High-Performance Hydrogen Evolution Electrocatalyst Derived from

Dec 22, 2016 - (20, 21) In this letter, we propose a template-free self-foaming strategy for the fabrication of Ni3C nanoparticles embedded in a porou...
4 downloads 3 Views 1MB Size
Subscriber access provided by Fudan University

Letter

High-Performance Hydrogen Evolution Electrocatalyst Derived from Ni3C Nanoparticles Embedded in Porous Carbon Network Hao Wang, Yingjie Cao, Guifu Zou, Qinghua Yi, Jun Guo, and Lijun Gao ACS Appl. Mater. Interfaces, Just Accepted Manuscript • Publication Date (Web): 22 Dec 2016 Downloaded from http://pubs.acs.org on December 22, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

High-Performance Hydrogen Evolution Electrocatalyst Derived from Ni3C Nanoparticles Embedded in Porous Carbon Network Hao Wang,† Yingjie Cao,† Guifu Zou,*,† Qinghua Yi,



Jun Guo,‡ and Lijun

Gao*,† †

College of Physics, Optoelectronics and Energy & Collaborative Innovation Center

of Suzhou Nano Science and Technology, Soochow University, Suzhou 215006, China. ‡

Testing and Analysis Center, Soochow University, Suzhou 215123, China.

Abstract In this letter, we report a facile self-foaming strategy to synthesize Ni3C nanoparticles embedded in porous carbon network (Ni3C@PCN) by rationally incorporating Ni precursor into carbon source. As a novel hydrogen evolution reaction (HER) catalyst, the Ni3C@PCN shows superior catalytic activity with an onset potential of -65 mV, an overpotential of 262 mV to achieve 50 mA cm-2 current density, a Tafel slope of 63.4 mV/dec and durability over 12 h in acidic media. The excellent performance of the novel 3D composite material along with its low-cost merits is suggestive of great potential for scalable electrocatalytic H2 production. Keywords: hydrogen evolution, electrocatalyst, Ni3C, carbon network, composites. Hydrogen as a future energy carrier has been intensely explored in terms of its pureness and renewability.1 Widely recognized, hydrogen production via water splitting by hydrogen evolution reaction (HER) is the most promising and sustainable approach.2,3 Noble metals (e.g. platinum) have been demonstrated to be the most 1

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

effective catalysts owing to their ultralow onset potential and high catalytic activity, however their scarcity and high cost largely hinder their scalable use.4 Thus, development of highly active and durable catalysts to replace Pt is of great importance for HER. Recently, transition metal-based materials (e.g. Mo, Co, Ni) have been intensively explored as HER catalysts,

5-8

in which Ni-based catalysts have

demonstrated to be suitable for alkaline HER owing to the favorable H intermediate adsorption.9,10 However, the HER performance of Ni-based catalysts are unsatisfactory in acidic condition due to the possible dissolution of Ni.11 Great efforts have been expended to enhance the durability of Ni-based electrocatalysts in acidic medium, for instance, through development of Ni-compounds (e.g. Ni5P4,12 Ni2P,13 Ni3S2,14 NiSe15) and alloy composites (e.g. Fe-Ni-S,16 MoxC-Ni17), however those catalysts still suffer from inferior durability in acidic solution. Most recently, Ni3C has garnered increasing attention owing to its superior catalytic activity and robust chemical stability.18 For instance, Fan et al. have developed Ni3C nanocrystals encased in graphene nanoribbons as an active and stable electrocatalyst for HER in acidic medium.19 Unfortunately, it remains a challenge to synthesize nanostructured Ni3C because the high-temperature reduction process could lead to the formation of metallic Ni or Ni/Ni3C mixture and agglomeration of nanoparticles, which would deteriorate catalytic activities.20,21 In this letter, we propose a template-free self-foaming strategy for the fabrication of Ni3C nanoparticles embedded in porous carbon network (Ni3C@PCN). As a novel HER catalyst, the Ni3C@PCN exhibits superior catalytic activity with an onset potential of -65 mV, an 2

