Subscriber access provided by UNIV OF SOUTHERN QUEENSLAND
Functional Nanostructured Materials (including low-D carbon)
High-Sensitive Detection of Iron (III) by Dopamine-Modified Funnel-Shaped Nanochannel Bo Niu, Kai Xiao, Xiaodong Huang, Zhen Zhang, Xiang-Yu Kong, Ziqi Wang, Liping Wen, and Lei Jiang ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.8b05686 • Publication Date (Web): 11 Jun 2018 Downloaded from http://pubs.acs.org on June 11, 2018
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
1
High-Sensitive Detection of Iron (III) by
2
Dopamine-Modified Funnel-Shaped Nanochannel
3
Bo Niu1,2,†, Kai Xiao1,†, Xiaodong Huang1, Zhen Zhang1, Xiang-Yu Kong1,*, Ziqi Wang1,
4
Liping Wen1,2,* and Lei Jiang1,2
5
1
6
and Chemistry, Chinese Academy of Sciences, Beijing 100190, P. R. China.
7
2
8
R. China
9
*
Key Laboratory of Bio-inspired Materials and Interfacial Science, Technical Institute of Physics
School of Future Technology, University of Chinese Academy of Sciences, Beijing 100049, P.
Corresponding Author
10
E-mail:
[email protected];
[email protected] 11
†
12
Keywords: funnel-shaped nanochannels, dopamine, FeIII sensor, EDTA-2Na, switchability
These authors contributed equally to this work.
13 14 15 16 17 18
ACS Paragon Plus Environment
1
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
19
Page 2 of 27
Abstract
20
Iron as an essential trace element in human body participates in various biological processes.
21
The demand for efficient and sensitive detection of FeIII has drawn wide attentions. Inspired by
22
biological nanochannels, a high-sensitive, economic and recyclable FeIII detection method is
23
proposed by using dopamine-modified funnel-shaped nanochannels. Along with the FeIII
24
concentration changing, different FeIII-dopamine (FeIII-DOPA) chelates are generated in the
25
channel, which affect the wettability and charge distribution of the pore surface, resulting in the
26
changing of ionic current through the nanochannels. Meanwhile, the funnel-shaped nanochannel
27
applied in this work with a narrow cylindrical segment (diameter close to 10 nm) as the critical
28
section can enhance the sensing ability to ultra-trance level (down to 10-12 M). We expound the
29
mechanism and feasibility of this method, and anticipate the system can be a good example to
30
design highly sensitive and stable ion detection devices.
31 32 33 34 35 36 37 38 39 40
ACS Paragon Plus Environment
2
Page 3 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
41
ACS Applied Materials & Interfaces
Introduction
42
FeIII is a biological important metal ion and plays essential roles in synthesizing a series of
43
enzymes involved in oxygen uptake, oxygen metabolism, and electron transfer.1-2 Imbalanced
44
FeIII levels affect the normal activities in living organisms severely.3-5 For example, excessive
45
FeIII in human body is poisonous, and only when the high valence FeIII uptake from the drinking
46
water and food is converted to low valence states FeII, can it be absorbed by intestinal tract. Once
47
the FeIII is over intaken, the insolubility of FeIII and the formation of toxic radicals, especially the
48
hydroxyl radical, will cause severe disease. Therefore, regular circulation of FeIII has become an
49
important indicator of human health status, which makes it particularly necessary to demonstrate
50
the further research of FeIII detection technology.6 Currently, some methods involved in the
51
detection of FeIII have been implemented by designing fluorescent probes7-9, functionalizing
52
doped carbon nanomaterials10-12 and graphene quantum dots13-15 and synthesising of metal-
53
organic-frameworks16-18, etc. Those methods have realized the sensitive detection of FeIII, and
54
some of them exhibited specific recognition. However, these technologies are always costly or
55
have limited detection limits, which restrict their further applications. Recently, we and other
56
groups reported that functionalized nanochannels could be used as a new platform to realize
57
various ions detection.19-22 Despite the simply structure, the sensing devices based on the
58
biomimetic nanochannels have achieved the highly specific recognition and ultrasensitive
59
detection.23-25 The fabricated nanochannels exhibit excellent characteristics such as controlled
60
shape and pore size, good stability, and ease of incorporation with other devices.26-27 These
61
excellent properties make bionic nanochannels be a potential substitute for biological channels.
62
To date, the main research focused on the design of the different shapes and the modification of
63
functional molecules in the nanochannels. In detail, various solid-state nanochannels with
ACS Paragon Plus Environment
3
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 4 of 27
64
different morphology including symmetrical shapes, such as cylindrical,28 hourglass-shaped,29
65
cigar-shaped30 nanochannels and asymmetric shapes, such as conical,31 bullet-shaped32 and
66
funnel-shaped33 nanochannels have received extensive attention. Among all the different shapes
67
of nanochannels, the funnel-shaped nanochannel which possess a straight cylindrical segment as
68
the critical section, has dramatically improved the controllability and the stability in ion
69
transport.33 Based on this, a series of experiments to verify the special characteristics of funnel-
70
shaped nanochannel has been carried out recently.34-35
71
In this work, we report the dopamine-modified funnel-shaped nanochannels that can realize
72
recyclable ultra-trace FeIII ions detection. As shown in Figure 1a, the DOPA modification can be
73
accomplished by one step coupling reaction between the amino in DOPA and the carboxyl
74
groups in the inner surface of the channel, which could be confirmed by X-ray photoelectron
75
spectrum and contact angle measurement (Figure S1&S2, supporting information). Then,
76
different FeIII-DOPA chelates were generated along with the ratio of DOPA and FeIII.36 At last,
77
by adding disodium ethylenediaminetetra-acetate (EDTA-2Na), the FeIII-DOPA chelates were
78
destroyed and FeIII was removed from the channel because the binding capacity of FeIII to
79
EDTA-2Na was stronger than that of FeIII with DOPA (Figure 1 iv, v).37 Based on this, such a
80
system can clearly realize the recyclable FeIII ions detection. This particular funnel-shaped
81
nanochannel used in this work was shown in Figure 1b, which had two different segments: the
82
conical section with ~7.5 µm length and the cylindrical section with ~4.5 µm length. The
83
lengthened straight critical section with diameter of ~10 nm was benefit to improve the
84
sensitivity of ion identification.
