Kinetic Hydrate Inhibitor Studies for Gas Hydrate ... - ACS Publications

Nov 22, 2016 - ACS Journals. ACS eBooks; C&EN Global Enterprise .... Kinetic Hydrate Inhibitor Studies for Gas Hydrate Systems: A Review of Experiment...
0 downloads 8 Views 670KB Size
Subscriber access provided by TRAKYA UNIVERSITESI

Review

Kinetic Hydrate Inhibitor Studies for Gas Hydrate Systems – A Review of Experimental Equipment and Test Methods Malcolm A. Kelland, and Wei Ke Energy Fuels, Just Accepted Manuscript • DOI: 10.1021/acs.energyfuels.6b02739 • Publication Date (Web): 22 Nov 2016 Downloaded from http://pubs.acs.org on November 22, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Energy & Fuels is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

Kinetic Hydrate Inhibitor Studies for Gas Hydrate Systems – A Review

2

of Experimental Equipment and Test Methods

3 Wei Ke1, Malcolm A. Kelland2*

4 5 6

1

7

Stavanger, NO-4036 Stavanger, Norway

8

2

9

University of Stavanger, NO-4036 Stavanger, Norway

Department of Petroleum Engineering, Faculty of Science and Technology, University of

Department of Mathematics and Natural Sciences, Faculty of Science and Technology,

10 11

Abstract

12

Kinetic hydrate inhibitors (KHIs) have been studied, developed and used in the oil and gas

13

industry for more than two decades. The main active ingredients in commercial KHI

14

formulations are water-soluble polymers. When dosed at low concentrations (0.1–2.0 wt. %

15

active chemical) they are able to retard the gas hydrate formation process and facilitate reliable

16

oil and gas transportation. A considerable amount of research effort on KHI technologies has

17

contributed to an abundance of KHI knowledge, applications, and tailor-made solutions.

18

Whereas previous reviews have concentrated on the chemistry of KHIs, this review article has a

19

particular emphasis on the experimental equipment, hydrate detection tools and test methods

20

commonly applied in KHI investigations. The underlying mechanisms of KHIs still are not fully

1

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 54

1

understood. The major hypotheses proposed in the literature and supporting experimental and

2

computational evidence are also reviewed.

3

Keywords: petroleum, gas hydrates, kinetic hydrate inhibitors, kinetics, mechanisms

4 5 6 7

*

Corresponding author. E-mail address: [email protected] (M.A. Kelland).

2

ACS Paragon Plus Environment

Page 3 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

Introduction

2

Gas hydrates are crystalline, non-stoichiometric clathrate inclusion compounds. At the

3

microscopic level, they are composed of hydrogen-bonded water molecules as hosts and gas

4

molecules entrapped in the water cavities as guests. They are not chemical compounds since no

5

strong chemical bonds exist between the water and gas molecules. Generally, high pressures and

6

low temperatures are required for their stable existence. The gas molecules able to be

7

enclathrated into the water lattices are usually small (< 10 Å),1 such as methane, ethane, propane,

8

iso-butane, and inorganic gases including nitrogen, hydrogen, and carbon dioxide.2 Different

9

hydrate structures have been discovered. Cubic structure I (sI) and structure II (sII), and

10

hexagonal structure H (sH) are the three most common gas hydrate structures. This is determined

11

by how the hydrate unit cells are assembled at the molecular level.2

12

Since it was first reported3 as an industrial nuisance, gas hydrate formation continuously leads to

13

pipeline plugging issues during oil and gas transportation. There are three major stages of phase

14

transitions associated with hydrate plug formation, that is, nucleation,2,

15

agglomeration.6, 7 Numerous experimental investigations2, 8-16 and modeling and simulations12, 17-

16

21

17

innovations and technical improvements, hydrate formation remains the number one problem in

18

flow assurance.22 In fact, we are facing more severe technical challenges due to the formation of

19

gas hydrates than before, especially when offshore drilling activities move towards geological

20

sites of deeper waters and colder temperatures. The operational regions are often well within the

21

hydrate stability zone. An enormous expense for hydrate prevention and mitigation is associated

22

with the use of traditional thermodynamic hydrate inhibitors (THIs) such as methanol and mono 3

4

growth,2,

5

and

have contributed to the current understanding of such phase transitions. Despite scientific

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 54

1

ethylene glycol (MEG).23 In such a context, robust and economical hydrate management

2

strategies24 have become an urgent need for safe and reliable production of oil and gas.

3

To mitigate the hydrate formation and plugging issues, an important area of efforts is the

4

research and development of low dosage hydrate inhibitors (LDHIs).25 The concept was initiated

5

since the mid-1980s and early 1990s.26 Research on LDHIs has been active all the time.7, 20, 22, 24,

6

27-33

7

called so to differ from the traditional THIs based on their different hydrate inhibition

8

mechanisms. THIs shift the hydrate equilibrium to lower temperatures and higher pressures,

9

forcing the system to stay within the hydrate-free region. On the contrary, KHIs, mostly

10

polymeric compounds, delay the hydrate nucleation and/or growth and extend the hydrate

11

induction time to exceed the residence time of the reservoir fluid; AAs, mostly surfactants, allow

12

the hydrate particles to form and keep them dispersed in the reservoir fluid to generate

13

transportable slurries. For the time being, AAs are used more often than KHIs in the industrial

14

practices, especially at harsh conditions with higher subcooling, longer transportation distances,

15

or higher water-cuts. However, the research progress in recent years on KHIs has made KHI

16

technologies equally promising. Laboratory investigations into the biological KHIs34 also have

17

been going on for years. High-performance KHIs have been applied to varied fluid systems

18

including gas, condensate, and black oil.35 To mimic the real multi-phase reservoir fluid flow in

19

oil and gas pipelines, salt36-39 could be added to make saline solutions, and heptane39-42 or

20

decane43-45 could be added as a liquid hydrocarbon phase. In principle, KHIs are designed for

21

multi-phase pipeline applications, but may also be applied in other circumstances. For example,

22

KHIs may be used during drilling while exposed to the drilling fluid. In such a case, drilling

LDHIs consist of kinetic hydrate inhibitors (KHIs) and anti-agglomerants (AAs). They are

4

ACS Paragon Plus Environment

Page 5 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

mud36,

46-50

2

environment. Porous media such as silica sand51, 52 have also been tested. Hydrate formation and

3

dissociation behavior in the interstitial pores in the porous media can be very different from that

4

in the usual liquid-gas-hydrate systems. Establishment and testing of hydrate systems with one or

5

more of these components or additives is able to offer additional insights on how the selected

6

KHIs can behave in close-to-reality circumstances. Kelland53 has made a comprehensive review

7

on gas hydrate control, with special focus on the lately developed KHIs, their chemistry,

8

synthesis, and laboratory performances. A review on LDHI–KHI applications from an industrial

9

perspective was given by Klomp.35

could be added to evaluate the performance of KHIs in the deep-water drilling

10

Whereas previous reviews on KHIs have concentrated on their chemistry, this work has focused

11

on the tools and methods commonly used for experimental KHI investigations in natural gas

12

hydrate systems in the past decade. The proposed KHI inhibition mechanisms with experimental

13

and computational evidence in the literature are also reviewed. The following areas of KHI

14

research will not be considered in details in the current work: a) anti-freeze proteins (AFPs) from

15

living organisms, also called ice-structuring proteins (ISPs), and their potential as KHIs.54-60 An

16

up-to-date review of AFP studies is available by Walker et al;61 b) ionic liquids (ILs)62-64 as

17

potential KHIs. Tariq et al.65 have recently reviewed ILs-related research activities; c)

18

tetrahydrofuran (THF)66-69 or cyclopentane66,

19

cyclopentane hydrates are often used to facilitate the screening of KHIs for gas hydrate

20

inhibition, there are two major differences that are worth mentioning. First, THF and

21

cyclopentane hydrates form without the need of elevated pressures, thus not able to fully

22

represent the real conditions for gas hydrate formation. For the latter, the dissolution and

70

hydrate systems. Although THF and

5

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 54

1

diffusion of the pressurized gas into the aqueous phase is critical. Second, the actual performance

2

of KHIs on THF and cyclopentane hydrates can be different or even opposite to that on gas

3

hydrate systems due to probably different KHI working mechanisms;71 d) recycling72,

4

removal74, 75 of KHIs for future field applications; and e) compatibility studies of KHIs with

5

other types of production chemicals,76 in particular, corrosion inhibitors.77, 78 The current survey

6

remains its focus on the tools and methods of experimental KHI investigations, and experimental

7

and computational evidence for the proposed inhibition mechanisms in the literature.

