Fast-Charging High-Energy Battery–Supercapacitor Hybrid

Aug 21, 2019 - ... materials (particularly for a battery-type anode material) and design for BSHs, ... The Supporting Information is available free of...
0 downloads 0 Views 2MB Size
Subscriber access provided by Stockholm University Library

Article

Fast-Charging High-Energy Battery–Supercapacitor Hybrid: Anodic Reduced Graphene Oxide– Vanadium(IV) Oxide Sheet-on-Sheet Heterostructure Ramkrishna Sahoo, Tae Hoon Lee, Duy Tho Pham, Thi Hoai Thuong Luu, and Young Hee Lee ACS Nano, Just Accepted Manuscript • DOI: 10.1021/acsnano.9b05605 • Publication Date (Web): 21 Aug 2019 Downloaded from pubs.acs.org on August 21, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Nano

Fast-Charging High-Energy Battery–Supercapacitor Hybrid: Anodic Reduced Graphene Oxide–Vanadium(IV) Oxide Sheet-on-Sheet Heterostructure Ramkrishna Sahoo†,‡, Tae Hoon Lee†, Duy Tho Pham†, Thi Hoai Thuong Luu†,₴, Young Hee Lee†,₴* †

Center for Integrated Nanostructure Physics (CINAP), Institute for Basic Science (IBS), Suwon 16419, Republic of Korea. ‡ Centre for Advanced Studies (CAS), Dr. APJ Abdul Kalam Technical University (AKTU), Lucknow, India. ₴ Department of Energy Science, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea. *Corresponding author E-mail address: [email protected] (Y. H. Lee).

1 ACS Paragon Plus Environment

ACS Nano 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ABSTRACT The battery–supercapacitor hybrid (BSH) device has potential applications in energy storage and can be a remedy for low-power batteries and low-energy supercapacitors. Although several studies have investigated on electrode materials (particularly for a battery-type anode material) and design for BSHs, the energy density and power density are insufficient (far from the levels required for practical applications). Herein, a hierarchical vanadium (IV) oxide on reduced graphene oxide (rGO@VO2) heterostructure as an anode and activated carbon on carbon cloth (AC@CC) as a cathode are proposed for fabricating an advanced BSH. The mixed valency of V ions inside the as-prepared VO2 matrix (V3+ and V4+) facilitates redox reactions at a low potential, giving rise to rGO@VO2 as a typical anode with a working potential of 0.01–3 V (vs Li/Li+). The sheet-on-sheet heterostructured rGO@VO2 yields a high specific capacity of 1214 mAh g−1 at 0.1 A g−1 after 120 cycles, with a high rate capability and stability. The rGO@VO2//AC@CC BSH device exhibits a maximum gravimetric energy density of 126.7 Wh kg−1 and a maximum gravimetric power density of ~10000 W kg−1 within a working voltage range of 1–4 V. Moreover, it exhibits fast charging times of 5 and 834 s with energy densities of 15.6 and 82 Wh kg −1, respectively. KEYWORDS: battery–supercapacitor hybrids, rGO@VO2 sheet-on-sheet heterostructure, working potential, energy density, fast charging, self-discharge.

2 ACS Paragon Plus Environment

Page 2 of 34

Page 3 of 34 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Nano

Li-ion batteries (LIBs) dominate the energy-storage market owing to their high energy density (~150 Wh kg−1).1-3 However, intrinsically lethargic solid-state Li-ion diffusion inside the bulk electrode results in a low power density (