Generation of Perfluoroalkyl Acids from Aerobic Biotransformation of

Aug 1, 2016 - ... MEDA Scholarship and J. W. McConnell Memorial Fellowship. ..... Steenland , K.; Fletcher , T.; Savitz , D. A. Epidemiologic Evidence...
1 downloads 0 Views 2MB Size
Subscriber access provided by Northern Illinois University

Article

Generation of perfluoroalkyl acids from aerobic biotransformation of quaternary ammonium polyfluoroalkyl surfactants Sandra Mejia Avendaño, Sung Vo Duy, Sébastien Sauvé, and Jinxia Liu Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.6b00140 • Publication Date (Web): 01 Aug 2016 Downloaded from http://pubs.acs.org on August 1, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 38

Environmental Science & Technology

TOC/Abstract Art 169x95mm (150 x 150 DPI)

ACS Paragon Plus Environment

Environmental Science & Technology

1

Generation of perfluoroalkyl acids from aerobic

2

biotransformation of quaternary ammonium polyfluoroalkyl

3

surfactants

4

Sandra Mejia Avendañoa, Sung Vo Duyb, Sébastien Sauvéb, Jinxia Liua,*

5 6

a

Page 2 of 38

Department of Civil Engineering, McGill University, Montreal, Quebec, H3A 0C3, Canada

b

Department of Chemistry, Université de Montréal, Montreal, Quebec, H3C 3J7, Canada

7 8

*Corresponding author. Tel: +1 514 398 7938; fax: +1 514 398 7361

9

E-mail address: [email protected]

10 11 12

Page 1 of 33 ACS Paragon Plus Environment

Page 3 of 38

Environmental Science & Technology

13

Abstract

14

The aerobic biotransformation over 180 d of two cationic quaternary ammonium

15

compounds (QACs) with perfluoroalkyl chains was determined in soil microcosms and

16

biotransformation pathways were proposed. This is the first time that polyfluoroalkyl cationic

17

surfactants used in aqueous film-forming foam (AFFF) formulations were studied for their

18

environmental fate. The biotransformation of perfluorooctaneamido quaternary ammonium

19

salt (PFOAAmS) was characterized by a DT50 value (time necessary to consume half of the

20

initial mass) of 142 d and significant generation of perfluoroalkyl carboxylic acid (PFOA) at

21

a yield of 30 mol% by day 180. The biotransformation of perflurooctane sulfonamide

22

quaternary ammonium salt (PFOSAmS) was very slow with unobservable change of the

23

spiked mass; yet the generation of perflurooctane sulfonate (PFOS) at a yield 0.3 mol%

24

confirmed the biotransformation of PFOSAmS. Three novel biotransformation intermediates

25

were identified for PFOAAmS and three products including perfluorooctane sulfonamide

26

(FOSA) for PFOSAmS through high-resolution mass spectrometry (MS) analysis and t-MS2

27

fragmentation. The significantly slower PFOSAmS biotransformation is hypothesized to be

28

due to its stronger sorption to soil owing to a longer perfluoroalkyl chain and a bulkier

29

sulfonyl group, when compared to PFOAAmS. This study has demonstrated that despite

30

overall high stability of QACs and their biocide nature, the ones with perfluoroalkyl chains

31

can be substantially biotransformed into perfluoroalkyl acids in aerobic soil.

32 33

Keywords: Polyfluoroalkyl and perfluoroalkyl substances (PFAS), aqueous film-forming

34

foams (AFFF), quaternary ammonium compounds (QAC), biotransformation, soil

35

Page 2 of 33 ACS Paragon Plus Environment

Environmental Science & Technology

Page 4 of 38

36

1

Introduction

37

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) represent a major class of

38

contaminants of emerging concern (CECs) found in groundwater, surface water, soil,

39

sediment, and biota globally.1-5 Being designed to be chemically stable, PFAS species are

40

highly persistent in the environment and some species are considered potential threats to

41

human and environmental health.6, 7 In recent years, it has been recognized that practices

42

of uncontrolled releases of PFAS-based aqueous film-forming foams (AFFFs) used for

43

firefighting activities have resulted in many AFFF-impacted sites with elevated levels of

44

PFASs.