8

Major KHI Categories

9

There are three main categories of KHIs developed for field applications, all of which are

73

or

10

polymeric compounds. These are:

11

• Poly-N-vinyllactam polymers, including a variety of copolymers and grafted polymers. Typical

12

examples are five-ring polyvinylpyrrolidone79 (PVP), six-ring polyvinylpiperidone80 (PVPip),

13

seven-ring polyvinylcaprolactam81 (PVCap), and eight-ring polyvinylazacyclooctanone82

14

(PVACO). Their chemical structures are shown in Figure 1. Their performances as KHIs were

15

found to improve with increasing lactam ring sizes.80, 82 Only polymers with the five- and seven-

16

rings are used in commercial KHI formulations.

17

6

ACS Paragon Plus Environment

Page 7 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

Figure 1. Typical poly-N-vinyllactam polymers with increasing lactam ring sizes. From left to

2

right: PVP (five-ring), PVPip (six-ring), PVCap (seven-ring), PVACO (eight-ring).

3 4

• Hyper-branched poly(esteramide)s.83 An illustrative structure of a hyper-branched

5

poly(esteramide) is shown in Figure 2. It is feasible to modify the tips on its molecular structure

6

to make the polymer more or less hydrophilic.84 This class of KHIs is claimed to have better

7

performance on structure-I hydrates than the VCap-based polymers.25

8

9 10

Figure 2. An example structure of a hyper-branched poly(esteramide).

11

7

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 54

1

• N-Isopropylmethacrylamide85 (IPMA) polymers and copolymers. This is another widely

2

studied KHI category. The structure of poly(N-isopropylmethacrylamide) is shown in Figure 3.

3

IPMA copolymers86 may have higher cloud points and better tolerance to saline environments.

4

5 6

Figure 3. Poly(N-isopropylmethacrylamide).

7 8

Other polymeric KHIs that have been developed and tested include pyroglutamate polymers (a

9

few field applications have been carried out),87,

88

maleic copolymers and alkylamide

10

derivatives,89 polyalkyloxazolines,90, 91 polymaleimides,92 polyallylamides,93 polyaspartamides,45,

11

94, 95

12

inorganic and traditional THI, was reported to possess kinetic inhibition properties towards

13

hydrate formation in porous media.52 However, it appears to only slow down the growth rate of

14

hydrate formation and has no effect on the induction time. An introductory overview of KHIs

15

was given by Erfani et al.98 With abundant details and a special focus on the chemistry, the

16

structure, functional groups, and synthesis processes, Kelland25, 53, 84 has made comprehensive

17

reviews on all categories of KHIs along with their histories of development. A general guideline

18

for developing a polymeric KHI is that a certain level of hydrophobicity should be reached for

modified starch and starch derivatives96, 97, and proteins61. Recently, sodium chloride, an

8

ACS Paragon Plus Environment

Page 9 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

the KHI to effectively disrupt the water structures, while it has to remain water soluble to get into

2

the liquid system.

3 4

Experimental Apparatus for Testing of KHIs

5

Experimental device for testing and screening of KHIs for gas hydrate systems, from laboratory

6

scale to pilot scale, have evolved over years. The most commonly used apparatus include

7

autoclave, rocking cell, stirred reactor, batch or semi-batch crystallizers, automated lag time

8

apparatus (HP-ALTA), and (micro) differential scanning calorimetry (DSC or µ-DSC), pipe-

9

wheel, and flow loop. A brief description of each is given below, accompanied with a list of

10

apparatus and selected research groups who often apply them is given in Table 1.

11 12

Table 1. Apparatus/reaction vessels used in gas hydrate studies in the presence of KHIs.

13 14

The selection of a proper experimental apparatus largely depends on the purpose and perspective

15

of the study. The quality and convenience of data collection are also priorities for consideration.

16

Autoclaves, crystallizers, and other types of stirred reactors are frequently used in gas hydrate

17

studies with adjustable agitation strength and pressure and temperature monitoring. Semi-batch

18

autoclaves or semi-batch crystallizers could be considered, when adding components or taking

19

samples for analysis along the process is required. Stainless steel and titanium are common

20

materials for construction of the cell body, allowing varied designs of the inner volume, the cell 9

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 54

1

geometry, and the pressure grading. Sapphire cells often provide high pressure grading and the

2

possibility to mount a window on the cell body for visual inspection of the hydrate formation

3

process. Rocking cells were first introduced by Shell oil company. Commercial equipment with

4

several steel cells mounted in parallel, or up to 20 sapphire cells (which are particularly useful

5

for studying LDHI anti-agglomerants where visual data is critical) are now available. This gives

6

the researcher access to multiple results in the same cooling unit in the same time that it takes to

7

run an autoclave, with at least as good reproducibility and reliability. Autoclaves and rocking

8

cells that can be used for sour natural gas mixtures (containing H2S) are also available. Rocking

9

cells are especially suitable for fast screening of KHI candidates under continuous cooling by

10

recording hydrate formation temperatures. Video cameras, high-resolution digital cameras, or

11

microscopes with CCD could be mounted or connected to the high-pressure cells to allow real

12

time photo and video recordings. Specially engineered PVT cells could also be used to study the

13

three-phase properties of water, gas, and hydrate with accurate monitoring of the system

14

pressure, temperature, and reaction volume. Compared to other types of reaction vessels, HP-

15

ALTA and HP-micro DSC have the advantage of being especially suitable for conducting a large

16

number of experimental series. They both take small sample volumes (about 1 ml or less) and the

17

same sample could form hydrates, then melted, for repeated times. The sample transparency

18

reflected by the passing light beam (ALTA), or the heat transfer measured by the differential

19

scanning calorimetry (DSC), leads to reliable and accurate detection of the hydrate onset point.

20

Hydrate equilibrium cell is another type of high-pressure cell that normally allows visual

21

inspection through sapphire windows. Sealed glass ampoules are less common reaction vessels

22

in hydrate studies. They could be used to evaluate the performance of selected KHIs and can

23

operate collectively with advanced monitoring techniques such as the NMR spectroscopy. 10

ACS Paragon Plus Environment

Page 11 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

The vertical placed pipe-wheel or loop-wheel and the horizontal flow loop of varied sizes are the

2

two types of apparatus often used for industrial pilot-scale KHI evaluations under simulated field

3

conditions. They could be used when the KHI candidates have passed the preliminary lab-scale

4

tests and need to be further examined in the industrial multi-phase flow situations. The

5

pressurized and rotating pipe-wheel in a cooling chamber usually has an inner diameter (i.d.) of

6

1-3 inches, with an optional window for visual observation. For instance, Urdahl and co-

7

workers99, 100 from Statoil and SINTEF adopted a high-pressure stainless steel wheel to study gas

8

hydrate formation and inhibition. The wheel with a video camera on a Perspex window could

9

rotate at a constant angular velocity, and was equipped with sensors for monitoring pressure,

10

temperature, and torque exerted on the wheel. One advantage of the wheel is that there is no need

11

for a pump to move liquids around, as is usually necessary in a horizontal flow loop. Some

12

pumps can affect the consistency of hydrate particles, which is more of a problem for testing

13

LDHI anti-agglomerants.

14

Bench-top horizontal “wheels” have also been developed for studying LDHIs. The first such

15

high pressure wheel used a magnet to move fluids around the pipe, avoiding rotation of the

16

wheel.101 Rotation in another bench-top wheel design was avoided by using the Euler movement

17

to provide fluid movement in the pipe.102

18

A simple horizontal flow loop can be built to study THF hydrates at atmospheric pressure with

19

limited scope of use.103 Most high-pressure flow loops used today are built to study hydrates in

20

systems consisting of natural gas, condensate or oil, and water, in the presence or absence of

21

hydrate inhibitors. The inner diameter of a flow loop could vary from ¼ inch (mini loop) to 4

22

inches or larger. For example, Reed et al.104 and Talley et al.105 from Exxon Upstream Research 11

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 54

1

Company constructed stainless steel hydrate flow loops with ½ and 4 inches in i.d. to evaluate

2

kinetic hydrate inhibitors. Talley, and other co-workers utilized the ½-inch mini-loop (about 3 m

3

long, with a transparent section for visual observation) and performed a series of KHI studies in

4

the mid-1990s.106

5

This led to the filing of multiple patents on several classes of polymers containing amide groups,

6

including poly(N-alkylacrylamide)s and polyvinylamides.90, 92, 93, 107-110 Klomp and co-workers at

7

Shell first utilized a flow loop with ¼ inch in i.d. and 16 m in length to study PVP and butylated

8

PVP,111 and later used a larger loop with ¾ inch in. i.d. and 108 m in length in their studies of a

9

hyperbranched poly(esteramide).83 Shell also carried out a field trial in Michigan with PVP using

10

a flow loop with 3 inch in i.d. and a total length of around 2.5 km, where PVP failed to prevent

11

hydrate formation at 10 °C or higher subcoolings.112 Sinquin and co-workers at Institut Francais

12

du Petrole (IFP) in their initial search of effective KHIs used a pilot loop with 0.3 inch in i.d. and

13

about 6 m in length as the experimental apparatus. They filed patent applications on two novel

14

polymeric KHIs, whose performances were moderate and no better than PVP.113, 114 Palermo et

15

al.115 at BP commissioned their KHI studies with the IFP loop at Solaize (2 inch in i.d. and 140

16

m in length) in the late 1990s. Peytavy et al at TOTAL constructed a flow loop with 1 inch in i.d.

