Fluorides, Chlorides, Oxides, and Hydroxides for - ACS Publications

Dec 14, 2017 - Published as part of The Journal of Physical Chemistry virtual special issue “W. Lester S. Andrews Festschrift”. Monica Vasiliu,. â...
0 downloads 0 Views 451KB Size
Subscriber access provided by - Access paid by the | UCSB Libraries

Article

Structures and Heats of Formation of Simple Alkaline Earth Metal Compounds II: Fluorides, Chlorides, Oxides, and Hydroxides for Ba, Sr, and Ra Monica Vasiliu, J. Grant Hill, Kirk A. Peterson, and David A Dixon J. Phys. Chem. A, Just Accepted Manuscript • DOI: 10.1021/acs.jpca.7b09056 • Publication Date (Web): 14 Dec 2017 Downloaded from http://pubs.acs.org on December 16, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

The Journal of Physical Chemistry A is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

Structures and Heats of Formation of Simple Alkaline Earth Metal Compounds II: Fluorides, Chlorides, Oxides, and Hydroxides for Ba, Sr, and Ra Monica Vasiliu,1 J. Grant Hill,2 Kirk A. Peterson,3 and David A. Dixon1,*,† 1

Chemistry Department, Shelby Hall, The University of Alabama, Shelby Hall, Box 870336,

Tuscaloosa, AL 35487-0336 2

Department of Chemistry, University of Sheffield, Sheffield S3 7HF, U.K.

3

Department of Chemistry, Washington State University, Pullman, Washington 99164-4630

Abstract Geometry parameters, vibrational frequencies, heats of formation, bond dissociation energies, cohesive energies, and selected fluoride affinities (difluorides) are predicted for the late alkaline earth (Sr, Ba and Ra) oxides, fluorides, chlorides, and hydroxides at the coupled cluster theory [CCSD(T)] level. Additional corrections (scalar relativistic and pseudopotential corrections, vibrational zero-point energies, and atomic spin-orbit effects) were included to accurately calculate the total atomization energies and heats of formation following the FellerPeterson-Dixon methodology. The calculated values are compared to the experimental data where available. In some cases, especially for Ra compounds, there are no experimental results or the experimental energetics and geometries are not reliable or have very large error bars. All of the Sr, Ba and Ra difluorides, dichlorides and dihydroxides are bent structures with the OMO bond angles decreasing going down the group. The cohesive energy of bulk Be dihalides are predicted to be quite low while those of Ra are relatively large. The fluoride affinities show that



Email: [email protected] 1 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

the difluorides are moderately strong Lewis acids and that such trifluorides may form under the appropriate experimental conditions.

2 ACS Paragon Plus Environment

Page 2 of 41

Page 3 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

Introduction Simple alkaline earth compounds play an important role in flame chemistry1,2,3 and in other high temperature regimes such as magnetohydrodynamic (MHD) plasmas 4 and stellar atmospheres. 5 Molecules containing Sr and Ba have also been observed in atmospheric release experiments. 6 Important species include the metal monohydroxides 7 and the oxides. 8 Severe nuclear accidents can release a wide range of species, and BaO and SrO are among those that have been considered in the gas phase from the interaction of the core with concrete. 9 The alkaline earth hydroxides may also play a role. Furthermore, molten salt nuclear reactors may generate various gas phase alkaline earth fluorides or chlorides depending on the anion used in the salt and the nuclear fission products, and thermodynamic information about these materials is needed. 10,11,12,13,14 In addition, one can obtain information about cohesive energies of solid materials by combining the calculated heats of formation of the gaseous species with the experimental heats of formation of the solid. 15,16 Reliable structural, spectroscopic and thermodynamic information about alkali and alkaline earth compounds have previously been predicted using accurate computational chemistry methods 17,18 based on the Feller-Peterson-Dixon (FPD) composite approach. 19,20,21 The FPD approach is based on correlated molecular orbital theory using coupled cluster methods starting at the CCSD(T) level 22,23,24,25 extrapolated to the complete basis set (CBS) limit using the correlation consistent basis sets with additional corrections. 26,27,28,29,30,31 Additional high level calculations for the alkaline earth hydroxides, oxides, fluorides, and chlorides up to Ca have been previously reported. 32,33,34,35,36,37,38,39,40 Martin and co-workers37 emphasized the need to include the core electrons in the correlation calculations. Recently, Neese and co-workers 41 have reported results at the CCSD(T) and DLPNO-CCSD(T) level for SrF2, SrCl2, BaF2, BaCl2,

3 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 41

and BaO. They calculated a range of reaction energetics and compared them to experimental values and also emphasized the need to correlate the outer core electrons. In addition, The recent design of systematically convergent, correlation consistent basis sets for the third, fourth and fifth row main group and transition elements using relativistic effective core potentials 42,43,44,45,46 has been essential to the application of highly accurate correlation methods. With the new basis sets developed by Hill, Peterson, and co-workers 47,48 for M = Sr, Ba and Ra, we can expand our predictions of the thermodynamic properties of the alkaline earth metals. Herein, we report the properties of M = Sr, Ba, and Ra halides (chlorides and fluorides), oxides and hydroxides. Computational Methods We used the coupled-cluster method at the CCSD(T) level including core-valence (CV) correlation corrections with the aug-cc-pVnZ (H)/aug-cc-pwCVnZ (O, F, Cl)/aug-cc-pwCVnZPP (Sr, Ba, Ra) basis sets for n = D, T, Q and 5 (abbreviated as awCVnZ) to predict the structural characteristics and thermodynamic properties of the alkaline earth compounds for M = Sr, Ba, and Ra fluorides, chlorides, oxides and hydroxides.26,27,47,49 The 28 electrons in the 1s2s2p3s3p3d orbitals of Sr, the 46 electrons in the 1s2s2p3s3p3d4s4p4d orbitals of Ba, and the 78 electrons in the 1s through 5d orbitals of Ra are replaced by relativistic energy-consistent pseudopotentials (PPs). 50 Equilibrium geometries were optimized at the CCSD(T)(CV)/awCVnZ level with n = D and T, except for the diatomic compounds which were optimized with n = D, T and Q. The CCSD(T) total energies were extrapolated to the CBS limit by using Eq. 1 51,52 for basis sets with n = 4 and 5 (awCVQZ and awCV5Z) E(n) = ECBS + A/[n + 0.5]4

(1)

4 ACS Paragon Plus Environment

Page 5 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

We label the values obtained from Eq. 1 as CBS-Q5. Alternative extrapolated values using a mixed Gaussian/exponential (Eq. 2) for n=2-4: 53 E(n) = ECBS + B exp[−(n − 1)] + C exp[−(n − 1)2]

(2)

are given in the Supporting Information. The harmonic frequencies (ωe) and anharmonic constants (ωexe) of the diatomic molecules were obtained at the CCSD(T)/awCVQZ level using a 7-point Dunham expansion. 54,55 Harmonic vibrational frequencies for the remaining alkaline earth compounds were calculated at the CCSD(T)/awCVTZ level. The anharmonic corrections 56,57,58 of the closed shell polyatomic molecules

were

calculated

via

2nd-order

vibrational

perturbation

theory

at

the

MP2 59,60/awCVTZ/wCVTZ-PP(Sr,Ba,Ra) level using Gaussian09 (Supporting Information).61 For the MOH compounds, the anharmonic corrections were obtained from analytical fits (polynomials in simple displacement coordinates) to the near-equilibrium potential energy surfaces (defined by 50 symmetry-unique geometries) at the MP2/awCVTZ/wCVTZPP(Sr,Ba,Ra) level using Molpro 62,63 and the Surfit program. 64 The appropriate frequencies were used in the zero point energy (ZPE) corrections to the total atomization energy. Total atomization energies (TAEs or ΣD0) at 0 K were calculated from the following expression (Eq. 3) with ΔE referring to the difference between the molecule (reactant) and the atomic products for each energy component: ΣD0 = ΔECBS + ΔErel + ΔEZPE + ΔESO

(3)

Additional corrections to the CCSD(T)/CBS energy (ΔECBS) are necessary to reach chemical accuracy (±1 kcal/mol). Scalar relativistic corrections for light elements together with corrections for the PP approximation, ΔErel, were obtained using the 2nd or 3rd order Douglas-Kroll-Hess (DKH) Hamiltonian at the CCSD(T)/aug-cc-pwCVTZ-DK48,65 level of theory (abbreviated as

5 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

awCVnZ-DK). The atomic spin-orbit corrections, ΔESO = {ΣJ[(2J + 1)·E(J)]}/[ΣJ(2J + 1)], were calculated from the experimental values for the ground states of the atoms using Moore’s tables 66 (ΔESO(O) = -0.22, ΔESO(F) = -0.39, ΔESO(Cl) = -0.84 kcal/mol and 0 kcal/mol for H, Sr, Ba and Ra). Heats of formation at 0 K were calculated by combining our computed ΣD0 values with the known enthalpies of formation at 0 K for the elements 67 [ΔHf,0K(O) = 58.98 ± 0.02, ΔHf,0K(F) = 18.47 ± 0.07, ΔHf,0K(Cl) = 28.59, ΔHf,0K(H) = 51.63, ΔHf,0K(Sr) = 39.3 ± 0.4, and ΔHf,0K(Ba) = 43.0 ± 1.2 kcal/mol]. Two values for ΔHf,0K(Ra) of 36.35 kcal/mol 68 and 38.95 ± 2.0 kcal/mol 69 have been reported. Since we cannot distinguish which one is better without reliable data for other Ra containing compounds determined independently of this gas phase value, we report results using both atomic heats of formation. Heats of formation at 298 K were calculated by following the procedures outlined by Curtiss et al. 70 The CCSD(T) calculations were performed with the MOLPRO 2012.1 program package.62,63 The open-shell calculations were done with the R/UCCSD(T) approach where a restricted open shell Hartree-Fock (ROHF) calculation was initially performed and the spin constraint was then relaxed in the coupled cluster calculation.24,71,72,73 The calculations were mainly performed on Linux clusters at The University of Alabama. Results and Discussion Geometries The optimized geometries of the diatomic Sr, Ba and Ra compounds are reported in Table 1 and compared to the available experimental values. The M-A bond distances of the diatomics where M = Sr, Ba or Ra and A = O, Cl or F are in good agreement with experiment. 74,75,76,77,78,79,80,81,82,83,84,85 In general, the calculated Sr-O and Ba-O bond distances are longer than experiment by about 0.01 Å suggesting that a similar error is likely for Ra-O,

6 ACS Paragon Plus Environment

Page 6 of 41

Page 7 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

where the experimental data has not been reported. The Ba-O bond is only slightly longer than the SrO bond and there is a much larger difference between RaO and BaO for the bond distance. The monofluorides and monochlorides exhibit a similar difference of 0.01 Å between the CCSD(T) values and experiment for Sr and Ba. The trends in the M-X bond distances are different from the M-O bond distances as there is an approximately equal spacing between the Sr-F, Ba-F and Ra- F bonds and a similar but larger spacing between the M-Cl bonds.