45

community, the research on AFFF contamination is still in its infancy. Consequently,

46

regulatory frameworks for managing pollution associated with AFFFs mostly do not exist.

47

Whereas the most prominent PFAS contaminant, perfluorooctane sulfonate (PFOS), is

48

listed under the Stockholm Convention on Persistent Organic Pollutants for restricted

49

production and use, numerous polyfluoroalkyl surfactants with various functionalities could

50

be present in AFFF-impacted sites. Environmental fate, behaviors, and effect of these

51

chemicals have not been sufficiently investigated.

8-10

Although there is extensive research on PFASs in the global scientific

52 53

A major challenge in characterization and management of AFFF-impacted sites is the lack

54

of information about identity and concentration of PFASs present in proprietary AFFF

55

formulations. Thus, several recent studies have focused on identifying specific PFASs in

56

major formulations using advanced mass spectrometry techniques.11-13 These studies have

57

proposed structures of a large suite of cationic, anionic, and zwitterionic PFAS surfactants

58

made by both Simon’s electrochemical fluorination (ECF) and fluorotelomerizaton

59

chemistry. It is notable that all the newly identified PFASs are polyfluoroalkyl compounds, Page 3 of 33 ACS Paragon Plus Environment

Page 5 of 38

Environmental Science & Technology

60

which have perfluoroalkyl carbon chain lengths varying from 4 to 12, and possess

61

functionalities such as sulfonyl, thioether, tertiary amine, quaternary ammonium,

62

carboxylate, sulfonate, amine oxide, betaine, etc. The extensive use of polyfluoroalkyl

63

rather than perfluoroalkyl substances in AFFFs is probably due to a variety of functions that

64

polyfluoroalkyl compounds can serve (e.g., as foaming, wetting, and dispersant agents), as

65

well as high aqueous solubility, low volatility and low acid strength.14

66 67

The identified cationic PFAS surfactants in these studies contain either tertiary amine or

68

quaternary ammonium groups. Quaternary ammonium compounds (QACs) are functioning

69

surfactants due to the presence of the permanent charge on the -NR4+ group, whereas

70

tertiary amines are only precursor materials used for synthesizing QACs.14 Therefore, it is

71

possible that the tertiary amines identified in these studies11-13 are only impurities carried

72

from synthesis processes rather than effective ingredients, or breakdown products of

73

corresponding QACs. The extensive use of PFAS-based QACs in AFFF formulations or as

74

fire suppressants is documented in many patents.15-19 Thus, the question arises: what is the

75

significance of cationic PFAS-based QACs, for which no data is available regarding

76

environmental fate and effect, in AFFF-impacted sites?

77 78

Another great challenge for characterizing and managing AFFF-impacted sites is

79

inadequate understanding of the fate of PFAS surfactants once they are released into soil,

80

surface and ground water environment. The primary environmental processes that can

81

greatly complicate site investigation include microbially mediated degradation or abiotic

82

transformation. It has been reported that despite the general persistence of PFASs, the

83

polyfluoroalkyl compounds with non-fluorinated functionalities can undergo partial microbial Page 4 of 33 ACS Paragon Plus Environment

Environmental Science & Technology

Page 6 of 38

84

transformation. Under aerobic conditions, many PFASs can be microbially degraded to a

85

complex mixture of products including perfluoroalkyl acids (PFAAs) such as PFOS and

86

perfluorooctane carboxylic acid (PFOA).20-23 Understanding biotransformation potential is

87

thus essential for performing site investigation and conducting remediation if the latter is

88

deemed necessary. Biotransformation products could have different physicochemical

89

properties, mobility, and toxicity from their parent compounds. For instance, Phillips et al.

90

demonstrated that the fluorotelomer carboxylic acids pose higher acute toxicity to aquatic

91

organisms than their parent compounds of fluorotelomer alcohols.24 Knowing key

92

biotransformation products or biomarkers could also reveal the sources of PFAAs, whether

93

they are directly from AFFF products or from natural biotransformation of other PFAS

94

surfactants.