ACS Paragon Plus Environment
4
Page 5 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
85 86
Figure 1. (a) The schematic description of the FeIII activated ionic nanochannel and the inner
87
surface of the funnel-shaped nanochannels at different states: the unmodified state after etching
88
(i); DOPA modified (ii); cross-linked chelate after FeIII response with excess DOPA (iii); cross-
89
linked chelate after equal FeIII response with DOPA (iv); and the EDTA-2Na treatment (v). (b)
90
The cross-section SEM images of a single funnel-shaped PET nanochannel with conical segment
91
and cylindrical section.
92
Results and Discussion
93
The current-voltage (I-V) as a current value measurement is extensively applied in verifying
94
the properties of the fabricated nanochannel including the charge distribution and wettability of
95
the inner surface, even calculating the channel (pore) radius.38-39 As shown in Figure 2, the I-V
96
curves provide direct signals to demonstrate the successful modification of DOPA. In particular,
97
each step of reaction was monitored by measuring I-V in 0.1 M KCl. The DOPA modified
ACS Paragon Plus Environment
5
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 6 of 27
98
funnel-shaped nanochannel showed different behaviours under different pH. As shown in Figure
99
2a, when the pH value was 3, the unmodified nanochannel showed symmetric ion transportation
100
properties. The ion current value (absolute value) at ± 2V was almost the same (2.4 nA at 2 V; -
101
2.5 nA at -2 V), which indicated there was no rectification (the rectification was defined as the
102
ratio of absolute current at given negative voltage and the current value at corresponding positive
103
voltage). After the nanochannels were modified with DOPA, the current at positive voltage
104
increased intensively, and the rectification occurred, which were attributed to the protonation of
105
the hydroxyl groups. The I-V curves decreased to the unmodified level after immersing the
106
DOPA-modified nanochannels in 20 mM FeCl3 solution for 2 h. This phenomenon was
107
contributed to the less surface charge, which was caused by the FeIII locating in the centre of the
108
chelates and the hydrophilic hydroxyl group decreased remarkably during the reaction. In
109
addition, the contact angle measurement showed a more hydrophobic surface after adding FeIII,
110
which confirmed the chelating process. (more information see Figure S2). As shown in Figure
111
2b, under pH 7, the DOPA modified nanochannel showed negative surface charges due to the
112
carboxyl formed in the etching process. After the responded to FeIII, the ion currents decreased
113
further, to about -8.2 nA under -2 V and about 3.4 nA under +2 V. For the different states:
114
unmodified, DOPA modified and DOPA-FeIII modified, the corresponding ion current values at -
115
2 V were -45.2 nA, -22.3 nA and -8.4 nA, respectively. The values showed a decreasing trend,
116
which was mainly due to the reduction of the surface negative charge and the decrease of
117
wettability.
ACS Paragon Plus Environment
6
Page 7 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
118 119
Figure 2. (a) The I-V curves of the nanochannels before (black), after (navy) DOPA
120
modification and FeIII response (dark cyan) in pH 3, 0.1 mol L-1 KCl solution and the scheme of
121
DOPA modified funnel-shaped single nanochannel under pH 3. (b) The I-V curves of the
122
nanochannels before (black), after (navy) DOPA modification and FeIII response (dark cyan) in
123
0.1 mol L-1 of KCl solution pH 7 and the scheme of DOPA modified funnel-shaped single
124
nanochannel under pH 7.
125
As shown in Figure 2, the I-V curves of dopamine modified nanochannel had a response of pH.
126
At pH 3 and 7, the nanochannel showed opposite rectification, which indicated the charge in the
127
nanochannel realized a reversion from positive to negative. Based on the reversion of the charge,
128
there would be an “isoelectric” point between pH 3&7. Therefore, we carried out the experiment
129
of different pH to find out the “isoelectric” point. As shown in Table 1, we chose 7 points of
ACS Paragon Plus Environment
7
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 8 of 27
130
different pH values from 2.60 to 5.63. The rectification ratios calculated by I+2V/I-2V showed
131
remarkable decrease as the pH increased from 2.60 to 4.99. It was worth mentioning that the
132
rectification ratio decreased to 1.00 when the pH values were close to 4.99. As the pH continued
133
to increase to 5.63, the rectification ratio (calculated by |I+2V/I-2V|) gradually increased from 1.05
134
to 3.56. In order to clearly describe the “isoelectric” point, the I-V curves and the distribution of
135
rectification ratios along with the pH were presented in Figure 3. As shown in Figure 3a, the I-V
136
curves of the DOPA-modified nanochannel at pH 2.60, 4.99 and 5.63 exhibited three different
137
curves. When the pH was 2.60, the nanochannel was positively charged, thus, the I-V curve
138
showed promoted ion current at positive voltage. While the pH was increased to 5.63, the
139
nanochannel was negatively charged and the I-V curve showed restricted ion current at positive
140
voltage. More noteworthy, the I-V curve in Figure 3a was a “symmetrical line” at positive and
141
negative voltage when the pH was 4.99 (dark cyan). As described above, the “isoelectric” point
142
meant the charge in the nanochannel was balanced, thus, the rectification ratio was closed to 1.
