indoles as conformationally restricted analogs of the serotonin

Apr 12, 1989 - An X-ray diffraction study of 5g (supplemental material; see the paragraph at the end of the paper)indicated that the anion of 3b attac...
0 downloads 0 Views 2MB Size
J. Org. Chem. 1989,544785-4795 to give the desired d4A (29) as a white crystalline solid (2.6 g, 56% from adenosine): mp 191-192 OC (lit.%mp 194-195 “C); ‘H NMR (360 MHz, DMSO-d& 8.18 (9, 1H, H-2), 8.17 (9, 1 H, H-8), 7.34 (5, 2 H, NHt), 6.95 ( ~ , 1 H, H-l’), 6.46 (d, 1 H, J = 6.0 Hz, H-39, 6.14 (d, 1H, J 6.0 Hz, H-2’), 5.07 (t,1 H, J 5.5 Hz, OH), 4.89 (m, 1 H, H-4’), and 3.57 (m, 2 H, H-5’); 13C NMR (75.5 MHz, DMSO-de) 156.07 (C-2), 152.67 (C-6), 149.18 (C-4), 139.22 (C-8), 134.39 (C-2’), 125.54 (C-3’), 118.81(C-5),88.07 (C-l’), 87.89 (C-4’), and 62.81 ((2-5’). 2’,3’-Dideoxyadenosine(ddA) (5). Palladium on carbon (5%) (2.3 g) was added to a slurry of d4A (29) (4.48 g, 19.3 mmol) in 90% aqueous ethanol (240 mL). The reaction mixture was exposed to hydrogen (pressure is not necessary) and stirred for 4 h. The mixture was filtered through Celite, and the Celite was washed with ethanol (100 mL). The combined filtrate was concentrated in vacuo to ca.20 mL. The resulting slurry was dissolved in boiling ethanol (total volume 80 mL) and filtered hot through a dicalite pad. The filtrate was allowed to cool slowly to 20 “C and then stored at 0-5 “C for 18h. The solid was collected, washed with ethanol (2 X 10 mL), and dried to give 3.23 g (72%) of ddA (5) as a white solid. This sample contained 96.8% of ddA by HPLC and 1.31% adenine. The amount of adenine could be reduced to 0.67% by a recrystallization from ethanol: mp 185186 “C (lit.% mp 185-187 “C); ‘H NMR (360 MHz, DMSO-d6) 8.35 (9, 1 H, H-2), 8.13 (9, 1 H, H-8), 7.27 (8, 2 H, NHJ, 6.21 (t, 1 H, J = 5.2, J = 5.5 Hz, H-1’), 5.06 (br s, 1H, OH), 4.17 (m, 1H, H-49, 3.61 (m, 1 H, H-5’a), 3.50 (m, 1 H, H-5’b), 2.39 (m, 2 H, H-3’), and 2.04 (m, 2 H, H-2’); 13CNMR (75.5 MHz, DMSO-de) 155.93 (C-2), 152.33 (C-6), 148.72 (C-4), 138.97 (C-8), 119.03 (C-5), 84.39 (C-l’), 81.67 ((2-49, 62.91 (C-5’), 31.77 (C-39, and 25.70 (C-2’). l-(2-Bromo-2-deoxy-3,5-di-O-acetylribosyl)thymine (30). Acetyl bromide (13.8 mL, 113 mmol) was added dropwise over 0.5 h to a suspension of 5-methyluridine (22) (5 g, 19.38 mmol) in acetonitrile (250 mL) heated at reflux. On completion of addition, the solution was allowed to cool and then concentrated. The residue was dissolved in methylene chloride (50 mL) and washed with water (50 mL). The organic phase was concentrated to leave 30 as a beige solid (7.8 g, 97%): mp 55-57 “C; ‘H NMR (300 MHz, DMSO-de) 11.51 (9, 1 H, NH), 7.51 (9, 1 H, H-6), 6.12 (d, 1 H, J = 7.9 Hz, H-1’), 5.25 (dd, 1 H, J = 2.9 Hz, J = 6.0 Hz, H-39, 4.97 (dd, 1 H, J = 6.0 Hz,J = 7.8 Hz, H-2’), 4.3 (m, 1 H, H-4’), 4.27 (m, 2 H, H-59, 2.12 (s, 3 H, CH3), 2.05 (e, 3 H, CH3), and 1.79 (9, 3 H, CH3);3713CNMR (75.5 MHz, DMSO-d,) 170.23 (C=O), 169.36 (C=O), 163.52 (C-4), 150.67 (C-2), 135.46 (C-6), 110.65 (C-5), 88.38 (C-l’), 79.74 (C-49, 71.35 (C-3’),62.98 ((2-59, 47.25 (C-2’), 20.63 (2 CH3), and 12.22 (CH,). 1- ( 5 - 0 -Acet y 1 - 2,3 -dideox y - B - D-glycero -pent - 2-eno furanosy1)thymine (31). A Zn/Cu couple (3 g, Fairfield chemicals) was heated at reflux in acetic acid (20 mL) for 0.5 h.

4785

The suspension was filtered and washed with methanol. The couple was suspended in methanol (70 mL), and 1-(2-bromo-2deoxy-3,5-di-0-acetylribosyl)thymine(30)(1 g, 2.4 mmol) was added, and the mixture was stirred for 0.5 h. The mixture was filtered and concentrated, to leave an oil, which was purified by flash column chromatography,methanol/methylene chloride (1:9). The desired product 31 was isolated as a white solid (0.64 g, 53%): mp 179-181 “C (lit.39 mp 179-181 “C); ‘H NMR (300 MHz, DMSO-de) 11.37 ( 8 , 1H, NH),7.25 (8, 1H, H-6), 6.78 ( ~ , H, 1 H-l’), 6.38 (d, 1 H, J = 6 Hz, H-3’), 5.98 (d, 1 H, J = 6 Hz, H-2’), 4.95 (s, 1 H, H-49, 4.18 (m, 2 H, H-5‘1, 2.00 (5, 3 H, CH3), and 1.75 (5, 3 H, CH3); ‘3C NMR (75.5 MHz, DMSO-d& 170.44 (C-4), 164.04 (C=O), 151.02 (C-2), 136.14 (C-6), 133.91 (C-3’), 126.75 (C-2‘), 109.75 (C-5), 89.99 (C-l’), 83.90 (C-49, 64.76 (C-59, 20.83 (CH,), and 12.35 (CH3). 1- (2,3-Dideoxy-@-~-glycero -pent-2-enofuranosy1)thy mine (d4T) (2). Sodium methoxide (0.12 g, 2.35 mmol) was added to a suspension of 1-(5-0-acetyl-2,3-dideoxy-P-~-glycero-pent-2enofuranosy1)thymine (31) (0.5 g, 1.88mmol) in methanol (20 mL) and the solution stirred a t ambient temperature for 2 h. The solution was neutralized with strongly acidic ion-exchange resin (Dowex 50 X 8-200),which had been washed with methanol. The resin was filtered and then washed with methanol (2 X 20 mL). The filtrate was concentrated and purified by flash column chromatography on silica gel, methylene chloride/methanol/ammonium hydroxide (90101) to give a white solid (0.36 g, 87%): mp 165-166 “C (lit.7*35mp 164-166 “C); ‘H NMR (360 MHz, DMSO-de) 11.29 (8, 1 H, NH), 7.63 (9, 1 H, H-6), 6.80 (dt, 1 H, J = 1.3 Hz, J = 0.4 Hz, H-1’), 6.36 (dt, 1H, J = 6.1 Hz, J = 1.7 Hz, H-39, 5.90 (dt, 1 H, J = 6.1 Hz, J = 1.4 Hz, H-2’), 5.01 (m, 1 H, OH), 4.76 (s, 1 H, H-49, 3.60 (m, 2 H, H-5’), and 1.71 (s, 3 H, ( 3 3 3 ) .

