Induction of Inflammatory Responses in Human Bronchial Epithelial

Mar 26, 2019 - So far, how different components of PM2.5 contribute to inflammation and toxicity is still not known. To identify key PM2.5 components ...
0 downloads 0 Views 2MB Size
Subscriber access provided by EDINBURGH UNIVERSITY LIBRARY | @ http://www.lib.ed.ac.uk

Ecotoxicology and Human Environmental Health

Induction of Inflammatory Responses in Human Bronchial Epithelial Cells by Pb2+-Containing Model PM2.5 Particles via Downregulation of a Novel Long Non-Coding RNA lnc-PCK1-2:1 Xiujiao Pan, Xiaoru Yuan, Xin Li, Sulian Gao, Hainan Sun, Hongyu Zhou, Lujian Hou, Xiaowu Peng, Yiguo Jiang, and Bing Yan Environ. Sci. Technol., Just Accepted Manuscript • Publication Date (Web): 26 Mar 2019 Downloaded from http://pubs.acs.org on March 26, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 37

Environmental Science & Technology

1

Induction of Inflammatory Responses in Human Bronchial Epithelial Cells by

2

Pb2+-Containing Model PM2.5 Particles via Downregulation of a Novel Long Non-

3

Coding RNA lnc-PCK1-2:1

4

Xiujiao Pan,1 Xiaoru Yuan,1, 2 Xin Li,3 Sulian Gao,4 Hainan Sun,1 Hongyu Zhou,2

5

Lujian Hou,4 Xiaowu Peng,6 Yiguo Jiang,3, * Bing Yan,2, 5, *

6

1School

7

China.

8

2Key

9

of Education, Institute of Environmental Research at Greater Bay, Guangzhou

of Chemistry and Chemical Engineering, Shandong University, Jinan 250100,

Laboratory for Water Quality and Conservation of the Pearl River Delta, Ministry

10

University, Guangzhou 510006, China.

11

3State

12

Guangzhou Medical University, Guangzhou 511436, China.

13

4Environmental

14

5School

15

250100, China.

16

6South

17

Protection, Guangzhou 510655,China.

Key Laboratory of Respiratory Disease, Institute for Chemical Carcinogenesis,

Monitoring Center, Jinan 250102, China.

of Environmental Science and Engineering, Shandong University, Jinan

China Institute of Environmental Sciences, Ministry of Environmental

18 19

*To whom correspondence should be addressed.

20

Professor Bing Yan

21

E-mail: [email protected]

22

Professor Yiguo Jiang 1

ACS Paragon Plus Environment

Environmental Science & Technology

23

Page 2 of 37

E-mail: [email protected]

24 25

Graphic TOC

26

27 28 29 30

Abstract

31

Air-borne particular matter (PM2.5) contain complex mixtures of pollutants and

32

their compositions are also varying with time and location. Inhalation of PM2.5 may

33

cause a number of diseases, such as bronchial and lung inflammation and lung cancer.

34

So far, how different components of PM2.5 contribute to inflammation and toxicity is

35

still not known. To identify key PM2.5 components that are responsible for inflammation,

36

here we took a reductionism approach and synthesized a model PM2.5 library containing

37

20 carbon nanoparticle-based members with loadings of As (III), Pb2+, Cr (VI) and BaP

38

individually or in combination at environment relevant concentrations. We discovered 2

ACS Paragon Plus Environment

Page 3 of 37

Environmental Science & Technology

39

that only carbon nanoparticle-Pb2+ adducts, not other pollutants or adducts, induced

40

inflammation in human bronchial cells by suppressing the expression of a novel long

41

non-coding RNA lnc-PCK1-2:1, while lnc-PCK1-2:1 routinely plays a regulatory role

42

in inhibiting inflammation. This finding was further substantiated by varying Pb2+

43

loadings on carbon nanoparticles and overexpressing lnc-PCK1-2:1. The success of this

44

approach opens an avenue for further elucidation of molecular mechanisms of PM2.5-

45

induced inflammation and toxicity.

46 47

Introduction

48

Fine particulate matter with aerodynamic diameters less than 2.5 μm (PM2.5) are

49

small enough to penetrate human lungs and cross air-blood barriers. Long-term

50

exposures to PM2.5 are linked to acute lower respiratory infections,1 chronic obstructive

51

pulmonary disease,2 stroke,3, 4 ischemic heart attack5, 6 and lung cancer.7 In 2016, air

52

pollution was responsible for 7.5% of global deaths, in which China and India together

53

account for nearly half of it.8-10 Toxicological studies have shown that PM2.5 particles

54

induce cytotoxicity,11, 12 immunotoxicity,11, 12 oxidative stress13 and DNA damages in

55

human cells.13 Inflammation is a crucial trigger for most PM2.5-induced diseases.