143
As shown in Figure 3b, When the pH was at 4.85 and 4.99, the rectification ratio fell on the line
144
of x = ± 1. (The algorithm |I-2V/I+2V| and I+2V/I-2V made the points fall around the edge of the
145
light blue area of Rec = ± 1) The zwitterionic nature of dopamine led to the rectification reversal
146
below and above the isoelectric point (pH=4.9).
147
Table 1. The ion current values at ± 2V under different pH conditions and the rectification ratios
148
calculated by| |I-2V/I+2V| (I+2V/I-2V).
pH I-2V /A× ×10-8 I+2V/A× ×10-8 R(I+2V/I-2V) R(| |I-2V/I+2V|)
2.60 -3.95 57.86 -14.66 /
3.62 -3.02 29.54 -9.78 /
4.63 -6.10 12.00 -1.97 /
4.85 -10.54 10.96 -0.96 1.04
4.99 -4.15 4.38 -0.95 1.05
5.23 -3.94 2.49 / 1.58
5.63 -14.65 4.12 / 3.56
149
ACS Paragon Plus Environment
8
Page 9 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
150 151
Figure 3. (a) The I-V curves of the DOPA-modified nanochannel under different pH values (3.62,
152
4.99 and 5.63). (b) Rectification ratio (Rec) as a function of pH.
153
To clearly figure out the detailed mechanism of the reaction between the DOPA and FeIII, the
154
experiment between different concentration FeCl3 solutions and quantitative DOPA was carried
155
out. In general, metal complexes, especially the chelates, show characteristic intense colours and
156
the colour changes with different metal concentrations.40-41As shown in Figure 4, the specific
157
FeIII responding process was characterized through the colour change in solution. At first, the
158
DOPA dissolved in water was colourless. With the continuous addition of FeCl3, the colour of
159
the solution gradually deepened to dark green. After adding EDTA-2Na, the dark green solution
160
turned back to colourless again. The colour changes were caused by the complicated reaction
161
between DOPA and FeIII. In detail, one FeIII may bind more than one DOPA molecule. The
162
bonding reaction happens between the two functional groups (phenolic hydroxyl) and FeIII
163
(Figure S3). When the FeIII was added into the DOPA overdosed solution, a cross-linked
164
complex [Fe(DOPA)3] with FeIII : DOPA= 3 : 1 was formed, along with the continuously adding
ACS Paragon Plus Environment
9
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 10 of 27
165
FeCl3 ,the complex Fe(DOPA) with FeIII : DOPA= 1 : 1 was formed.36,42 The different structures
166
of the chelates exhibited different colours in the solution.43
167
Figure 4. Schematic illustration of colour change of the DOPA solution mixed in different
168
concentration of FeIII, from which we can obtain the probably products of the different ratio of
169
DOPA and FeIII. Moreover, the addition of EDTA-2Na removing the color in the vials directly
170
demonstrates that the bond force of EDTA-2Na with FeIII is stronger than that of DOPA with
171
FeIII.
172
Meanwhile, UV-vis absorption spectra of different ratio of FeIII and DOPA in solvent were
173
collected. As expected, the UV-vis absorption spectra of DOPA and FeIII at different ratios
174
provided detailed mechanism of FeIII reacting with DOPA (Figure 5). DOPA solution (20 mM)
175
exhibited one broad absorption band ranging from 250 to 320 nm with a maximum located at
176
λmax=280 nm, which resulted from the two phenolic hydroxyl.44 Then, the UV-vis absorption
ACS Paragon Plus Environment
10
Page 11 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
177
intensity of DOPA was enhanced gradually with increasing FeIII concentrations. In particular, the
178
absorption peak of the hydroxyl group could be measured when no FeIII was added or the ratio of
179
DOPA to FeIII was less than 1:2. With the increasing of FeIII ions, the amount of functional group
180
(phenolic hydroxyl) decreased significantly, thus, the characteristic absorption peak gradually
181
disappeared. (the light blue section overlaid between the λ=260 & 305 nm clearly showed the
182
change of the absorption peak)
183
Figure 5. The UV-vis absorption spectrum (λ=200 nm~500 nm) by fresh 20 mM DOPA (keep
184
away from light, 0.1 M Tris-HCl buffer) and FeCl3 solution at different ratio.
185
As mentioned above, different chelates can be formed with altering ratio between DOPA and
186
FeIII. As shown in Figure 6a, the DOPA-modified nanochannels can even response to FeIII ions at
187
the ultralow concentration (0.01 nM), which proved that the DOPA-modified nanochannel was
188
extremely sensitive to FeIII ions. The I-V curves of full FeIII concentration from 0.001 nM to 100
189
nM can be seen in the Figure S4. The ion current increased from -163.3 nA to -46.4 nA gradually
190
along with the increase of FeIII concentration. When the concentration of FeIII reached to 1 nM,
ACS Paragon Plus Environment
11
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 12 of 27
191
the ionic current possessed a maximum value of -46.4 nA at -2 V. The trend of the ion current
192
was indicated on the side of the I-V curves in Figure 6a. With the further increase of FeIII
193
concentration, the ionic current had a tendency to decrease from -46.4 nA to -143.2 nA at -2 V
194
and increase from 11.4 nA to 23.7 nA at +2 V (Figure 6a, b). A schematic presentation for this
195
phenomenon was shown in Figure 6c (i, ii, iii, iv). The three schemes in Figure 6c (ii, iii and iv)
196
correspond to the three vertices in Figure 6b, respectively. As shown on the simulated nanopore
197
surface, the charge distribution and the wettability of the nanochannels have a significate impact
198
on the ion transport. Figure 6c (i) showed the state of the DOPA modified nanochannels. When
199
the FeIII concentrations was low (10-3 nM), the nanochannel was partially negative charged
200
because not all hydroxyl can combine with FeIII ions (Figure 6c ii). Along with the increasing of
201
FeIII concentration to 1 nM, the chelates can be formed between three DOPA molecules and one
202
FeIII ion. Under this condition, the nanochannel was electronic neutral and low hydrophilicity
203
(Figure 6c iii). With the further increase of FeIII to 100 nM, the complex DOPA-FeIII chelates
204
can be formed between one DOPA molecular and one FeIII ion. Under this condition, the pore
205
surface was negatively charged due to the free negative hydroxyl bonding to FeIII.45 The change
206
of the surface charge density and the wettability were the essential reason for the changing of
207
current values.