Table 1. CCSD(T) Calculated and Experimental Bond Distances in Å for the Alkaline Earth Metal Oxides, Monochlorides and Monofluorides. Molecule awCVQZ awCV5Z awCVQZ-DKa Expt. 1 + SrO ( Σ ) 1.935 1.929 1.927 1.91980977,78,80, 85 BaO (1Σ+) 1.947 1.943 1.950 1.93963074,75,77, 78,80,81,85 RaO (1Σ+) 2.061 2.052 2.052 2 + SrF ( Σ ) 2.085 2.082 2.082 2.0753784,85 BaF (2Σ+) 2.172 2.168 2.177 2.16377,85 RaF (2Σ+) 2.262 2.256 2.253 2 + SrCl ( Σ ) 2.588 2.584 2.599 2.57680,83,84 BaCl (2Σ+) 2.701 2.694 2.700 2.682765(10) 2 + RaCl ( Σ ) 2.801 2.794 2.802 a Using DKH2 for Sr compounds and DKH3 for Ba and Ra compounds. The O and F 1s, and Cl 2s and 2p orbitals have been rotated into the correlated electron space.

Based partially on the diatomic results above, the current predicted geometries for the triatomic dihalides (Table 2) should be more reliable than the estimated values reported in the JANAF Tables.67 The values in the JANAF Tables are not directly measured for the isolated molecules but are derived from krypton matrix isolation infrared spectroscopy measurements in combination with a normal coordinate/force field analysis. 86,87 We now discuss the periodic trends in the bending angle in the Group 2 dihalides. BeF2 is a linear molecule from both 7 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

experiment and theory.18,88 MgF2 is predicted at the CCSD(T)/awCVTZ level18 to be linear in contrast to some of the experimental data. Krypton matrix isolation infrared spectroscopy measurements have been interpreted to show that the molecule is bent with an ∠FMgF = 158° 89 but electron diffraction 90 and beam deflection measurements 91 suggest a linear structure, consistent with the CCSD(T) one. The low calculated bending frequency of 154 cm-1 suggests that the Kr matrix is causing a bent structure. Hassett and Marsden40 examined the effect of the basis set and correlation level on the bending frequency for linear MgF2 and found modest effects. CaF2 is predicted18 to have a bent structure with ∠FCaF = 157°, consistent with the experimental result that CaF2 has a permanent electric dipole moment.88,92 As found for MgF2, the experimental ∠FCaF angle of 135 ± 7° derived from a Kr matrix isolation experiment is 20° smaller than our calculated value.86 Hassett and Marsden 93 examined the effect of the basis set on the angle for CaF2 at the Hartree-Fock level and found that large d-orbital basis sets are needed to find a bent structure. Kaupp et al. 94 predicted that CaF2 is bent with a bond angle of 157.5º ad the CISD+Q (configuration interaction single and doubles with the Davidson correction) level with a 6s6p5d1f valence basis set with a pseudopotential on the Ca. The trend in the difluorides being bent beginning at CaF2 continues for the heavier Group 2 elements with the bond angle decreasing from Sr to Ra, with a much smaller difference between Ba and Ra than between Sr and Ba. Kaupp et al.94 predict SrF2 and BaF2 to be bent with bond angles of 138.8º and 123.0º at the level given above consistent with our CCSD(T) results. BeCl2, MgCl2, and CaCl2 are all predicted18 to be linear molecules in agreement with experiment.67,95,96 and the results of Kaupp et al.94 at the CISD+Q level. The potential energy surface for bending in SrCl2 is very flat and the linear structure is only 0.04 kcal/mol above the structure with an angle of 160°. This leads to a very anharmonic bend with a very low bending

8 ACS Paragon Plus Environment

Page 8 of 41

Page 9 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

frequency of 7 cm-1 as compared to a harmonic value of 26 cm-1. Hargittai and co-workers 97 have studied SrCl2 in detail experimentally using high temperature (1500 K) electron diffraction and computationally at the MP2 level including all electrons with large basis sets. They also checked their MP2 results with limited CCSD(T) calculations. They describe SrCl2 as being quasilinear and having a complex bending potential. They also showed that the angle is very temperature dependent. They predict the molecule to be bent with a bond angle between 155º and 160º. They predict a harmonic bending frequency of 25.5 cm-1 as predicted by us with a barrier to linearity of 0.1 kcal/mol. They solved for the frequencies in a one-dimensional approximation but did not report the values for the bend except to note that the results show splitting due to the presence of the small barrier and that the ZPE is quite low. All of the results for SrCl2 point to a very low frequency bend with a contribution to the ZPE of < 0.05 kcal/mol. The bond angles for BaCl2 and RaCl2 are significantly smaller, both near 130° and the molecules are clearly bent. The bond angles for the chlorides are larger than for the fluorides. The CISD+Q results of Kaupp et al.94 are consistent with our results for the bond angles of SrCl2 and BaCl2. Table 2. Calculated [CCSD(T)/awCVTZ] and Experimental Bond Distances and Angles for the Alkaline Earth Fluorides and Chlorides. Molecule SrF2 (1A1, C2v) BaF2 (1A1, C2v) RaF2 (1A1, C2v) SrCl2 (1A1, C2v)

CCSD(T) M–X (Å) 2.139 2.246 2.321 2.635

Expt.67 M–X (Å) 2.20 ± 0.03 2.32 ± 0.03 2.67 ± 0.03 2.625 ± 0.010a 2.606 ± 0.008a 2.82 ± 0.03

CCSD(T) ∠XMX (°) 136.4 123.1 120.7 161.4

Expt.67 ∠XMX (°) 108 [95] 120 ± 20 142.4 ± 4.0a

BaCl2 (1A1, C2v) 2.761 133.5 100 ± 20 1 RaCl2 ( A1, C2v) 2.845 130.4 a Ref. 97. First bond distance is measured value at 1500 K. Second bond distance is thermally corrected value. The angle is the value at 1500 K. 9 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 41

The geometry parameters for the mono and dihydroxides are reported in Table 3. The triatomic monohydroxides are linear. 98,99,100,101,102 The M-O bond distances (Table 3) follow the same patterns as for the fluorides. The bond distances are in reasonable agreement with the values reported in the JANAF Tables.67 The dihydroxides are bent with larger OMO bond angles than found for the difluorides but smaller than for the dichlorides. The M-OH bond angles for the dihydroxides are no longer linear and deviate by about 5 - 10° from linearity. The bond distance down the column increases from Sr to Ra following the pattern of the difluorides.

Table 3. Calculated [CCSD(T)/awCVTZ] and Experimental Bond Distances and Angles for the Alkaline Earths Hydroxides. Molecule SrOH (2Σ+, C∞v) BaOH (2Σ+, C∞v) RaOH (2Σ+, C∞v) Sr(OH)2 (1A1, C2v) Ba(OH)2 (1A1, C2v) Ra(OH)2 (1A1, C2v)

CCSD(T) CCSD(T) M–O (Å) O–H (Å) 2.118 0.955 2.220 0.957 2.306 0.957 2.176 0.955 2.291 0.957 2.365 0.957

CCSD(T) ∠OMO (°)

151.0 128.9 125.6

CCSD(T) ∠MOH (°) 180.0 180.0 180.0 174.5 169.8 169.7

Expt.67 M–O (Å) 2.111 2.201

Vibrational Frequencies The vibrational frequencies for the diatomics are given in Table 4. The frequencies for SrO and BaO are less than experiment by 5-15 cm-1 for ωe due to the predicted bond lengths being longer than the experimental values. The values for ωexe are larger than experiment by about 1 cm-1 for SrO77,78,80 and essentially identical to experiment for BaO.74,75,77, 78,80,81

The value for ωexe for RaO is predicted to be larger than for BaO.

10 ACS Paragon Plus Environment

Page 11 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

The Journal of Physical Chemistry

Table 4. CCSD(T) Calculated and Experimental Harmonic Frequencies (ωe) and Anharmonicities (ωexe) in cm-1 for the Alkaline Earth Metal Oxides, Monochlorides and Monofluorides. ωe awCVQZ awCV5Z awCVQZ-DKa,b Expt. 1 + SrO ( Σ ) 639.4 647.0 646.0 653.4977,78,80 BaO (1Σ+) 660.3 663.3 666.0 669.7674,75,77, 78,80,81 RaO (1Σ+) 596.5 603.2 611.9 2 + SrF ( Σ ) 499.5 500.6 500.6 502.484 BaF (2Σ+) 463.4 465.9 465.1 468.977 RaF (2Σ+) 432.8 435.0 434.6 2 + SrCl ( Σ ) 300.8 301.4 290.0 302.380,83,84 BaCl (2Σ+) 276.3 278.4 276.9 279.385 RaCl (2Σ+) 253.6 254.5 250.5 a Using DKH2 for Sr compounds and DKH3 for Ba and Ra compounds. Molecule

b

awCVQZ 5.00 1.98 2.98 2.17 1.84 1.65 1.10 0.79 0.70

The O and F 1s, and Cl 2s and 2p orbitals have been rotated into the correlated electron space.