17

and 35.6 m in length and used it for KHI studies with increased repeatability when applying a

18

special in-house operation protocol using water formed from melted hydrates.116

19

To conclude this section of the review, with the large variance in the available experimental

20

apparatus for gas hydrate and KHI studies, there are several considerations to make in the

21

selection and operation of the hydrate formation vessels. These include the cost of construction,

22

the design of geometry and stirring vortex, other flow regimes obtainable, the inner volume and 12

ACS Paragon Plus Environment

Page 13 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

pressure grading, the ease of operation, maintenance and repair, and not the least, the

2

convenience of data collection and the possibility of connecting to external monitoring and

3

characterizing devices.

4 5

Other Monitoring and Characterizing Techniques

6

With an appropriate experimental apparatus in place where hydrate formation and dissociation

7

could occur, we need auxiliary monitoring and characterizing techniques to have the whole

8

process under control and have the experimental data properly recorded for analysis. Depending

9

on the aim of study, pressure and temperature transducers for recording of the P/T profiles, and

10

occasionally, cell windows for visual inspection, may or may not be sufficient. More advanced

11

techniques have been frequently involved for specifically monitoring those system variables of

12

interest and facilitating the data collection. Examples include the applications of viscometer,

13

microscope with video camera or CCD, gas chromatography (GC), Raman spectroscopy,

14

infrared (IR) spectroscopy, powder X-ray diffraction (PXRD), nuclear magnetic resonance

15

(NMR), magnetic resonance imaging (MRI), and neutron diffraction. These specialized

16

techniques are powerful in gaining further insights, either at the macroscopic level such as

17

hydrate particle morphology and fluid viscosity, or at the microscopic level such as hydrate-

18

water interactions, polymer structures, and the identification of molecules. A short description of

19

these techniques with references demonstrating how they were applied in hydrate and KHI

20

studies is given in Table 2. The differential scanning calorimetry (DSC) has also been listed here

21

as a monitoring technique, since it offers a place for sampling tubes and measures the heat

22

exchange during hydrate formation. 13

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 54

1 2

Table 2. Monitoring & characterizing techniques frequently used in gas hydrate and KHI studies.

3 4

Experimental Methods for Evaluation of KHI Performance

5

Even for the same experimental apparatus and the same monitoring techniques, there is a variety

6

of experimental procedures to choose from when performing laboratory KHI performance

7

investigations. There is currently no standard test procedure for the screening and evaluation of

8

KHI performances. Results from different laboratories with different equipment and testing

9

procedures are not always exchangeable or transferable. Depending on the type of equipment and

10

the purpose of study, a careful selection of experimental method and procedure is critical for

11

convincing evaluations. Table 3 summarizes the most commonly used laboratory procedures for

12

conducting experimental investigations on gas hydrate systems, in the presence or absence of

13

KHIs.

14

All KHI experiments under pressure require loading the test equipment with at least hydrate-

15

forming gas and aqueous fluid, and maybe also liquid hydrocarbons. However, sometimes

16

reports on KHI studies lack an important detail in the experimental information that can affect

17

the performance. An example is the time between when the KHI test solution is made and the

18

start of the experiment. Particularly if the solution contains long polymer chains and the polymer

19

cloud point is low, solution equilibrium may not be reached as the polymer has not had time to

20

fully unravel and fully interact with the aqueous phase. Another detail that can affect the KHI

21

result is whether pressurization of the system was carried out before or after cooling in an 14

ACS Paragon Plus Environment

Page 15 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

isothermal test. Another detail that affects KHI performance is the percentage liquid volume in

2

the test equipment.117

3

Table 3. Experimental procedures commonly applied in gas hydrate studies and testing of KHIs.

4

Among the experimental procedures listed in Table 3, induction time measurements under the

5

isothermal or isothermal-isobaric conditions stabilize the hydrate system at the set temperature

6

and pressure before the start of an experiment. The results of a series of experiments could be

7

compared with a same degree of subcooling (as an approximation for the nucleation driving

8

force118, 119). This facilitates the study of nucleation mechanisms and the effects of KHIs on the

9

kinetics of hydrate nucleation and growth. After the start of hydrate onset, the system pressure

10

will either decrease (isothermal) due to the consumption of gas components during hydrate

11

formation, or maintain constant (isothermal-isobaric) with continuous gas supply. Formation

12

temperature measurements with the constant cooling procedure, isobaric or not, fits well the

13

purpose of fast KHI screening and has been used intensively for preliminary evaluations of a

14

large number of KHI candidates.53 In both cooling experiments, the first sign of pressure drop

15

that is not due to the drop in temperature is taken as the earliest evidence of hydrate formation.

16

However, true nucleation may have occurred sometime before but was undetected on the

17

macroscopic scale. The same is also true of the first sign of pressure drop in an isothermal

18

experiment, assuming pressure drop due to gas dissolution in the liquid phases has reached

19

equilibrium. The isobaric constant cooling sequence mimics well the cooling process during the

20

oil and gas pipeline transportation. The temperature ramping procedure with the monitoring of

21

formation temperatures has the advantage of intermediate stabilization of the tested sample with

22

short isothermal intervals in between. The above procedures of induction time measurements and 15

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 54

1

formation temperature measurements have been compared10, 120 to examine their equivalence in

2

data collection and analysis for the highly stochastic hydrate nucleation process. The sudden

3

cooling procedure121 is a variant of the constant cooling procedure. It allows the reactor to cool

4

down gradually into the hydrate region after the water jacket surrounding the reactor is cooled

5

down in a very short time. Cooling-heating cycles take advantage of the memory effect42, 122 that

6

hydrate reformation is facilitated due to the existence of residual water structures or semi-cages

7

in the solution. By doing this, the reproducibility of experimental data is expected to improve as

8

compared to fresh water nucleation. This procedure has been developed into the hydrate

9

precursor method by Duchateau and co-workers.123, 124 They melted the formed hydrates just a

10

few degrees of centigrade above the equilibrium temperature for a limited period of time. In this

11

manner, the water history would be preserved. The cooling-heating cycle procedure bears other

12

names such as the precursor constant cooling procedure,125 or the superheated hydrate melting

13

method.44 Other effective ways to reduce the data scattering and improve the reproducibility

14

include utilizing the ice-memory effect,126 adding external impurities39 as heterogeneous

15

nucleation sites, and using water-in-oil emulsion127 for hydrate formation.

16

Two or more of the above-mentioned procedures could be applied collectively and the results

17

from different procedures could be compared.10,

18

examined the equivalence of the isothermal and constant cooling procedures in data collection

19

during the hydrate formation process. They found several differences although the nucleation

20

data collected by either procedure could well represent the stochastic nature of hydrate

21

nucleation. A general trend is that with the constant cooling procedure hydrate formation

22

becomes less stochastic with less scattered data points than that under constant temperature.2

120, 128

Wu et al.120 and Kulkarni et al.10

16

ACS Paragon Plus Environment

Page 17 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

This is probably because both the critical nuclei size and the free energy barrier of nucleation

2

would decrease along the cooling sequence (i.e. increasing degree of subcooling).4 As a result,

3

studies performed at isothermal conditions usually require many experimental parallels in order

4

to collect representative data. On the other hand, at isothermal conditions, the gas solubility

5

would remain the same while during cooling or cooling ramps the gas solubility increases with

6

decreasing temperatures. When cooling proceeds, the system requires an increasing amount of

7

dissolved gas to attain a sufficient supersaturation level for nucleation.120 At moderate to fast

8

cooling rates, it is no longer reasonable to assume quasi-steady states and the analysis of the

9

formation temperature data could become difficult due to the varying levels of the

10

supersaturation. A similar situation could occur if the system is pressurized at the room

11

temperature instead of the experimental temperature. For high-solubility gases such as carbon

12

dioxide and hydrogen sulfide, the chosen pressurizing/cooling procedure may lead to a giant

13

difference in the resulted experimental data. Although the cooling and temperature ramping

14

procedures seem to be less labor intensive for data collection, the induction time data measured

15

at isothermal conditions are usually more accurate and easier to analyze.10

16

Specifically designed for the fast screening of KHIs, a more recent crystal growth inhibition

17

(CGI) test method has drawn increasing interest from the oil and gas industry. Tohidi’s group129

18

took the concept of the hydrate precursor method one step further. Their standardized CGI

19

method offers a convenient tool for evaluation of KHI performances. The idea is to bypass the

20

stochastic nucleation process by purposely retaining a small yet measurable fraction of the

21

hydrate particles in the system. This is followed by cooling the system into the hydrate region to

22

observe the further growth of the existing hydrate crystals. As a result, any observed growth 17

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 54

1

behavior would be solely associated with the performance of the tested KHIs on hydrate growth.