56

However, because of the complexity of PM2.5 composition and its region- and time-

57

dependence, very little is known about how different components contribute to PM2.5-

58

induced overall inflammatory responses.

59

Inflammation induction is orchestrated by sophisticated cell signaling networks

60

involving various biomolecules such as proteins, DNA and RNA molecules.14-17 3

ACS Paragon Plus Environment

Environmental Science & Technology

Page 4 of 37

61

However, the involvement of non-coding RNAs in PM2.5-induced inflammation is not

62

well known. Noncoding RNAs are non-protein-coding transcripts. About 75-90%

63

mammalian genomes are transcribed as noncoding RNAs.18 There is growing evidence

64

that long noncoding RNAs (lncRNAs), which have more than 200 nucleotides in length,

65

contribute to the regulation of gene expression in immune cells (such as macrophages,19,

66

20

67

proteins to alter the expression of NF-κB related genes.19, 22 A lncRNA THRIL interacts

68

with hnRNPL (heterogenous nuclear ribonucleoprotein L) and regulates the expression

69

of tumor necrosis factor alpha (TNF-α) following the activation of toll-like receptor 2

70

in human monocytes.20 Our previous work has found that PM2.5 upregulated lncRNA

71

LINC00341 in 16HBE cells and induced cell cycle arrest.23 However, PM2.5-induced

72

epigenetic changes that regulate inflammation are not understood.

DCs,21 and epithelial cells22). It is reported that lncRNA-Cox2 interacts with other

73

Human bronchial epithelial (16HBE) cells participate in the initial interactions

74

with inhaled PM2.5 particles and, therefore, induce early inflammatory responses.24 In

75

this investigation, we use 16HBE as a cell model. By taking a reductionism approach

76

we synthesized a carbon nanoparticle-based model PM2.5 library of 20 members with

77

controlled loadings of pollutants either individually or in combination at environment

78

relevant concentrations. We discovered that only Pb2+-loaded model PM2.5 particles,

79

not with other tested pollutants, induced inflammation by suppressing the expression

80

of a novel long non-coding RNA lnc-PCK1-2:1.

81 82

Materials and methods 4

ACS Paragon Plus Environment

Page 5 of 37

Environmental Science & Technology

83

PM2.5 collection and analysis

84

The sampling method was reported in our previous work. Briefly, PM2.5 particles

85

were collected from city of Jinan, China, using a high volume ambient particulate

86

sampler (Tianhong Instruments, TH-150CⅢ, Wuhan, China), at an air flow rate of 100

87

L/min. After sampling, the filter membranes were cut into small pieces and soaked in

88

150 mL ultrapure H2O. The mixture was sonicated for an hour on an ice bath, then the

89

membranes were soaked in 100 mL of dimethyl sulfoxide and sonicated for another

90

hour on an ice bath. Finally, all the extract and blank particles were suspension and

91

dried in a vacuum freeze dryer. The resulting dried, gray, flocculent, particles were

92

weighed and resuspended in H2O, then placed in a refrigerator at 4°C for future use.

93

An array of techniques was used to analyzed components in PM2.5-JN. Ionic

94

chromatography (Dionex ICS-3000, MA, USA) was used to analyze water-soluble

95

components, inductively coupled plasma-mass spectrometry was used to analyze

96

inorganic metal elements, Thermal/Optical Carbon Analyzer (Desert Research Institute,

97

DRI Model 2001A, Reno, USA) was used to analyzed organic carbon/elemental carbon

98

(OC/EC), and gas chromatography-mass spectrometry (Agilent, GC-MS, 7890 A/5975

99

C, Santa Clara, USA) was used to analyzed polycyclic aromatic hydrocarbons (PAHs).

100

Synthesis of the model PM2.5 library

101

Detailed procedure for synthesizing the model PM2.5 library showed in SI. In short,

102

carbon nanoparticles carrying pollutants represent model insoluble part of PM2.5

103

particles. We synthesized a model PM2.5 library containing 20 different model PM2.5

104

particles (Table 1, 2) through different combinations of 4 pollutants. The mass fraction 5

ACS Paragon Plus Environment

Environmental Science & Technology

Page 6 of 37

105

of each pollutant loaded on model PM2.5 particles were consistent with PM2.5-JN (Cr

106

(VI): 0.14%, Pb2+: 0.60%, As (III): 0.08%, BaP: 0.10%). The concentrations of loaded

107

pollutants were 0.30 μg/mL (K2Cr2O7), 0.82 μg/mL (Pb(CH3COO)2·3H2O), 0.080

108

μg/mL (As2O3) and 0.075 μg/mL (BaP) in model PM2.5 solutions.