11 ACS Paragon Plus Environment

ωexe awCV5Z awCVQZ-DKa,b 4.58 4.64 1.92 1.99 2.58 2.61 2.19 2.47 1.84 1.86 1.70 1.51 0.96 1.30 0.84 0.96 0.73 0.73

Expt. 3.96 2.028 2.27 1.79 0.95 0.89

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Table 5. Calculated [CCSD(T)/awCVTZ] and Experimental Vibrational Frequencies in cm−1 for the Alkaline Earth Dihalides. Calculated Anharm Expt.67 CCSD(T)/awCVTZ correcteda SrF2 (1A1) ν1(sym stretch - b2) 478.3 473.7 443 ν2(asym stretch - a1) 469.9 465.2 442 ν3(bending - a1) 75.9 72.7 82 1 BaF2 ( A1) ν1(sym stretch - a1) 437.4 433.7 413 ν2(asym stretch - b2) 418.5 414.8 390 ν3(bending - a1) 88.0 86.3 [64] 1 RaF2 ( A1) ν1(sym stretch - a1) 418.4 415.2 ν2(asym stretch - b2) 397.4 394.3 ν3(bending - a1) 79.8 78.0 1 b SrCl2( A1) ν1(asym stretch - b2) 313.0 310.9 300 ν2(sym stretch - a1) 262.7 260.1 270 ν3(bending - a1) 26.1 7.7 44 1 BaCl2 ( A1) ν1(asym stretch - b2) 259.7 258.8 265 ν2(sym stretch - a1) 270.0 267.2 255 ν3(bending - a1) 41.1 39.7 [36] 1 RaCl2 ( A1) ν1(asym stretch - b2) 248.0 247.2 ν2(sym stretch - a1) 247.6 246.9 ν3(bending - a1) 37.7 37.8 a CCSD(T)/awCVTZ with anharmonic corrections from MP2/awCVTZ/wCVTZ-PP(Sr,Ba,Ra). Molecule

b

Symmetry

The frequencies for SrCl2 were evaluated at 160°.

The values for ωe are within about 5 cm-1 of experiment for diatomic M-F, and the M-F values are in better agreement with experiment77,84 than for diatomic M-O. Again, the M-F values are lower than experiment consistent with the predicted bond lengths being too long. For the diatomic chlorides, all of the results are within 5 cm-1 of experiment,80,83,84,85 except for the awCVQZ-DK result for SrCl where the difference is about 10 cm-1. The estimated values in the JANAF Tables67 are consistent with our calculated values including anharmonic corrections for the difluorides and dichlorides (Table 5). SrCl2 is discussed in more detail above. 12 ACS Paragon Plus Environment

Page 12 of 41

Page 13 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

For the monohydroxides, the calculated Sr-O stretch for SrOH is essentially the same as the reported experimental value and the SrOH bend is ~12 cm-1 above the experimental value.98,99 For BaOH, the calculated Ba-O stretch is in within 10 cm-1 of experiment and the calculated bend is too high by about 20 cm-1.100 For Ba(OH)2, the two calculated OH stretches are within better than 10 cm-1 of experiment.102 In this case, the agreement with experiment for the two Ba-O stretches is not as good suggesting a possible role for matrix effects. Heats of Formation As the TAEs are the prime component of the heats of formation predictions, these are discussed first. The CBS-DTQ TAEs (Supporting Information) obtained with Eq. 2 are mostly within 0.5 kcal/mol of the CBS-Q5 values calculated with Eq. 1. The components for the total CBS-Q5 atomization energies are given in Table 7 and the heats of formation are given in Table 8. The comparison to experiment for the diatomic dissociation energies is given below in the discussion of the bond energies. The T1 diagnostic values 103 (Supporting Information) show that the wavefunctions are dominated by a single configuration. The largest T1 values are for the monoxides. We found that there are no doubles amplitude values above 0.05 for any of these monoxides, so they are truly dominated by a single configuration. In our previous work on BeO and MgO,18 we found that there was one doubles amplitude above 0.05 for BeO and MgO with that for MgO being the largest. For these two molecules, calculations were performed up to CCSDTQ and the correction was found to be 0.98 kcal/mol to the total atomization energy. Thus the corrections for higher order excitations will be smaller than this value for SrO, BaO, and RaO as they have even less multi-reference character. The only additional contribution to the total atomization energy to be discussed is that of ΔErel which includes a pseudopotential correction and scalar relativistic corrections for O, F, and Cl. The values of this correction range from -1.9 to +2.3 kcal/mol. The largest ΔErel corrections

13 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Table 6. Calculated and Experimental Vibrational Frequencies in cm−1 for the Alkaline Earth Hydroxides. Anharm Molecule Symmetry Calculateda Expt. correctedb SrOH(2Σ+) ν1(O-H stretch - σ) 3935.7 3766.9 3766 ± 1098 ν2(Sr-O stretch - σ) 536.6 523.6 526.9999 ν3(Sr-O-H bend - π) 400.6 375.3 363.6999 BaOH(2Σ+) ν1(O-H stretch - σ) 3904.0 3734.9 ν2(Ba-O stretch - σ) 494.4 ± 493.6 483.1 0.8100 ν3(Ba-O-H bend - π) 341.6 ± 379.9 363.7 0.6100 RaOH(2Σ+) ν1(O-H stretch - σ) 3903.7 3733.7 ν2(Ba-O stretch - σ) 461.5 451.6 ν3(Ba-O-H bend - π) 378.7 366.5 Sr(OH)2 ν1(O-H sym stretch - b2) 3931.8 3763.7 1 ( A1) ν2(O-H asym stretch - a1) 3930.7 3762.7 ν3(O-Sr-O sym stretch - b2) 508.7 496.4 ν4(O-Sr-O asym stretch - a1) 500.3 489.0 ν5(H-O out-of-plane-wag - a2) 454.6 419.2 ν6(H-O out-of-plane-twist - b1) 449.7 418.6 ν7(H-O in-plane-wag - a1) 444.8 415.3 ν8(H-O in-plane-twist - b2) 440.2 405.2 ν9(O-Sr-O bend - a1) 44.8 43.0 Ba(OH)2 ν1(O-H sym stretch - b2) 3897.4 3725.8 3723102 (1A1) ν2(O-H asym stretch - a1) 3897.0 3725.3 3718102 ν3(O-Ba-O sym stretch - a1) 469.7 387.4 410102 ν4(O-Ba-O asym stretch - b2) 442.2 374.7 422.8102 ν5(H-O out-of-plane-wag - a2) 425.0 389.8 ν6(H-O out-of-plane-twist - b1) 422.1 359.2 ν7(H-O in-plane-wag - a1) 405.3 317.9 ν8(H-O in-plane-twist - b2) 384.9 370.3 ν9(O-Ba-O bend - a1) 72.2 76.4 Ra(OH)2 ν1(O-H sym stretch - b2) 3898.0 3730.7 1 ( A1) ν2(O-H asym stretch - a1) 3897.8 3730.7 ν3(O-Ra-O sym stretch - a1) 451.6 442.0 ν4(O-Ra-O asym stretch - b2) 422.4 402.4 ν5(H-O out-of-plane-wag - a2) 416.0 397.8 ν6(H-O out-of-plane-twist - b1) 415.6 404.7 14 ACS Paragon Plus Environment

Page 14 of 41

Page 15 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

a

ν7(H-O in-plane-wag - a1) 399.5 375.3 ν8(H-O in-plane-twist - b2) 378.6 357.9 ν9(O-Ra-O bend - a1) 67.1 67.3 b CCSD(T)/awCVTZ. CCSD(T)/awCVTZ with Anharmonic correction from MP2/awCVTZ

/wCVTZ-PP(Sr,Ba,Ra) and UMP2/awCVTZ /wCVTZ-PP(Sr,Ba,Ra) for open shells.

are found for compounds containing Ra. For all atoms, the oxides show the largest corrections with that for BaO being -1.9 kcal/mol and that for RaO being +2.2 kcal/mol. The value for SrO is 1.3 kcal/mol. We note that the only other two large corrections are for RaF of 0.8 kcal/mol and for RaF2 of 1.1 kcal/mol. The experimental heats of formation and the corresponding bond dissociation energies of SrO and BaO have been previously reviewed.8 For SrO, the heat of formation is within the experimental8,67 error bars of ±4 kcal/mol and very similar to the value derived in a review from spectroscopic measurements.8 For BaO, the calculated heat of formation is in very good agreement with the experiment; within the ±1.9 kcal/mol error bar for the more negative experimental value,67 and is significantly more negative than the average value given in a review.8 Thus, we suggest that the experimental value for the heat of formation from thermodynamic Knudsen cell measurements of BaO be further examined, and we confirm the value for SrO derived from the spectroscopic information. The heats of formation of SrF and BaF are in excellent agreement with experiment67 considering the ±2 kcal/mol error bars from experiment. The same is true for SrCl and BaCl and we note that the BaCl experimental67 error bar is larger at ±3 kcal/mol. For the difluorides, the calculated heats of formation are significantly more negative than the experimental values67 which have small error bars of ±1 kcal/mol suggesting an issue with

15 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 41

the experimental values. We note that the heats of formation of the dichlorides are closer to experiment, with BaCl2 just outside of the experimental67 ±4 kcal/mol error bars. Table 7. CCSD(T) Calculated and Experimental Total Atomization Energies at 0 K in kcal/mol. Molecule

ΣD0,0K

ΔECBSa

ΔErelb

ΔEZPEc

ΔESOd

98.62

1.30

-0.92

-0.22

98.79

134.20 106.44 128.48 138.81 128.01

-1.89 2.22 0.02 -0.25 0.82

-0.95 -0.85 -0.72 -0.66 -0.62

-0.22 -0.22 -0.39 -0.39 -0.39

131.15 107.58 127.40 137.50 127.82

e

CCSD(T)

SrO ( Σ ) 1 +

BaO ( Σ ) 1 +

RaO ( Σ ) SrF (2Σ+) BaF (2Σ+) RaF (2Σ+) 1 +

SrCl ( Σ ) 2 +

99.97

-0.10

-0.43

-0.84

98.60

Expt. 101.9±1.5 (298 K)105 115.5385 134.3±3.2 (298 K)105 133.5285 128.6785 139.5185 97.8 (298 K)105 95.9285 104.9285 82±1869

BaCl (2Σ+) 109.24 0.16 -0.40 -0.84 108.16 2 + RaCl ( Σ ) 99.97 0.22 -0.36 -0.84 98.99 1 SrF2 ( A1) 266.47 -0.25 -1.45 -0.78 264.98 1 BaF2 ( A1) 279.59 -0.03 -1.35 -0.78 277.43 1 RaF2 ( A1) 261.84 1.08 -1.28 -0.78 260.86 1 SrCl2 ( Σg) 214.74 -0.21 -0.80 -1.68 212.05 1 BaCl2 ( A1) 226.42 0.13 -0.76 -1.68 224.11 1 RaCl2 ( A1) 210.68 0.15 -0.71 -1.68 208.44 2 + SrOH ( Σ ) 203.75 -0.16 -7.42 -0.22 195.94 2 + BaOH ( Σ ) 213.66 -0.10 -7.27 -0.22 206.07 2 + RaOH ( Σ ) 202.28 0.63 -7.23 -0.22 195.47 1 Sr(OH)2 ( A1) 417.71 -0.68 -15.02 -0.44 401.57 1 Ba(OH)2 ( A1) 428.29 -0.02 -14.48 -0.44 413.34 1 Ra(OH)2 ( A1) 410.25 0.61 -14.55 -0.44 395.87 a Extrapolated CCSD(T)/awCVnZ energies with n = Q and 5 using Eq. 1. b ΔErel = ΔEawCVTZ-DK ΔEawCVTZ. c CCSD(T)/awCVnZ, n = Q for diatomics and n = T for the rest including anharmonic corrections from MP2/awCVTZ/wCVTZ-PP(Sr,Ba,Ra) (see supporting Information).