2

Intriguingly, there exists clear boundaries of varied growth inhibition regions when such systems

3

are tested upon increasing degrees of subcooling. Figure 4 illustrates the concept of the CGI

4

method with distinctive growth inhibition regions.

5 6 7

Figure 4. Determination of the crystal growth inhibition (CGI) test method129 for evaluation of

8

KHI performance.

9 10

As shown in Figure 4, the inhibition performance of individually tested KHIs by the CGI method

11

can be mapped out as three identifiable growth inhibition regions that correspond to the 18

ACS Paragon Plus Environment

Page 19 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

increasing degrees of subcooling (from right to left). They are termed the complete inhibition

2

region (CIR) where the applied subcooling level is fully suppressed and no hydrate forms, the

3

slow growth region (SGR) with slow to moderate growth rates of hydrate particles, and the rapid

4

growth region (RGR) with fast and catastrophic hydrate growth, respectively. The rightmost

5

SDR region marked in Figure 4 refers to the slow dissociation region. As Svartaas et al.130

6

observed earlier for methane-propane hydrate, the hydrate dissociation rate reduced significantly

7

in the presence of tested KHIs. This is because the polymer bonding would contribute to the

8

stabilization of the formed hydrates, and consequently, the increase of hydrate dissociation

9

temperature. The CGI method has been successfully applied to quantitatively evaluate the

10

performance of KHI candidates.131-134 An apparent advantage is that it can test KHI

11

performances with the worst-case scenarios under flowing or shut-in conditions, when a small

12

fraction of hydrates may already be present.131

13

Hase et al.135 compared the varied experimental procedures including the isothermal, constant

14

cooling, and the CGI methods by examining the behaviors of hydrate formation in the presence

15

of five VP/VCap-based polymers using autoclave and rocking cell as the reaction vessels. Their

16

results suggested a following testing order for the evaluation of KHIs. First, the constant cooling

17

procedure could be applied for pre-screening and elimination of poor KHIs. Then, the CGI

18

method could be adopted to further distinguish among the best performers. Finally, the

19

isothermal induction time measurements can be utilized for verification of the most promising

20

KHIs.

19

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 20 of 54

1

KHI Mechanisms–Experimental and Computational Evidence

2

A large amount of experimental studies on KHIs has enriched our understanding of the gas

3

hydrate systems and the effects of various KHIs on gas hydrate formation. During the last two

4

decades computational modeling and simulations, in particular, the molecular dynamics (MD)

5

and Monte-Carlo (MC) simulations have become more developed and have been used to study

6

KHI mechanisms. Used correctly, they can offer insights into the mechanisms operating by

7

simulating and revealing the KHI-water-hydrate interactions at the molecular level. These

8

computational simulations have shown agreements with experimental studies,136 although they

9

may also give different or even opposite indications as those suggested by experiments.137 Thus,

10

although modeling and simulation results can be informative, conclusions from such studies need

11

to be verified by laboratory experimental investigations.

12

Kinetic inhibition is well known for other crystals than clathrate hydrates. For example, scale

13

inhibitors for the inhibition of calcium carbonate and barium sulfate, are presumed to inhibit

14

either nucleation or crystal growth, or both.25 KHIs are also presumed to operate by one or both

15

of these mechanisms.

16

The crystal growth inhibition mechanism involves adsorption of the inhibitor onto some part of

17

the growing hydrate crystal surface, altering the morphology and/or lowering the rate of crystal

18

growth. However, there is no reason why this mechanism is confined to crystals, i.e. particles

19

that have reached the critical nucleus size at which point the change in Gibbs free energy (∆G) is

20

negative for spontaneous growth. It is just as likely that adsorption of inhibitors can occur on

21

sub-critical hydrate nuclei also. For gas hydrates this therefore becomes a nucleation inhibition

22

mechanism with short direct interactions between the KHI and hydrate surfaces. A second 20

ACS Paragon Plus Environment

Page 21 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

mechanism involves more long-range water perturbation effects whereby the KHI destabilizes

2

nuclei formation, preventing sufficient particle growth and clustering to occur to reach the

3

critical nucleus size. Other mechanisms proposed include deactivation of gas hydrate hetero-

4

nucleation sites and enclathration of dissolved hydrate-forming molecules in the water phase

5

rendering them unavailable for hydrate formation. Kuznetsova et al.138 suggested that KHI

6

polymers modified the interfacial tension of the water-methane surface, converting the initially

7

dispersed methane phase into separated bubbles, and then built a system-wide network that

8

partially covered the surface of the methane bubbles.

9

The first KHI mechanism to find experimental support was the crystal growth inhibition. Studies

10

on tetrahydrofuran (THF) hydrate crystal growth proved that polymers such as poly(N-vinyl

11

caprolactam) (PVCap) adsorbed to the growing hydrate crystal surface, perturbing the normal

12

crystal morphology and/or inhibiting further growth.139, 140 Examples of gas hydrate experimental

13

studies in favor of the adsorption–inhibition mechanism include work by Posteraro et al.141 and

14

Ivall et al.142 who both studied the effect of PVP on sI methane hydrate formation. Evidence for

15

surface adsorption of KHI polymers on gas hydrates has also been obtained from neutron

16

scattering experiments.143

17

Rojas González71 examined the effects of various N-vinyl lactam polymers on sII hydrate of a

18

natural gas mixture. They found that the adsorption of KHIs was directly related to their

19

effectiveness of hydrate inhibition. Interestingly, two polymers that showed the worst and the

20

best inhibition performances for THF hydrates respectively, exhibited the opposite inhibition

21

performances for gas hydrates. These observations have been seen in many other studies. For

22

example, Shell’s work in the early 1990’s and later work by Kelland showed that quaternary 21

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 22 of 54

1

ammonium and phosphonium salts are excellent THF hydrate crystal growth inhibitors but have

2

very little effect as gas hydrate KHIs when used alone.144, 145 In contrast, some polymers, such as

3

poly(esteramide)s and poly(N-alkylacrylamide)s are fairly poor THF hydrate crystal growth

4

inhibitors yet show good performance as sII-forming gas hydrate KHIs.146 This indicates that

5

KHI evaluations using THF hydrate crystal growth systems alone need to be verified on high

6

pressure using gas hydrate systems to include possible nucleation inhibition.

7

Ohno et al.147 studied the effect of PVCap on methane-ethane hydrate and observed a structural

8

interconversion between sI and sII. They claimed that the polymer adsorption had contributed to

9

the gas and water rearrangement at the crystal interfaces, which eventually led to the structural

10

conversion. Various computer molecular simulation studies have also provided evidence for

11

hydrate surface adsorption by KHI polymers.139, 143, 148-150

12

The most studied class of KHI polymers are those based on N-vinyl lactams. Several studies

13

indicate that both nucleation and crystal growth inhibition mechanisms are operating with this

14

polymer class.47, 126, 132 In many gas hydrate KHI studies it is impossible to differentiate between

15

nucleation and crystal growth inhibition. However, there is experimental support for the

16

nucleation inhibition mechanism by water perturbation, where it can be differentiated from

17

mechanisms involving hydrate particle surface adsorption. For example, Chua and Kelland151

18

showed that the KHI performance on a sII gas hydrate system of a 1:1 weight mixture of tetra(n-

19

hexyl)ammonium bromide (THexAB) and PVCap gave very similar performance to PVCap

20

blended with tetra(n-pentyl)ammonium bromide (TPAB) and much better performance than

21

PVCap blended with tetra(n-butyl)ammonium bromide (TBAB). However, as THF hydrate

22

crystal growth inhibitors, TPAB is by far the superior inhibitor of the three, followed by TBAB, 22

ACS Paragon Plus Environment

Page 23 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

with THexAB being a very poor inhibitor. This suggests that the synergistic enhancement by

2

THexAB is not related to crystal growth inhibition but by some other mechanism. The authors

3

surmise that the long hydrophobic n-hexyl groups in THexAB cause enhanced water perturbation

4

relative to the other quaternary ammonium salts, improving the hydrate nucleation inhibition.

