Hydrothermal Carbonization of Autoclaved ... - ACS Publications

Jun 14, 2016 - Department of Chemical and Materials Engineering, University of Nevada, Reno, 1664 N. Virginia Street, Reno, Nevada 89557,. United Stat...
4 downloads 0 Views 34MB Size
Subscriber access provided by UNIVERSITY OF KENTUCKY

Article

Hydrothermal Carbonization of Autoclaved Municipal Solid Waste Pulp and Anaerobically Treated Pulp Digestate M. Toufiq Reza, Charles J Coronella, Kevin M. Holtman, Diana Franqui-Villanueva, and Simon R. Poulson ACS Sustainable Chem. Eng., Just Accepted Manuscript • DOI: 10.1021/ acssuschemeng.6b00160 • Publication Date (Web): 14 Jun 2016 Downloaded from http://pubs.acs.org on June 17, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Sustainable Chemistry & Engineering is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Hydrothermal Carbonization of Autoclaved Municipal Solid Waste Pulp and Anaerobically Treated Pulp Digestate M. Toufiq Reza1*, Charles Coronella2, Kevin M. Holtman3, Diana Franqui-Villanueva3, Simon R. Poulson4, 1.

Department of Mechanical Engineering, Ohio University, 1 Ohio University, Athens, OH 45701, USA

2.

Department of Chemical and Materials Engineering, University of Nevada, Reno, 1664 N. Virginia Street, Reno, NV 89557, USA

3.

USDA-PWA, ARS, WRRC, BCE, 800 Buchanan St., Albany, CA 94710, USA

4.

Department of Geological Sciences & Engineering, University of Nevada, Reno, 1664 N. Virginia Street, Reno, NV 89557, USA

*Corresponding author, email: [email protected], T.: +1(740) 593 1506, F: +1(740) 593 0476

1 ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 32

Abstract In this study, the autoclaved organic fraction of municipal solid waste pulp (OFMSW) and the digestate from OFMSW pulp after anaerobic digestion (AD) were processed by hydrothermal carbonization (HTC) at 200, 250, and 300 °C for 30 min and 2 h. The focus of this work was to evaluate the potential for producing an energy-dense solid hydrochar from either OFMSW or digestate by HTC. The fate of inorganics, especially the heavy metals in hydrochar is discussed. In addition, the aqueous products were analyzed to identify the chemicals produced and the chemical changes during HTC. A carbon balance was performed from the solid and liquid phase analyses. Moreover, two conceptual MSW treatments consisting of autoclaving with or without AD, but including HTC were proposed and mass and energy balances were performed. From the proximate, ultimate, FTIR, and fiber analyses, the hydrochar becomes increasingly energy and inorganic dense with the increase of HTC temperature. Keywords: Municipal solid waste; Autoclave; Digestate; Hydrothermal carbonization; Hydrochar; Solid fuel;

2 ACS Paragon Plus Environment

Page 3 of 32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Introduction In 2013, the U.S generated 254 million tons of municipal solid waste (MSW) and recycled and composted about 87 million tons of this material, equivalent to a 34.3 % recycling rate 1. Paper products and yard wastes comprise the majority of recovery (>60 % for each) yet these components represent nearly a quarter of the discarded waste. In all, even with diversion programs the biogenic content (renewable organic content) of discarded MSW remains >50 % by weight. Food waste comprises 21% of the discarded stream; urban recovery programs will help to reduce the volume of food waste in the future to landfill. However, data shows that even with advanced diversion programs including high degree of source separated food waste recovery, the biogenic content of MSW changes very little since equal amounts of non-biogenic materials of value are also recovered from the waste stream 2. Further recovery of biogenic materials by traditional waste handling methods and source separation becomes economically increasingly difficult with further diversion. The goal of zero organic waste to landfill through methods of non-incineration requires consideration of new technologies. Steam autoclaving is a technology that has been around since the 80’s 3-4 and can efficiently divide the biogenic and non-biogenic fractions of MSW for best re-use. 5-6 Autoclaving eliminates hazardous hand sorting of raw garbage and in the process of separating the pulp fibers, sterilizes the output and allows for sequestration of pollutants that could otherwise leach into the groundwater or the atmosphere over time 7.The organic fraction is recovered by trommel screen (accepts