95 96

Several AFFF components, all of which are fluorotelomer-based, have recently been

97

examined for their biotransformation potential: 6:2 fluorotelomer sulfonate (6:2 FTS),

98

fluorotelomer thioether amido sulfonates (FTAoS), and 6:2 fluorotelomer sulfonamido

99

betaine (6:2 FTAB).25,26 In contrast, no ECF-based AFFF components have been

100

investigated as of date. Harding et al. found that under aerobic conditions, FTAoS can be

101

readily biodegraded through a few intermediates to form FTSs.26 The later

102

biotransformation of FTSs produced a range of characteristic fluorotelomer products that

103

were previously identified by Wang et al., including x:2 fluorotelomer unsaturated carboxylic

104

acids, x:3 fluorotelomer carboxylic acids, and perfluoroalkyl carboxylic acids (C4 – C8).27

105

6:2 FTAB was also found to degrade aerobically in activated sludge following similar

106

pathways as demonstrated by Harding et al.26, 28 As biotransformation pathways of these

107

highly fluorinated compounds do not always follow known biotransformation pathways of Page 5 of 33 ACS Paragon Plus Environment

Page 7 of 38

Environmental Science & Technology

108

non-fluorinated compounds, analysis by high-resolution mass spectrometry was

109

indispensable in determining empirical molecular formula and structures of degradation

110

products. Previous research on the biotransformation of PFAS has demonstrated

111

differences between ECF-based compounds (non-AFFF components) and fluorotelomer

112

derivatives. In both cases the non-fluorinated moiety undergoes degradation, but

113

fluorotelomer derivatives undergo partial defluorination while ECF-based derivatives do not

114

show any degradation of the perfluoroalkyl moiety.29 For this reason, it is expected that

115

biotransformation of ECF-based AFFF surfactants will differ from previously reported

116

fluorotelomer AFFF components.

117 118

As there is no information on the transformation potential of ECF-based or cationic PFAS

119

surfactants, the present study was conducted to fill such a knowledge gap. Two such ECF-

120

based cationic surfactants were selected, which appear in several patents for their use in

121

AFFFs: perflurooctane sulfonamide quaternary ammonium salt [PFOSAmS,

122

F(CF2)8SO2NH(CH2)3N+(CH3)3] and perfluorooctaneamido quaternary ammonium salt

123

[PFOAAmS, F(CF2)7CONH(CH2)3N+(CH3)3].15-19 Both compounds differ from the previously

124

identified polyfluoroalkyl amines identified by D’Agostino and Mabury in the ammonium

125

group: the identified compounds are tertiary amines, rather than quaternary ammonium

126

salts.13 The corresponding perfluoroalkyl sulfonamide amine was also identified by Place

127

and Field, and Backe et al. in AFFF formulations.11, 12 As previously stated, the QACs are

128

the effective ingredients whereas the tertiary amine compounds are probably synthesis

129

impurity or breakdown products of QACs; therefore QACs are studied instead of the tertiary

130

amine compounds. The primary objective of the present study is to determine the aerobic

131

biotransformation potential of the PFAS-based QACs in soil microcosms, and to examine Page 6 of 33 ACS Paragon Plus Environment

Environmental Science & Technology

Page 8 of 38

132

biotransformation pathways and products. In addition, PFOSAmS and PFOAAmS mainly

133

differ in the functional group that is immediately adjacent to the perfluoroalkyl chain, being

134

sulfonyl and carbonyl groups, respectively; PFOAAmS has a C7 perfluoroalkyl chain

135

whereas PFOS has C8. Therefore, it is of the interest of the authors to examine if the two

136

cationic PFAS-based QACs have a similar potential to yield PFAAs as other negatively

137

charged PFAS surfactants, despite their differences in structure, physicochemical

138

properties and bioavailability. The knowledge generated in this study is expected to improve

139

the understanding of the environmental fate of cationic PFAS surfactants, and provide more

140

elements for a sound management in AFFF-impacted sites.