5

Perturbation of the bulk water phase causing nucleation inhibition has been suggested to occur

6

for KHI polymers where they have been shown to give relatively poor THF hydrate crystal

7

growth inhibition relative to good growth inhibitors such as PVCap. This includes

8

polyesteramides, polyaspartamides and polyalkyl(meth)acrylamides. Exxon Mobil was the first

9

to imply nucleation inhibition by water-perturbation in their work on the latter of these polymer

10

classes.25, 84, 108

11

There is also computer molecular simulation evidence for hydrate nucleation inhibition by KHIs.

12

Moon et al.18 showed that PVP molecules were held a distance of 5–10 Å from the crystal

13

surface, instead of adsorbing directly onto the growing crystal planes, yet hydrate formation was

14

destabilised. Kvamme et al.152 evaluated the effects of N-vinyl lactam polymers on sI and sII

15

hydrates with molecular dynamics simulations. The results showed that the KHIs could interact

16

with the hydrate-water clusters and trigger nuclei dissolution without having direct contact.

17

Hawtin

18

poly(dimethylaminoethylmethacrylate) (PDMAEMA) on methane hydrate formation. They

19

showed that the polymer had long-range effects in solution that perturbed the water structures.

20

Monte-Carlo simulations by Wathen et al.154 indicated that PVP could either inhibit or promote

21

sII hydrate formation when the polymers were within the working distance to the embryo

22

surfaces. Promotion of hydrate formation is also observed for N-vinyl lactam polymers on THF

and

Rodger153

with

MD

simulations

studied

the

effect

of

23

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 24 of 54

1

hydrate, whereby accelerated plate growth is observed below the total inhibition concentration.80,

2

139

3

Unlike experimental studies, the limited computational capacity poses a challenge to the current

4

modeling and simulation studies. Only a confined simulation module with a limited number of

5

molecules (typically, a few hundred to several tens of thousand) can be established and simulated

6

for a limited period of time (typically, a few hundred nanoseconds to a few microseconds).155, 156

7

It partly explains why the formation of the structurally simpler sI methane hydrate is most often

8

simulated for the evaluation of KHI performance. However, with increased computational

9

capacity and complexity, future molecular modeling and simulations will become more powerful

10

and offer more insights into the gas hydrate phenomena and the effects of KHIs.

11 12

Conclusion

13

Kinetic hydrate inhibitors (KHIs) as a main category of the low dosage hydrate inhibitors

14

(LDHIs) are actively in use for hydrate prevention and mitigation in the petroleum industry in

15

the past two decades. Various chemicals that act as KHIs, mostly polymeric compounds, are

16

capable of retarding gas hydrate formation at low concentrations and facilitating smooth and

17

reliable oil and gas transportations. This article with literature survey has reviewed the most

18

commonly used experimental apparatus, monitoring and characterizing techniques, and

19

experimental methods for conducting KHI-related gas hydrate studies. The major kinetic

20

inhibition mechanisms proposed in the literature and supporting experimental and computational

21

evidence are also reviewed. More research is crucial for developing better or greener KHIs, 24

ACS Paragon Plus Environment

Page 25 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

understanding their working mechanisms, and optimizing test methods for increasing the number

2

of field applications.

3 4

Acknowledgements

5

The authors thank the Norwegian Ministry of Education and Research and University of

6

Stavanger for their financial support of this work.

7 8

References

9

1.

Sum, A. K.; Koh, C. A.; Sloan, E. D., Clathrate Hydrates: From Laboratory Science to

10

Engineering Practice. Ind. Eng. Chem. Res. 2009, 48 (16), 7457-7465.

11

2.

12

2008.

13

3.

14

Ind. Eng. Chem. 1934, 26, 851-855.

15

4.

16

Oxford, 2001.

17

5.

18

Phase Equilib. 2001, 185 (1–2), 65-75.

19

6.

20

Colorado School of Mines Golden, CO, 2005.

Sloan, E. D.; Koh, C. A., Clathrate Hydrates of Natural Gases. Third ed.; CRC Press:

Hammerschmidt, E. G., Formation of Gas Hydrates in Natural Gas Transmission Lines.

Mullin, J. W., Chapter 5: Nucleation. In Crystallization, 4 ed.; Butterworth Heinemann:

Freer, E. M.; Selim, M. S.; Sloan, E. D., Methane Hydrate Film Growth Kinetics. Fluid

Turner, D. J. Clathrate Hydrate Formation in Water-in-oil Dispersions. PhD Thesis,

25

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 26 of 54

1

7.

Sloan, E. D., Hydrate Engineering. Society of Petroleum Engineers: Richardson, Texas,

2

2000; Vol. 21.

3

8.

4

of Methane Hydrate Formation in a Stirred Tank Reactor by in situ Raman Spectroscopy. Energy

5

Technol. 2015, 3 (9), 925-934.

6

9.

7

Further Insights into Their Mechanisms. Fuel 2014, 117, 442-449.

8

10.

9

Nucleation Kinetics from Induction Times and Metastable Zone Widths. Cryst. Growth Des.

Lee, J. M.; Cho, S. J.; Lee, J. D.; Linga, P.; Kang, K. C.; Lee, J., Insights into the Kinetics

Fandino, O.; Ruffine, L., Methane Hydrate Nucleation and Growth from the Bulk Phase:

Kulkarni, S. A.; Kadam, S. S.; Meekes, H.; Stankiewicz, A. I.; ter Horst, J. H., Crystal

10

2013, 13 (6), 2435-2440.

11

11.

12

Cooling Rate and Composition. Energy Fuels 2011, 25, 42 - 51.

13

12.

14

thesis, Technical University of Denmark, 2010.

15

13.

16

Stavanger, Stavanger, Norway, 2011.

17

14.

18

the Morphology and Growth Kinetics of Hydrate Films. Sci Rep. 2014, 4.

19

15.

20

Oklahoma, USA, 1997.

21

16.

22

Dissociation Behavior of Gas Hydrates at Low Temperature. In Proceedings of the 4th

23

International Conference on Gas Hydrates, Yokohama, Japan, 2002.

Abay, H. K.; Svartaas, T. M., Multicomponent Gas Hydrate Nucleation: The Effect of the

Jensen, L. Experimental Investigation and Molecular Simulation of Gas Hydrates. PhD

Abay, H. K. Kinetics of Gas Hydrate Nucleation and Growth. PhD thesis, University of

Li, S.; Sun, C.; Liu, B.; Li, Z.; Chen, G.; Sum, A. K., New Observations and Insights into

Makogon, Y. F., Hydrates of Hydrocarbons. PennWell Publishing Company: Tulsa,

Ebinuma, T.; Takeya, S.; Chuvilin, E. M.; Kamata, Y.; Uchida, T.; Nagao, J.; Narita, H.,

26

ACS Paragon Plus Environment

Page 27 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

17.

Yuhara, D.; Barnes, B. C.; Suh, D.; Knott, B. C.; Beckham, G. T.; Yasuoka, K.; Wu, D.

2

T.; Sum, A. K., Nucleation Rate Analysis of Methane Hydrate from Molecular Dynamics

3

Simulations. Faraday Discuss. 2015, 179, 463-474.

4

18.

5

Insights from Simulation. Faraday Discuss. 2007, 136, 367-382.

6

19.

7

of sI Methane Hydrate. J. Phys. Chem. B 2006, 110 (32), 15896-15904.

8

20.

9

Model of Hydrate in Multiphase Flow: From Laboratory Measurements to Field Applications.

Moon, C.; Hawtin, R. W.; Rodger, P. M., Nucleation and Control of Clathrate Hydrates:

Vatamanu, J.; Kusalik, P. G., Molecular Insights into the Heterogeneous Crystal Growth

Sum, A. K.; Koh, C. A.; Sloan, E. D., Developing a Comprehensive Understanding and

10

Energy Fuels 2012, 26 (7), 4046-4052.

11

21.

12

art and Future Directions. Chem. Eng. Sci. 2008, 63 (8), 2007-2034.

13

22.

14

Professional Publishing: New York, 2011.

15

23.

16

2003, 426, 353-363.

17

24.

18

Chem. Eng. Data 2015, 60 (2), 437-446.

19

25.

20

Fuels 2006, 20 (3), 825-847.

21

26.

22

Inhibitors for Natural Gas Hydrates. Chem. Eng. Sci. 1996, 51 (8), 1221-1229.

Ribeiro Jr, C. P.; Lage, P. L. C., Modelling of Hydrate Formation Kinetics: State-of-the-

Sloan Jr, E. D.; Koh, C.; Sum, A. K., Natural Gas Hydrates in Flow Assurance. Gulf

Sloan, E. D., Fundamental Principles and Applications of Natural Gas Hydrates. Nature

Kinnari, K.; Hundseid, J.; Li, X.; Askvik, K. M., Hydrate Management in Practice. J.