Acknowledgment. We thank Maureen D’lugozima for technical assistance in part of this work. Registry No. 2,3056-17-5; 5, 4097-22-7; 9, 58-96-8; 10,619594-4; 12,6038-55-7;13, 5974-93-6; 15,16628-81-2;16,42867-74-3; 20 R = AciBu, 42867-75-4; 22,1463-10-1; 22 (2’,3’,5‘-tri-O-benzoyl deriv), 3180-76-5; 23 R = AciBu, 122383-24-8; 24 R = AciBu, 122383-259;25,5&61-7; 26 R = AcBu, 122383-26-0;27 R = AciBu, 122383-27-1; 28 R = AciBu, 122383-28-2; 29, 7057-48-9; 30, 110483-43-7; 31, 77421-68-2; AciBuBr, 40635-67-4; 5’-O-trityluridine, 6554-10-5; thymine, 65-71-4; l-O-acety1-2,3,5-tri-Obenzoylribose, 14215-97-5. ~

(38)Cushley, R.J.; Codington, J. F.; Fox, J. J. Can. J. Chern. 1968,46, 1131. (39)Skaric, V.;Matulic-Adamic, J. Helv. Chirn. Acta 1980,63, 2179.

Synthesis of Pyrano[4,3-b ]indoles as Conformationally Restricted Analogues of the Serotonin Antagonist ICs 205-930 and as Precursors to 2-Vinylindoles John E. Macor,* Kevin Ryan, and Michael E. Newman Central Research Division, Pfizer Inc., Groton, Connecticut 06340 Received April 12, 1989

A useful synthesis of some pyrano[4,3-b]indoles is described that allows access to conformationally restricted analogues of the serotonin (5HT3) antagonist, ICs 205-930. These pyrano[4,3-b]indoles can be converted in one step to 2-vinylindole derivatives.

Introduction Recently, in conjunction with attempts to discover the active conformation of t h e extremely novel and potent serotonin (5HTJ antagonist ICs 205-930, there was a 0022-3263/89/1954-4785$01.50/0

desire to synthesize t h e spiropyrano[4,3-b]indole1 as a conformationally restricted analogue of the drug. A survey of t h e literature revealed that while t h e generic pyranoindole heterocycle has received some attention, pyrano0 1989 American Chemical Society

4786

J. Org. Chem., Vol. 54, No. 20,

1989

Macor et al. Scheme I co2Et

.

R

ICs 205-930

1

[4,3-b]indoles have not been studied to any appreciable acid extent. 2-(3-Carbethoxy-l-methylindol-2-yl)acetic (formed via the appropriate Fischer indolization route) has been dehydrated to yield 4,5-dihydro-5-methylpyrano[4,3-b]indole-l,3-dione,' which has been used as a precursor to an indole o-quinodimethane useful in Diels-Alder reactions with activated dienophiles.2 There have been a few other isolated reports of pyrano[4,3-6]indoles3 in the literature, but a synthetically useful approach to these compounds has not yet appeared. In the course of our investigations it was found that pyrano[4,3-b]indoles were excellent precursors to 2vinyl in dole^,^ a relatively inaccessible but synthetically useful class of indole derivative^.^ 2-Vinylindoles have been used as intermediates in the synthesis of Aspidosperma alkaloidss and are useful building blocks for the synthesis of natural products. A small number of limited syntheses of this indole derivative have been recently reported,' but the need for a simpler approach to those compounds still remains. This paper will therefore describe a novel approach to pyrano[4,3-b]indoles and detail their use as precursors to 2-vinylindoles. Results and Discussion Annulation of a readily available indole nucleus was the strategy of our synthesis of pyran0[4,34]indoles. 2-A1kylindole-3-carboxylates2 were easily obtained via either the Nenitzescu or Fischer8 indole synthesis. Protection of the indole nitrogen in these compounds was easily effected via NH deprotonation with sodium hydride followed by alkylation or acylation with the appropriate electrophile to yield 3 (Scheme I). Treatment of 3 with a slight excess of lithium diisopropylamide (LDA) at -78 "C rapidly deprotonated the C2-methyl (or methylene) group of these molecules. The resulting anions of 3 were stable at this temperature as a result of electron density delocalization by both the indole ring and the vinylogous 3-carboxylate. These anions readily reacted with aldehydes or ketones to form the alkoxides of 4 (Schemes I1 and 111), which generally did not spontaneously lactonize at -78 "C. With quenching at -78 "C, a good to excellent yield of alcohols 4 could be obtained (Scheme 11). Lactonization of these alcohols via heating under acid catalysis (use of refluxing (1) Ali, M. I.; Abdel-Fattah, A. M.; El-Reedy, A. M.; Hussain, S. M. Egypt. J . Chem. 1983,26, 361. (2) Kita, Y.; Mohri, S.; Tsugoshi, T.; Maeda, H.; Tamura, Y. Chern. Pharm. Bull. 1985,33, 4723. (3) (a) Behringer, H.; Weissauer, H. Chem. Ber. 1952, 85, 743. (b) Bailey, A. S.;Birch, C. M.; Illingworth, D.; Willmott, J. C. J . Chem. SOC. Perkin Tram. 1 1978, 1471. (c) Bahadur, G. A.; Bailey, A. S.;Middleton, N. W.; Peach, J. M. J . Chem. SOC.,Perkin Trans. 1 1980, 1688. (d) Moskovkina, T. V.; Tilichenko, M. N. Khirn. Geterotsikl. Soedin. 1982, 82, 46. (4) Macor, J. E.; Ryan, K.; Newman, M. E. Tetrahedron Lett. 1989, 19, 2509. (5) (a) Pindur, U.Chirnia 1985, 39, 264. (b) For a review of 2-vinylindoles, see: Pindur, U.Heterocycles 1988, 27, 1253. (6) (a) Kuehne, M. E.; Podhorez, D. E.; Mulamba, T.; Bornmann, W. G. J. Org. Chem. 1987, 52, 347. (b) Kuehne, M. E.; Bornmann, W. G.; Earley, W. G.; Marko, I. J. Org. Chem. 1986, 51, 2913. (7) (a) Pindur, U.; Eitel, M. Helu. Chirn. Acta 1988, 71, 1060. (b) Bergman, J.; Pelcman, B. Tetrahedron 1988,44, 5215. (8)(a) Mills, K.; A1 Khawaja, I. K.; Al-Saleh, F. S.; Joule, J. A. J. Chem. SOC.,Perkin T r a m . 1 1981,636. (b) Suzuki, H.; Thiruvikraman, S. V.; Osuka, A. Synthesis 1984, 616.

