Hydrophilic Substrates by

Feb 7, 2017 - Department of Chemistry, Queen's University, Kingston, Ontario K7L 3N6, ... preconcentrated on the hydrophilic patches, and their fluore...
1 downloads 0 Views 2MB Size
Subscriber access provided by University of Newcastle, Australia

Article

Fabrication of Patterned Superhydrophobic/Hydrophilic Substrates by Laser Micromachining for Small Volume Deposition and Droplet-based Fluorescence Detection Kyle John Bachus, Lili Mats, Heeyoon W Choi, Graham T.T. Gibson, and Richard David Oleschuk ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.6b16363 • Publication Date (Web): 07 Feb 2017 Downloaded from http://pubs.acs.org on February 12, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Fabrication of Patterned Superhydrophobic/Hydrophilic Substrates by Laser Micromachining for Small Volume Deposition and Droplet-based Fluorescence K.J. Bachus1, L. Mats1, H.W. Choi1, G.T.T. Gibson2, and R.D. Oleschuk1* 1

Department of Chemistry, Queen’s University, Kingston, ON, K7L 3N6, Canada

[email protected] 2

CMC Microsystems, Innovation Park, Kingston, ON, K7L 0E9, Canada

Keywords: superhydrophobic materials, superhydrophobic-hydrophilic, patterned surfaces, laser micromachining, droplet microfluidics, 3D-printed microfluidics, fluorescence detection

1 ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 26

Abstract: The deposition of nanoliter and sub-nanoliter volumes is important in chemical and biochemical droplet-based microfluidic systems. There are several techniques that have been established for the deposition/generation of small volumes including the use of surfaces with patterned differences in wettability. Many such methods require complex and time-consuming lithographic techniques. Here, we present a facile method for the fabrication of superhydrophobic surfaces with patterned hydrophilic regions by laser micromachining. A comprehensive study of fabrication parameters (laser machining speed, laser power, and patch size) on the material, patch wettability, and droplet volume is presented. Patch sizes as small as 100 µm diameter and as large as 1500 µm diameter were investigated and volumes as low as 400 pL were observed. As an example application of such patterned materials and the deposition of small volumes, halide salts were pre-concentrated on the hydrophilic patches and their fluorescence quenching constants were rapidly calculated using a 3D-printed device coupled to a fluorescence spectrometer.

1. Introduction Superhydrophobic surfaces are those which have high water contact angles (>150°) and low sliding/roll-off angles (