ACS Paragon Plus Environment
12
Page 13 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
208 209
Figure 6. FeIII response to DOPA-modified funnel-shaped nanochannels. (a)The I-V curves of
210
the DOPA-modified nanochannel with increasing FeIII concentration. (b) With the increasing
211
FeIII concentration, the change trend of current was observed at -2 V and +2 V. (c) Schematic
212
illustrations of the wettability and charge distribution changes in the nanochannel.
213
To clearly figure out whether the sensitivity of the FeIII detection by funnel-shaped bioinspired
214
nanochannel is based on the enhanced critical section, we fabricated the widely studied conical-
215
shaped nanochannels, which possess a tip point not a cylinder as the critical section. The DOPA-
216
modified conical-shape nanochannel was used as a control experiment. As shown in Figure 7a,
217
when the concentration of FeIII was 0.01 nM, the I-V curve coincided with the DOPA-modified I-
ACS Paragon Plus Environment
13
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 14 of 27
218
V curve. That’s to say, the conical-shaped nanochannel cannot recognize the ultralow level FeIII
219
(Table.S1). Hereafter, we increased the concentration of FeIII to 10 nM, the ions current value
220
experienced a slight fluctuation: from -22.7 nA to 25.4 nA. With the further increasing of the
221
FeIII concentration, the ions current value at ± 2 V tended to be stable (Figure 7b). Normally, the
222
nanochannels with small ion current values were more sensitive. The conical nanochannel was
223
etched with smaller pore size in this experiment (Figure S5). However, the response to FeIII had
224
obvious weakness compared with the funnel-shaped nanochannel, which provided strong
225
evidence that the ultra-sensitive detection ability did come from the function of the extended
226
critical section.
227 228
Figure 7. FeIII response in DOPA-modified conical-shaped nanochannels. (a)The I-V curves of
229
the DOPA-modified conical-shaped nanochannels with increasing FeIII concentration. (b) With
230
the increasing FeIII concentration, the change trend of ion current was observed at ± 2 V.
231
ACS Paragon Plus Environment
14
Page 15 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
232
Table 2. Methods involved in the sensitive detection of FeIII by different technology in recently
233
years. Materials (Methods)
LOD (M)
Reference
Luminescent Cd(II)–Organic Frameworks with Chelating NH2 Sites
2.7×10-6
[18]
Fluorescent Boron Nitride Quantum Dots
3.0×10-7
[8]
Zr(IV)-Based Metal−Organic Frameworks
2.8×10-7
[17]
Dendrimer-Based Electropolymerized Microporous Film
8.5×10-8
[47]
Rhodamine-Functionalized Graphene Quantum Dots
2.0×10-8
[13]
Luminescent N,S Co-doped Graphene Quantum dots
8.0×10-9
[15]
Nitrogen and Phosphorus Co-Doped Carbon Nanodots
1.8×10-9
[12]
Ligninsulfonate/graphene Quantum Dots Composites
5.0×10-10
[14]
Fluorescent Organic Nanoparticles
1.0×10-10
[7]
π-Plasmon Absorption of Carbon Nanotubes
1.0×10-11
[11]
234 235
With an extended cylindrical segment, the funnel-shaped nanochannel achieved ultra-sensitive
236
detection of FeIII. Previously, many works involved in the sensitive detection of FeIII were
237
reported. Among them, the synthesis fluorescent probes are thoroughly discussed and
238
comprehensive applied in FeIII detection. Besides the fluorescent probes, the new methods such
239
as MOFs, Films46, carbon nanotubes, graphene quantum dots and so on, have gradually
240
developed. As shown in Table 2, we summarized the articles published in the past two years on
241
the detection of iron ions. The different methods, materials and limits of detection are listed in
242
the table. Compare to the system in this article, the simple structure is one of its major
243
advantages. Unlike the artificial bioinspired nanochannels, the complex process and expensive
244
cost of sensitive probes or carbon materials make the FeIII detection technology cannot be
ACS Paragon Plus Environment
15
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 16 of 27
245
promoted. Thus, the funnel-shaped nanochannels modified with functionalized molecule will
246
find application in the ultra-sensitive ion detection.
247
Figure 8. Stability and repeatability of the FeIII activated ionic nanochannel. (a) The reversible
248
ionic currents before and after removing of FeIII by adding EDTA-2Na. (b) Stability and
249
responsive switchability of the DOPA-modified nanochannels at -2 V.