d

Experimental atomic spin-orbit corrections (-0.22, -0.84 and -0.39 kcal/mol for O, Cl and F and 0 kcal/mol for H, Sr, Ba and Ra); Reference 66. e Eq. 3: ΣD0 = ΔECBS + ΔErel + ΔEZPE + ΔESO. 16 ACS Paragon Plus Environment

Page 17 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

Table 8. CCSD(T) Calculated and Experimental Heats of Formation at 0 K and 298 K in kcal/mol.a Molecule SrO (1Σ+) BaO (1Σ+) RaO (1Σ+) SrF (2Σ+) BaF (2Σ+) RaF (2Σ+) SrCl (2Σ+) BaCl (2Σ+) RaCl (2Σ+) SrF2 (1A1) BaF2 (1A1) RaF2 (1A1) SrCl2 (1Σg) BaCl2 (1A1) RaCl2 (1A1) SrOH (2Σ+) BaOH (2Σ+) RaOH (2Σ+) Sr(OH)2 (1A1) Ba(OH)2 (1A1) Ra(OH)2 (1A1) a The Ra values

ΔHf,0K CCSD(T) Expt.67

ΔHf,298K CCSD(T)

-0.5

-2.8 ± 4.0

-1.0

-29.2

-29.1 ± 1.9

-29.7

Expt.67 -3.2 ± 4.0 0.4 ± 3.68 -29.6 ± 1.9 -26.9 ± 1.28

-12.3/-9.7 -12.8/-10.2 -69.6 -70.0 ± 2.0 -70.0 -70.4 ± 2.0 -76.0 -76.5 ± 2.0 -76.5 -77.0 ± 2.0 -73.0/-70.4 -73.4/-70.8 -30.7 -29.3 ± 2.0 -31.0 -29.6 ± 2.0 -36.6 -33.6 ± 3.0 -37.0 -34.0 ± 3.0 -34.0/-31.4 -34.4/-31.8 -187.7 -182.6 ± 1.0 -188.3 -183.1 ± 1.0 -197.5 -191.6 ± 1.5 -198.1 -192.1 ± 1.5 -187.6/-185.0 -188.1/-185.5 -115.6 -112.8 ± 1.5 -116.7 -113.1 ± 1.5 -123.9 -118.9 ± 4.0 -124.3 -119.2 ± 4.0 -114.9/-112.3 -115.2/-112.6 -46.0 -48.11 ± 5.0 -47.0 -49.1 ± 5.0 -52.5 -53 ± 7 -53.4 -54 ± 7 -48.5/-45.9 -49.5/-46.9 -141.0 -141 ± 10 -143.6 -142 ± 10 -149.1 -148 ± 9 -151.8 -150 ± 9 -138.3/-135.7 -140.0/-137.4 are given in the order of using the heat of formation of Ra, ΔHf,0K(Ra) = 36.35

kcal/mol from Ref. 68 and after the slash ΔHf,0K(Ra) = 38.95 ± 2.0 kcal/mol from Ref 69.

For the monohydroxides, the calculated heats of formation are within the range of the rather large experimental67 error bars of up to ±7 kcal/mol, with the calculated values within 1 to

17 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 41

2 kcal/mol of experiment. For the dihydroxides, the calculated values are in excellent agreement with experiment67 even though there are very large error bars. Neese and co-workers41 calculated the energies of reaction 4 where M = Sr, Ba and X = F, Cl at the CCSD(T) and DLPNO-CCSD(T) levels of theory. We can also calculate these values from the current heats of formation M(g) + X2(g) → MX2(g)

(4)

using the atomic heats of formation for the atoms and the heats of formation of F2 and Cl2 which are 0.0 kcal/mol at this level of theory in agreement with experiment.104 The calculated values at 298 K from Neese and co-workers41 (-229.0, -242.9, -156.9, and -168.8 kcal/mol for SrF2, BaF2, SrCl2, and BaCl2, respectively) are within 2.5 kcal/mol of our values (-227.5, -240.9, -155.9, and -167.1 kcal/mol for SrF2, BaF2, SrCl2, and BaCl2, respectively). This is reasonable agreement considering that they used different geometries and frequencies obtained from density functional theory calculation and we have included additional relativistic corrections. The agreement between the two sets of calculations confirms the assessment that there are issues with the experimental heats of formation of SrF2 and BaF2. Bond Dissociation Energies (BDEs) The BDEs85,105,106 and heats of formation are obviously linked for the diatomics. Less reliable BDEs for the MO diatomics have been reported in the literature. 107 The calculated BDEs are reported in Table 9. The calculated values for SrO and BaO are smaller than either of the experimental measurements.85,105 The SrO BDE is closer to the value105 of 101.9 kcal/mol; the BaO BDE is within the experimental error bars and closer to the experimental value of 133.5 kcal/mol. A crossed beam chemiluminescence study of the reaction of the alkaline earths with ClO2 gave lower limit BDEs. 108 The calculated BDE for SrO is significantly below the chemiluminescence value but the calculated BDE for BaO is in good

18 ACS Paragon Plus Environment

Page 19 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

Table 9. CCSD(T) Calculated and Experimental Bond Dissociation Energies in kcal/mol at 0 K. Molecule SrO (1Σ+) BaO (1Σ+)

Product Sr + O Ba + O

CCSD(T) 98.8 131.1

RaO (1Σ+) SrF (2Σ+) BaF (2Σ+) RaF (2Σ+) SrCl (2Σ+) BaCl (2Σ+)

Ra + O Sr + F Ba + F Ra + F Sr + Cl Ba + Cl

107.6 127.4 137.5 127.8 98.6 108.2

RaCl (2Σ+) SrF2 (1A1) BaF2 (1A1) RaF2 (1A1) SrCl2 (1Σg) BaCl2 (1A1) RaCl2 (1A1) SrOH (2Σ+)

Ra + Cl SrF + F BaF + F RaF + F SrCl + Cl BaCl + Cl RaCl + Cl Sr + OH SrO + H 2 + BaOH ( Σ ) Ba + OH BaO + H 2 + RaOH ( Σ ) Ra + OH RaO + H 1 Sr(OH)2 ( A1) SrOH + OH Ba(OH)2 (1A1) BaOH + OH Ra(OH)2 (1A1) RaOH + OH

Expt.105 101.9 ±1.5, 115.5,85 ≥107.7±3.5108 134.3 ±3.2, 133.5,85 ≥133.6±3.5,108 133.5±1.3109 129.5±1.6, 126.8, 128. 785 140.3 ±1.6 , 136.6 , 138.8, 139.585 97.8, 95.6 ± 1.6,106 95.9285 104.2 ±2, 105.8, 106.8 ± 2.2,106 104.985 82±1869 131.7 134.1

99.0 136.6 139.9 133.0 113.5 116.0 109.4 94.2 97.2 104.4 74.9 93.8 87.9 103.9 105.6 98.7

112.5 114.2 97.2, 92 ±4, 95 ± 3106 98.0 107, 107 ±4, 105.8, 111± 14106 76.6

102.0 99, 104.5

agreement, within the experimental error bars. Another chemiluminescent reaction study 109 of the reaction Ba + CO2 gave a BDE value with smaller error bars in excellent agreement with our calculated value. The experimental BDEs from these experiments were not included in the evaluation8 of the heat of formation of BaO but they do confirm our calculated value for

19 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ΔHf(BaO), suggesting that there is a consistent error in the Knudsen cell measurements. However, the calculated value for the SrO BDE is in excellent agreement with the average spectroscopic value from an extensive review,8 which suggests an issue with the chemiluminescence values for SrO. We note that there is a significant increase in the BDE from SrO to BaO followed by a decrease from BaO to RaO. The BDE for RaO is larger than that for SrO. The calculated BDEs for Sr-F and Ba-F are in agreement with the available experimental values85,105 given the error bars of the latter quantities. The M-F BDE increases from Sr-F to BaF and then decreases to Ra-F, just as found for the oxides. The Sr-F and Ra-F BDEs are almost identical. The M-F BDEs are larger than the M-O BDEs even though we would formally write a single bond for the M-F and a double bond for the M=O. The BDEs for Sr-F and Ra-F are substantially larger than those of Sr-O and Ra-O, respectively, and the Ba-F BDE is only slightly larger than for Ba-O. The calculated BDEs for Sr-Cl and Ba-Cl are in agreement with experiment85,105,106 and that for Ra-Cl is within the larger error bound of the experimental value.69 The M-Cl BDEs follow the same trend as the M-F BDEs as one goes down the column. The Sr-Cl and Ra-Cl BDEs are comparable to the corresponding Sr-O and Ra-O BDEs. The first BDEs for SrF2 and SrCl2 are larger than the second value. The values are more similar to each other than for the monohalides, and the Sr-X and Ba-X dissociation energies are closer to each other even though the Ba-X values are always the largest. The Ra-X first BDEs are always the smallest. The first Sr-F BDE is larger than experiment and the first Sr-Cl BDE is in good agreement with experiment suggesting that the M-F values need to be reevaluated.105