ACS Paragon Plus Environment

Page 2 of 17

Page 3 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

overpotential of 262 mV to achieve a current density of 50 mA cm-2, and a Tafel slope of 63.4 mV/dec in 0.5 M H2SO4. The core-shell nanostructure of the carbon-protected Ni3C delivers excellent stability over 12 h. Such a high HER performance makes Ni3C@PCN a promising catalyst for scalable electrochemical H2 production. The Ni3C@PCN was prepared by controllable annealing process of citric acid monohydrate and nickel acetate tetrahydrate at 1000 oC in Ar/H2 atmosphere (see Supporting Information (SI) for detailed synthetic process). The 3D porous carbon network (PCN) can be prepared by citric acid and its morphology is described in Fig S1 in SI. Thermogravimetric analysis of citric acid clearly reveals its evolution processes (Fig. S2 in SI). During the heating process, citric acid was dehydrated and polymerized. The rapid releasing of H2O molecules leads to the formation of 3D carbon foam network. The high temperature treatment also caused some degree of graphitization in the 3D PCN. Note that the Ni3C@PCN can be obtained by rational addition of trace amount of Ni metal source. Fig. 1a shows that the Ni3C@PCN has a 3D continuous structure and it can stand on the stamen intact due to its ultra-low density nature (inset of Fig. 1a). The enlarged scanning electron microscopy (SEM) (Fig. 1b) reveals that the PCN consists of ultrathin nanoporous carbon sheets spatially stood by graphitic struts. The transmission electron microscopy (TEM) images (Fig. 1c) reveals that the ultra-small Ni3C nanoparticles are embedded in the carbon network. It can be seen from the size distribution in the inset of Fig. 1c that the diameters of the Ni3C nanoparticles varied from 4 to 16 nm with an average diameter of 10 nm (Fig. 1d). The high-resolution TEM image (Fig. 1e) reveals a lattice distance 3

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

of 0.2 nm corresponding to the (113) facet of Ni3C.19 The typical energy dispersive X-ray (EDX) spectrum of Ni3C@PCN (Fig.1f) confirms that the as-prepared material is composed of C, Ni, O elements. Based on the XPS and EDX analysis, the Ni3C@PCN is determined to be consisted of 88.5% of C, 1.1% of Ni and 10.4% of O (atomic content in inset of Fig.1f). The porous structure of the Ni3C@PCN materials was further characterized by N2 adsorption/desorption tests. As shown in Fig. 2a, the N2 adsorption-desorption isotherm curve for PCN (close to the type I) indicates that the PCN has a structure with majority of micropores. The Barrett-Joyner-Halenda (BJH) pore size distribution plots (inset of Fig. 2a) confirms the presence of micropores. It is interesting to see that the Ni3C@PCN exhibits the type IV isotherm curve with a hysteresis suggesting the existence of mesopores. The secondary larger pores (diameters >10 nm) in the Ni3C@PCN lead to a rapid N2 uptake at high pressure range (P/P0 >0.9). It is worth noting that the two samples have ultrahigh surface areas and pore volumes compared to those previous reported porous carbon materials (Table S1 in SI).22 Note that the surface area of Ni3C@PCN (2270 m2 g-1) is a little smaller than that of PCN (2830 m2 g-1), which should be attributed to the incorporation of Ni3C nanoparticles. Fig.2b shows the X-ray diffraction (XRD) patterns of PCN and Ni3C@PCN. The PCN pattern exhibits two broad peaks at 26o and 45o, which are indexed to the (002) and (100) reflections of graphite, respectively. The Ni3C@PCN pattern shows three additional peaks at 39.6o, 41.9o and 45.1o, corresponding to the (110), (006) and (113) facets of hexagonal Ni3C (JCPDS no. 72-1467).23 The Raman spectra of PCN and 4

ACS Paragon Plus Environment

Page 4 of 17

Page 5 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Ni3C@PCN (Fig.2c) both exhibit peaks at 1335 cm-1, 1606 cm-1, 2661 cm-1 and 2916 cm-1, corresponding to D band, G band, 2D band and D+G band from carbon, respectively. The results indicate the existence of defects and disorders in the two products.24 The higher value of ID/IG for Ni3C@PCN (1.36) than PCN (1.21) (Table S2 in SI) indicates that the incorporated Ni3C leads to the increases of sp3 C and surface/edge defects which is in agreement with the electron microscopy analyses. As shown in Fig.2d, the wide X-ray photoelectron spectroscopy (XPS) scans reveal the presence of C, O and Ni in Ni3C@PCN. The detailed C 1s XPS scans (Fig. S3 in SI) of Ni3C@PCN and PCN suggest similar carbon materials. The high-resolution XPS scan for the Ni region of Ni3C@PCN (inset of Fig. 2d) shows the signals at 856.9 and 862 eV corresponding to the Ni 2p3/2 levels and peaks at 874.4 and 881.3 eV belonging to Ni 2p1/2 levels.7 The binding energy of the Ni 2p3/2 is higher than that of Ni0 (~852.7 eV), which corresponds to Ni2+ in the sample.25 The as-obtained samples are evaluated as catalysts for HER in acidic media. Fig. 3a shows the polarization curves of the PCN, Ni3C@PCN, Pt/C and glassy carbon in 0.5 M H2SO4. The Pt/C catalyst has a superior HER activity with a near zero onset potential while the Ni3C@PCN exhibits a small onset potential of -65 mV. In contrast, the value for PCN (~200 mV) is much higher than that of Ni3C@PCN. To achieve current density of 20 mA cm-2, the Ni3C@PCN only needs an overpotential of 203 mV. The linear portions of the Tafel plots (Fig. 3b) can be fitted to the Tafel equation (η = b logj + a, where η is the overpotential, j is the current density, and b is the Tafel slope).26 The b values of 125, 63.4, and 34 mV/decade are obtained for PCN, 5