250
FeIII activated ionic nanochannel also exhibited good stability and responsive switchability,
251
which could be demonstrated by the addition and removal of FeIII. Figure 8a showed the I-V
252
curves of the DOPA-modified nanochannels before and after immersing in solution and then
253
treated with EDTA-2Na respectively. By immersing in FeCl3, the nanochannel changed from “on”
254
(relatively high ion current value: -38.1 nA at -2 V) state to “off” (ion transport was restricted
255
and showed low ion current value: -6.2 nA at -2 V) state. When EDTA-2Na was added into the
256
system, the I-V curve returned to the “on” state. As the binding capacity of EDTA-2Na to FeIII
257
was stronger than that of DOPA with FeIII, EDTA-2Na could take FeIII from DOPA-FeIII cross-
258
linked chelates47 and the ionic current recovered to the initial DOPA-modified state. As shown in
259
the Figure 8b, ON/OFF states switched upon alternating introduction of DOPA and EDTA-2Na,
ACS Paragon Plus Environment
16
Page 17 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
260
and no damping of the ionic current was observed after several cycles, which reflected the high
261
reversibility and repeatability of the system.
262
Conclusion
263
In summary, an ultra-low concentration of FeIII detection method was successfully realized by
264
immobilizing DOPA in funnel-shaped nanochannels. Owing to the special structure, the funnel-
265
shaped nanochannel combining with functional molecule provided a new platform to detect trace
266
amounts of FeIII ions. Specifically, this system can directly realize the ultra-trance FeIII detection
267
with concentration of 10-3 nM. Furthermore, with the excellent stability and switchability of the
268
funnel-shaped nanochannels, our proposed platform may have potential applications in high
269
sensitively ion detection fields, such as biological toxicity examination and water quality
270
monitoring.
271
Experimental Section
272
Materials: The reagents used in this experiment were all analytically grade. NaOH, KCl,
273
HCOOH,
N-(3-Dimethylaminopropyl)-N-ethylcarbodiimide
hydrochloride
(EDC),
N-
274
Hydroxysul fosuccinimide sodium salt (NHS), DOPA, Tris-HCl, FeCl3, EDTA-2Na were
275
purchased from Sinopharm Chemical Reagent Beijing Co., Ltd. (SCRC, China) and J&K Beijing
276
Co., Ltd. Poly(ethylene terephthalate) (PET) membranes (thickness of 12 um) (HostaphanRN12,
277
Hoechst, density of 106 cm-2) were irradiated at the linear accelerator UNILAC (GSI, Darmstadt)
278
with swift heavy ions (Au) which have an energy of 11.4 MeV per nucleon. The fabrication of
279
nanochannels in the PET membrane was accomplished by asymmetric etching of the damage
280
trails which were coursed by the heavy ions (Au, Bi or U) passing through the membrane. Before
ACS Paragon Plus Environment
17
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 18 of 27
281
the chemical etching process, the PET films were exposed to UV light (365 nm, 20 W) for 1 h
282
from each side to improve the etching properties.
283
Fabrication of funnel-shaped nanochannel: The funnel-shaped nanochannels were prepared
284
by an asymmetric track etching technology on a PET membrane containing 106 nanopores/cm2,
285
approximately. Concentrated NaOH has been selected as the etchant reagent for preparing bio-
286
inspired nanochannels on PET membrane. At first, the PET membrane was irradiated with single
287
swift heavy ions (Au) to obtain damage trail; then, the membranes were irradiated under UV
288
light (365 nm) for 2 h from both sides in order to make the film more conducive to etching; last,
289
start etching. The specific process were as follows: the etching (NaOH, 9 M) and the stopping
290
solution (1 M KCl and 1 M HCOOH) are added in two different sides of the reaction cell (Figure
291
S6).
292
Owing to its special construction, this process was carried out by two steps: one for conical
293
section and the other for cylinder section. The Pt electrode was used to detect the current change
294
under the voltage 1 V during the etching process. When the transmembrane ionic current
295
achieved an increasing from 10-12 A to 10-9 A, which meant several of the nanochannels opened
296
and the conical part had been presented. Remove the membrane quickly and switch to a 60 °C
297
reaction pool to continue etching. The etching (2 M NaOH) and stop solution (1 M KCl and 1 M
298
HCOOH) were both heated to 60 °C. In particular, the cylindrical portion was obtained by
299
etching on the same side. Owing to the temperature have more profound impact than the
300
concentration of the etching solution, generally, the higher temperature process lasted for 4~5
301
minutes. Wait until the ion currents reach to a certain number, then stop etching. Remove the
302
etching solution and add the stop solution to the pool quickly. It was worth noting that the NaOH
303
could not be cleaned completely, thus, washing the pool more than three times was very
ACS Paragon Plus Environment
18
Page 19 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
304
necessary. The fabrication of the funnel-shaped nanochannel would finish until the current was
305
stable. Finally, the prepared membrane was immersed in Milli-Q water (18.2 MΩ) for next step.
306
The big size pore (the radius of base side approximate to 400 nm) of the nanochannels can be
307
observed under scanning electron microscopy. The small size pore (the radius of tip side
308
approximate to 10 nm) can be observed in the profile.
309
Functionalization with DOPA: The functional molecular DOPA was immobilized on the inner
310
surface of the funnel-shaped nanochannel by chemical modification. After the ionic trail-etching,
311
a large number of carboxyl (–COOH) functional groups were produced in the inner face of the
312
funnel-shaped nanochannel. Above all, the PET membranes were activated in mixture solution (2
313
mL) consist of EDC (30 mg) and NHS (6 mg) for 1 hour. In this process, the –COOH were
314
activated into a more easily reactive group. Single DOPA molecular was modified in the
315
multiple nanochannels at acidic solution (dopamine 20 mM, 0.1 M Tris-HCl buffer, pH 5.7)
316
mainly because acidic conditions can effectively inhibit the self-polymerization of DOPA
317
molecules, so as to ensure that the modification in the pore is monomer DOPA. The modification
318
was accomplished by one step coupling reaction of the amino in DOPA and the carboxyl acid in
319
surface. Chemical modification cannot modify all of the activated carboxyl groups with DOPA
320
due to the inevitable byproduct. After modification, the membrane was washed with Milli-Q
321
water (18.2 MΩ) for more than three times.
