Downloaded by UNITED ARAB EMIRATES UNIV on September 8, 2016 | http://pubs.acs.org Publication Date: April 13, 1993 | doi: 10.1021/bk-1993-0527.fw001
Irradiation of Polymeric Materials
Reichmanis et al.; Irradiation of Polymeric Materials ACS Symposium Series; American Chemical Society: Washington, DC, 1993.
Reichmanis et al.; Irradiation of Polymeric Materials ACS Symposium Series; American Chemical Society: Washington, DC, 1993.
Downloaded by UNITED ARAB EMIRATES UNIV on September 8, 2016 | http://pubs.acs.org Publication Date: April 13, 1993 | doi: 10.1021/bk-1993-0527.fw001
ACS
SYMPOSIUM
SERIES
527
Downloaded by UNITED ARAB EMIRATES UNIV on September 8, 2016 | http://pubs.acs.org Publication Date: April 13, 1993 | doi: 10.1021/bk-1993-0527.fw001
Irradiation of Polymeric Materials Processes, Mechanisms, and Applications
Elsa Reichmanis, EDITOR AT&T Bell Laboratories
Curtis W. Frank, EDITOR Stanford University
James H. O'Donnell, EDITOR University of Queensland
Developed from a symposium sponsored by the Polymer Division of the Royal Australian Chemical Institute, the National Science Foundation of the United States, and the Department of Industry, Technology, and Commerce of the Australian Government
American Chemical Society, Washington, DC 1993
Reichmanis et al.; Irradiation of Polymeric Materials ACS Symposium Series; American Chemical Society: Washington, DC, 1993.
Library of Congress Cataloging-in-Publication Data
Downloaded by UNITED ARAB EMIRATES UNIV on September 8, 2016 | http://pubs.acs.org Publication Date: April 13, 1993 | doi: 10.1021/bk-1993-0527.fw001
Irradiation of polymeric materials: processes, mechanisms, and applications / Elsa Reichmanis, Curtis W. Frank, James H. O'Donnell, editors. p.
cm.—(ACS symposium series, ISSN 0097-6156; 527)
Includes bibliographical references and index. ISBN 0-8412-2662-8 1. Polymers—Effect of radiation on—Congresses. I. Reichmanis, Elsa, 1953James H. IV. Series.
. II. Frank, C. W. III. O'Donnell,
QD381.9.R3I78 1993 620.1'9204228—dc20
93-22431 CIP
The paper used in this publication meets the minimum requirements of American National Standard for Information Sciences—Permanence of Paper for Printed Library Materials, ANSI Z39.48-1984. Copyright © 1993 American Chemical Society All Rights Reserved. The appearance of the code at the bottom of the first page of each chapter in this volume indicates the copyright owner's consent that reprographic copies of the chapter may be made for personal or internal use or for the personal or internal use of specific clients. This consent is given on the condition, however, that the copier pay the stated per-copy fee through the Copyright Clearance Center, Inc., 27 Congress Street, Salem, MA 01970, for copying beyond that permitted by Sections 107 or 108 of the U.S. Copyright Law. This consent does not extend to copying or transmission by any means—graphic or electronic—for any other purpose, such as for general distribution, for advertising or promotional purposes, for creating a new collective work, for resale, or for information storage and retrieval systems. The copying fee for each chapter is indicated in the code at the bottom of thefirstpage of the chapter. The citation of trade names and/or names of manufacturers in this publication is not to be construed as an endorsement or as approval by ACS of the commercial products or services referenced herein; nor should the mere reference herein to any drawing, specification, chemical process, or other data be regarded as a license or as a conveyance of any right or permission to the holder, reader, or any other person or corporation, to manufacture, reproduce, use, or sell any patented invention or copyrighted work that may in any way be related thereto. Registered names, trademarks, etc., used in this publication, even without specific indication thereof, are not to be considered unprotected by law. PRINTED IN THE UNITED STATES OF AMERICA
Reichmanis et al.; Irradiation of Polymeric Materials ACS Symposium Series; American Chemical Society: Washington, DC, 1993.
1993 Advisory Board ACS Symposium Series
Downloaded by UNITED ARAB EMIRATES UNIV on September 8, 2016 | http://pubs.acs.org Publication Date: April 13, 1993 | doi: 10.1021/bk-1993-0527.fw001
M . Joan Comstock, Series Editor V. Dean Adams
Bonnie Lawlor
University of Nevada— Reno
Institute for Scientific Information
Robert J. Alaimo
The University of Texas at Austin
Procter & Gamble Pharmaceuticals, Inc.
Robert McGorrin
Douglas R. Lloyd
Kraft General Foods
Mark Arnold University of Iowa
Julius J. Menn
David Baker
Plant Sciences Institute, U.S. Department of Agriculture
University of Tennessee
Vincent Pecoraro Arindam Bose
University of Michigan
Pfizer Central Research
Marshall Phillips Robert F. Brady, Jr.
Delmont Laboratories
Naval Research Laboratory
George W. Roberts Margaret A. Cavanaugh
North Carolina State University
National Science Foundation
A. Truman Schwartz Dennis W. Hess
Macalaster College
Lehigh University
John R. Shapley Hiroshi Ito IBM Almaden Research Center
University of Illinois at Urbana-Champaign
Madeleine M. Joullie
L. Somasundaram
University of Pennsylvania
Ε. I. du Pont de Nemours and Company
Gretchen S. Kohl
Peter Willett
Dow-Corning Corporation
University of Sheffield (England)
Reichmanis et al.; Irradiation of Polymeric Materials ACS Symposium Series; American Chemical Society: Washington, DC, 1993.
Downloaded by UNITED ARAB EMIRATES UNIV on September 8, 2016 | http://pubs.acs.org Publication Date: April 13, 1993 | doi: 10.1021/bk-1993-0527.fw001
Foreword i H E A C S SYMPOSIUM SERIES was first published in 1974 to provide a mechanism for publishing symposia quickly in book form. The purpose of this series is to publish comprehensive books developed from symposia, which are usually "snapshots in time" of the current research being done on a topic, plus some review material on the topic. For this reason, it is necessary that the papers be published as quickly as possible. Before a symposium-based book is put under contract, the proposed table of contents is reviewed for appropriateness to the topic and for comprehensiveness of the collection. Some papers are excluded at this point, and others are added to round out the scope of the volume. In addition, a draft of each paper is peer-reviewed prior to final acceptance or rejection. This anonymous review process is supervised by the organizer^) of the symposium, who become the editor(s) of the book. The authors then revise their papers according to the recommendations of both the reviewers and the editors, prepare camera-ready copy, and submit the final papers to the editors, who check that all necessary revisions have been made. As a rule, only original research papers and original review papers are included in the volumes. Verbatim reproductions of previously published papers are not accepted M. Joan Comstock Series Editor
Reichmanis et al.; Irradiation of Polymeric Materials ACS Symposium Series; American Chemical Society: Washington, DC, 1993.