanoprobes for Ultrasensitive Detection of Biomolecules. Chem. Soc. Rev. 2010, 39, 4234–4243. (3) Wang, H.; He, F.; Yan, R.; Wang, X.; Zhu, X.; Li, L. Citrate-Induced Aggregation of Conjugated Polyelectrolytes for Al3+-Ion-Sensing Assays. ACS Appl. Mater. Interfaces 2013, 5, 8254–8259. (4) Wang, J.; Xu, X.; Shi, L.; Li, L. Fluorescent Organic Nanoparticles Based on Branched Small Molecule: Preparation and Ion Detection in Lithium-Ion Battery. ACS Appl. Mater. Interfaces 2013, 5, 3392–3400. (5) Pinto, M. R.; Schanze, K. S. Amplified Fluorescence Sensing of Protease Activity with Conjugated Polyelectrolytes. Proc. Natl. Acad. Sci. USA 2004, 101, 7505–7510.
16
ACS Paragon Plus Environment
Page 17 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
(6) Zhao, X.; Schanze, K. S. Fluorescent Ratiometric Sensing of Pyrophosphate via Induced Aggregation of A Conjugated Polyelectrolyte. Chem. Commun. 2010, 46, 6075–6077. (7) Whitten, D. G.; Achyuthan, K. E.; Lopez, G. P.; Kim, O.-K. Cooperative Self-Assembly of Cyanines on Carboxymethylamylose and Other Anionic Scaffolds as Tools for Fluorescence-Based Biochemical Sensing. Pure Appl. Chem. 2006, 78, 2313–2323. (8) Yang, Q.; Dong, Y.; Wu, W.; Zhu, C.; Chong, H.; Lu, J.; Yu, D.; Liu, L.; Lv, F.; Wang, S. Detection and Differential Diagnosis of Colon Cancer by A Cumulative Analysis of Promoter Methylation. Nat. Commun. 2012, 3, 1206. (9) Feng, L.; Liu, L.; Lv, F.; Bazan, G. C.; Wang, S. Preparation and Biofunctionalization of Multicolor Conjugated Polymer Nanoparticles for Imaging and Detection of Tumor Cells. Adv. Mater. 2014, 26, 3926–3930. (10) Li, K.; Liu, B. Polymer-Encapsulated Organic Nanoparticles for Fluorescence and Photoacoustic Imaging. Chem. Soc. Rev. 2014, 43, 6570–6597. (11) Duan, X.; Liu, L.; Feng, F.; Wang, S. Cationic Conjugated Polymers for Optical Detection of DNA Methylation, Lesions, and Single Nucleotide Polymorphisms. Acc. Chem. Res. 2010, 43, 260–270. (12) Feng, L.; Zhu, C.; Yuan, H.; Liu, L.; Lv, F.; Wang, S. Conjugated Polymer Nanoparticles:
Preparation,
Properties,
Functionalization
and
Biological
Applications. Chem. Soc. Rev. 2013, 42, 6620–6633. (13) Jiang, H.; Taranekar, P.; Reynolds, J. R.; Schanze, K. S. Conjugated Polyelectrolytes: Synthesis, Photophysics, and Applications. Angew. Chem. Int. Ed. 2009, 48, 4300–4316. (14) Parthasarathy, A.; Ahn, H.-Y.; Belfield, K. D.; Schanze, K. S. Two-Photon Excited Fluorescence of A Conjugated Polyelectrolyte and Its Application in Cell Imaging. ACS Appl. Mater. Interfaces 2010, 2, 2744–2748. (15) Nie, C.; Zhu, C.; Feng, L.; Lv, F.; Liu, L.; Wang, S. Synthesis of a New Conjugated Polymer for DNA Alkylation and Gene Regulation. ACS Appl. Mater. Interfaces 2013, 5, 4549–4554. 17
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 18 of 22
(16) Li, S.; Shen, X.; Li, L.; Yuan, P.; Guan, Z.; Yao, S. Q.; Xu, Q.-H. Conjugated-Polymer-Based
Red-Emitting
Nanoparticles
for
Two-Photon
Excitation Cell Imaging with High Contrast. Langmuir 2014, 30, 7623–7627. (17) Tang, F.; Wang, C.; Wang, J.; Wang, X.; Li, L. Fluorescent Organic Nanoparticles with Enhanced Fluorescence by Self-Aggregation and their Application to Cellular Imaging. ACS Appl. Mater. Interfaces 2014, 6, 18337–18343. (18) Wang, X.; Hu, J.; Zhang, G.; Liu, S. Highly Selective Fluorogenic Multianalyte Biosensors
Constructed
via
Enzyme-Catalyzed
Coupling
and
Aggregation-Induced Emission. J. Am. Chem. Soc. 2014, 136, 9890–9893. (19) Wang, K.; Zhang, X.; Zhang, X.; Yang, B.; Li, Z.; Zhang, Q.; Huang, Z.; Wei, Y. Red
Fluorescent
Cross-Linked
Glycopolymer
Nanoparticles
Based
on