~

C

H

1 ) NaH, 2

C02Et

THF,0' C

% 2) Rx

-R573-$cH2R2

9

2

a

b c d e f g

h

Rl

R,

R,

CH3

H H CH, H CH3 H H H

H

CH? CH; CH,OCHzPh CH20CHzPh CO@u C02Et SOzC&CH,

RI

?4 Yield u)

99 80 92 78 83 85 27 62

OCH,

H H H H H H

Scheme I1 CO,Et

CO,Et

9 R,

R,

(CH+

3

b

CHI

L

H

a

CH7

Ph N C H I pipendil

RI

(4!

(U

87

73 \ " l e 1

83 79

6'

XI

22 I\cii:l

62

"(1) LDA, THF, -78 OC; (2) R3CORI. *Acetic acid reflux. TsOH/dioxane reflux. Note 1: 35% using TsOH/dioxane reflux (19% of 2-vinylindole ethyl ester also isolated). Note 2: 34% acetylation of alcohol.

acetic acid was preferred) gave varying yields of the desired pyranoindoles 5 (Scheme 11). When R3and R4 were alkyl, the lactonization proceeded well, but when R3or R4 was phenyl, the yield of 5c was low, and other byproducts were seen. Alternatively, warming the alkoxides (often all the way to room temperature) slowly led to their lactonization to yield the desired pyrano[4,3-6]indoles5 (Scheme 111). This slow lactonization can easily be understood by viewing the indoles 3 as vinylogous carbamates. In the cases where the indole nitrogen was protected as its p-toluenesulfonamide, 51x1and 5n,it should be noted that lactonization (among other reactions) did occur at -78 "C; this was a result of the decreased donation of electron density from the indole nitrogen to the 3-carboxylate as a result of the electronwithdrawing nature of R1. As one would expect, the rate of lactonization was dependent on the nature of the substituents R3and R4.Geminal disubstitution (Le., use of ketones) accelerated this rate of lactonization (ThorpeIngold effect), and phenyl substituents (i.e., from benzaldehyde, acetophenone, and benzophenone) retarded the rate of lactonization and gave lower yields of the desired heterocycle (Scheme 111). Additionally, when R3or R4 was phenyl, not only was the lactonization slowed, but the rate of formation of the byproduct 2-vinylindole (see below) was increased. This combination of results led to low isolated yields of pyrano[4,3-b]indoles5 where R3 or R4 was phenyl. It should be noted that the combined yield of 5a from the formation of 4a (isolated) and cyclization to 5a (Scheme 11) was not significantly better than in the one-step, base-controlled reaction (Scheme 111). These lactonizations were achieved through warming from -78 "C to ambient temperature, and their progress was monitored closely by TLC. This was necessary because these compounds represented intermediates on a thermodynamically driven pathway to 2-vinylindoles 6. The pyran0[4,34]indoles 5 still retained acidic protons a to C2 of the indole ring, and therefore, under the basic reaction conditions (slight excess of LDA and ethoxide

Synthesis of Pyrano[4,3-b]indoles

J . Org. Chem., Vol. 54, No. 20, 1989 4787 Scheme I11 0

L

a C

d

e f g

h j

k

1 m n

CH;

0

P q (1) LDA, THF, -78

Pd/C, ethanol reflux.

OC;

alkoxide of 4

J

H -(CH2)5H Ph H H Ph CH3 H CHzCH2CH3 H H Ph Ph H -tmpinylH -N-fBOC-piperidylH -tropinylH -N-fBOC-piperidyl-[CH?hCH3 CHzCH2CX3 H H CH3 H CH3 H CHzCH2CH3 H H CH3 CH3 CH3 CH3 CHS (2) R&OR4, -78 “ C . *Warming -78

O

from the lactonization), deprotonation of this methylene occurred. This was manifested upon warming of the reaction solution by the rapid appearance of 2-vinylindole3-carboxylic acids 6 resulting from “internal elimination” of the acid functionality from the deprotonated lactones (Scheme 111). 6 represented the thermodynamically most stable product in this reaction sequence. Therefore, TLC was used to determine the optimized yield of the lactone 5 , while minimizing the amount of the olefin 6 that was formed as a byproduct. The transformation of 5 to 6 could be effected simply with the ethoxide liberated in the lactonization, since a reaction using exactly 1 equiv of LDA still slowly yielded the olefin 6 upon warming to room temperature. It should be noted that this “internal elimination” was retarded in cases where the resulting olefin was congested (i.e., 5g, 5j, and 5q). Other attempts to lactonize 4 led primarily to the olefin 6 (under basic conditions), decomposition or olefin 6 (under acidic conditions), or no reaction (under thermal conditions). The use of ambient warming of the alkoxide of 4 with careful monitoring of the reaction by TLC was the most general and reproducible route to the pyrano[4,3blindoles 5. Deprotection of the pyrano[4,3-b]indoles 50, 5p, and 5q using Pd/C and ammonium formate in refluxing ethanol smoothly led to the corresponding NH pyrano[4,34]indoles 7 (Scheme 111). Compounds 5g and 5j represent our desired conformationally restricted analogues of ICs 205-930. An X-ray diffraction study of 5g (supplemental material; see the paragraph at the end of the paper) indicated that the anion

OCH3 OCH3 OCH3 OCH3 OCH7 OCH; OCH3 H H H H H H H H C to room

58 39 32 63 17 79 55 58 52 43 23 43 53 64 84

(12) 35

--

--

26 ~~

0 5 (21) 0

--

---_

--

-----

19

__ __

--

47 74 57

-----

--

temperature.