141 142

2

Materials and methods

143

2.1

144

The model cationic surfactants of perfluorooctane sulfonamido ammonium iodide

145

[PFOSAmS, CAS# 335-90-0, F(CF2)8SO2NH(CH2)3N+(CH3)3I, 98%] and

146

perfluoroctaneamido ammonium iodide [PFOAAmS, CAS# 1652-63-7,

147

F(CF2)7CONH(CH2)3N+(CH3)3I, 98%] were custom-synthesized at Beijing Surfactant

148

Institute (Beijing, China). Three polyfluoroalkyl compounds that were used for identifying

149

biotransformation products or as internal standards for quantitative chemical analysis were

150

also synthesized: perfluoroctane sulfonamidoamido amine [PFOSAm, CAS# 13417-01-1,

151

F(CF2)8SO2NH(CH2)3N(CH3)2, 96%], perfluoroctane sulfonamido amine oxide [PFOSNO,

152

CAS# 30295-51-3, F(CF2)8SO2NH(CH2)3N(CH3)2O, 97%], and perfluoroctaneamido amine

153

oxide [PFOANO, CAS# 30295-53-5, F(CF2)7CONH(CH2)3N(CH3)2O, 96%]. The synthesis

154

processes for these compounds are briefly described in the Supporting Information (SI).

Standards and Reagents

155 Page 7 of 33 ACS Paragon Plus Environment

Page 9 of 38

Environmental Science & Technology

156

A standard mixture of PFAAs (2 µg mL-1, >98% purity), which included the PFOS (linear

157

isomer) and PFOA (linear isomer) were obtained from Wellington Laboratories (Guelph,

158

Canada). Perfluorooctane sulfonamide acetate (FOSAA, 50 µg mL-1, >98% purity) was also

159

from Wellington Laboratories. Perfluorooctane sulfonamide (FOSA, 98% purity) and N-ethyl

160

perfluorooctane sulfonamide (EtFOSA, 98% purity) were purchased from Advanced

161

Technology & Industrial Co. (Hong Kong, China). The information on other chemicals and

162

reagents can be found in SI.

163 164

Test soil

165

The soil used for setting up microcosms was collected in 2014 from a non-impacted area in

166

proximity to a contaminated site (Quebec, Canada). As shown in Figure SI-1 in the SI, the

167

soil was obtained from the zone next to Rivière Chaudière, upstream of the downtown area

168

of Lac-Mégantic, where about 33,000 liters of AFFF concentrates were deployed for

169

controlling crude oil fire in a major train derailment accident in July 2013.30 The top 20 cm

170

layer was collected, sieved via a 2-mm sieve immediately after collection, and stored at 4°C

171

until use. It is a sandy loam (59.2% sand, 32.2% silt, and 8.6% clay) with 3.1% organic

172

matter (OM), pH of 5.0, CEC of 7.2 meg/100 g, 11 ppm phosphorus-P, and 64 ppm nitrate-

173

N. As the levels of 18 selected PFAS species were found in the low levels of 0.02 – 0.77

174

ng/g (listed in Table SI-1), comparable to other soils that had no known PFAS exposure

175

history,31 the soil was deemed not impacted by the AFFF deployment. Before the

176

commencement of the biotransformation experiment, part of the sieved soil was sterilized

177

through three cycles of autoclaving (60 min per cycle at 121 °C and 15 psi) with intermittent

178

incubation at ~22 °C for 24 h between autoclaving cycles. Three antibiotics

179

(chloramphenicol, kanamycin, and cycloheximide) were spiked into the soil to reach an Page 8 of 33 ACS Paragon Plus Environment

Environmental Science & Technology

180

approximate concentration of 100 mg/kg-soil to prevent the revival of microbial activity

181

during long-term incubation.21

Page 10 of 38

182 183

Soil microcosms

184

Closed test vessels were created by using 50 mL amber serum bottles fitted with crimp-

185

sealed natural rubber stoppers, so as to minimize loss of potential volatile products. Similar

186

closed systems have been previously used for evaluating biodegradability of fluorotelomer

187

alcohols. 21, 32 21, 32 21, 32 21, 32 21, 32 21, 32 Approximately 5 g soil (dry weight equivalent at 103

188

°C) was added to each vessel, adjusted to a gravimetric moisture content of 23 % (~80% of

189

water holding capacity at 1/3 bar), and was pre-incubated at ~22°C for five days. Then the

190

soil was dosed with 10 µL of a methanol stock solution of a single component (or methanol

191

only for untreated soil) to result in a starting concentration of 1 μg/g (dw). The dosed soil

192

was mixed manually using a sterile polypropylene spatula. Three treatments were prepared

193

for each model compound: (a) untreated (matrix) live soil with 10 µL methanol; (b) treated

194

live soil, and (c) treated sterile soil. A total of 30 vessels were prepared for each treatment

195

and 90 vessels for each individual compound. At every sampling point, three vessels of

196

each treatment were sacrificed for analysis.