109

Characterization of model PM2.5 and PM2.5-JN particles

110

The morphology of model PM2.5 and PM2.5-JN particles were analyzed by

111

transmission electron microscope (TEM) (JEM-1011, JEOL, Tokyo, Japan) after a 30

112

min sonication. Hydrodynamic diameters and zeta potentials of model PM2.5 and PM2.5-

113

JN solutions (75 μg/mL) in ultrapure water (18.2 MΩ) or cell culture medium

114

supplemented with 10% fetal bovine serum were measured by a laser particle size

115

analyzer (Malvern Nano ZS, Malvern, UK).

116

LncRNA microarray

117

RNA was obtained from 16HBE cells after incubating with C, C-BaP-Cr-Pb-As,

118

or PM2.5-JN at 75 μg/mL for 48 h. Trizol reagent (Invitrogen, Carlsbad, CA, USA) was

119

used to extract total RNA according to the manufacturer’s instructions. The quality and

120

concentrations of total RNA were measured by a spectrophotometer (NanoDrop ND-

121

2000, Thermo Scientific, MA, USA).

122

Agilent Human lncRNA Microarray V6 (Agilent Technologies, Santa Clara, USA)

123

was used for lncRNA microarrays detection, and lncRNA microarray experiments were

124

completed by OE Biotechnology Company (Shanghai, China). This protocol involves

125

the transcription of total RNA into double-stranded cDNA, labeling cRNA with

126

Cyanine-3-CTP, followed by hybridizing the cRNA to the microarray. Agilent Scanner 6

ACS Paragon Plus Environment

Page 7 of 37

Environmental Science & Technology

127

G2505C (Agilent Technologies, Santa Clara, USA) was used to scan the array. An

128

analysis of the raw data was carried out by Genespring (Agilent Technologies, Santa

129

Clara, USA). Differentially expressed lncRNAs or genes were set as fold change ≥ 2.0

130

and p ≤ 0.05. Finally, hierarchical cluster analyses were performed to classify the

131

distinguishable expression patterns of lncRNAs and genes in different samples.

132

Quantitative real-time polymerase chain reaction (qRT-PCR)

133

GoscriptTM Reverse Transcription System (Promega, Madison, WI, USA) was

134

used to reverse transcribe RNAs to cDNAs. Then, qRT-PCR was carried out by

135

QuantStudioTM 5 System (Thermo Fisher Scientific, MA, USA) using Go Taq® qPCR

136

Master Mix (Promega, Fitchburg, USA). β-actin was used as an internal control to

137

normalize the expression levels. The relative expression of lncRNAs and genes were

138

quantified by the 2−ΔΔCT method.25 ΔΔCT = (CTTarget

139

(CTTarget gene - CTβ-actin)Control group. All primers were synthesized by Invitrogen (Waltham,

140

MA, USA) and sequences were listed in Table S2.

141

RNA overexpression

gene-CTβ-actin)Experimental group

-

142

Overexpression vectors of lnc-PCK1-2:1 and control empty vectors were

143

constructed by BersinBio (Guangzhou, China). BamHI and XhoI were jointly

144

connected to express vector pcDNA 3.1 through double enzyme connection.

145

Overexpression sequence of lnc-PCK1-2:1 was shown in Table S3. Cells were

146

transfected as previously reported.26 In brief, after a 15-25 min equilibration, the mixed

147

Endofectin™-Max reagent (Genecopoeia), plasmids and Opti-MEM® I Reduced

148

Serum Medium (Gibco) were added to the wells. After incubation at 37℃ with 5% CO2 7

ACS Paragon Plus Environment

Environmental Science & Technology

Page 8 of 37

149

for 6 h, the serum-free medium was replaced with fresh medium containing model

150

PM2.5 or PM2.5-JN (75 μg/mL).

151

Cell viability measurements

152

16HBE cells were cultured in minimum essential medium (MEM) (Genom,

153

Hangzhou, China) supplemented with 10% fetal bovine serum (Sijiqing, Hangzhou,

154

China), 1% penicillin-streptomycin antibiotics (Sigma-Aldrich, St. Louis, Mo, USA) at

155

37 °C with 5% CO2. The CCK-8 kit (Dojindo, Japan) was used to access relative cell

156

viability. 16HBE cells were harvested in logarithmic phase, seeded in a 96-well plate

157

with the density of 9000 cells per well. After incubation at 37℃ with 5% CO2 for 24 h,

158

medium in each well were replaced with fresh culture medium containing same or

159

different amounts of model PM2.5 or PM2.5-JN. Cells were incubated with particles for

160

48 h. The absorbance was read by a microplate reader (BioTek, Winooski, VT) at 450

161

nm after adding 10 μL per well CCK-8 solution for 1-2 h.