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 17

Ni3C@PCN and Pt/C, respectively. The b is an inherent property of the catalysts determined by the rate-determining step (RDS) (Note S1 in SI).26 That the b of Ni3C@PCN is much smaller than that of PCN can be interpreted by the change of RDS during HER processes. The Pt/C clearly follows the Tafel recombination RDS step with b of 34 mV dec-1. The b values from polarization experiments (Fig.3b) indicate that the RDS of PCN is determined by the Volmer step while that of Ni3C@PCN may be determined by the Volmer-Heyrovsky steps. Although the HER mechanism of the Ni3C@PCN is still inconclusive, the much smaller Tafel slope indicates its better kinetics of HER processes compared to that of PCN. By extrapolating the Tafel plots to j axis at overpotential of zero, the exchange current density for Ni3C@PCN is estimated to be 0.03 mA cm-2 (Fig. S4 in SI), which is much higher than that of PCN (0.011mA cm-2). Fig. 3c gives the onset potential and Tafel slope value for Ni3C@PCN together with those of previously reported non-precious-metal

HER

catalysts,

including

Ni-Mo-S

nanosheets,5

CoSe2

nanowires,6 Ni foam,7 MoS2 spheres,8 Ni-doped graphene,11 and N,S-doped graphene27. It is clear that such a good performance for Ni3C@PCN makes it one of the best HER catalysts. In addition, the Ni3C@PCN also exhibits high HER performance in basic condition with a low onset potential of ~80 mV, a Tafel slope of 149 mV/decade and an exchange current density of 0.219 mA cm-2 (Fig. S5 in SI). The inferior HER performance of PCN implies that the ultrahigh surface area is not the most important factor towards HER activity. It is confirmed by the double-layer capacitance (Cdl) measurements for Ni3C@PCN and PCN (Fig. 3d and 6

ACS Paragon Plus Environment

Page 7 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Fig. S6 in SI).28 Although Ni3C@PCN has a little smaller surface area, it has a larger Cdl (37.5 mF cm-2) compared to that of PCN (33.8 mF cm-2), which may be attributed to the higher pore volume. But the difference in Cdl values of Ni3C@PCN and PCN is insignificant, corresponding to the similar electrochemical surface areas. This suggests that the superior HER activity of Ni3C@PCN is mainly dominated by the active sites from incorporated Ni3C nanoparticles. Nevertheless, the large surface area of the structured PCN with good conductivity does benefit to the HER performance as well, which facilitates the mass transfer of ions in electrolyte. Long-term stability is another important criterion indicating viability of the Ni3C@PCN. As shown in Fig. 3e, the polarization curves after 1000 cyclic voltammograms (CVs) show negligible loss of current density compared to the initial curve. It illustrates the excellent stability of Ni3C@PCN in both acidic and basic conditions. The Ni3C nanoparticles embedded in the PCN can probably be protected by surround carbon from corrosion in the solution.19 The morphology of Ni3C@PCN after the continuous HER operation (Fig. S7 in SI) shows little change which further confirms its endurance in the acid. Besides, the time-dependent current density curves at certain overpotential for Ni3C@PCN are shown in Fig. 3f. The curves are in typical serrate shape attributing to the alternate processes of bubble accumulation and release (Fig. S8 in SI).29 After continuous operation for more than 12 h, the current density only loses by 1 mA cm-2 (5%) in acid and 1.2 mA cm-2 (13%) in base. The inferior stability in basic condition might be resulted from the corrosion of carbon by alkaline solution.30 The good stability coupled with superior catalytic activity ensures the 7

