Grinnell Company - Industrial & Engineering Chemistry (ACS

May 18, 2012 - Grinnell Company. Ind. Eng. Chem. , 1959, 51 (12), pp 77A–77A. DOI: 10.1021/i650600a755. Publication Date: December 1959. Copyright ...
0 downloads 0 Views 1MB Size
GRINNELL REPORTS ON VALVES:

THE ADVANTAGES OF

GRINNELL-SAUNDERS DIAPHRAGM VALVES IN

HIGH-VACUUM SERVICE

Dependable

performance and long service life

for vacuums down to 0.1 micron . . . with leak rates of less than 0.1 micron cubic One of the most important requirements of valves for high-vacuum service is that they must be vacuum-tight at all times during their operating cycle. D i a p h r a g m valves of the G r i n n e l l Saunders manufacture fully meet this requirement. When clamped between the flanges of the body and bonnet, the

foot/hour

Large, unimpeded valve passage

The large passage of the Grinnell valve, in the open position, offers minimum impedance to the escape of random moving molecules in pumping down to high-vacuum, thus shortening the pump-down cycle.

Rugged, nylon-reinforced diaphragms in a variety of materials

Grinnell has perfected a method of reinforcing its diaphragms with wear-resistant nylon. The result is a diaphragm that lasts longer at highvacuum. The only part of the valve subject to service wear at any time is the diaphragm — which can easily be replaced in a matter of minutes, without removing the valve body from the system. Diaphragms are available in a wide choice of materials.

In open position, valve passage is free and unimpeded

Special provisions:

Sealed bonnets are available for evacuation when required. Elastomer type diaphragms do not require evacuation of the bonnet. Valves with plastic diaphragms, used at elevated temperatures, do require evacuation of the bonnet for long diaphragm service life. Rugged, reinforced nylon diaphragm gives long-lasting life Valve provides vacuum-tight seal in closed position

diaphragm is easily made vacuum-tight down to 0.1 micron — with an in-leakage rate of less than 0.1 micron cubic foot/hour. Whether in the open, throttling or closed position, the diaphragm presents a smooth, unbroken face to the vacuum side of the chamber.

Contamination minimized

Construction of Grinnell-Saunders Diaphragm Valves provides separation of the working mechanism from the vacuum within the system. This isolation of lubricated working parts prevents contamination of the system from lubricant outgassing.

For more information

Get further facts about GrinnellSaunders Diaphragm Valves. Learn, how the d i a p h r a g m lifts high for streamline flow in either direction . . . and how the diaphragm seals firmly against the body weir for leak-tight closure. Write to: — Grinnell Company, Providence 1, Rhode Island.

Circle No. 36 on Readers' Service Card

VOL. 5 1 , NO. 12

·

DECEMBER 1959

77 A