322
Functionalized nanochannel chelating with FeIII ions: After functionalization with DOPA,
323
FeCl3 solution prepared in Tris-HCl was introduced on the both side of the funnel-shaped
324
nanochannels. The immobilization of FeIII lasted for 2h at room temperature. After that, the
325
membrane was washed three times and reserved for backup.
ACS Paragon Plus Environment
19
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 20 of 27
326
Supporting Information
327
Experimental details about the fabrication process of funnel-shaped nanochannels and the post
328
modification of DOPA. Figures about X-ray photoelectron spectroscopy of a planar PET
329
membrane, contact angle measurement, diagram of the experimental facility, I-V curves of the
330
concentration measurement, and the reaction equation between DOPA and FeIII. Table about the
331
different methods involve in the detection of Iron ions.
332
Author Contributions
333
†
334
Notes
335
The authors declare no competing financial interests.
336
Acknowledgements
337
The authors thank the Material Science Group of GSI (Darmstadt, Germany) for providing the
338
ion-irradiated samples. This work was supported by the National Key R&D Program of China
339
(2017YFA0206904, 2017YFA0206900), the National Natural Science Foundation (21625303,
340
51673206, 21434003), and the Key Research Program of the Chinese Academy of Sciences
341
(QYZDY-SSW-SLH014).
These authors contributed equally to this work.
342 343 344
ACS Paragon Plus Environment
20
Page 21 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
345
References
346
(1) Hentze, M. W.; Muckenthaler, M. U.; Galy, B.; Camaschella, C. Two to Tango: Regulation
347 348 349 350 351 352 353
of Mammalian Iron Metabolism. Cell 2010, 142, 24-38. (2) Dixon, S. J.; Stockwell, B. R. The Role of Iron and Reactive Oxygen Species in Cell Death. Nat. Chem. Biol. 2014, 10, 9-17. (3) Zecca, L.; Youdim, M. B.; Riederer, P.; Connor, J. R.; Crichton, R. R. Iron, Brain Ageing and Neurodegenerative Disorders. Nat. Rev. Neurosci. 2004, 5, 863-873. (4) Enami, S.; Sakamoto, Y.; Colussi, A. J. Fenton Chemistry at Aqueous Interfaces. Proc. Natl. Acad. Sci. U. S. A. 2014, 111, 623-628.
354
(5) Eid, R.; Arab, N. T.; Greenwood, M. T. Iron Mediated Toxicity and Programmed Cell Death:
355
a review and a Re-examination of Existing Paradigms. Biochim. Biophys. Acta BBA - Mol.
356
Cell Res. 2017, 1864, 399-430.
357
(6) Song, Y.; Zhu, C.; Song, J.; Li, H.; Du, D.; Lin, Y. Drug-Derived Bright and Color-Tunable
358
N-Doped Carbon Dots for Cell Imaging and Sensitive Detection of Fe3+ in Living Cells.
359
ACS Appl. Mater. Interfaces 2017, 9, 7399-7405.
360
(7) Yang, Y.; Wang, X.; Cui, Q.; Cao, Q.; Li, L. Self-Assembly of Fluorescent Organic
361
Nanoparticles for Iron(III) Sensing and Cellular Imaging. ACS Appl. Mater. Interfaces
362
2016, 8, 7440-7448.
363
(8) Huo, B.; Liu, B.; Chen, T.; Cui, L.; Xu, G.; Liu, M.; Liu, J. One-Step Synthesis of
364
Fluorescent Boron Nitride Quantum Dots via a Hydrothermal Strategy Using Melamine as
365
Nitrogen Source for the Detection of Ferric Ions. Langmuir 2017, 33, 10673-10678.
ACS Paragon Plus Environment
21
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
366
(9) Yao, Q.; Lu, B.; Ji, C.; Cai, Y.; Yin, M. Supramolecular Host-Guest System as Ratiometric
367
Fe(3+) Ion Sensor Based on Water-Soluble Pillar[5]arene. ACS Appl. Mater. Interfaces
368
2017, 9, 36320-36326.
369
Page 22 of 27
(10) Zhou, Z.; Shen, Y.; Li, Y.; Liu, S.; Zhang, Y. Chemical Cleavage of Layered Carbon Nitride
370
with Enhanced Photoluminescent Performances and Photoconduction. ACS Nano 2015, 9,
371
12480-12487.
372
(11) Cheung, W.; Patel, M.; Ma, Y.; Chen, Y.; Xie, Q.; Lockard, J. V.; Gao, Y.; He, H. π-
373
Plasmon Absorption of Carbon Nanotubes for the Selective and Sensitive Detection of Fe3+
374
Ions. Chem. Sci. 2016, 7, 5192-5199.
375
(12) Shi, B.; Su, Y.; Zhang, L.; Huang, M.; Liu, R.; Zhao, S. Nitrogen and Phosphorus Co-
376
Doped Carbon Nanodots as a Novel Fluorescent Probe for Highly Sensitive Detection of
377
Fe(3+) in Human Serum and Living Cells. ACS Appl. Mater. Interfaces 2016, 8, 10717-
378
10725.
379
(13) Guo, R.; Zhou, S.; Li, Y.; Li, X.; Fan, L.; Voelcker, N. H. Rhodamine-Functionalized
380
Graphene Quantum Dots for Detection of Fe(3+) in Cancer Stem Cells. ACS Appl. Mater.