( ) = Yield determined by NMR spectroscopy

_-

tropinyl

=H2‘wCHz HzC

CH2

piperidyl = (N)

R

When R1 = (benzy1oxy)methylene: NH4C02,

of 3b attacked the ketone of tropinone from its less hindered (0)face, yielding the expected a-01 in the lactone which was completely analogous to the tropinyl (a-01) ester in ICs 205-930. Unfortunately, these compounds did not demonstrate any in vivog or in vitro’O activity as 5HT3 antagonists, thus indicating that they do not represent the active conformation of ICs 205-930. While the synthesis of the pyranoindoles 5 was plagued by their propensity to “internally eliminate” the carboxylic acid yielding 2-vinylindole derivatives 6, this side reaction could be optimized as a directed synthesis of these important indole building blocks. Direct treatment of the reaction mixture containing 5 and traces of 6 with excess methoxide in methanol followed by heating led rapidly to the 2-vinylindole-3-carboxylic acids 6 in good yields (Scheme IV). When the starting indole-3-carboxylates 3 were protected with an alkyl substituent (R,= methyl or (benzyloxy)methyl),the resulting carboxylic acid (R, = H) 6 could be readily decarboxylated by heating in refluxing bromobenzene for a few hours to deliver nearly quantitative yields of the 2-vinylindoles Sa,b,d,e,g. When the starting indole-3-carboxylate 3 was protected with a carbamate derivative, a different reaction pathway was seen (Scheme V). Rapid transacylation occurred from the indole nitrogen to the alkoxide forming a carbonate 9, which then easily eliminated under the standard reaction (9) Richardson, B. P.; Engel, G.; Donatsch, P.; Stadler, D. A. Nature 1985, 316, 126.

(10) Kilpatrick, G. J.; Jones, B. J.; Tyers, M. B. Nature 1987,330,746.

4788

J. Org. Chem., Vol. 54, No. 20,

1989

Macor e t al.

-Scheme

c

IV

pzzq Rl

a b d

e g q r S

t

u

" (1) LDA, THF, -78

CH3 CH3 CH3 CH3 CH3 CHzOCH2Ph C02Et C02Et COfiBu COdBu

Rz H H H H H CH3 H H H H

R3

-(CH2)5CH3 Ph (CH2)2CH3 -mopinylCH3 (CH,),CH3 (CH,),CH, Ph CH3

R4

CH3 H H CH3 H CH3 CH3 CH3

"C; (2) R3COR4,-78 "C to room temperature.

RS

OCH3 OCH3 OCH3 OCH3 OCH3 H H H H H

(6, (S) 50 90

R6

R7

CH3 CH3 CH3 CH3 CH3 CH20CH2Ph H H H H

H H 86 H 85 H 53 100 H H 77 CH3 33 CH2CH3 87 CH2CH-j 75 CH2CH3 64

NaOMe/MeOH, heat. "Refluxing

94 95 93 99 ---

--

--

--

bromobenzene (156 "C).

"(1) LDA; (2) acetone. bH,O. cNaH/THF, heat.

conditions (base in refluxing tetrahydrofuran). T h i s mechanism was supported b y the formation of the alkyl 2-vinylindole-3-carboxylates 6s-v (Ft, = Me or Et; Scheme IV) and b y the isolation (78%) and characterization of the carbonate 9u via quenching the reaction solution at -78 O C after the addition of acetone (Scheme V). Although there were no attempts to hydrolyze and decarboxylate these 2-vinylindoles, there is ample literature evidence that this is a straightforward transformation." As one would expect, the relative size of R3 and R4 dictated the cis:trans ratio of the olefins formed in Scheme IV. When R4 was H and R, was alkyl or phenyl, the trans olefin was the only product seen in the reaction as shown by the typical trans coupling constant of the olefin in the isolated product. When the relative sizes of the two groups were similar, a mixture of olefins was produced, with the trans olefin assumed to be predominate on the basis of chemical precedent and analogy. Finally, it is worth noting that this method has the ability to form tetrasubstituted olefins, as shown b y the formation of 6q. The NMR spectrum of 6q attested to t h e steric congestion surrounding t h e tetrasubstituted olefin i n that molecule as hindered rotation of the (benzy1oxy)methylene group on N1 led to the protons on the animal methylene appearing as a pair of AB doublets. In conclusion, we have demonstrated a useful synthesis of some pyrano[4,3-b]indoles and the use of that hetero(11)Brown, R.K.The Synthesisof the Indole Nucleus. Houlihan, W. J., Ed. In the series The Chemistry of Heterocyclic Compounds; Weissberger, A. W., Taylor, E. C., Eds.; Wiley: New York, 1972; Vol. 25,Part 1, p 414.

cycle as a precursor to 2-vinylindoles. Work continues in our laboratories exploring further uses of these compounds.

Experimental Section Melting points were determined on a Thomas-Hoover opencapillary melting-point apparatus and are uncorrected. Infrared spectra were obtained from a Perkin Elmer IR-283B infrared spectrophotometer, and NMR spectra were obtained on either a Bruker AM-300 (300 MHz) or a Varian XL300 (300 MHz) spectrometer. NMR data are reported in parts per million (6) and are referenced to the deuterium lock signal from the sample solvent. Low-resolution mass spectra were obtained on a Finnigan 4310 instrument; high-resolution mass spectra were obtained on a AEI MS-30 instrument. Elemental analyses were performed a t Central Research Division, Pfizer, Inc., Groton, CT, and at Schwarzkopf Microanalytical Laboratory, Woodside, NY. Commercial reagents (Aldrich Chemical Co.) were utilized without further purification, including Aldrich Gold Label tetrahydrofuran (THF) and diisopropylamine. General procedures listed here represent typical reaction procedures for the class of compounds described. Column chromatography was performed by using 32-63-km silica gel and was executed under nitrogen pressure (flash chromatography) conditions. Room temperature refers to 20-25 "C. General Synthesis of N-Substituted 2-Alkylindole-3carboxylates (3). A mixture of the ethyl 2-alkylindole-3carboxylate 2 (20.0 mmol) and sodium hydride (60% in oil, 0.88 g, 22.0 mmol, 1.1equiv) in anhydrous T H F (50 mL) was stirred a t 0 "C under nitrogen for 2 h or until effervescence ceased for 15 min. To this solution was added the appropriate electrophile (22.0 mmol, 1.1equiv), and the resulting reaction mixture was allowed to warm to room temperature. The mixture was then either stirred at room temperature under nitrogen or refluxed under nitrogen for times depending on substrate. A saturated aqueous solution of sodium bicarbonate (25 mL) was then added