20 ACS Paragon Plus Environment

Page 20 of 41

Page 21 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

There are two BDEs to consider for MOH, the M-OH and the MO-H. For SrOH, the O-H BDE is larger than the Sr-OH BDE and this is reversed for BaOH. The change is probably due to the strength of the BaO BDE. For RaOH, the Ra-OH BDE is larger than the RaO-H BDE. The M-OH BDEs follow the same trends as the M-F and M-Cl BDEs with the Ba-OH BDE being the largest and the Sr-OH and Ra-OH BDEs being comparable. The M-OH BDEs are smaller than the M-F BDEs. For M(OH)2, the first BDE for Sr and Ba are comparable and slightly larger than that for Ra. In all cases, the first M-OH BDE is larger than the second just as found for the dihalides. The M-OH and MO-H BDEs for Sr and Ba are in very good agreement with the experimental values105 for MOH given the lack of any error bars on the experimental values. In a similar way, the M-OH BDE for M(OH)2 is also in good agreement with experiment.105 Cohesive energies The cohesive energy of a solid67,69 is the energy required to convert the solid into the gas. The cohesive energy is usually applied to metals and is equivalent to the sublimation energy. All that is required to calculate the cohesive energy are the heat of formation of the solid and that of the gas phase species. We are interested in vaporizing to the particular molecular monomer. The cohesive energies for all alkaline earths are reported in Table 10. The cohesive energy of the oxides decreases from BeO/MgO to BaO and then increases to RaO. There is a large decrease from SrO to BaO. The difluorides behave in a different manner. There is a substantial increase from BeF2 to MgF2 and the values increase to CaF2. The cohesive energy for SrF2 is comparable to that for CaF2 and there is decrease to BaF2 followed by an increase to RaF2. The decrease for BaF2 is consistent with the strong bonds in BaF2. The chlorides show an interesting pattern of increasing from a low value of 32 kcal/mol for BeCl2 to a value of ~95 kcal/mol for RaCl2. The dihydroxides show an increase from Be(OH)2 to Mg(OH)2 and the

21 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Table 10. CCSD(T) Calculated Cohesive Energies in kcal/mol.a ΔHf,298K (gas) ΔHf,298K (solid) Cohesive Energy 67 CCSD(T) Expt. CCSD(T) - Expt. BeO 30.1 -145.4 175.5 MgO 32.3 -143.7 176.0 CaO 4.7 -151.8 156.5 SrO -1.0 -141.5 ± 0.8 140.5 BaO -29.7 -131.0 ± 0.5 101.3 69 RaO -12.8/-10.2 -123.0 110.2/112.8 BeF2 -190.1 -245.4 55.4 MgF2 -174.4 -268.7 94.3 CaF2 -189.1 -293.0 103.9 SrF2 -188.3 -290.9 ± 0.7 102.6 BaF2 -198.1 -288.9 ± 1.0 90.8 69 RaF2 -188.1/-185.5 -282.4 94.3/96.9 BeCl2 -86.5 -118.6 32.1 MgCl2 -95.1 -153.3 58.2 CaCl2 -114.9 -190.2 75.3 SrCl2 -116.7 -198.1 ± 0.6 81.4 BaCl2 -124.3 -205.2 ± 3 80.9 69 RaCl2 -115.2/-112.6 -207.7 92.5/95.1 Be(OH)2 -150.8 -216.5 65.7 Mg(OH)2 -132.8 -221.0 88.2 Ca(OH)2 -146.6 -235.7 89.1 Sr(OH)2 -143.6 -231.6 ± 2.2 88.0 Ba(OH)2 -151.8 -226.2 ± 1.5 74.5 69 Ra(OH)2 -140.0/-137.4 -221.2 81.2/83.8 a The Ra values are given in the order using the heat of formation of Ra, ΔHf,0K(Ra) = 36.35 Molecule

kcal/mol from Ref. 68 and after the slash ΔHf,0K(Ra) = 38.95 ± 2.0 kcal/mol from Ref 69. The gas phase values for Be, Mg, and Ca are from Ref. 18. values for Mg to Sr are comparable. There is a decrease from Sr to Ba followed by an increase to Ra. We note that the cohesive energies for the Be compounds are actually quite low with only 32 kcal/mol required for the enthalpy of sublimation for BeCl2 and only 55 kcal/mol required for 22 ACS Paragon Plus Environment

Page 22 of 41

Page 23 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

BeF2. The energy required to sublime MgCl2 is also low at 58 kcal/mol. Of further interest is the result that the Ra compounds have reasonably large enthalpies of sublimation from 80 to 110 kcal/mol with the lowest being near 81 kcal/mol for Ra(OH)2. Fluoride affinity The gas phase fluoride affinity (FA) provides a measure of the Lewis acidity110 and is defined as the negative of the enthalpy of reaction (5). A + F− → AF−

(5)

Addition of an F- to MF2 leads to a D3h MF3- anion and the M-F bond distances increase by 0.07 to 0.14 Å (Table 11). The smallest M-F bond distance increase is predicted for Mg which has the

Table 11. CCSD(T) Calculated Fluoride Affinities in kcal/mol at 0 K and M-F Bond Distances in Å for all the alkaline earth MF2 and MF3-.a CCSD(T)/awCVTZ CCSD(T)/awCVTZ Δr(M-F)c M–F (Å) in MF2 M–F (Å) in MF3-b BeF2 (1Σg+) 88.1 1.377 1.472 0.095 1 + MgF2 ( Σg ) 91.1 1.742 1.812 0.070 1 CaF2 ( A1, C2v) 83.7 2.013 2.090 0.077 1 SrF2 ( A1, C2v) 80.0 2.139 2.238 0.099 1 BaF2 ( A1, C2v) 71.5 2.246 2.380 0.134 1 RaF2 ( A1, C2v) 69.9 2.321 2.458 0.137 a b 1 MF2 for M = Be, Mg and Ca are from Reference 18. All the MF3 are A1', D3h.c Increase in the M-F bond distance on adding F-. Molecule

FA

highest FA, and the largest M-F increase in the distance is predicted for Ra which has the lowest calculated FA. The trend in the bond distance changes does follow the increase in atomic size of the central atom as one proceeds down the column, excluding Be which has a larger change in the bond distance. The FAs are also given in Table 11 for the MF2 molecules The fluoride affinities decrease from MgF2 to RaF2 consistent with a larger M-F bond distance and less stabilization of the F- by the M(II). The FA for BeF2 is slightly smaller than that for MgF2 due to 23 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

steric crowding in the former. The FAs show that the difluorides are modestly strong Lewis acids. The FAs are relevant to which species could be formed in molten salt reactors when fluoride is the dominant anion. Natural Population Analysis (NPA) The Natural Population Analysis based on the Natural Bond Orbitals (NBOs) 111,112 using NBO6 113,114 (Supporting Information) with wavefunctions calculated at the B3LYP/awCVTZ/wCVTZ-PP(Sr,Ba,Ra) using optimized CCSD(T) geometries was performed using Gaussian09.61 For the oxides under consideration, the positive charge on the alkaline earth is about 0.4 e less than the formal oxidation state charge of +2.0 e. Most of this charge difference from the formal charge is due to backbonding from the O2- to the alkaline earth valence d orbitals. The mono-substituted (halides and hydroxides) radicals have a charge that is within ~0.1 e of the formal charge of +1.0 e. The excess α spin is mostly localized in the valence s orbital of the alkaline earth. There is about 0.1 e of backbonding into the valence d orbital of the alkaline earth with the largest amount of backbonding predicted for BaCl, which has the lowest positive charge on the alkaline earth. The larger ionic character in the M-F bonds than the M-O bonds may contribute to the apparent increased strength of the M-F bonds as compared to the M-O bonds. The NPA calculated charges for the Sr, Ba, and Ra compounds show that the disubstituted compounds (halides and hydroxides) are more ionic than the oxides. The monosubstituted halide compounds are slightly more ionic than the corresponding di-substituted ones. The di-substituted compounds for Sr, Ba, and Ra all have positive charges of 1.8 to 1.9 e on the alkaline earth. We compare the NPA charges for all of the alkaline earth dihalides. For the difluorides, the least ionic molecule is BeF2. The backbonding from the two F- groups is split between the 2s

24 ACS Paragon Plus Environment

Page 24 of 41

Page 25 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

and 2p orbitals almost evenly. For MgF2, most of the backbonding is into the 3s with a small contribution into the 3p. Both BeF2 and MgF2 are linear. The valence d orbitals become available for CaF2 and all of the backbonding for the remainder of the alkaline earth difluorides is into the valence d. Beginning with CaF2, all of the heavier difluorides are bent. Thus the ability to bend correlates with the availability of the valence d orbital. The role of the d orbitals for CaF2 has been noted previously by Gole et al. 115 For the dichlorides, BeCl2 is the least ionic with 0.36 e in the 2s and 0.18 e in the 2p. MgCl2 is also less ionic than all of the fluorides and has 0.26 e in the valence 3s with only 0.05 e in the valence 3p. Both BeCl2 and MgCl2 are linear. Again, the availability of a valence d orbital shifts the backbonding into this orbital at CaCl2 and increases the ionicity. In contrast to the difluorides, however, there is a small backbonding into the valence s on the order of 0.03 to 0.06 e for CaCl2 to RaCl2. CaCl2 has the most backbonding into the valence d and s orbitals and is still linear. SrCl2 has less valence s and d backbonding than CaCl2 and is thus more ionic; SrCl2 is slightly bent, although it may be best described as highly fluxional and quasilinear as discussed above. BaCl2 has more valence d backbonding and less valence s backbonding than SrCl2 and is clearly bent even though it is less ionic than SrCl2. RaCl2 has essentially the same orbital backbonding as does SrCl2, yet it is clearly bent. Thus, the types of orbitals available for the backbonding and the size of the anion are key factors in determining if the molecules are bent or linear. The bent molecules, of course, show deviations from simple valence shell electron pair repulsion theory. 116 Conclusions Reliable geometry parameters and frequencies are reported at the CCSD(T) level of theory for the late alkaline earth metal (Sr, Ba and Ra) oxides, fluorides, chlorides and

25 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

hydroxides. Our calculated geometry parameters, frequencies, heats of formation and bond energies were compared with available experimental data and good agreement is found (within experimental errors) with reliable experimental results. The effects of anharmonicity on the quasilinear molecules for the ZPE are expected to be very small, < 0.1 kcal/mol. We suggest that our values for the thermodynamic heats of formation and the BDEs are the most accurate available with estimated uncertainties of ± 1 to 2 kcal/mol for all except the compounds containing Ra. The heats of formation of the Ra compounds have additional uncertainty due to the uncertainty in the heats of formation of the Ra atom and the lack of additional thermodynamic information against which to test the values for the heat of formation of gaseous Ra. The higher order corrections for the oxides which potentially have the most multi-reference character are expected to be significantly below 1 kcal/mol. This suggests that significant revisions may be needed for some of the gas phase heats of formation. We report the first reliable energetics, geometry parameters and frequencies for Ra oxides, fluorides, chlorides and hydroxides. The cohesive energies (heats of sublimation of the monomer) show that the values for the Be dihalides are quite low. In addition, the results show that the cohesive energies for the Ra compounds are substantial. The fluoride affinities show that the difluorides are moderately strong Lewis acids and that such trifluorides may form under the appropriate experimental conditions. The calculated charges on the alkaline earth suggest that di-substituted compounds (dihalides and dihydroxides) are more ionic than the corresponding monoxides. In addition, the charges for the dihalides and backbonding into the available valence orbitals on the alkaline earth correlate with whether these molecules are bent or linear. These calculated values provide a consistent set of thermodynamic data for use in further macroscopic simulations, for example, of molten salt reactors.