197 198

2.2

Sampling and sample preparation

199

Sampling points were chosen to be 0, 3, 7, 14, 28, 60, 90, 120, and 180 days, and at each

200

sampling point, the whole vessels of live, sterile and matrix samples were sacrificed. The

201

concentration of headspace O2 was measured using a Quantek oxygen and carbon dioxide

202

analyzer 902D (Grafton, MA) before sampling. When the level of O2 was below 10% of

203

saturation, all remaining bottles that were to be sampled on a future date were flushed with Page 9 of 33 ACS Paragon Plus Environment

Page 11 of 38

Environmental Science & Technology

204

sterile air (filtered with 0.3 µm air filter) to re-aerate. The headspace was first sampled by

205

flushing with air through a Maxi-Clean® C18 cartridge to capture potential volatile products.

206

The cartridge was later eluted with acetonitrile, and the eluent was stored at -20°C before

207

chemical analysis. Then the bottle’s crimp cap was opened to allow whole-bottle extraction

208

and the original crimp cap was also extracted at the same time. The solvent extraction

209

method was modified from Houtz et al.,8 and validated before the commencement of

210

biotransformation experiments. Briefly, 10 mL of methanol with 0.1% NH4OH were added to

211

each bottle and the cap was re-sealed. The whole bottle was sonicated for 30 min and

212

shaken for 120 min on a horizontal shaker (240 rpm) at the ambient temperature. The

213

extract was separated from the soil by centrifugation at 1600 g, and the supernatant was

214

pipetted out. This extraction step was repeated two more times. The three extracts were

215

combined, evaporated to dryness, and reconstituted with 10 mL methanol with 0.1% acetic

216

acid and cleaned up with ENVI-Carb using the procedure developed by Powley, et al. 33

217

Extracts were stored at -20°C before chemical analysis. Recoveries of the parent

218

compounds and the quantifiable biotransformation products were found to be satisfactory in

219

a spike recovery test (Table SI-2 in the SI). Methanol or acetonitrile alone could only

220

recover no more than 40% of the dosed parent compounds (data not shown). Acetonitrile

221

with sodium hydroxide, which provided complete recovery of perfluoroalkane sulfonamido

222

derivatives from soil in our previous study,20 was deemed problematic because of possible

223

amide hydrolysis and Stevens rearrangement and therefore not used.34

224 225

2.3

Quantitative LC-MS/MS analyses

226

Quantitative analysis was performed using a Shimadzu UHPLC system coupled to an AB

227

Sciex 5500 Qtrap mass spectrometer (LC-MS/MS), working in Multiple Reaction Monitoring Page 10 of 33 ACS Paragon Plus Environment

Environmental Science & Technology

Page 12 of 38

228

(MRM) mode. Separation of PFOA, PFOS, EtFOSA, FOSA and FOSAA was achieved

229

using an Ascentis Express F5 column (2.7 µm, 100 x 2.1 mm, Sigma-Aldrich, Canada) and

230

the MS detection was under negative electrospray ionization. Separation of PFOAAmS,

231

PFOSAmS, and PFOSAm was performed with a Kinetex C18 column (2.6 µm, 50 x 3.0

232

mm, Phenomenex, USA) and ionization was achieved with both positive (for ammonium

233

salts) and negative (for amine) electrospray ionization. In both cases, a Kinetex EVO C18

234

column (5 µm, 50 x 3.1 mm, Phenomenex, USA) installed upstream of the UHPLC

235

autosampler was used as a delay column to separate the PFASs leaching from

236

polytetrafluoroethylene parts of the instrument, particularly the degasser. Immediately

237

before the chemical analysis, the extracts were spiked with internal standards at 0.4 ng/mL.

238

As no isotope-labeled standards were available for PFOAAmS, PFOSAmS, and PFOSAm,

239

structurally similar compounds PFOANO and PFOSNO were used as the internal standards

240

for PFOAAmS and PFOSAmS/PFOSAm, respectively. The details on chromatographic

241

methods, mobile phases, monitored transitions, and calibration methods can be obtained

242

from the SI.