Synthesis of Pyrano[4,3-b]indoles

to the resulting reaction mixture, and this aqueous mixture was extracted with ether (3 X 25 mL). The ether extracts were combined, dried (MgSO,), and evaporated under reduced pressure. The extraction residue was purified by either recrystallization or column chromatography using silica gel (approximately 100 g) and elution with an appropriate solvent system depending on substrate to afford the desired 1-substituted 2-alkylindole-3carboxylate 3. Ethyl 1,2-Dirnethylindole-3-carboxylate(3a). Ethyl 2methylindole-3-carboxylatehand methyl iodide were used, and the reaction time was 2 h at room temperature. The extraction residue was passed through a silica gel filter followed by 1:l ether/hexanes to yield 3a (99%) as a white, crystalline solid mp 92.0-94.0 "C (lit.12mp 95 "C); 'H NMR (CDCl,) 6 8.13-8.09 (m, 1H), 7.26-7.19 (m, 3 H), 4.38 (q, J = 7.3 Hz, 2 H), 3.64 (s, 3 H), 2.74 (9, 3 H), 1.44 (t, J = 7.1 Hz, 3 H). Ethyl 1,2-Dimethyl-5-methoxyindole-3-carboxylate (3b). A mixture of ethyl 5-hydroxy-2-methylindole-3-carboxylate13 (30.0 g, 137 mmol), sodium hydride (60% in oil, 6.90 g, 172 mmol, 1.3 equiv), and anhydrous THF (500 mL) was stirred at 0 "C under nitrogen for 1h. Then methyl iodide (9.0 mL, 145 mmol, 1.1equiv) was added, and the resulting mixture was stirred at room temperature under nitrogen for 3 h. The mixture was then cooled to 0 "C, and more sodium hydride (60% in oil, 6.90 g, 172 mmol, 1.3 equiv) was added, and this mixture was stirred at 0 "C under nitrogen for 1 h. Methyl iodide (9.0 mL, 145 mmol, 1.1 equiv) was again added, and the resulting mixture was stirred at room temperature under nitrogen for an additional 24 h. Water (200 mL) was then added to this mixture, and the resulting mixture was extracted with ether (3 X 100 mL). These extracts were combined, dried (MgS04),and evaporated under reduced pressure. The residual solid was dissolved in methylene chloride (50 mL), and this solution was passed through a silica gel filter (approximately 1 kg) followed by an elution of 20% ethyl acetate in hexanes (6 L). This filtrate was then evaporated under reduced pressure to yield 3b (27.08 g, 110 mmol, 80%) as a white, crystalline solid: mp 117.5-118.0 "C (lit.', mp 122-124 "C); IR (KBr) 1645,1610,1590,1465,1445,1425,1405,1350,1200cm-'; 'H NMR (CDC1,) 6 7.65 (d, J = 2.5 Hz, 1H), 7.15 (d, J = 8.8 Hz, 1H), 6.85 (dd, J = 2.5 and 8.8 Hz, 1 H), 4.38 (q, J = 7.1 Hz, 2 H), 3.87 (s, 3 H), 3.64 (s,3 H), 2.72 (9, 3 H), 1.44 (t,J = 7.1 Hz, 3 H); 13CNMR (CDCl3) 6 166.2, 155.6, 145.3,131.6, 127.4,111.6,109.7,103.6,59.3, 55.7, 29.7,14.6,12.0;LRMS (m/z,re1 intensity) 248 (18), 247 (M+, 100), 218 (49), 232 (14), 218 (49), 202 (74), 175 (43), 131 (34), 130 (31), 101 (20). Anal. Calcd for C14H17N03:C, 68.00; H, 6.93; N, 5.66. Found: C, 68.05; H, 6.91; N, 5.50. Ethyl 2-Ethyl-1-methylindole-3-carboxylate (3c). Ethyl 2-ethylindole-3-carbo~ylate~~ and methyl iodide were used, and the reaction time was 5 h at room temperature. Recrystallization of extraction residue in hexanes yielded 3c (92%) as a white, crystalline solid: mp 78.5-79.5 "C; IR (KBr) 1685, 1530, 1480, 1475, 1450, 1445, 1410, 1280, 1210 cm-'; 'H NMR (CDC13) 6 8.14-8.10 (m, 1 H), 7.31-7.20 (m, 3 H), 4.38 (q, J = 7.4 Hz, 2 H), 3.72 ( 8 , 3 H), 3.23 (q, J = 7.5 Hz, 2 H), 1.43 (t,J = 7.3 Hz, 3 H), 1.25 (t, J = 7.6 Hz, 3 H); LRMS ( m / z re1 intensity) 232 (32), 231 (M', 100), 202 (37), 188 (66), 186 (88), 184 (37), 159 (49), 158 (73, 143 (53), 115 (37). Anal. Calcd for C14H17N02:C, 72.70; H, 7.41; N, 6.06. Found: C, 72.66; H, 7.46; N, 6.01. E t h y l l-[(Benzyloxy)methyl]-2-methylindole-3carboxylate (3d). Ethyl 2-methylindole-3-carboxylate and benzyl chloromethyl ether were used, and the reaction was heated a t reflux (66 "C) for 2 h. Chromatography of the extraction residue using silica gel and elution with 15% ethyl acetate in hexanes afforded 3d (78% actual, 100% conversion based on returned starting material) as a clear pale yellow oil, which crystallized on cooling: mp 49.0-50.5 OC; IR (KBr) 1690,1550,1460,1410,1385, 1335, 1145 cm-'; 'H NMR (CDCl,) 6 8.17-8.14 (m, 1H), 7.38-7.22 (m, 8 H), 5.57 (s, 2 H), 4.44 (s, 2 H), 4.42 (9, J = 7.1 Hz, 2 H), 2.81 (s,3 H), 1.47 (t, 7.1 Hz, 3 H); 13CNMR (CDC13)6 166.0, 145.3, 136.8, 136.6, 128.6, 128.1, 127.7, 126.7, 122.6, 122.1, 121.6, 109.4, 105.9, 71.7, 69.9, 59.6, 14.6, 11.7; LRMS ( m / z re1 intensity) 324 (12) (a) Kornet, M. J.; Thio, A. P.; Tolbert, L. M. J. Org. Chern. 1980, 45, 30. (b) Degen, J. Justus Liebigs Ann. 1886, 236, 157. (13) Aldrich Chemical Co. (14) Parr, R. W.; Reiss, J. A. Aust. J. Chern. 1984, 37, 1263.