Aggregation Induced Emission Dyes for Cell Imaging. Polym. Chem. 2015, 6, 1360–1366. (20) Lakowicz, J. R. Plasmonics in Biology and Plasmon-Controlled Fluorescence. Plasmonics 2006, 1, 5–33. (21) Cui, Q.; He, F.; Li, L.; Möhwald, H. Controllable Metal-Enhanced Fluorescence in Organized Films and Colloidal System. Adv. Colloid Interface Sci. 2014, 207, 164–177. (22) Zhang, Y.; Aslan, K.; Previte, M. J. R.; Geddes, C. D. Metal-Enhanced Fluorescence: Surface Plasmons can Radiate a Fluorophore’s Structured Emission. Appl. Phys. Lett. 2007, 90, 053107. (23) Lakowicz, J. R. Radiative Decay Engineering: Biophysical and Biomedical Applications. Anal. Biochem. 2001, 298, 1–24. (24) Cheng, Y.; Stakenborg, T.; Dorpe, P. V.; Lagae, L.; Wang, M.; Chen, H.; Borghs, G. Fluorescence Near Gold Nanoparticles for DNA Sensing. Anal. Chem. 2011, 83, 1307–1314. (25) Tang, F.; Ma, N.; Tong, L.; He, F.; Li, L. Control of Metal-Enhanced Fluorescence with pH- and Thermoresponsive Hybrid Microgels. Langmuir, 2012, 28, 883–888. 18
ACS Paragon Plus Environment
Page 19 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
(26) Zhang, J.; Ma, N.; Tang, F.; Cui, Q.; He, F.; Li, L. pH- and Gluocose-Responsive Core-Shell Hybrid Nanoparticles with Controllable Metal-Enhanced Fluorescence Effects. ACS Appl. Mater. Interfaces 2012, 4, 1747–1751. (27) Wang,
X.;
He,
F.;
Zhu,
X.;
Tang,
F.;
Li,
L.
Hybrid
Silver
Nanoparticle/Conjugated Polyelectrolyte Nanocomposites Exhibiting Controllable Metal-Enhanced Fluorescence. Sci. Rep. 2014, 4, 4406. (28) Ray, K.; Badugu, R.; Lakowicz, J. R. Polyelectrolyte layer-by-layer assembly to control the distance between fluorophores and plasmonic nanostructures. Chem. Mater. 2007, 19, 5902–5909. (29) Touahir, L.; Galopin, E.; Boukherroub, R.; Gouget-Laemmel, A. C.; Chazalviel, J.-N.; Ozanam, F.; Szunerits, S. Localized Surface Plasmon-Enhanced Fluorescence Spectroscopy for Highly-Sensitive Real-Time Detection of DNA Hybridization. Biosens. Bioelectron. 2010, 25, 2579–2585. (30) Hong, G.; Tabakman, S. M.; Welsher, K.; Wang, H.; Wang, X.; Dai, H. Metal-Enhanced Fluorescence of Carbon Nanotubes. J. Am. Chem. Soc. 2010, 132, 15920–15923. (31) Ma, N.; Tang, F.; Wang, X.; He, F.; Li, L. Tunable Metal-Enhanced Fluorescence by Stimuli-Responsive Polyelectrolyte Interlayer Films. Macromol. Rapid Commun. 2011, 32, 587–592. (32) Tong, L.; Ma, N.; Tang, F.; Qiu, D.; Cui, Q.; Li, L. pH and Thermoresponsive Ag/polyelectrolyte Hybrid Thin Films for Tunable Metal-Enhanced Fluorescence. J. Mater. Chem. 2012, 22, 8988–8993. (33) Dong, J.; Zheng, H. Self-Assembled Synthesis of SEF-Active Silver Dendrites by Galvanic Displacement on Copper Substrate. Appl. Phys. B 2013, 111, 523–526. (34) Zhu, X.; Wang, X.; He, F.; Tang, F.; Li, L. Self-Assembled Nanocomposite Film with Tunable Enhanced Fluorescence for the Detection of DNA. ACS Appl. Mater. Interfaces 2015, 7, 1334–1339. (35) Abel, B.; Coskun, S.; Mohammed, M.; Williams, R.; Unalan, H. E.; Aslan, K. Metal-Enhanced Fluorescence from Silver Nanowires with High Aspect Ratio on Glass Slides for Biosensing Applications. J. Phys. Chem. C 2015, 119, 675–684. 19
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 20 of 22
(36) Gill, R.; Tian, L.; Somerville, W. R. C.; Ru, E. C. L.; Amerongen, H.; Subramaniam, V. Silver Nanoparticle Aggregates as Highly Efficient Plasmonic Antennas for Fluorescence Enhancement. J. Phys. Chem. C 2012, 116, 16687–16693. (37) Liu, Y.; Wu, P. Meditating Metal Coenhanced Fluorescence and SERS Around Gold Nanoaggregates in Nanosphere as Bifunctional Biosensor for Multiple DNA Targets. ACS Appl. Mater. Interfaces 2013, 5, 5832–5844. (38) Cheng, D.; Xu, Q.-H. Separation Distance Dependent Fluorescence Enhancement of Fluorescein Isothiocyanate by Silver Nanoparticles. Chem. Commun. 2007, 248–250. (39) Tang, F.; He, F.; Cheng, H.; Li, L. Self-Assembly of Conjugated Polymer-Ag@SiO2 Hybrid Fluorescent Nanoparticles for Application to Cellular Imaging. Langmuir 2010, 26, 11774–11778. (40) Tang,
F.; Ma, N.; Wang, X.; He, F.; Li, L.