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Ni3C@PCN being a promising candidate for electrocatalytic hydrogen production. In summary, this study proposes a template-free self-foaming strategy to synthesize Ni3C nanoparticles embedded porous carbon network. The Ni3C@PCN exhibits excellent catalytic activity in both acidic and basic solutions, which is mainly attributed to the rich active sites from Ni3C nanoparticles for electrocatalytic reactions and conductive 3D continuous structure of porous carbon network for electronic and ionic transfer. The Ni3C@PCN also demonstrates good long-term stability in acid and basic solutions. This work not only provides an efficient HER electrocatalyst but also opens up an applicable strategy to facile synthesis of nanostructured materials for electrocatalysis and beyond.

ASSOCIATED CONTENT Supporting Information Detailed synthetic procedures, SEM, TEM, TG, XPS and electrochemical analysis. This material is available free of charge via the Internet at http://pub.acs.org. AUTHOR INFORMATION Corresponding authors * E-mail: [email protected], [email protected]. Notes The authors declare no competing financial interest. ACKNOWLEDGMENTS 8

ACS Paragon Plus Environment

Page 8 of 17

Page 9 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

This work was financially supported by the Natural Science Foundation of China (U1401248), “973 Program - the National Basic Research Program of China” Special Funds for the Chief Young Scientist (2015CB358600), the Excellent Young Scholar Fund from National Natural Science Foundation of China (21422103). REFERENCES 1.

Turner, J. A. Sustainable Hydrogen Production. Science 2004, 305, 972-974.

2.

Walter, M. G.; Warren, E. L.; McKone, J. R.; Boettcher, S. W.; Mi, Q.; Santori, E.

A.; Lewis, N. S. Solar Water Splitting Cells. Chem. Rev. 2010, 110, 6446-6473. 3.

Luo, J.; Im, J.-H.; Mayer, M. T.; Schreier, M.; Nazeeruddin, M. K.; Park, N.-G.;

Tilley, S. D.; Fan, H. J.; Grätzel, M. Water Photolysis at 12.3% Efficiency via Perovskite Photovoltaics and Earth-Abundant Catalysts. Science 2014, 345, 1593-1596. 4.

Zou, X.; Zhang, Y. Noble Metal-Free Hydrogen Evolution Catalysts for Water

Splitting. Chem. Soc. Rev. 2015, 44, 5148-5180 5.

Miao, J.; Xiao, F.-X.; Yang, H. B.; Khoo, S. Y.; Chen, J.; Fan, Z.; Hsu, Y.-Y.;

Chen, H. M.; Zhang, H.; Liu, B., Hierarchical Ni-Mo-S Nanosheets on Carbon Fiber Cloth: a Flexible Electrode for Efficient Hydrogen Generation in Neutral Electrolyte. Sci. Adv. 2015, 1, e1500259. 6.

Liu, Q.; Shi, J.; Hu, J.; Asiri, A. M.; Luo, Y.; Sun, X. CoSe2 Nanowires Array as a

3D Electrode for Highly Efficient Electrochemical Hydrogen Evolution. ACS Appl. Mater. Interfaces 2015, 7, 3877-3881. 7.

Lu, J.; Xiong, T.; Zhou, W.; Yang, L.; Tang, Z.; Chen, S. Metal Nickel Foam as 9

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Efficient and Stable Electrode for Hydrogen Evolution Reaction in Acidic Electrolyte under Reasonable Overpotentials. ACS Appl. Mater. Interfaces 2016, 8, 5065-5069. 8.

Guo, B.; Yu, K.; Li, H.; Song, H.; Zhang, Y.; Lei, X.; Fu, H.; Tan, Y.; Zhu, Z.

Hollow Structured Micro/Nano MoS2 Spheres for High Electrocatalytic Activity Hydrogen Evolution Reaction. ACS Appl. Mater. Interfaces 2016, 8, 5517-5525. 9.