J. Org. Chem., Vol. 54, No. 20, 1989

4789

(47), 323 (M', loo), 293 (45), 217 (18),144 (16), 91 (57), 87 (27), 85 (84), 83 (97). Anal. Calcd for CzoHzlN03: C, 74.28; H, 6.55; N, 4.33. Found: C, 73.95; H, 6.52; N, 4.34. Ethyl 1-[ (Benzyloxy)methyl]-2-ethylindole-3-carboxylate (3e). Ethyl 2-ethylindole-3-carboxylateand benzyl chloromethyl ether were used, and the reaction was heated at reflux (66 "C) for 2 h. Column chromatography of the extraction residue using silica gel and elution with 10% ethyl acetate in hexanes yielded 3e (83%) as a pale yellow oil: IR (CHC13)1690,1540,1460,1420, 1380 cm-'; 'H NMR (CDCI,) 6 8.19-8.16 (m, 1 H), 7.40-7.24 (m, 8 H), 5.59 (s, 2 H), 4.47 (9, 2 H), 4.42 (q, J = 7.1 Hz, 2 H), 3.27 (q, J = 7.5 Hz, 2 H), 1.47 (t, J = 7.5 Hz, 3 H), 1.29 (t, J = 7.4 Hz, 3 H); 13C NMR (CDCl,) 6 165.6, 151.1, 136.8, 136.6, 128.6, 128.1, 127.8, 126.8, 122.6, 122.2, 121.7, 109.6,105.1,71.6,70.1,59.6, 19.0, 14.6, 14.2; LRMS ( m / z ,re1 intensity) 338 (22), 337 (M', 66), 307 (20), 292 (14), 262 (15), 231 (53), 158 (49), 91 (100). Anal. Calcd for CZ1H,NO3: C, 74.75; H, 6.87; N, 4.15. Found C, 74.38; H, 6.86; N, 4.13. E t h y l 1-(tert -Butoxycarbonyl)-2-methylindole-3carboxylate (3f). Ethyl 2-methylindole-3-carboxylate and ditert-butyl dicarbonate were used, and the reaction time was 48 h at room temperature. Column chromatographyof the extraction residue using silica gel and elution with 3% ethyl acetate in hexanes yielded 3f (85%) as a white solid: mp 67.0-69.0 "C; IR (KBr) 1740, 1695, 1560, 1460, 1375, 1355, 1320 cm-'; 'H NMR (CDC13)6 8.07-8.01 (m, 2 H), 7.26-7.20 (m, 2 H), 4.40 (q, J = 7.3 Hz, 2 H), 2.96 (s, 3 H), 1.68 (s, 9 H), 1.44 (t, J = 7.3 Hz, 3 H); 13CNMR (CDCl,) 6 165.5, 150.0, 145.8, 135.5, 127.2, 124.1, 123.6, 121.3, 114.9, 110.4, 85.0, 60.1, 28.2, 15.0, 14.5; LRMS ( m / z , re1 intensity) 304 (27), 303 (M', 54), 248 (41), 247 (89), 203 (74), 174 (4.9, 158 (63), 57 (100). Anal. Calcd for C17Hz1N04:C, 67.31; H, 6.98; N, 4.62. Found: C, 67.40; H, 7.09; N, 4.62. Ethyl l-(Ethoxycarbonyl)-2-methylindole-3-carboxylate (3g).15 A solution of 2-methylindole (57.7 mmol) and ethylmagnesium bromide (3 M in ether, 21.0 mL, 63 mmol, 1.1equiv) in anhydrous THF (125 mL) was stirred at room temperature under nitrogen for 1 h. Then, ethyl chloroformate (6.0 mL, 62.7 mmol, 1.1equiv) was added dropwise, and the resulting reaction mixture was stirred at reflux (66 "C) under nitrogen for 12 h. Then, sodium hydride (60% in oil, 2.30 g, 57.5 mmol, 1 equiv) was added, and this mixture was heated at reflux for 3 h and then stirred at room temperature for 12 h. A dilute solution of hydrochloric acid (3%, 50 mL) was added to the reaction mixture, and this aqueous mixture was extracted with ethyl acetate (3 X 50 mL). These extracts were combined, dried (MgS04), and evaporated under reduced pressure. The residual oil was dissolved in ether, and upon cooling of this solution a solid precipitated. This solid was filtered to yield 3g (4.35 g, 15.80 mmol, 27%) as a pale pink, crystalline solid: mp 93.5-95.5 "C; IR (KBr) 1735, 1695,1605,1560,1480,1470,1455,1435,1315,1195cm-'; 'H NMR (CDCI,) 6 8.09-8.04 (m, 2 H), 7.29-7.24 (m, 2 H), 4.52 (q, J = 7.4 Hz, 2 H), 4.40 (q, J = 7.4 Hz, 2 H), 2.97 (s, 3 H), 1.49 (t,J = 7.4 Hz, 3 H), 1.44 (t,J = 7.5 Hz, 3 H); 13CNMR (CDCl3)6 165.3,151.6, 145.9, 135.3, 127.3,124.3, 123.8,121.4,115.1,110.9,63.8,60.2, 14.9, 14.5,14.3; LRMS (m/z re1 intensity) 276 (17), 275 (M', 100), 230 (19), 202 (18), 186 (26), 174 (34), 158 (63), 130 (33). Anal. Calcd for C15H17N04:C, 65.44; H, 6.22; N, 5.09. Found: C, 65.30; H, 6.12; N, 5.18. Ethyl 1-(p-Tolylsulfonyl)-2-methylindole-3-carboxylate (3h). Ethyl 2-methylindole-3-carboxylateand p-toluenesulfonyl chloride were used, and the reaction time was 12 h at room temperature. Chromatography of the extraction residue using silica gel and elution with ether/hexanes (1:4) yielded 3h (62% actual, 85% conversion based on returned starting material) as a white solid mp 108.0-110.0 "C; IR (KBr) 1655,1600,1590,1585, 1540, 1525, 1495, 1390, 1385, 1315, 1190, 1140 cm-'; 'H NMR (CDCl,) 6 8.25-8.22 (m, 1H), 8.06-8.03 (m, 1H), 7.69 (d, J = 8.6 Hz, 2 H), 7.34-7.28 (m, 2 H), 7.21 (d, J = 8.4 Hz, 2 H), 4.37 (q, J = 7.2 Hz, 2 H), 2.96 (s, 3 H), 2.33 (s, 3 H), 1.41 (t,J = 7.1 Hz, (15) This procedure was designed to yield ethyl 2-methylindole-3carboxylate, but fortuitously provided ample quantities of the N-carbethoxy-protected analogue 3g,which we ultimately desired. This procedure in no way represents an optimized procedure for the formation of 3g. Optimization of this procedure, although not studied, should include use of an excess of 2 equiv of ethyl chloroformate in the reaction.