26 ACS Paragon Plus Environment

Page 26 of 41

Page 27 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

Acknowledgement D.A.D. thanks the U.S. Department of Energy, Office of Basic Energy Sciences, Geosciences program, for funding. KAP gratefully acknowledges funding from the U.S. Department of Energy, Office of Basic Energy Sciences, Heavy Element Chemistry Program through Grant No. DE-FG02-12ER16329. J.G.H. thanks the Engineering and Physical Sciences Research Council (UK) for project funding (EP/N02253X/1). D.A.D. thanks the Robert Ramsay Fund at the University of Alabama for partial support. Supporting Information Complete references for Ref. 61 and 62. Energy contributions to the total atomization energies. T1 diagnostic values at CCSD(T)/ aug-cc-pwCVQZ Level. Calculated ZPE including anharmonic corrections. Calculated and Experimental Vibrational Frequencies in cm−1 including anharmonic corrections. Calculated heats of formation at 0 K and 298K from the total atomization energies in kcal/mol at CCSD(T)/CBS-DTQ and CCSD(T)/CBS-TQ5 Levels. Total CCSD(T) and CBS energies in hartrees. The Natural Population Analysis based on the Natural Bond Orbitals. DFT optimized geometries for all group 2 dihalides. SrCl2 CCSD(T)/awCVTZ Frequencies.

27 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

References 1

Hastie, J. W. High Temperature Vapors-Science and Technology. Academic, New York, 1975.

2

Schofield, K. Flame Chemistry of Alkali and Alkaline Earth Metals. in Gas-Phase Metal

Reactions, Fontijn, A., ed., North-Holland, Amsterdam, 1992, pp. 529-571. 3

Fennell, P. S.; Dennis, J. S.; Hayhurst A. N. Production of Nanoparticles of MgO, BaO, and

A12O3 in a Premixed Flame and Its Relation to the Flame Structure. Combustion, Explosion, and Shock Waves, 2006, 42, 642–648. 4

England, W. B. Theoretical Studies of MHD Plasma Molecules. I. Potential Energy Curves and

Dipole moments of Linear KOH. J. Chem. Phys. 1978, 68, 4896-4900. 5

R. Dirscherl, K. W. Michel, and C. B. Cosmovici, On the Occurrence of Alkaline Earth and

Rare Earth Oxides in Sunspots and Cool Stars. Astron. Astrophys. 1978, 68, 381-387. 6

Drapatz, S.; Haser, L.; Michel, K.-W. Atomic and Molecular Properties of Metals from

Artificial Cloud Experiments in the Upper Atmosphere. Z. Naturforschung 1974, 29a, 411-418. 7

Murad, E. Thermochemical Properties of the Gaseous Alkaline Earth Monohydroxides. J.

Chem. Phys. 1981, 75, 4080-4085. 8

Huntelaar, M. E.; Codfunke, E. H. P. The Standard Molar Enthalpies of Formation of BaO(g)

and SrO(g). J. Chem. Thermo. 1997, 29, 817-826. 9

Ball, R. G. J.; Mignanelli, M. A.; Barry, T. I.; Gisby J. A. The Calculation of Phase Equilibria

of Oxide Core-Concrete Systems. J. Nuc. Mater. 1993, 201, 238-249. 10

Haubenre, P. N.; Engel, J. R. Experience with the Molten-Salt Reactor Experiment. Nucl.

Applic. Tech., 1970, 8, 118‐136. 11

Rosenthal, M. W.; Kasten, P. R.; Briggs, R. B. Molten-Salt Reactors—History, Status, and

Potential. Nucl. Applic. Tech., 1970, 8, 107‐118. 28 ACS Paragon Plus Environment

Page 28 of 41

Page 29 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

12

A Technology Roadmap for the Generation IV Nuclear Energy Systems, GIF‐002‐00, U.S.

DOE Nuclear Energy Research Advisory Committee and the Generation IV International Forum, 2002. 13

Forsberg, C. W.; Peterson, P. F.; Pickard, P. S. Molten-Salt-Cooled Advanced High-

Temperature Reactor for Production of Hydrogen and Electricity Nucl. Tech., 2003, 144, 289‐ 302 14

Hargraves, R.; Moir, R. Liquid Fluoride Thorium Reactors. Am. Scientist, 2010, 98, 304‐313

15

M. Chen, A. R. Felmy, and D. A. Dixon, Structures and Stabilities of (MgO)n Nanoclusters. J.

Phys. Chem. A, 2014, 118, 3136–3146 16

M. Chen, V. E. Jackson, A. R. Felmy, and D. A. Dixon, Structures and Energetics of

(MgCO3)n Clusters, n ≤ 16. J. Phys. Chem. A, 2015, 119, 3419–3428 17

Vasiliu, M.; Li, S.; Peterson, K. A.; Feller, D.; Gole, J. L.; Dixon D. A. Structures and Heats of

Formation of Simple Alkali Metal Compounds: Hydrides, Chlorides, Fluorides, Hydroxides and Oxides for Li, Na and K. J. Phys. Chem. A, 2010, 114, 4272-4281. 18

Vasiliu, M.; Li, S.; Feller, D.; Gole, J. L.; Dixon D. A. Structures and Heats of Formation of

Simple Alkaline Earth Metal Compounds: Fluorides, Chlorides, Oxides, and Hydroxides for Be, Mg, and Ca. J. Phys. Chem. A 2010, 114, 9349–9358. 19

Dixon, D. A.; Feller, D.; Peterson. K. A. A Practical Guide to Reliable First Principles

Computational Thermochemistry Predictions Across the Periodic Table. in Annual Reports in Computational Chemistry, Vol. 8, ed. R. A. Wheeler, Section Ed. G. S. Tschumper, Elsevier, Amsterdam, 2012, Chapt. 1, pp. 1-28

29 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

20

Feller, D.; Peterson, K. A.; Dixon, D. A. Further Benchmarks of a Composite, Convergent,

Statistically-Calibrated Coupled Cluster-Based Approach for Thermochemical and Spectroscopic Studies. Mol. Phys. 2012, 110, 2381–2399. 21

Peterson, K. A.; Feller, D.; Dixon, D. A. Chemical Accuracy in Ab Initio Thermochemistry

and Spectroscopy: Current Strategies and Future Challenges. Theor. Chem. Acc. 2012, 131, 1079-1 – 1079-20. 22

Purvis, G. D., III; Bartlett, R. J. A Full Coupled-Cluster Singles and Doubles Model: The

Inclusion of Disconnected Triples. J. Chem. Phys. 1982, 76, 1910-1918. 23

Raghavachari, K.; Trucks, G. W.; Pople, J. A.; Head-Gordon, M. A Fifth-order Perturbation

Comparison of Electron Correlation Theories. Chem. Phys. Lett. 1989, 157, 479-483. 24

Watts, J. D.; Gauss, J.; Bartlett, R. J. Coupled-Cluster Methods with Non-iterative Triple

Excitations for Restricted Open-Shell Hartree-Fock and Other General Single-Determinant Reference Functions. Energies and Analytical Gradients. J. Chem. Phys. 1993, 98, 8718-8733. 25

Bartlett, R. J.; Musial, M. Coupled-Cluster Theory in Quantum Chemistry. Rev. Mod. Phys.

2007, 79, 291-352. 26

Dunning, T. H., Jr. Gaussian Basis Sets for Use in Correlated Molecular Calculations. I. The

Atoms Boron Through Neon and Hydrogen. J. Chem. Phys. 1989, 90, 1007-1023. 27

Kendall, R. A.; Dunning, T. H., Jr.; Harrison, R. J. Electron Affinities of the First-Row Atoms

Revisited. Systematic Basis Sets and Wave Functions. J. Chem. Phys. 1992, 96, 6796-6806. 28

Hill, J. G. Gaussian Basis Sets for Molecular Applications. Int. J. Quantum Chem. 2013, 113,

21-34. 29

Vasiliu, M.; Peterson, K. A.; Dixon D. A. Benchmark-Quality Atomization Energies for BeH

and BeH2. J. Chem. Theor. Comp. 2017, 13, 649-653. 30 ACS Paragon Plus Environment

Page 30 of 41

Page 31 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

30

Fang, Z.; Vasiliu, M.; Peterson, K. A.; Dixon D. A. Prediction of Bond Dissociation

Energies/Heat of Formation for Diatomic Transition Metal Compounds: CCSD(T) Works. J. Chem. Theor. Comp. 2017, 13, 1057-1066. 31

Cheng, L.; Gauss, J.; Ruscic, B.; Armentrout, P. B.; Stanton. J. F. Bond Dissociation Energies

for Diatomic Molecules Containing 3d Transition Metals: Benchmark Scalar-Relativistic Coupled-Cluster Calculations for 20 Molecules. J. Chem. Theor. Comp. 2017, 13, 1044−1056. 32

Koput, J.; Roszczak, A. CaF2 As a Quasilinear Molecule:  the Vibrational−Rotational Energy

Levels Predicted by Ab Initio Quantum Chemistry Approach J. Phys. Chem. A 2004, 108, 92679273. 33

Haworth, N. L.; Sullivan, M. B.; Wilson, A. K.; Martin, J. M. L.; Radom, L. Structures and

Thermochemistry of Calcium-Containing Molecules. J. Phys. Chem. A 2005, 109, 9156-9168. 34

Yang, C.-H.; Zhang, X.; Han, K.-L. Theoretical study on analytical potential function and

spectroscopic parameters for CaF molecule J. Mol. Struct. (THEOCHEM) 2004, 678, 183-188. 35

Koput, J.; Peterson, K. A. Ab Initio Prediction of the Potential Energy Surface and

Vibrational−Rotational Energy Levels of X2A‘ BeOH J. Phys. Chem. A 2003, 107, 3981-3986. 36

Sullivan, M. B.; Iron, M. A.; Redfern, P. C.; Martin, J. M. L.; Curtiss, L. A.; Random, L. Heats

of Formation of Alkali Metal and Alkaline Earth Metal Oxides and Hydroxides: Surprisingly Demanding Targets for High-Level ab Initio Procedures J. Phys. Chem. A 2003, 107, 5617-5730. 37

Ho, D. S.; DeYonker, N. J.; Wilson, A. K.; Cundari, T. R. Accurate Enthalpies of Formation

of Alkali and Alkaline Earth Metal Oxides and Hydroxides:  Assessment of the Correlation Consistent Composite Approach (ccCA). J. Phys. Chem. A 2006, 110, 9767-9770.