Polymer-Ag@PNIPAM
Fluorescent
Nanoparticles
Hybrid Conjugated
with
Metal-Enhanced
Fluorescence. J. Mater. Chem. 2011, 21, 16943–16948. (41) Cui, Q.; He, F.; Wang, X.; Xia, B.; Li, L. Gold Nanoflower@Gelatin Core-Shell Nanoparticles Loaded with Conjugated Polymer Applied for Cellular Imaging. ACS Appl. Mater. Interfaces 2013, 5, 213–219. (42) Bardhan, R.; Grady, N. K.; Cole, J. R.; Joshi, A.; Halas, N. J. Fluorescence Enhancement by Au Nanostructures: Nanoshells and Nanorods. ACS Nano 2009, 3, 744–752. (43) Dulkeith, E.; Ringler, M.; Klar, T. A.; Feldmann, J. Gold Nanoparticles Quench Fluorescence by Phase Induced Radiative Rate Suppression. Nano Lett. 2005, 5, 585–589. (44) Xing, C.; Liu, L.; Tang, H.; Feng, X.; Yang, Q.; Wang, S.; Bazan, G. C. Design Guidelines For Conjugated Polymers With Light-Activated Anticancer Activity. Adv. Funct. Mater. 2011, 21, 4058–4067. (45) Dixit, V.; Van den Bossche, J.; Sherman, D. M.; Thompson, D. H.; Andres, R. P. Synthesis and Grafting of Thioctic Acid-PEG-Folate Conjugates onto Au 20
ACS Paragon Plus Environment
Page 21 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
Nanoparticles for Selective Targeting of Folate Receptor-Positive Tumor Cells. Bioconjugate Chem. 2006, 17, 603–609. (46) Santra, S.; Kaittanis, C.; Santiesteban, O. J.; Perez, J. M. Cell-Specific, Activatable, and Theranostic Prodrug for Dual-Targeted Cancer Imaging and Therapy. J. Am. Chem. Soc. 2011, 133, 16680–16688. (47) Sivaraman, S. K.; Elango, I.; Kumar, S.; Santhanam, V. A Green Protocol for Room Temperature Synthesis of Silver Nanoparticles in Seconds. Curr. Sci. 2009, 97, 1055–1059. (48) Chen, H.; Ming, T.; Zhao, L.; Wang, F.; Sun, L.-D.; Wang, J.; Yan, C.-H. Plasmon-Molecule Interactions. Nano Today 2010, 5, 494–505. (49) Sun, C.; Sze, R.; Zhang, M. Folic Acid-PEG Conjugated Superparamagnetic Nanoparticles for Targeted Cellular Uptake and Detection by MRI. J. Biomed. Mater. Res., Part A 2006, 78A, 550–557. (50) Mohapatra, S.; Mallick, S. K.; Maiti, T. K.; Ghosh, S. K.; Pramanik, P. Synthesis of Highly Stable Folic Acid Conjugated Magnetite Nanoparticles for Targeting Cancer Cells. Nanotechnology 2007, 18, 385102. (51) Zhang, Y.; Dragan, A.; Geddes, C. D. Wavelength Dependence of Metal-Enhanced Fluorescence. J. Phys. Chem. C 2009, 113, 12095–12100. (52) Aslan, K.; Pérez-Luna, V. H. Quenched Emission of Fluorescence by Ligand Functionalized Gold Nanoparticles. J. Fluoresc. 2004, 14, 401–405. (53) Ray, K.; Badugu, R.; Lakowicz, J. R. Metal-Enhanced Fluorescence from CdTe Nanocrystals: A Single-Molecule Fluorescence Study. J. Am. Chem. Soc. 2006, 128, 8998–8999.
21
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Table of Contents
22
ACS Paragon Plus Environment
Page 22 of 22