Kelland, M. A., History of the Development of Low Dosage Hydrate Inhibitors. Energy

Lederhos, J. P.; Long, J. P.; Sum, A.; Christiansen, R. L.; Sloan, E. D., Effective Kinetic

27

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 28 of 54

1

27.

Vijayamohan, P.; Majid, A.; Chaudhari, P.; Sloan, E. D.; Sum, A. K.; Koh, C. A.;

2

Dellacase, E.; Volk, M., Hydrate Modeling & Flow Loop Experiments for Water Continuous &

3

Partially Dispersed Systems In Proceedings of the Offshore Technology Conference, Houston,

4

Texas, 2014.

5

28.

6

Solutions to the Old Problem of Gas Hydrates? Energy Fuels 2012, 26 (7), 4053-4058.

7

29.

8

with a Perspective on Flow Assurance. Energy Fuels 2012, 26 (7), 4145-4157.

9

30.

Creek, J. L., Efficient Hydrate Plug Prevention. Energy Fuels 2012, 26 (7), 4112-4116.

10

31.

Huo, Z.; Freer, E.; Lamar, M.; Sannigrahi, B.; Knauss, D. M.; Sloan, E. D., Hydrate Plug

11

Prevention by Anti-agglomeration. Chem. Eng. Sci. 2001, 56, 4979-4991.

12

32.

13

Plugs. In Annals of the New York Academy of Sciences—Gas Hydrates: Challenges for the

14

Future, Holder, G.; Bishnoi, P., Eds. New York Academy of Sciences: New York, 2000; Vol.

15

912, pp 294-303.

16

33.

17

Hydrate Plugs—Field Trial at Tommeliten In Proceedings of the 76th annual meeting of the Gas

18

Processors Association (GPA), Gas Processors Association, Tulsa, OK: San Antonio, TX, USA,

19

1997.

20

34.

21

Inhibitors. PhD. Thesis, University of British Columbia, 2014.

Tohidi, B.; Anderson, R.; Chapoy, A.; Yang, J.; Burgass, R. W., Do We Have New

Shippen, M.; Bailey, W. J., Steady-State Multiphase Flow—Past, Present, and Future,

Austvik, T.; Li, X.; Gjertsen, L., Hydrate Plug Properties—Formation and Removal of

Austvik, T.; Hustvedt, E.; Gjertsen, L. H.; Urdahl, O., Formation and Removal of

Sharifi, H. Laboratory Evaluation of Chemical and Biological Kinetic Gas Hydrate

28

ACS Paragon Plus Environment

Page 29 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

35.

Klomp, U., The World of LDHI: From Conception to Development to Implementation. In

2

Proceedings of the 6th International Conference on Gas Hydrates (ICGH 2008), Vancouver,

3

British Columbia, Canada, 2008.

4

36.

5

Deep Water Drilling Fluids. Energy Fuels 2010, 24 (5), 3003-3013.

6

37.

7

Hydrate Inhibitor. In Proceedings of the 20th International Offshore and Polar Engineering

8

Conference, International Society of Offshore and Polar Engineers: Beijing, China, 2010.

9

38.

Kelland, M. A.; Iversen, J. E., Kinetic Hydrate Inhibition at Pressures up to 760 Bar in

Chen, L.-T.; Sun, C.-Y.; Peng, B.-Z.; Chen, G.-J., The Synergism of PEG to Kinetic

Sharifi, H.; Ripmeester, J. A.; Walker, V. K.; Englezos, P., Kinetic Inhibition of Natural

10

Gas Hydrates in Saline Solutions and Heptane. Fuel 2014, 117, 109-117.

11

39.

12

Using Synthetic and Biological Kinetic Inhibitors. Energy Fuels 2011, 25 (1), 17-23.

13

40.

14

Inhibitors in Saline Solutions and n-Heptane. In Proceedings of the 8th International Conference

15

of Gas Hydrates (ICGH2014), Beijing, China, 2014.

16

41.

17

Inhibitors with Polyethylene Oxide. Chem. Eng. Sci. 2005, 60 (19), 5323-5330.

18

42.

19

Methane/Propane Clathrate Hydrate-Crystal Growth at the Gas/Water and Water/N-Heptane

20

Interfaces J. Cryst. Growth 2008, 310, 1154-1166.

21

43.

22

Hydrocarbon on the Heterogeneous Segregation and Deposition of Gas Hydrate Particles.

23

Korean J. Chem. Eng. 2014, 31 (12), 2177-2182.

Jensen, L.; Thomsen, K.; Von Solms, N., Inhibition of Structure I and II Gas Hydrates

Sharifi, H.; Englezos, P.; Ripmeester, J.; Walker, V. K., Evaluation of Kinetic Hydrate

Lee, J. D.; Englezos, P., Enhancement of the Performance of Gas Hydrate Kinetic

Kumar, R.; Lee, J. D.; Song, M.; Englezos, P., Kinetic Inhibitor Effects on

Shin, K.; Kim, J.; Seo, Y.; Kang, S.-P., Effect of Kinetic Hydrate Inhibitor and Liquid

29

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

44.

2

Evaluation of the Performance of Kinetic Hydrate Inhibitors Using Superheated Gas Hydrates.

3

Chem. Eng. Sci. 2011, 66, 1973-1985.

4

45.

5

Good Biodegradability. Energy Fuels 2008, 2 (3143-3149).

6

46.

7

Inhibitors on the Performance of Poly (Vinyl Pyrrolidone) in Deepwater Drilling Fluid. J. Nat.

8

Gas Sci. Eng. 2015, 23, 47-54.

9

47.

Page 30 of 54

Villano, L. D.; Kelland, M. A., An Investigation into the Laboratory Method for the

Villano, L. D.; Kommedal, R.; Kelland, M. A., Class of Kinetic Hydrate Inhibitors with

Zhao, X.; Qiu, Z.; Zhou, G.; Huang, W., Synergism of Thermodynamic Hydrate

Zhao, X.; Qiu, Z.; Huang, W., Characterization of Kinetics of Hydrate Formation in the

10

Presence of Kinetic Hydrate Inhibitors during Deepwater Drilling. J. Nat. Gas Sci. Eng. 2015,

11

22, 270-278.

12

48.

13

Hydrate Formation in Water-Based Drilling Fluids for Deep-water Drilling. In Proceedings of

14

the 8th International Conference on Gas Hydrates, Beijing, China, 2014.

15

49.

16

Inhibitors on Gas-Hydrate Formation by DSC: Non-Classical Structures? In Proceedings of the

17

6th International Conference on Gas Hydrates (ICGH 2008), Vencouver, British Columbia,

18

Canada, 2008.

19

50.

20

Kinetic Hydrate Inhibitors in Deep-Water Drilling Fluids. Energy Fuels 2008, 22 (4), 2405–

21

2410.

Garcia Chui, J. A.; Ning, F.; Wu, X.; Sun, C., The Effect of Lecithin and PVP on Gas

Malaret, F.; Dalmazzone, C.; Sinquin, A., Study of the Effect of Commercial Kinetic

Kelland, M. A.; Mønig, K.; Iversen, J. E.; Lekvam, K., Feasibility Study for the Use of

30

ACS Paragon Plus Environment

Page 31 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

51.

Daraboina, N.; Linga, P., Experimental Investigation of the Effect of Poly-N-

2

vinylpyrrolidone (PVP) on Methane/Propane Clathrates using a New Contact Mode. Chem. Eng.

3

Sci. 2013, 93, 387-394.

4

52.

5

Methane Hydrate Formation and Dissociation in Porous Media. J. Nat. Gas Sci. Eng. 2015, 27,

6

178-189.

7

53.

8

Industry, second ed.; CRC Press: Boca Raton, FL, 2014.

9

54.

Chong, Z. R.; Min Chan, A. H.; Babu, P.; Yang, M.; Linga, P., Effect of NaCl on

Kelland, M. A., Gas Hydrate Control. In Production Chemicals for the Oil and Gas

Sharifi, H.; Walker, V. K.; Ripmeester, J. A.; Englezos, P., Insights into the Behavior of

10

Biological Clathrate Hydrate Inhibitors in Aqueous Saline Solutions. Cryst. Growth Des. 2014,

11

14 (6), 2923-2930.

12

55.

13

Antifreeze Proteins with Natural Gas Hydrates in Saline and the Light Crude Oil Mimic,

14

Heptane. Energy Fuels 2014, 28 (6), 3712-3717.

15

56.

16

Woodley, J. M.; Kelland, M. A.; Von Solms, N., Inhibition of Gas Hydrate Nucleation and

17

Growth: Efficacy of an Antifreeze Protein from the Longhorn Beetle Rhagium Mordax. Energy

18

Fuels 2014, 28 (6), 3666-3672.

19

57.

20

V. K., Genetically-engineered Mutant Antifreeze Proteins Provide Insight into Hydrate

21

Inhibition. In Proceedings of the 7th International Conference on Gas Hydrates, Edinburgh,

22

Scotland, United Kingdom, 2011.