Subbaraman, R.; Tripkovic, D.; Chang, K.-C.; Strmcnik, D.; Paulikas, A. P.;

Hirunsit, P.; Chan, M.; Greeley, J.; Stamenkovic V.; Markovic, N. M. Trends in Activity for the Water Electrolyser Reactions on 3D M(Ni,Co,Fe,Mn) Hydr(oxy)oxide Catalysts. Nat. Mater. 2012, 11, 550-557. 10. Gong, M.; Wang, D.-Y.; Chen, C.-C.; Hwang, B.-J.; Dai, H. A Mini Review on Nickel-Based Electrocatalysts for Alkaline Hydrogen Evolution Reaction. Nano Res. 2016, 9, 28-46. 11. Qiu, H.-J.; Ito, Y.; Cong, W.; Tan, Y.; Liu, P.; Hirata, A.; Fujita, T.; Tang, Z.; Chen, M. Nanoporous Graphene with Single-Atom Nickel Dopants: an Efficient and Stable Catalyst for Electrochemical Hydrogen Production. Angew. Chem. Int. Ed. 2015, 54, 14031-14035. 12. Laursen, A.B.; Patraju, K. R.; Whitaker, M. J.; Retuerto, M.; Sarkar, T.; Yao, N.; Ramanujachary, K. V.; Greenblatt, M.; Dismukes, G. C. Nanocrystalline Ni5P4: a hydrogen evolution electrocatalyst of exceptional efficiency in both alkaline and acidic media. Energy Environ. Sci. 2015, 8, 1027-1034. 13. Popczun, E. J.; McKone, J. R.; Read, C. G.; Biacchi, A. J.; Wiltrout, A. M.; Lewis,

10

ACS Paragon Plus Environment

Page 10 of 17

Page 11 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

N. S.; Schaak, R. E. Nanostructured Nickel Phosphide as an Electrocatalyst for the Hydrogen Evolution Reaction. J. Am. Chem. Soc. 2013, 135, 9267-9270. 14. Tang, C.; Pu, Z.; Liu, Q.; Asiri, A. M.; Sun, X. NiS2 Nanosheets Array Grown on Carbon Cloth as an Efficient 3D Hydrogen Evolution Cathode. Electrochim. Acta 2015, 153, 508-514. 15. Tang, C.; Cheng, N.; Pu, Z.; Xing, Z.; Sun, X. NiSe Nanowire Film Supported on Nickel Foam: an Efficient and Stable 3D Bifunctional Electrode for Full Water Splitting. Angew. Chem. Int. Ed. 2015, 54, 9351-9355. 16. Long, X.; Li, G.; Wang, Z.; Zhu, H.; Zhang, T.; Xiao, S.; Guo, W.; Yang, S. Metallic Iron-Nickel Sulfide Ultrathin Nanosheets as a Highly Active Electrocatalyst for the Hydrogen Evolution Reaction in Acidic Media. J. Am. Chem. Soc. 2015, 137, 11900-11903. 17. Wang, S.; Wang, J.; Zhu, M.; Bao, X.; Xiao, B.; Su, D.; Li, H.; Wang, Y. Molybdenum-Carbide-Modified Nitrogen-Doped Carbon Vesicle Encapsulating Nickel Nanoparticles: a Highly Efficient, Low-Cost Catalyst for Hydrogen Evolution Reaction. J. Am. Chem. Soc. 2015, 137, 15753-15759. 18. Nandula, A.; Trinh, Q. T.; Saeys, M.; Alexandrova, A. N. Origin of Extraordinary Stability of Square-Planar Carbon Atoms in Surface Carbides of Cobalt and Nickel. Angew. Chem. Int. Ed. 2015, 54, 5312-5316. 19. Fan, X.; Peng, Z.; Ye, R.; Zhou, H.; Guo, X. M3C (M: Fe, Co, Ni) Nanocrystals Encased in Graphene Nanoribbons: an Active and Stable Bifunctional Electrocatalyst

11

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 17

for Oxygen Reduction and Hydrogen Evolution Reactions. ACS Nano 2015, 9, 7407-7418. 20. Leslie-Pelecky, D. L.; Zhang, X.; Kim, S.; Bonder, M.; Rieke, R. D. Structural Properties

of

Chemically

Synthesized

Nanostructured

Ni

and

Ni:

Ni3C

Nanocomposites. Chem. Mater. 1998, 10, 164–171. 21. Zhou, W.; Zheng, K.; He, L.; Wang, R.; Guo, L.; Chen, C.; Han, X.; Zhang, Z. Ni/Ni3C Core-Shell Nanochains and Its Magnetic Properties: One-Step Synthesis at Low Temperature. Nano Lett. 2008, 8, 1147–1152. 22. Zhang, J.; Zhao, Z.; Xia, Z.; Dai, L. A Metal-Free Bifunctional Electrocatalyst for Oxygen Reduction and Oxygen Evolution Reactions. Nat. Nanotech. 2015, 10, 444-452. 23. Qiao, L.; Zhao, W.; Qin, Y.; Swihart, M. T. Controlled Growth of a Hierarchical Nickel Carbide “Dandelion” Nanostructure. Angew. Chem. 2016, 128, 8155-8158. 24. Duan,

J.;

Chen,

S.;

Jaroniec,

M.;

Qiao,

S.

