High-Performance Lithium Metal Negative ... - ACS Publications

Nov 14, 2016 - ... Zielke , Roland Zengerle , Simon Thiele , John Banhart , and Ingo Manke ... Zhengyuan Tu , Snehashis Choudhury , Michael J. Zachman...
0 downloads 0 Views 10MB Size
Subscriber access provided by University of Idaho Library

Letter

High Performance Lithium Metal Negative Electrode with a Soft and Flowable Polymer Coating Guangyuan Zheng, Chao Wang, Allen Pei, Jeffrey Lopez, Feifei Shi, Zheng Chen, Austin D Sendek, HyunWook Lee, Zhenda Lu, Holger Schneider, Marina M. Safont-Sempere, Steven Chu, Zhenan Bao, and Yi Cui ACS Energy Lett., Just Accepted Manuscript • Publication Date (Web): 14 Nov 2016 Downloaded from http://pubs.acs.org on November 14, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Energy Letters is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 20

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

High Performance Lithium Metal Negative Electrode with a Soft and Flowable Polymer Coating Guangyuan Zheng1#†, Chao Wang2#, Allen Pei1#, Jeffrey Lopez2#, Feifei Shi1, Zheng Chen2‡, Austin D. Sendek3, Hyun-Wook Lee1§, Zhenda Lu1Δ, Holger Schneider5, Marina M. Safont-Sempere5, Steven Chu4, Zhenan Bao2*, Yi Cui1,6* 1

2

Department of Materials Science and Engineering,

Department of Chemical

Engineering, 3Department of Applied Physics, and 4Department of Physics, Stanford University, California, 94305, United States. 5BASF SE, Ludwigshafen 67056, Germany. 6

Stanford Institute for Materials and Energy Sciences, SLAC National Accelerator

Laboratory, Menlo Park, California 94025, USA Abstract The future development of low cost, high performance electric vehicles depends on the success of next-generation lithium-ion batteries with higher energy density. The lithium metal negative electrode is key to applying these new battery technologies. However, the problems of lithium dendrite growth and low coulombic efficiency have proven to be difficult challenges to overcome. Fundamentally, these two issues stem from the instability of the solid electrolyte interphase (SEI) layer, which is easily damaged by the large volumetric changes during battery cycling. In this work, we show that by applying a highly viscoelastic polymer to the lithium metal electrode, the morphology of the lithium deposition became significantly more uniform. At a high current density of 5 mA/cm2 we obtained a flat and dense lithium metal layer, and we observed stable cycling Coulombic efficiency of ~97% maintained for more than 180 cycles at a current density of 1 mA/cm2. TOC GRAPHIC





ACS Paragon Plus Environment

1

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 20

Improved battery technology is critical for the implementation of low cost electric vehicles (EVs), which currently use batteries with a cost of around $400/kWh at the pack level.1 To lower this cost and make EVs competitive with internal combustion engine vehicles, it is necessary to develop new electrode materials with high capacity and low cost such as lithium (Li) metal and silicon negative electrodes as well as sulfur and air positive electrodes.2-7 Specifically, the Li metal negative electrode is a promising candidate for next-generation high-energy-density batteries because it has the highest theoretical specific capacity (3860 mAh/g) and the lowest potential of any negative electrode material for Li-based batteries.8 Successful application of Li metal electrodes will fundamentally enable many advanced battery technologies (Li-S and Li-Air) that can potentially offer 5-10 times higher specific energy as compared to today’s best lithium ion batteries and help reduce battery cost to meet the DOE target of