Sharifi, H.; Walker, V. K.; Ripmeester, J. A.; Englezos, P., Inhibition Activity of

Perfeldt, C. M.; Chua, P. C.; Daraboina, N.; Friis, D.; Kristiansen, E.; Ramløv, H.;

Myran, D.; Middleton, A.; Choi, J.; Gordienko, R.; Ohno, H.; Ripmeester, J. A.; Walker,

31

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 32 of 54

1

58.

Ohno, H.; Susilo, R.; Gordienko, R.; Ripmeester, J.; Walker, V. K., Interaction of

2

Antifreeze Proteins with Hydrocarbon Hydrates. Chem. Eur. J. 2010, 16 (34), 10409-10417.

3

59.

4

Towards a Green Hydrate Inhibitor: Imaging Antifreeze Proteins on Clathrates. PLoS One 2010,

5

5 (2), e8953.

6

60.

7

Antifreeze Glycoproteins as Inhibitors of Clathrate-Hydrate Formation. ChemPhysChem 2008, 9,

8

1630-1635.

9

61.

Gordienko, R.; Ohno, H.; Singh, V. K.; Jia, Z.; Ripmeester, J. A.; Walker, V. K.,

Cruz-Torres, A.; Romero-Martinez, A.; Galano, A., Computational Study on the

Walker, V. K.; Zeng, H.; Ohno, H.; Daraboina, N.; Sharifi, H.; Bagherzadeh, S. A.;

10

Alavi, S.; Englezos, P., Antifreeze Proteins as Gas Hydrate Inhibitors. Can. J. Chem. 2015, 93

11

(8), 839-849.

12

62.

13

Formation in the Presence of Low‐Dosage-Water‐Soluble Ionic Liquids. Chem. Eng. Technol.

14

2013, 36 (11), 1915-1923.

15

63.

16

Properties of Two Imidazolium-based Ionic Liquids on Structure II Gas Hydrate. Chem. Eng.

17

Sci. 2010, 65 (19), 5366-5372.

18

64.

19

2009, 64 (7), 1522-1527.

20

65.

21

Hydrate Inhibition: a Review of the Role of Ionic Liquids. Ind. Eng. Chem. Res. 2014, 53 (46),

22

17855-17868.

Nazari, K.; Moradi, M. R.; Ahmadi, A. N., Kinetic Modeling of Methane Hydrate

Villano, L. D.; Kelland, M. A., An Investigation into the Kinetic Hydrate Inhibitor

Xiao, C.; Adidharma, H., Dual Function Inhibitors for Methane Hydrate. Chem. Eng. Sci.

Tariq, M.; Rooney, D.; Othman, E.; Aparicio, S.; Atilhan, M.; Khraisheh, M., Gas

32

ACS Paragon Plus Environment

Page 33 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

66.

Herslund, P. J.; Thomsen, K.; Abildskov, J.; Von Solms, N.; Galfré, A.; Brântuas, P.;

2

Kwaterski, M.; Herri, J.-M., Thermodynamic Promotion of Carbon Dioxide–Clathrate Hydrate

3

Formation by Tetrahydrofuran, Cyclopentane and Their Mixtures. Int. J. Greenhouse Gas

4

Control 2013, 17, 397-410.

5

67.

6

Compounds on Hydrate Formation. In Proceedings of the 8th International Conference on Gas

7

Hydrates (ICGH8-2014), Beijing, China, 2014.

8

68.

9

of a Series of Copolymers of N‑Vinyl Azacyclooctanone on Structure II Gas Hydrate. Energy

Llamedo C, M. A.; Yánez, F., Innovative Results from the Evaluation of Natural

Reyes, F. T.; Kelland, M. A., Investigation of the Kinetic Hydrate Inhibitor Performance

10

Fuels 2013, 27, 1314-1320.

11

69.

12

and the Effect on Performance of Incorporating Cationic Monomers into N-Vinyl Lactam

13

Copolymers. Chem. Eng. Sci. 2013, 102, 424-431.

14

70.

15

Hydrate Formation Be Used to Rank the Performance of Kinetic Hydrate Inhibitors? Chem. Eng.

16

Sci. 2012, 82, 177-184.

17

71.

18

Presence of Various Inhibitors. PhD. Thesis, Curtin University of Technology, 2011.

19

72.

Talley, L. D.; Colle, K. S. International Patent Application WO/2006/110192. 2006.

20

73.

Schrader, G. A. International Patent Application WO/2012/041785. 2012.

21

74.

Spencer, H. J.; Lehmann, M. N.; Ionescu, T. C.; Garza, T. Z.; Jackson, S. J. International

22

Patent Application WO/2012/135116. 2012.

Nakarit, C.; Kelland, M. A.; Liu, D.; Chen, E. Y. X., Cationic Kinetic Hydrate Inhibitors

Dirdal, E. G.; arulanantham, C.; Sefidroodi, H.; Kelland, M. A., Can Cyclopentane

Rojas González, Y. V. Tetrahydrofuran and Natural Gas Hydrates Formation in the

33

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 34 of 54

1

75.

Hussain, A.; Gharfeh, S.; Adham, S. S., Study of Kinetic Hydrate Inhibitor Removal

2

Efficiency by Physical and Chemical Processes. In SPE International Production and

3

Operations Conference & Exhibition, Proceedings of the Society of Petroleum Engineers: Doha,

4

Qatar 2012.

5

76.

6

P. A., A Mature Southern North Sea Asset Considers Conversion to Wet Gas Operation Which

7

Requires the Development of Compatible and Novel Chemistries for Flow-Assurance and Asset

8

Integrity. In Proceedings of the Offshore Technology Conference, Houston, Texas, USA 2013.

9

77.

Morales, N. L.; Anthony, J.; Garming, J. F. L.; Trompert, R. A.; de Vries, G. J.; Webber,

Menendez, C. M.; Jardine, J.; Mok, W. Y.; Ramachandran, S.; Jovancicevic, V.;

10

Bhattacharya, A., New Sour Gas Corrosion Inhibitor Compatible with Kinetic Hydrate Inhibitor.

11

In Proceedings of the International Petroleum Technology Conference, Doha, Qatar, 2014.

12

78.

13

of Combined Kinetic Hydrate and Corrosion Inhibitors in the Southern North Sea: Case

14

Histories. In Proceedings of the SPE Gas Technology Symposium, Society of Petroleum

15

Engineers: Calgary, Alberta, Canada, 2006.

16

79.

Sloan, E. D. U.S. Patent 5420370. 1995.

17

80.

O'Reilly, R.; Ieong, N. S.; Chua, P. C.; Kelland, M. A., Missing Poly(N-vinyl lactam)

18

Kinetic Hydrate Inhibitor: High-Pressure Kinetic Hydrate Inhibition of Structure II Gas Hydrates

19

with Poly(Nvinylpiperidone) and Other Poly(N-vinyl lactam) Homopolymers. Energy Fuels

20

2011, 25, 4595-4599.

21

81.

MacDonald, A.; Petrie, M.; Wylde, J. J.; Chalmers, A.; Arjmandi, M., Field Application

Cohen, J. M.; Wolf, P. F.; Young, W. D. U.S. Patent Application 5723524. 1998.

34

ACS Paragon Plus Environment

Page 35 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

82.

Chua, P. C.; Kelland, M. A., Poly(N-vinyl azacyclooctanone): A More Powerful

2

Structure II Kinetic Hydrate Inhibitor than Poly(N-vinyl caprolactam). Energy Fuels 2012, 26,

3

4481-4485.

4

83.

Klomp, U. C. International Patent Application WO/2001/077270. 2001.

5

84.

Kelland, M. A., A Review of Kinetic Hydrate Inhibitors—Tailor-made Water-soluble

6

Polymers for Oil and Gas Industry Applications. In Advances in Materials Science Research,

7

Nova Science Publishers, Inc: New York, 2012; Vol. 8.

8

85.

9

Kinetic Hydrate Inhibition of Poly(N-isopropylmethacrylamide)s with Different Tacticities.

Chua, P. C.; Kelland, M. A.; Ishitake, K.; Satoh, K.; Kamigaito, M.; Okamoto, Y.,

10

Energy Fuels 2012, 26, 3577-3585.

11

86.

12

International Patent Application WO/2010/045520. 2010.

13

87.

Leinweber, D.; Feustel, M. U.S. Patent Application 20090054268. 2009.

14

88.

Leinweber, D.; Feustel, M. International Patent Application WO/2007/054226. 2007.

15

89.

Klug, P.; Kelland, M. A. International Patent Application WO/1998/023843. 1998.

16

90.

Colle, K. S.; Oelfke, R. H. International Patent Application WO/1996/008673. 1996.