4790 J. Org. Chem., Vol. 54, No. 20, 1989 3 H); 13C NMR (CDCl,) 6 164.9, 145.5, 145.0, 135.9, 130.1, 127.3, 126.6, 124.7,124.3, 121.7, 114.2, 111.6,60.4,21.6,14.4, 13.8; LRMS ( m / z re1 intensity) 358 (8), 357 (M', 35), 202 (34), 174 (31), 157 (34), 155 (54), 146 (57), 130 (29), 91 (100). Anal. Calcd for C14HldO4S: C, 63.85; H, 5.36; N, 3.92. Found C, 63.83; H, 5.27; N, 3.82.

Macor e t al. 3420,1665,1620,1580,1515,1485,1405,1380,1305,1205

cm-';

'HNMR(CDC1,)67.55(d,J=2.2H~,lH),7.18(d, J=8.9Hz, 1 H), 6.87 (dd, J = 2.2 and 8.9 Hz, 1H), 4.39 (br s, OH), 4.37 (q,

J = 7.0 Hz, 2 H), 3.85 (s, 3 H), 3.70 (s, 3 H), 3.32 (br s, 2 H), 2.62-2.58 (br d, 2 H), 2.34-2.24 (m, 2 H), 2.26 (s, 3 H), 1.85-1.75 (m, 2 H), 1.61-1.57 (br d, 2 H), 1.43 (t, J = 7.1 Hz, 3 H); LRMS General Procedure for the Synthesis of Ethyl 242( m / z ,re1 intensity) 360 (M', 3), 248 (13), 247 (76), 218 (18), 201 Hydroxyalkyl)-5-methoxyindole-3-carboxylates(4). To a (13), 175 (191, 114 (loo), 99 (23), 97 (44), 70 (34). Anal. Calcd for C20H28N204:C, 66.64; H, 7.83; N, 7.77. Found: C, 66.33; H, stirred solution of lithium diisopropylamide (7.5 mmol made from 7.84; N, 7.63. 1.05 mL of diisopropylamine and 3.0 mL of 2.5 M n-butyllithium General Procedure for the Direct Synthesis of 1,4-Diin hexanes, 1.5 equiv) in anhydrous THF (15 mL) at -78 "C under nitrogen was added rapidly a solution of ethyl 5-methoxy-2hydropyrano[4,3-b]indoles (5) [Method A]. To a stirred somethylindole-3-carboxylate (3b,5.00 mmol) in anhydrous THF lution of lithium diisopropylamide (7.5 mmol made from 1.05 mL (10 mL) while maintaining the reaction temperature below -40 of diisopropylamine and 3.0 mL of 2.5 M n-butyllithium in hexanes, 1.5 equiv) in anhydrous THF (15 mL) at -78 "C under "C. The resultant yellow solution was stirred at -78 "C for 15 nitrogen was added rapidly a solution of the appropriate ethyl min, at which time a solution of the appropriate aldehyde or 2-alkylindole-3-carboxylate3 (5.00 mmol) in anhydrous THF (10 ketone (7.5 mmol, 1.5 equiv) in anhydrous T H F (10 mL) was mL) while maintaining the reaction temperature below -40 "C. added dropwise, maintaining the reaction temperature below -60 The resultant yellow solution was stirred at -78 "C for 15 min, "C. The resultant reaction solution was stirred at -78 "C under at which time a solution of the appropriate aldehyde or ketone16 nitrogen for 30 min, at which time a solution of saturated sodium (7.5 mmol, 1.5 equiv) in anhydrous THF (10 mL) was added hydrogen carbonate (20 mL) was added to quench the reaction. dropwise maintaining the reaction temperature below -60 "C. This reaction mixture was then warmed to room temperature and This resultant reaction solution was then allowed to warm (usually was extracted with methylene chloride (3 X 25 mL). The extracts to room temperature), and the course of the reaction was closely were combined, dried (MgSO,), and evaporated under reduced monitored by using thin-layer ~hromatography.'~ Quenching pressure. The extractive residue was purified either by trituration occurred at a temperature when the formation of the lactone in ether or column chromatography using silica gel (approximately appeared to be optimized as indicated by TLC. The reaction 100 g) and elution with an appropriate solvent system to afford solution was quenched with a saturated solution of sodium bi4. carbonate (20 mL), and this aqueous mixture was extracted with Ethyl 2 4 (l-Hydroxycyclohexyl)methyl]-5-methoxymethylene chloride (3 X 20 mL). These extracts were combined, indole-3-carboxylate(4a). The electrophile used was cyclodried (MgS04),and evaporated under reduced pressure. The hexanone. The extraction residue was chromatographed eluting residual solid or oil was then purified either via trituration with with ether/hexanes (1:2) to afford 4a (87%) as a white solid mp the appropriate solvent or column chromatography using silica 123.0-126.0 "C; IR (KBr) 3450,1670,1650,1615,1580,1515,1485, gel (approximately 100 g) and elution with the appropriate solvent 1445, 1205 cm-'; 'H NMR (CDC1,) 6 7.57 (d, J = 2.2 Hz, 1 H), system to yield the desired 1,4-dihydropyrano[4,3-b]indole5. 7.16 (d, J = 8.9 Hz, 1 H), 6.86 (dd, J = 2.7 and 8.9 Hz, 1 H), 4.37 Spiro[cyclohexane-l,3'-(8'-methoxy-5'-methyl-[2H]-1',4'(9,J = 7.1 Hz, 2 H), 3.85 (s, 3 H), 3.70 (s, 3 H), 3.30 (br s, 2 H), dihydropyrano[4,3-b]indole)] (5a). 