In Situ Sum Frequency Generation Vibrational ... - ACS Publications

Sum frequency generation surface vibrational spectroscopy and kinetic measurements using gas chromatography have been used to identify a reactive surf...
0 downloads 0 Views 199KB Size
J. Phys. Chem. B 2006, 110, 10051-10057

10051

In Situ Sum Frequency Generation Vibrational Spectroscopy Observation of a Reactive Surface Intermediate during High-Pressure Benzene Hydrogenation Kaitlin M. Bratlie, Lucio D. Flores, and Gabor A. Somorjai* Department of Chemistry, UniVersity of California, Berkeley, California 94720, and Materials Science DiVision, Lawrence Berkeley National Laboratory, Berkeley, California 94720 ReceiVed: February 28, 2006; In Final Form: April 6, 2006

Sum frequency generation surface vibrational spectroscopy and kinetic measurements using gas chromatography have been used to identify a reactive surface intermediate in situ during hydrogenation of benzene on a Pt(111) single crystal surface at Torr pressures. Upon adsorption at 310 K, both chemisorbed and physisorbed benzene coexist on the surface, a result which has not previously been observed. Kinetic measurements show a linear compensation effect for the production of both cyclohexane and cyclohexene. From these data the isokinetic temperature was identified and correlated to the chemisorbed benzene species, which were probed by means of vibrational spectroscopy. Additionally, chemisorbed benzene was determined to be a reactive intermediate, which is critical for hydrogenation.

1. Introduction Catalytic reactions involving aromatic molecules are important in the chemical industry for both fuel reforming and environmental concerns.1 To better understand industrial catalytic processes, we carry out model studies using platinum single-crystal surfaces at pressures and temperatures used in the chemical technologies. In the case of benzene hydrogenation, earlier studies have shed light on the adsorption and reaction mechanism: 1,3- as well as 1,4-cyclohexadiene, cyclohexane, and cyclohexene have been postulated as possible surface species.2-17 The large number of possible reaction pathways (based on the surface species given above), has led to numerous studies probing adsorption and isolated reactions (hydrogenation/ dehydrogenation) of these species. Despite the vast quantity of data published on these cyclic hydrocarbons, very little is known regarding the surface chemistry at ambient pressures and the nature of reactive surface intermediates. This results from a paucity of techniques that are capable of probing surface intermediates at ambient pressures. Various surface analytical techniques have led to the characterization of thermally stable adsorbates during exposure of Pt(111) to benzene at low pressure (