243 244

2.4

Identification of biotransformation products

245

The soil extracts after concentration by nitrogen evaporation and the headspace extracts

246

without concentration were analyzed under full scan to determine the exact mass of

247

suspected biotransformation products. The analysis was performed on a Dionex UHPLC

248

system coupled to a Q-Exactive Orbitrap mass spectrometer working in full scan mode (R:

249

70,000 at m/z = 200) with positive and negative heated electrospray ionization.

250

Chromatographic separation was achieved with a Thermo C18 Hypersil aQ Gold column

251

(1.9 µm, 100 x 2.1 mm). For structure confirmation of proposed degradation products, soil Page 11 of 33 ACS Paragon Plus Environment

Page 13 of 38

Environmental Science & Technology

252

extracts were further analyzed in t-MS2 positive and negative ionization mode (normalized

253

collision energy, NCE = 20-70%) using the same UHPLC-MS system. Qualitative analysis

254

was based on a method previously developed by Munoz et al.35. The level of confidence in

255

the structures identified is reported following the system established by Schymanski et al.36

256 257

2.5

Determination of biotransformation kinetics

258

Single first-order (SFO) kinetics model has been preferred in the past in describing

259

biotransformation of PFAS-based compounds due to the simplicity of result interpretation.

260

The assumption is that the number of molecules of a target compound is small relative to

261

the number of degrading microorganisms. However, the SFO model cannot account for

262

complex biotransformation processes (e.g., decreasing bioavailability over time due to slow

263

sorption37; varying degradation kinetics spatially due to spatial variability of soil38) and is

264

often inadequate in capturing concentration profile over a long-term incubation. Therefore,

265

three additional kinetics models, which are used to evaluate soil degradation of pesticides

266

in EU registration,39 are adapted herein to describe the disappearance of the PFAS

267

compounds from soil. They are double first-order in parallel model (DFOP), hockey-stick

268

model (HS), and first-order multiple compartment model (FOMC).40 Further information on

269

these models is provided in the SI. It is noted that we intend to provide satisfactory

270

mathematical description of the data, rather than suggest mechanisms. The experimental

271

data were simulated using Kinetic Graphic User Interface (KinGUII) v2.1,40 which is an R-

272

based software package designed specifically for determining kinetic parameters from

273

environmental fate studies.39 Reweighted Least Squares (IRLS) method was used for data

274

simulation. DT50 values, the time it takes for 50% mass to decline, were generated in the

275

models (in the SFO model, the DT50 values are commonly referred to as half-lives). Page 12 of 33 ACS Paragon Plus Environment

Environmental Science & Technology

Page 14 of 38

276 277

2.6

Prediction of biotransformation pathways

278

The biotransformation pathways were predicted using CATALOGIC41 and EAWAG’s

279

Biodegradation/Biocatalysis Database (EAWAG-BBD)42. EAWAG-BBD Pathway prediction

280

system predicts biodegradation or biotransformation pathways based on reactions reported

281

in literature and/or present in the database. CATALOGIC is a suite developed by Oasis

282

Laboratory of Mathematical Chemistry, used for assessment of environmental fate of

283

chemicals, including biotic and abiotic transformation, bioacccumullation and ecotoxicity

284

endpoints.

285 286

3

Results and Discussion

287

3.1

288

The gradual disappearance of PFOAAmS in live soil microcosms, whereas little change in

289

concentrations occurred in sterile controls, suggested the disappearance was largely

290

attributed to soil microbial activities (Figure 1). Approximately 43.0 % of the initially dosed

291

PFOAAmS remained by the end of 180-day incubation. The concentration profile of live

292

microcosms was fitted to the four kinetics models (SFO, DFOP, HS, and FOMC) that are

293

commonly used in simulating biodegradation and biotransformation kinetics of pesticides in

294

soil.39 All four models passed the test of goodness of fit with 95% confidence level whereas

295

DFOP showed the smallest χ2 error, as detailed in the SI. DT50 value of PFOAAmS was

296

estimated to be 142 d in the DFOP model, and 127 (or half-life) in the SFO model. For other

297

known PFOA precursors reported in the literature, which are largely fluorotelomer alcohol

298

derivatives with C8 perfluoroethyl chain, their half-lives (as determined using SFO model) in

299

aerobic soils ranged from