381
Interfaces 2015, 7, 23958-23966.
382
(14) Xu, L.; Mao, W.; Huang, J.; Li, S.; Huang, K.; Li, M.; Xia, J.; Chen, Q. Economical, Green
383
Route to Highly Fluorescence Intensity Carbon Materials Based on
384
Ligninsulfonate/Graphene Quantum Dots Composites: Application as Excellent Fluorescent
385
Sensing Platform for Detection of Fe3+ Ions. Sens. Actuat. B: Chem. 2016, 230, 54-60.
ACS Paragon Plus Environment
22
Page 23 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
386
ACS Applied Materials & Interfaces
(15) Shen, C.; Ge, S.; Pang, Y.; Xi, F.; Liu, J.; Dong, X.; Chen, P. Facile and Scalable
387
Preparation of Highly Luminescent N,S Co-doped Graphene Quantum Dots and Their
388
Application for Parallel Detection of Multiple Metal Ions. J. Mater. Chem. B 2017, 5, 6593-
389
6600.
390
(16) Chen, D.-M.; Zhang, N.-N.; Liu, C.-S.; Du, M. Template-directed Synthesis of A
391
Luminescent Tb-MOF Material for Highly Selective Fe3+ and Al3+ Ion Detection and
392
VOC Vapor Sensing. J. Mater. Chem. C 2017, 5, 2311-2317.
393
(17) Wang, B.; Yang, Q.; Guo, C.; Sun, Y.; Xie, L. H.; Li, J. R. Stable Zr(IV)-Based Metal-
394
Organic Frameworks with Predesigned Functionalized Ligands for Highly Selective
395
Detection of Fe(III) Ions in Water. ACS Appl. Mater. Interfaces 2017, 9, 10286-10295.
396
(18) Zhao, D.; Liu, X.-H.; Zhao, Y.; Wang, P.; Liu, Y.; Azam, M.; Al-Resayes, S. I.; Lu, Y.;
397
Sun, W.-Y. Luminescent Cd(ii)–Organic Frameworks with Chelating NH2 Sites for
398
Selective Detection of Fe(iii) and Antibiotics. J. Mater. Chem. A 2017, 5, 15797-15807.
399
(19) Ali, M.; Ahmed, I.; Nasir, S.; Ramirez, P.; Niemeyer, C. M.; Mafe, S.; Ensinger, W. Ionic
400
Transport through Chemically Functionalized Hydrogen Peroxide-Sensitive Asymmetric
401
Nanopores. ACS Appl. Mater. Interfaces 2015, 7, 19541-19545.
402
(20) Zhang, H.; Hou, X.; Hou, J.; Zeng, L.; Tian, Y.; Li, L.; Jiang, L. Synthetic Asymmetric-
403
Shaped Nanodevices with Symmetric pH-Gating Characteristics. Adv. Funct. Mater. 2015,
404
25, 1102-1110.
405 406
(21) Xu, Y.; Sui, X.; Jiang, J.; Zhai, J.; Gao, L. Smooth Muscle Cell-Mimetic CO-Regulated Ion Nanochannels. Adv. Mater. 2016, 28, 10780-10785.
ACS Paragon Plus Environment
23
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
407
(22) Zhao, X. P.; Wang, S. S.; Younis, M. R.; Xia, X. H.; Wang, C. Asymmetric Nanochannel-
408
Ionchannel Hybrid for Ultrasensitive and Label-Free Detection of Copper Ions in Blood.
409
Anal. Chem. 2018, 90, 896-902.
410
Page 24 of 27
(23) Wang, J.; Hou, J.; Zhang, H.; Tian, Y.; Jiang, L. Single Nanochannel-Aptamer-Based
411
Biosensor for Ultrasensitive and Selective Cocaine Detection. ACS Appl. Mater. Interfaces
412
2018, 10, 2033-2039.
413
(24) Sun, Z.; Liao, T.; Zhang, Y.; Shu, J.; Zhang, H.; Zhang, G. J. Biomimetic Nanochannels
414
Based Biosensor for Ultrasensitive and Label-Free Detection of Nucleic Acids. Biosens.
415
Bioelectron. 2016, 86, 194-201.
416 417
(25) Singh, K. P. Ion Current Rectification Influenced by Length and Location of Surface Charge in Fluidic Unipolar Conical Nanopores. Sens. Actuat. B: Chem. 2016, 230, 493-500.
418
(26) Dekker, C. Solid-state Nanopores. Nat. Nanotechnol. 2007, 2, 209-215.
419
(27) Hou, X.; Guo, W.; Jiang, L. Biomimetic Smart Nanopores and Nanochannels. Chem. Soc.
420
Rev. 2011, 40, 2385-2401.
421
(28) Ali, M.; Ramirez, P.; Tahir, M. N.; Mafe, S.; Siwy, Z.; Neumann, R.; Tremel, W.; Ensinger,
422
W. Biomolecular Conjugation Inside Synthetic Polymer Nanopores via Glycoprotein-lectin
423
Interactions. Nanoscale 2011, 3, 1894-1903.
424
(29) Hou, X.; Yang, F.; Li, L.; Song, Y.; Jiang, L.; Zhu, D. A Biomimetic Asymmetric
425
Responsive Single Nanochannel. J. Am. Chem. Soc. 2010, 132, 11736-11742.
426 427 428 429
(30) Zhang, H.; Hou, X.; Zeng, L.; Yang, F.; Li, L.; Yan, D.; Tian, Y.; Jiang, L. Bioinspired Artificial Single Ion Pump. J. Am. Chem. Soc. 2013, 135, 16102-16110. (31) Sheng, Q.; Xie, Y.; Li, J.; Wang, X.; Xue, J. Transporting An Ionic-liquid/Water Mixture in a Conical Nanochannel: a Nanofluidic Memristor. Chem. Commun. 2017, 53, 6125-6127.