3b and cyclohexanone were 1.66-1.41 (m, 9 H), 1.44 (t,J = 7.1 Hz, 3 H), 1.28-1.12 (m, 1 H); used. The reaction solution was stirred at 10-20 "C for ap13CNMR (CDC1,) 6 167.9, 155.8, 145.9, 132.2, 127.1, 111.9, 110.2, proximately 10 min before quenching. An NMR spectrum of the 105.5, 104.0, 72.9,59.9,55.7,38.5,38.4,31.0,25.8,21.9, 14.5; LRMS crude extraction residue shows a mixture of 5a and 6a in a ratio ( m / z ,re1 intensity) 345 (M', 9), 248 (29), 247 (loo), 218 (30), 201 of 5:1, respectively. Chromatography of the crude extraction (26), 175 (23). Anal. Calcd for C2a27NO4: C, 69.54; H, 7.88; N, residue eluting with 4% ether in methylene chloride afforded 6a 4.05. Found: C, 69.43; H, 8.00; N, 4.02. Ethyl 2-(2-Hydroxy-2-methylpropyl)-5-methoxyindole-3- (58%) as a white solid: mp 175.0-177.0 "C; IR (KBr) 1695,1625, 1490,1460,1395,1275 cm-'; 'H NMR (CDC13)6 7.54 (d, J = 2.4 carboxylate (4b). The electrophile used was acetone. The Hz, 1H), 7.14 (d, J = 8.9 Hz, 1 H), 6.85 (dd, J = 2.4 and 8.9 Hz, extraction residue was chromatographed eluting with ethyl ace1 H), 3.87 (s, 3 H), 3.61 (s, 3 H), 2.87 (s, 2 H), 2.07-2.00 (m, 2 H), tate/hexanes (1:2) to afford 4b (83%) as a white solid: mp 1.88-1.76 (m, 2 H), 1.60-1.31 (m, 6 H); 13CNMR (CDCl,) 6 163.1, 129.0-130.0 "C; IR (CHC13) 3405,1660,1620,1585,1510,1480, 156.2,145.3, 132.5, 126.2,112.9, 110.3, 102.4, 100.9,81.3,60.4,55.9, 1380, 1170 cm-'; 'H NMR (CDCI,) 6 7.58 (d, J = 2.7 Hz, 1 H), 36.6,32.2,30.0,25.4,21.8,14.2;LRMS ( m / z re1 intensity) 300 (24), 7.19 (d, J = 8.9 Hz, 1 H), 6.88 (dd, J = 2.7 and 8.9 Hz, 1 H), 4.38 299 (M', 63), 243 (16), 202 (36), 201 (loo), 186 (22), 173 (49), 158 (9, J = 7.1 Hz, 2 H), 3.86 (e, 3 H), 3.71 (s, 3 H), 3.38 (br 2, 2 H), (19), 130 (26). Anal. Calcd for C18H2'N03: C, 72.22; H, 7.07; N, 1.44 (t, J = 7.1 Hz, 3 H), 1.31 (9, 6 H); 13CNMR (CDC13) 6 167.8, 4.68. Found: C, 72.06; H, 6.96; N, 4.58. 155.9, 146.0, 132.2, 127.1, 112.1, 110.3, 105.5, 104.1,72.4,59.9,55.7, 8-Methoxy-5-met hyl-3-phenyl-[2H]-l,4-dihydropyrano38.1,30.8,30.2,14.5; LRMS ( m / z ,re1 intensity) 306 (21), 305 (M', [4,3-b]indole (5c). 3b and benzaldehyde were used. The reaction 52), 288 (17), 260 (16), 248 (40), 247 (loo), 218 (63), 201 (60), 175 solution was stirred at 30 "C for 2 h before quenching. After (66), 131 (35), 59 (58). Anal. Calcd for Cl7HZ3NO4; C, 66.86; H, quenching, a solid precipitated. This solid was filtered and 7.59; N, 4.59. Found: C, 66.99; H, 7.68; N, 4.50. Ethyl 2-(2-Hydroxy-2-phenylethyl)-5-methoxyindole-3- triturated in methylene chloride to afford 6c (35%),which was identical in all respects with the solid directly synthesized elsecarboxylate (4c). The electrophile used was benzaldehyde. The where in this paper. The extraction residue was chromatographed extraction residue was chromatographed eluting with ethyl aceeluting with 2.5% ether in methylene chloride to afford 5c (39%) tate/hexanes (1:2) to afford 4c (79%) as a white solid: mp as a white solid: mp 224.0-225.0 "C; IR (KBr) 1705,1625,1490, 128.0-130.0 "C; IR (CHC13) 3380,1665,1620,1580,1515,1480, 1460, 1270, 1135 cm-'; 'H NMR (CDC13)6 7.59 (d, J = 2.8 Hz, 1445, 1170, 1100 cm-'; 'H NMR (CDC13)6 7.60 (d, J = 2.2 Hz, 1 H), 7.50-7.47 (br d, 2 H), 7.43-7.35 (m, 3 H), 7.20 (d, J = 8.6 1 H), 7.35-7.23 (m, 5 H), 7.12 (d, J = 9.0 Hz, 1 H), 6.87 (dd, J Hz, 1 H), 6.91 (dd, J = 2.1 and 8.9 Hz, 1 H), 5.59 (dd, J = 5.3 = 2.8 and 8.9 Hz, 1 H), 5.16-5.08 (m, 1 H), 4.43 (9, J = 7.1 Hz, and 10.9 Hz, 1 H), 3.87 (s, 3 H), 3.66 (s, 3 H), 3.26-3.10 (m, 2 H); 2 H), 4.03 (d, J = 3.6 Hz, OH), 3.87 (s, 3 H), 3.63 (dd, J = 4.3 13C NMR (CDC13)6 163.4, 156.4, 146.0, 138.8, 132.6, 128.7, 128.7, and 12.6 Hz, 1 H), 3.43 (dd, J = 6.6 and 12.6 Hz, 1 H), 3.30 (s, 126.3,126.3, 113.4, 110.5, 102.4, 101.6, 79.2,55.9, 30.2, 29.6; LRMS 3 H), 1.47 (t, J = 7.4 Hz, 3 H); 13C NMR (CDCl,) 6 167.5, 155.8, ( m / z ,re1 intensity) 308 (32), 307 (M', 69), 202 (33), 201 (1001, 145.3, 144.2, 131.9, 128.5, 127.6, 127.0, 125.6, 112.1, 110.3, 104.9, 186 (28), 173 (57), 158 (26), 130 (33), 82 (27). Anal. Calcd for 103.8, 74.2, 60.0,55.7, 36.0, 29.7, 14.6; LRMS ( m / z re1 intensity) 353 (M', 161, 248 (42), 247 (loo),232 (24), 218 (65), 201 (51), 175 (57), 79 (36). Anal. Calcd for CzlHz3N0,: C, 71.37; H, 6.56; N, (16) When applicable, liquid aldehdyes or ketones were added neat. 3.96. Found: C, 71.18; H, 6.55; N, 3.90. The general order of TLC polarity of the possible products from Ethyl 2-((l-Hydroxypiperid-4-yl)methyl)-5-methoxy- this(17) reaction was (least polar) alcohol 4 < olefin carboxylic acid 6