Z.

Porous

C3N4

Nanolayers@N-Graphene Films as Catalyst Electrodes for Highly Efficient Hydrogen Evolution. ACS Nano, 2015, 9, 931-940. 25. Goto, Y.; Taniguchi, K.; Omata, T.; Otsuka-Yao-Matsuo, S.; Ohashi, N.; Ueda, S.; Yoshikawa, H.; Yamashita, Y.; Oohashi, H.; Kobayashi, K. Formation of Ni3C Nanocrystals by Thermolysis of Nickel Acetylacetonate in Oleylamine:

12

ACS Paragon Plus Environment

Page 13 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Characterization Using Hard X-Ray Photoelectron Spectroscopy. Chem. Mater. 2008, 20, 4156-4160. 26. Jin, H.; Wang, J.; Su, D.; Wei, Z.; Pang, Z.; Wang, Y. In Situ Cobalt-Cobalt Oxide/N-Doped Carbon Hybrids as Superior Bifunctional Electrocatalysts for Hydrogen and Oxygen Evolution. J. Am. Chem. Soc. 2015, 137, 2688-2694. 27. Ito, Y.; Cong, W.; Fujita, T.; Tang, Z.; Chen, M. High Catalytic Activity of Nitrogen and Sulfur Co-doped Nanoporous Graphene in the Hydrogen Evolution Reaction. Angew. Chem. Int. Ed. 2015, 54, 2131-2136. 28. Conway, B. E.; Tilak, B. V. Interfacial Processes Involving Electrocatalytic Evolution and Oxidation of H2, and the Role of Chemisorbed H. Electrochim. Acta 2002, 47, 3571-3594. 29. Ma, F. X.; Wu, H. B.; Xia, B. Y.; Xu, C. Y.; Lou, X. W. Hierarchical β-Mo2C Nanotubes Organized by Ultrathin Nanosheets as a Highly Efficient Electrocatalyst for Hydrogen Production. Angew. Chem. Int. Ed. 2015, 54, 15395-15399. 30. Li, Y. H.; Liu, P. F.; Pan, L. F.; Wang, H. F.; Yang, Z. Z.; Zheng, L. R.; Hu, P.; Zhao, H. J.; Gu, L.; Yang, H. G. Local Atomic Structure Modulations Activate Metal Oxide as Electrocatalyst for Hydrogen Evolution in Acidic Water. Nat.Commun. 2015, 6, 8064.

13

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 1. SEM (a, b), TEM (c, d) and HRTEM (e) images of Ni3C@PCN. Inset of (a) is the photograph of the Ni3C@PCN standing on top of a stamen. Inset of (c) is the corresponding size distribution of Ni3C nanoparticles. (f) EDX spectrum for Ni3C@PCN and the inset table provides atomic content of elements.

14

ACS Paragon Plus Environment

Page 14 of 17

Page 15 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Figure 2. (a) N2 adsorption-desorption isotherms, (b) XRD patterns, (c) Raman spectra, and (d) XPS full scans for PCN and Ni3C@PCN. XPS scan spectra of the PCN and Ni3C@PCN. Inset of (a) is the corresponding pore size distribution curves. Inset of (d) is the high-resolution XPS of Ni 2p for Ni3C@PCN.

15

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 3. Polarization curves (a) with a scan rate of 5 mV s-1 and corresponding Tafel plots (b) in 0.5 M H2SO4 for the Ni3C@PCN, PCN and Pt/C. (c) Comparison of onset potential and Tafel slope of different HER catalysts in acidic solution. (d) Current density difference plotted against scan rates, which is obtained from Fig. S6 in SI. (e) The polarization curves for the Ni3C@PCN before and after 1000 CVs between 0.1V to -0.2 vs RHE with a scan rate of 0.1 V s-1 in acidic and basic solutions, respectively. (f) Time-dependent current density curves under η =200 mV under acidic and η=300 mV under basic conditions. 16

ACS Paragon Plus Environment

Page 16 of 17

Page 17 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Graphic for manuscript

17

ACS Paragon Plus Environment