162

Quantification of inflammatory cytokines

163

The interleukin-6 (IL-6) and interleukin-8 (IL-8) levels in cell culture supernatants

164

were quantified by commercially available human uncoated ELISA kits (ThermoFisher

165

scientific,

166

Lipopolysaccharide (LPS) (Sigma-Aldrich, St. Louis, USA) at 400 ng/mL was used as

167

a positive control.

168

Cellular uptake

MA,

USA)

according

to

the

manufacturer’s

recommendations.

169

To study cellular uptake of particles, 16HBE cells were cultured in 12-well plates

170

at a density of 120000 cells per well for 24 h, and the solutions of particles in cell culture 8

ACS Paragon Plus Environment

Page 9 of 37

Environmental Science & Technology

171

medium (75 μg/mL) were added. After incubation for 48h at 37℃ with 5% CO2, the

172

cells were washed 3 times with phosphate buffer saline (PBS) to remove free particles.

173

The cells were then fixed in 2.5% glutaraldehyde in 0.1M sodium cacodylate buffer

174

(pH 7.4) for one hour at room temperature. After rinsing, the cells were fixed in 2%

175

osmium tetroxide containing 3% potassium ferrocyanide for one hour and rinsed.

176

Finally, the thin (70 nm) sections were cut on a Leica UC6 ultramicrotome and images

177

were taken on TEM using an AMT 2k digital camera.

178

Statistical Analysis

179

Data are presented as mean values ± s.d. of at least 3 independent determinations.

180

One-way ANOVAs followed by Tukey’s tests were used to analyze differences

181

between control and experimental groups. A P-value of < 0.05 was considered

182

significant. All statistical calculations were carried out using Sigma Plot 12.0.

183 184

Results and discussion

185

Water-insoluble PM2.5 particles are main contributors for induction of

186

cytotoxicity and inflammation

187

Components of PM2.5 include carbon, silica, inorganic and organic compounds,

188

and even biological pollutants. Some components of PM2.5, like ammonium salts,

189

sulfates, and liquid pollutants are water soluble, while others, such as carbon and silica

190

particles with adsorbed pollutants are insoluble in aqueous solution. Because PM2.5

191

particles are quickly suspended in lung fluid after inhalation, we need to know cellular

192

effects of the dissolved and insoluble parts of PM2.5 particles. The complete PM2.5 9

ACS Paragon Plus Environment

Environmental Science & Technology

Page 10 of 37

193

particles were weighed and then fully suspended in water for 24 hours. After careful

194

removal of the supernatant, the lower suspension was lyophilized and this insoluble

195

portion was weighed. The water-soluble portion was obtained by subtracting the

196

insoluble part. Our results showed that the mass ratio of insoluble and soluble

197

components of PM2.5 particles from Jinan city (PM2.5-JN) was 0.46:0.54 or roughly 1:1

198

(Figure 1A).

199

When PM2.5 particles are inhaled into respiratory systems, it is the bronchial

200

epithelial cells, rather than alveolar macrophages, that are involved in the initial

201

interactions with foreign particles and induce early inflammatory responses.24

202

Therefore, normal human bronchial epithelial (16HBE) cells were used as a cell model

203

for investigating early lung inflammation. In 16HBE cells, soluble components of

204

PM2.5-JN exhibited very low cytotoxicity, while the whole PM2.5-JN suspension

205

induced more severe cytotoxicity at both 75 and 150 μg/mL (Figure 1B), suggesting

206

that the insoluble components were the main cause of cytotoxicity. Similarly, insoluble

207

components contributed to the majority of inflammatory responses induced by PM2.5-

208

JN as evaluated by the release of inflammatory factors IL-6 and IL-8 proteins (Figure

209

1C, D). Therefore, our data demonstrated that insoluble components with the adsorbed

210

toxic pollutants are the major contributors to both cytotoxicity and inflammation

211

induced by PM2.5-JN.

10

ACS Paragon Plus Environment

Page 11 of 37

Environmental Science & Technology

212 213

Figure 1. Cytotoxicity and inflammatory responses of water-insoluble PM2.5-JN in

214

16HBE cells. (A) Weight percentage of water-soluble and water-insoluble components

215

of PM2.5-JN collected in December, 2017. (B) Water-soluble components of PM2.5-JN

216

particles are less toxic compared to the whole PM2.5-JN particles. (C, D) Water-soluble

217

parts of PM2.5-JN do not induce inflammation, unlike the whole particles. 16HBE cells

218

were incubated with solution or particle suspension at various concentrations for 48h.

219

The dotted lines represent cellular responses to the addition of cell culture medium.

220

(n=3, mean ± SD, **p