ACS Paragon Plus Environment
24
Page 25 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
430 431 432
ACS Applied Materials & Interfaces
(32) Apel, P. Y.; Blonskaya, I. V.; Orelovitch, O. L.; Ramirez, P.; Sartowska, B. A. Effect of Nanopore Geometry on Ion Current Rectification. Nanotechnology 2011, 22, 175302. (33) Xiao, K.; Xie, G.; Zhang, Z.; Kong, X. Y.; Liu, Q.; Li, P.; Wen, L.; Jiang, L. Enhanced
433
Stability and Controllability of an Ionic Diode Based on Funnel-Shaped Nanochannels with
434
an Extended Critical Region. Adv. Mater. 2016, 28, 3345-3350.
435
(34) Xiao, K.; Chen, L.; Zhang, Z.; Xie, G.; Li, P.; Kong, X. Y.; Wen, L.; Jiang, L. A Tunable
436
Ionic Diode Based on a Biomimetic Structure-Tailorable Nanochannel. Angew. Chem., Int.
437
Ed. 2017, 56, 8168-8172.
438
(35) Wu, K.; Xiao, K.; Chen, L.; Zhou, R.; Niu, B.; Zhang, Y.; Wen, L. Biomimetic Voltage-
439
Gated Ultrasensitive Potassium-Activated Nanofluidic Based on a Solid-State Nanochannel.
440
Langmuir 2017, 33, 8463-8467.
441
(36) Zeng, H.; Hwang, D., S.; Israelachvili, J., N.; Waite, J., H. Strong Reversible Fe 3+-
442
mediated Bridging between Dopa-Containing Protein Films in Water. Proc. Natl. Acad. Sci.
443
U. S. A. 2010, 107, 12850-12853.
444
(37) Kim, B. J.; Cheong, H.; Hwang, B. H.; Cha, H. J. Mussel-Inspired Protein Nanoparticles
445
Containing Iron(III)-DOPA Complexes for pH-Responsive Drug Delivery. Angew. Chem.,
446
Int. Ed. 2015, 54, 7318-7322.
447
(38) Apel, P. Y.; Korchev, Y. E.; Siwy, Z.; Spohr, R.; Yoshida, M. Diode-Like Single-Ion Track
448
Membrane Prepared by ElectroStopping. Nucl. Instrum. Methods Phys. Res., Sect. B 2001,
449
184, 337-346.
450
(39) Perez-Mitta, G.; Albesa, A. G.; Trautmann, C.; Toimil-Molares, M. E.; Azzaroni, O.
451
Bioinspired Integrated Nanosystems Based on Solid-state Nanopores: "iontronic"
452
Transduction of Biological, Chemical and Physical Stimuli. Chem. Sci. 2017, 8, 890-913.
ACS Paragon Plus Environment
25
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
453
Page 26 of 27
(40) Gogoi, N.; Barooah, M.; Majumdar, G.; Chowdhury, D. Carbon Dots Rooted Agarose
454
Hydrogel Hybrid Platform for Optical Detection and Separation of Heavy Metal Ions. ACS
455
Appl. Mater. Interfaces 2015, 7, 3058-3067.
456
(41) Liu, L.; Wang, X.; Wang, N.; Peng, T.; Wang, S. Bright, Multi-responsive, Sky-Blue
457
Platinum(II) Phosphors Based on a Tetradentate Chelating Framework. Angew. Chem., Int.
458
Ed. 2017, 56, 9160-9164.
459 460
(42) Zdybel, M.; Chodurek, E.; Pilawa, B. EPR Studies of DOPA–Melanin Complexes with Fe(III). Appl. Magn. Reson. 2010, 40, 113-123.
461
(43) Kim, B. J.; Kim, S.; Oh, D. X.; Masic, A.; Cha, H. J.; Hwang, D. S. Mussel-Inspired
462
Adhesive Protein-Based Electrospun Nanofibers Reinforced by Fe(III)–DOPA
463
Complexation. J. Mater. Chem. B 2015, 3, 112-118.
464
(44) Kim, S.; Moon, J.-M.; Choi, J. S.; Cho, W. K.; Kang, S. M. Mussel-Inspired Approach to
465
Constructing Robust Multilayered Alginate Films for Antibacterial Applications. Adv.
466
Funct. Mater. 2016, 26, 4099-4105.
467
(45) Liu, Q.; Lu, X.; Li, L.; Zhang, H.; Liu, G.; Zhong, H.; Zeng, H. Probing the Reversible
468
Fe3+-DOPA-Mediated Bridging Interaction in Mussel Foot Protein-1. J. Phys. Chem. C
469
2016, 120, 21670-21677.
470
(46) Ma, H.; Li, F.; Li, P.; Wang, H.; Zhang, M.; Zhang, G.; Baumgarten, M.; Müllen, K. A
471
Dendrimer-Based Electropolymerized Microporous Film: Multifunctional, Reversible, and
472
Highly Sensitive Fluorescent Probe. Adv. Funct. Mater. 2016, 26, 2025-2031.
473 474
(47) Kim, S.; Gim, T.; Kang, S. M. Stability-Enhanced Polydopamine Coatings on Solid Substrates by Iron (III) Coordination. Prog. Org. Coat. 2014, 77, 1336-1339.
475
ACS Paragon Plus Environment
26
Page 27 of 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
476
ACS Applied Materials & Interfaces
Table of contents
477
ACS Paragon Plus Environment
27