31 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

38

DeYonker, N. J.; Ho, D. S.; Wilson, A. K.; Cundari, T. R. Computational s-Block

Thermochemistry with the Correlation Consistent Composite Approach J. Phys. Chem. A 2007, 111, 10776-10780. 39

Iron, M.A.; Oren, M.; Martin, J.M.L. Alkali and alkaline earth metal compounds: core-valence

basis sets and importance of subvalence correlation Mol. Phys. 2003, 101, 1345-1361. 40

Hassett, D. M.; Marsden, C. J. The Shapes and Bending Potentials of Monomeric MgF2 and

CaF2. J. Molec. Struct., 1995, 346, 249-263. 41

Minenkov, Y.; Bistoni, G.; Riplinger, C.; Auer, A. A.; Neese, F.; Cavallo, L. Pair Natural

Orbital and Canonical Coupled Cluster Reaction Enthalpies Involving Light to Heavy Alkali and Alkaline Earth Metals: The Importance of Sub-valence Correlation. Phys.Chem.Chem.Phys. 2017, 19, 9374-9391. 42

Peterson, K. A. Systematically Convergent Basis Sets with Relativistic Pseudopotentials. I.

Correlation Consistent Basis Sets for the Post-d Group 13 – 15 Elements J. Chem. Phys. 2003, 119, 11099-11112. 43

Peterson, K. A.; Figgen, D.; Goll, E.; Stoll, H.; Dolg, M. Systematically Convergent Basis Sets

with Relativistic Ppseudopotentials. II. Small-Core Pseudopotentials and Correlation Consistent Basis Sets for the Post-d Group 16–18 Elements. J. Chem. Phys. 2003, 119, 11113-11123. 44

Peterson, K. A.; Puzzarini, C. Systematically Convergent Basis Sets for Transition Metals. II.

Pseudopotential-Based Correlation Consistent Basis Sets for the Group 11 (Cu, Ag, Au) and 12 (Zn, Cd, Hg) Elements Theor. Chem. Acc. 2005, 114, 283-296. 45

Peterson, K. A.; Figgen, D.; Dolg, M.; Stoll, H. Energy-Consistent Relativistic

Pseudopotentials and Correlation Consistent Basis Sets for the 4d Elements Y-Pd. J. Chem. Phys. 2007, 126, 124101-1 – 124101-12. 32 ACS Paragon Plus Environment

Page 32 of 41

Page 33 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

46

Peterson, K. A. Gaussian Basis Sets Exhibiting Systematic Convergence to the Complete Basis

Set Limit. In Annual Reports in Computational Chemistry; Spellemmeyer, D. C., Wheeler, R. A., Eds.; Elsevier, B. V.: Amsterdam, The Netherlands, 2007; Vol 3, Chapt. 11, pp. 195-206. 47

Li, H.; Feng, H.; Sun, W.; Zhang, Y.; Fan, Q.; Peterson, K. A.; Xie, Y.; Schaefer, H. F., III,

The Alkaline Earth Dimer Cations (Be2+, Mg2+, Ca2+, Sr2+, and Ba2+). Coupled Cluster and Full Configuration Interaction Studies. Mol. Phys. 2013, 111, 2292-2298. 48

Hill, J. G.; Peterson, K. A. Gaussian Basis Sets for Use in Correlated Molecular Calculations.

XI. Pseudopotential-Based and All-Electron Relativistic Basis Sets for Alkali Metal (K–Fr) and Alkaline Earth (Ca–Ra) Elements. J. Chem. Phys. Accepted, Dec. 1, 2017. 49

Peterson, K. A.; Dunning, T. H., Jr. Accurate Correlation Consistent Basis Sets for Molecular

Core-Valence Correlation Effects. The Second Row Atoms Al - Ar, and the First Row Atoms B Ne Revisited. J. Chem. Phys. 2002, 117, 10548-10560. 50

Lim, I. S.; Stoll, H.; Schwerdtfeger, P. Relativistic Small-Core Energy-Consistent

Pseudopotentials for the Alkaline-Earth Elements from Ca to Ra. J. Chem. Phys. 2006, 124, 034107-1 - 034107-9. 51

Martin, J. M. L. Ab Initio Total Atomization Energies of Small Molecules - Towards the Basis

Set Limit. Chem. Phys. Lett. 1996, 259, 669-678. 52

Feller, D.; Peterson, K.A.; Hill, J. G. On the effectiveness of CCSD(T) complete basis set

extrapolations for atomization energies. J. Chem. Phys. 2011, 135, 044102-1 - 044102-18. 53

Peterson, K. A.; Woon, D. E.; Dunning, T. H., Jr. Benchmark Calculations with Correlated

Molecular Wave Functions. IV. The Classical Barrier Height of the H + H2 → H2 + H Reaction. J. Chem. Phys. 1994, 100, 7410-7415. 54

Dunham, J. L. The Energy Levels of a Rotating Vibrator. Phys. Rev. 1932, 41, 721-731. 33 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

55

Dunham, J. L. The Wentzel-Brillouin-Kramers Method of Solving the Wave Equation. Phys.

Rev. 1932, 41, 713-720. 56

Clabo, D. A.; Allen, W. D.; Remington, R. B.; Yamaguchi, Y.; Schaefer, H. F., III, A

Systematic Study of Molecular Vibrational Anharmonicity and Vibration-Rotation Interaction by Self-Consistent-Field Higher-Derivative Methods – Asymmetric-top Molecules. Chem. Phys. 1988, 123, 187-239. 57

Barone, V. Vibrational Zero-Point Energies and Thermodynamic Functions Beyond the

Harmonic Approximation J. Chem. Phys. 2004, 120, 3059-3065. 58

Barone, V. Anharmonic Vibrational Properties by a Fully Automated Second-Order

Perturbative Approach. J. Chem. Phys. 2005, 122, 014108-1 - 014108-10. 59

Møller, C.; Plesset, M. S. Note on an Approxination Treatment for Many-Electron Systems.

Phys. Rev. 1934, 46, 0618-0622. 60

Pople, J. A.; Binkley, J. S.; Seeger, R. Variational Configuration Interaction methods and

Comparison with Perturbation Theory. Int. J. Quantum. Chem. 1976, 10, 1-19. 61

Frisch, M. J.; Trucks, G. W.; Schlegel, H. B.; Scuseria, G. E.; Robb, M. A.; Cheeseman, J. R.;

Scalmani, G.; Barone, V.; Mennucci, B.; Petersson, G. A.; et al. Gaussian 09, revision B.01; Gaussian, Inc.: Wallingford, CT, 2009. 62

Werner H.-J.; Knowles, P. J.; Knizia, G.; Manby, F. R.; Schütz, M.; Celani, P.; Korona, T.;

Lindh, R.; Mitrushenkov, A.; Rauhut, G.; et al. MOLPRO, Version 2012.1, A Package of Ab Initio Programs, See http://www.molpro.net. Accessed 10-01-2012. 63

Werner H.-J.; Knowles, P. J.; Knizia, G.; Manby, F. R.; Schütz, M. Molpro: A General

Purpose Quantum Chemistry Program Package. WIREs Comput. Mol. Sci. 2012, 2, 242-253.

34 ACS Paragon Plus Environment

Page 34 of 41

Page 35 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

64

Senekowitsch, J. Spektroskopische Eigenschaften aus Elektronischen Wellenfunktionen, Ph.D.

Thesis, Universität Frankfurt, Frankfurt, Germany, 1988. 65

de Jong, W. A.; Harrison, R. J.; Dixon, D. A. Parallel Douglas-Kroll Energy and Gradients in

NWChem: Estimating Scalar Relativistic Effects Using Douglas-Kroll Contracted Basis Sets. J. Chem. Phys. 2001, 114, 48-53. 66

Moore, C. E. Atomic Energy Levels as Derived from the Analysis of Optical Spectra, Volume

1, H to V; U.S. National Bureau of Standards Circular 467; U.S. Department of Commerce, National Technical Information Service, COM-72-50282: Washington, D C, 1949. 67

Chase, M. W., Jr. NIST-JANAF Thermochemical Tables, 4th ed.; J. Phys. Chem. Ref. Data,

Mono. 9; American Institute of Physics: Woodbury, NY, 1998; Suppl 1. 68

Lias, S. G.; Bartmess, J. E.; Liebman, J. F.; Holmes, J. L.; Levin, R. D.; Mallard, W. G. J.

Phys. Chem. Ref. Data 1988, 17 (Suppl. 1). 69

Yungman, V. S.; Glushko, V. P.; Medvedev, V. A.; Gurvich, L. V., Eds., Thermal Constants

of Substances, 8 Vols., Wiley: New York, 1999. 70

Curtiss, L. A.; Raghavachari, K.; Redfern, P. C.; Pople, J. A. Assessment of Gaussian-2 and

Density Functional Theories for the Computation of Enthalpies of Formation. J. Chem. Phys. 1997, 106, 1063-1079. 71

Deegan, M. J. O.; Knowles, P. J.: Perturbative Corrections to Account for Triple Excitations in

Closed and Open Shell Coupled Cluster Theories. Chem. Phys. Lett. 1994, 227, 321-326. 72

Rittby, M.; Bartlett, R. J.: An Open-Shell Spin-Restricted Coupled Cluster Method:

Application to Ionization Potentials in N2. J. Phys. Chem. 1988, 92, 3033-3036. 73

Knowles, P. J.; Hampel, C.; Werner, H.-J.: Coupled Cluster Theory for High Spin, Open Shell

Reference Wave Functions J. Chem. Phys. 1993, 99, 5219-5228. 35 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

74

Hoeft, J.; Lovas, F. J.; Tiemann, E; Torring, T. Microwave Spectrum of BaO, Z. Naturforsch.

A 1970, 25, 1750-1751. 75

Wharton, L.; Klemperer, W. Microwave spectrum of BaO. J. Chem. Phys., 1963, 38, 2705

76

Ruzlewicz, Ch.; Schütze-Pahlmann, H. U.; Hoeft, J.; Törring, T. Rotational Spectrum and

Hyperfine Structure of the 2Σ Radicals BaF and BaCl. Chem. Phys. 1982, 71, 389-399. 77

Blom, C. E.; Hedderich, H. G.; Lovas, F. J.; Suenram, R. D. Infrared and Microwave Spectra

of SrO and BaO. J. Mol. Spectrosc. 1992, 152, 109-118. 78

Hocking, W. H.; Pearson, E. F.; Creswell, F. A.; Winnewisser, G. Millimeter Wave Spectra of

the Alkaline Earth Metal Oxides: BaO, SrO, and CaO. J. Chem. Phys. 1978, 68, 1128-1134. 79

Rytlewicz, Ch.; Tijrring, T. Formation and Microwave Spectrum of the 2Σ-radical Barium-

Monofluoride. Chem. Phys. 1980, 51, 329-334. 80

Ault, B.S.; Andrews, L., Nitrogen Matrix Reactions of Alkaline Earth Metal Atoms with

Ozone: Infrared Spectra of the Alkaline Earth Metal Oxide Molecules. J. Chem. Phys. 1975, 62, 2320-2327. 81

E. Tiemann, M. Bojaschewsky, Ch. Sauter-Servaes, T. Törring, Rotationsspektrum von BaO.

Z. Naturforsch. 1974, 29a, 1692-1694. 82

Ernst, W. E.; Schröder, J. O.; Törring, T. Hyperfine Structure of SrCl X2∑+ by Microwave—

Optical Polarization Spectroscopy. Chem. Phys. Lett. 1984, 109, 175-178. 83

Mestdagh, J. M.; Visticot. J. P. Semiempirical Electrostatic Polarization Model of the Ionic

Bonding in Alkali and Alkaline Earth Hydroxides and Halides. Chem. Phys. 1991, 155, 79-89. 84

Schütze-Pahlmann, H. U.; Ryzlewicz, Ch.; Hoeft, J.; Törring, T. Millimeter Wave Spectra of

the 2Σ Radicals SrF and SrCl. Chem. Phys. Lett. 1982, 93, 74-77.

36 ACS Paragon Plus Environment

Page 36 of 41

Page 37 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

85

Huber, K.P.; Herzberg, G. Molecular Spectra and Molecular Structure. IV. Constants of

Diatomic Molecules, Van Nostrand Reinhold Co., New York, 1979. 86

Calder, V.; Mann, D. E; Seshardi, K. S.; Allavena, M.; White, D. Geometry and Vibrational

Spectra of Alkaline-Earth Dihalides. II. CaF2, SrF2, and BaF2. J. Chem. Phys. 1969, 51, 20932099. 87

Snelson, A. Inflared Spectra of Some Alkaline Earth Halides by Matrix isolation Techniques.

J. Phys. Chem. 1966, 70, 3208-3217. 88

Wharton, L.; Berg, R. A.; Klemperer, W. Geometry of Alkaline-Earth Dihalides J. Chem.

Phys. 1963, 39, 2023-2031. 89

Mann, D. E.; Calder, V.; Seshadri, S.; M.; White, D.; Linevsky, M. J. Geometry and

Vibrational Spectra of the Alkaline-Earth Dihalides. I. MgF2. J. Chem. Phys. 1967, 46, 11381143. 90

Akishin, P. A.; Spiridonov, V. P. Electron Diffraction Investigation of the Structure of Halides

of the Elements in Group II of the Periodic Table. Kristallografiya 1957, 2, 475. 91

Büchler, A.; Stauffer, J. L.; Klemperer, W. The Determination of the Geometry of High-

Temperature Species by Electric Deflection and Mass Spectrometric Detection J. Am. Chem. Soc. 1964, 86, 4544-4550. 92

Büchler, A.; Stauffer, J. L.; Klemperer, W. Geometry of the Transition-Metal Dihalides: The

Fluorides of Manganise, Cobalt, Nickel, Copper, and Zinc. J. Chem. Phys. 1964, 40, 3471-3473. 93

Hassett, D. M.; Marsden, C. J. The Influence of d Orbitals on the Shape of Monomeric CaF2.

J. Chem. Soc., Chem. Comm. 1990, 667-669.

37 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

94

Kaupp,M.; Schleyer. P. v. R.; Stoll, H.; Preuss, H. The Question of Bending of the Alkaline

Earth Dihalides MX2 (M = Be, Mg, Ca, Sr, Ba; X = F, Cl, Br, I). An Ab Initio Pseudopotential Study. J. Am. Chem. Soc., 1991, 113, 6012–6020 95

White, D.; Calder, G. V.; Hemple, S.; Mann, D. E. Geometry and Vibrational Spectra of the

Alkaline Earth Dihalides. III. MgCl2, CaCl2, SrCl2, and BaCl2. J. Chem. Phys. 1973, 59, 66456651. 96

Molnár, J. Marsden, C. J.; Hargittai, M. Molecular Structures and Force Fields of Monomeric

and Dimeric Magnesium Dichloride from Electron Diffraction and Quantum Chemical Calculations.J. Phys. Chem., 1995, 99, 9062–9071 97

Varga, G.; lanza, G.; Minichino, C.; Hargittai, M. Quasilinear Molecule par Excellence, SrCl2:

Structure from High-Temperature Gas-Phase Electron Diffraction and Quantum-Chemical Calculations—Computed Structures of SrCl2⋅Argon Complexes. Chem. Eur. J. 2006, 12, 83458357. 98

Jarman, C.N.; Bernath, P.F. High Resolution Laser Spectroscopy of the C2Δ-X2Σ+ Transition

of CaOH and CaOD: Vibronic Coupling and the Renner-Teller Effect, J. Chem. Phys. 1992, 97, 1711-1718. 99

Beardah, M.S.; Ellis, A.M., Observation of Several New Electronic Transitions of the SrOH

Free Radical, J. Chem. Phys. 1999, 110, 11244-11254. 100

Pooley, S.J.; Beardah, M.S.; Ellis, A.M., Electronic Spectroscopy of the C-X and D-X

Transitions of BaOH, J. Electron Spectrosc. Relat. Phenom. 1998, 97, 77-88. 101

Wang, X.; Andrews, L., Infrared Spectra and Electronic Structure Calculations for the Group

2 Metal M(OH)2 Dihydroxide Molecules, J. Phys. Chem. A 2005, 109, 2782-2792.

38 ACS Paragon Plus Environment

Page 38 of 41

Page 39 of 41 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

102

Andrews, L.; Wang, X. Infrared Spectra of the Group 2 Metal Dihydroxide Molecules. Inorg.

Chem. 2005, 44, 11-13. 103

Lee, T. J.; Taylor, P. R. A Diagnostic for Determining the Quality of Single-Reference

Electron Correlation Methods. Int. J. Quantum Chem. Symp. 1989, 23, 199-207. 104

Feller, D.; Peterson, K. A.; Dixon, D. A.A survey of factors contributing to accurate

theoretical predictions of atomization energies and molecular structures J. Chem. Phys. 2008, 129, 204105-1 – 204105-32. 105

Luo, Y.-R. Comprehensive Handbook of Chemical Bond Energies, CRC Press, Taylor and

Francis Group, 2007. 106

Gurvich, L.V.; Ryabova, V.G.; Khitrov, A.N. Determination of Dissociation Energies of

Alkaline-Earth Chlorides, Bromides and Hydroxides by Flame Photometry. Faraday Symp. Chem. Soc. 1973, 8, 83-106. 107

Schofield, K.The Bond Dissociation Energies of group IIA Diatomic Oxides. Chem. Rev.

1967, 67, 707-715. 108

F. Engelke, R. K. Sander, and R. N. Zare, Crossed-Beam Chemiluminescent Studies of

Alkaline Earth Atoms with ClO2. J. Chem. Phys. 1976, 65, 1146-1155. 109

Dagdigian, P. J.; Cruse, H. W.; Schultz, A.; Zare, R. N. Product State Analysis of BaO from

the Reactions Ba + CO2 and Ba + O2. J. Chem. Phys. 1974, 61, 4450-4465. 110

Christe, K. O.; Dixon, D. A.; McLemore, D.; Wilson, W. W.; Sheehy, J. A.; Boatz, J. A. On a

Quantitative Scale for Lewis Acidity and Recent Progress in Polynitrogen Chemistry. J. Fluor. Chem. 2000, 101, 151-153. 111

Reed, A. E.; Curtiss, L. A.; Weinhold, F. Intermolecular Interactions from a Natural Bond

Orbital, Donor-Acceptor Viewpoint. Chem. Rev. 1988, 88, 899-926. 39 ACS Paragon Plus Environment

The Journal of Physical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

112

Weinhold, F.; Landis, C. R. Valency and Bonding: A Natural Bond Orbital Donor-Acceptor

Perspective, University Press: Cambridge, U.K., 2005 113

Glendening, E. D. ; Badenhoop, J. K.; Reed, A. E.; Carpenter, J. E.; . Bohmann, J. A;

Morales, C. M.; Landis, C. R.; Weinhold, F. Natural Bond Order 6.0, Theoretical Chemistry Institute, University of Wisconsin, Madison, WI, 2013. http://nbo6.chem.wisc.edu/. 114

Glendening, E. D.; Landis, C. R.; Weinhold, F. NBO 6.0: Natural Bond Orbital Analysis

Program. J. Comp. Chem. 2013, 34, 1429-1437. 115

Gole, J. L.; Siu, A. K. Q.; Hayes, E. F. Non-Empirical LCAO-MO-SCF Studies of the Group

IIA Dihalides BeF2, MgF2 and CaF2. J. Chem. Phys. 1973, 58, 857-868. 116

Gillespie, R. J.; Popelier, P. L. A. The Chemical Bond and Molecular Geometry: from Lewis

to Electron Densities. Oxford University Press, Oxford, 2001.

40 ACS Paragon Plus Environment

Page 40 of 41

Page 41 of 41

TOC Graphic BDE (kcal/mol)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry

150

M-O

130

FM-F

110

ClM-Cl HOM-OH

90 Sr

Ba

Ra

41 ACS Paragon Plus Environment