17

91.

Villano, L. D.; Kommedal, R.; Fijten, M. W. M.; Schubert, U. S.; Hoogenboom, R.;

18

Kelland, M. A., A Study of the Kinetic Hydrate Inhibitor Performance and Seawater

19

Biodegradability of a Series of Poly(2-alkyl-2-oxazoline)s. Energy Fuels 2009, 23 (7), 3665-

20

3675.

21

92.

22

1996.

Carlise, J. R.; Lindeman, O. E. S.; Reed, P. E.; Conrad, P. G.; Ver vers, L. M.

Colle, K. S.; Costello, C. A.; Talley, L. D. Canadian Patent Application 96/2178371.

35

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 36 of 54

1

93.

Colle, K. S.; Costello, C. A.; Berluche, E.; Oelfke, R. H.; Talley, L. D. International

2

Patent Application WO/1996/041834. 1996.

3

94.

4

Scale Inhibition by Polyaspartamides. Energy Fuels 2011, 25 (11), 5165-5172.

5

95.

Kelland, M. A. International Patent Application WO/2008/023989. 2008.

6

96.

Talaghat, M. R., Experimental Investigation of Gas Consumption for Simple Gas Hydrate

7

Formation in a Recirculation Flow Mini-Loop Apparatus in The presence of Modified Starch as

8

a Kinetic Inhibitor. J. Nat. Gas Sci. Eng. 2013, 14, 42-48.

9

97.

Chua, P. C.; Sæbø, M.; Lunde, A.; Kelland, M. A., Dual Kinetic Hydrate Inhibition and

Lee, J. D.; Wu, H.; Englezos, P., Cationic Starches as Gas Hydrate Kinetic Inhibitors

10

Chem. Eng. Sci. 2007, 62, 6548-6555.

11

98.

12

Low Dosage Hydrate Inhibitors. In Proceedings of the 2nd National Iranian Conference on Gas

13

Hydrate, Semnan University, 2014.

14

99.

15

Means of Chemical Additives - 1. Development of an Experimental Set-Up for Characterization

16

of Gas Hydrate Inhibitor Efficiency with Respect to Flow Properties and Deposition. Chem. Eng.

17

Sci. 1995, 50 (5), 863-870.

18

100.

19

Fluids with and without the Presence of Inhibitors. In Proceedings of the 2nd International

20

Conference on Natural Gas Hydrates, Toulouse, France, 1996; pp 407-414.

21

101.

Erfani, A.; Varaminian, F.; Muhammadi, M., Gas Hydrate Formation Inhibition Using

Urdahl, O.; Lund, A.; Mørk, P.; Nilsen, T.-N., Inhibition of Gas Hydrate Formation by

Lund, A.; Urdahl, O.; Giertsen, L.; Kirkhorn, S.; Fadnes, F., Hydrate Properties of Real

Tian, J.; Littlefield, S. A. International Patent Application WO 2012/047821. 2012.

36

ACS Paragon Plus Environment

Page 37 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

102.

Kelland, M. A.; Grinrød, A.; Dirdal, E. G., Novel Benchtop Wheel Loop for Low Dosage

2

Gas Hydrate Inhibitor Screening: Comparison to Rocking Cells for a Series of Antiagglomerants.

3

Journal of Chemical & Engineering Data 2014, 60 (2), 252-257.

4

103.

5

the SPE International Symposium om Oilfield Chemistry, SPE 37285: Houston, Texas, 1997.

6

104.

7

Preliminary Results from a Pilot-Size Hydrate Flow Loop. In Proceedings of the 1st

8

International Conference on Natural Gas Hydrates, New Paltz, New York, 1993; p 430.

9

105.

Pakulski, M., High Efficiency Non-Polymeric Gas Hydrate Inhibitors. In Proceedings of

Reed, R. L.; Kelley, L. R.; Neumann, D. L.; Oelfke, R. H.; Young, W. D., Some

Talley, L. D.; Mitchell, G. F.; Oelfke, R. H., Comparison of Laboratory Results on

10

Hydrate Induction Rates in a THF Rig, High‐Pressure Rocking Cell, Miniloop, and Large

11

Flowloop. Annals of the New York Academy of Sciences 2000, 912 (1), 314-321.

12

106.

13

in Natural Gas Hydrates in Flow Assurance, S., D., Koh, C., Sum, A.K., Gulf Publishing,

14

Elsevier, Burlington MA, U.S.A., Ed. 2010.

15

107.

16

Patent Application WO/1996/041784. 1996.

17

108.

18

Patent Application WO/1996/041786 1996.

19

109.

20

International Patent Application WO/1996/008672

21

110.

Oelfke, R. H.; Talley, L. International Patent Application WO/1997/007320. 1997.

22

111.

Anselme, M. J.; Reijnhout, M. J.; Muljs, H. M.; Klomp, U. C. International Patent

23

Application WO/1993/025798. 1993.

Eaton, M.; Lachance, J.; Talley, L., Kinetic Hydrate Inhibitors Performance. In Chapter 6

Colle, K. S.; Oelfke, R. H.; Costello, C. A.; Talley, L. D.; Berluche, E. International

Colle, K. S.; Costello, C. A.; Talley, L. D.; Oelfke, R. H.; Berluche, E. International

Colle, K. S.; Costello, C. A.; Oelfke, R. H.; Talley, L. D.; Longo, J. M.; Berluche, E. 1996.

37

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 38 of 54

1

112.

Klomp, U. C.; Kruka, V.; Reinjhart, R., Low Dosage Inhibitors:(How) Do They Work. In

2

2nd International Conference on Controlling Hydrates, Waxes and Asphaltenes, Aberdeen, Oct,

3

1997.

4

113.

Sinquin, A.; Velly, M.; Durand, J. P. European Patent Application 789132. 1997.

5

114.

Sinquin, A.; Velly, M.; Durand, J. P. European Patent Application 807678. 1997.

6

115.

Palermo, T.; Argo, C. B.; Goodwin, S. P.; Henderson, A., Flow Loop Tests on a Novel

7

Hydrate Inhibitor to be Deployed in the North Sea Etap Field. Ann. N. Y. Acad. Sci. 2000, 912

8

(1), 355-365.

9

116.

Peytavy, J. L.; Glénat, P.; Bourg, P., Qualification of Low Dose Hydrate Inhibitors

10

(LDHIs): Field Cases Studies Demonstrate the Good Reproducibility of the Results Obtained

11

from Flow Loops. In Proceedings of the 6th International Conference on Gas Hydrates,

12

Vancouver, British Columbia, CANADA, 2008.

13

117.

14

Conditions Using a Multicell Steel Rocker Rig. Energy Fuels 2013, 27, 2536-2547.

15

118.

16

Force for Testing Low-Dosage Hydrate Inhibitors? Chem. Eng. Sci. 2005, 60 (5), 1313-1321.

17

119.

18

Cryst. Growth 2002, 241, 220-230.

19

120.

20

Distributions of Gas Hydrate Formation. AIChE J. 2013, 59 (7), 2640-2646.

21

121.

22

Study of Hydrogen Sulfide Hydrate Formation: Induction Time in the Presence and Absence of

23

Kinetic Inhibitor. J. Energy Chem. 2013, 22 (1), 114-118.

Lone, A.; Kelland, M. A., Exploring Kinetic Hydrate Inhibitor Test Methods and

Arjmandi, M.; Tohidi, B.; Danesh, A.; Todd, A. C., Is Subcooling the Right Driving

Kashchiev, D.; Firoozabadi, A., Driving Force for Crystallization of Gas Hydrates. J.

Wu, R.; Kozielski, K. A.; Hartley, P. G.; May, E. F.; Boxall, J.; Maeda, N., Probability

Salamat, Y.; Moghadassi, A.; Illbeigi, M.; Ali, E.; Mohammadi, A. H., Experimental

38

ACS Paragon Plus Environment

Page 39 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

122.

Ohmura, R.; Ogawa, M.; Yasuoka, K.; Mori, Y. H., Statistical Study of Clathrate-Hydrate

2

Nucleation in a Water/Hydrochlorofluorocarbon System: Search for the Nature of the “Memory

3

Effect”. J. Phys. Chem. B 2003, 107, 5289-5293.

4

123.

5

Method for the Laboratory Evaluation of Kinetic Hydrate Inhibitors. Energy Fuels 2010, 24,

6

616-623.

7

124.

8

Laboratory Evaluation of Kinetic Hydrate Inhibitors: A Procedure for Enhancing the

9

Repeatability of Test Results. Energy Fuels 2009, 23, 962-966.

Duchateau, C.; Glénat, P.; Pou, T.-E.; Hidalgo, M.; Dicharry, C., Hydrate Precursor Test

Duchateau, C.; Peytavy, J. L.; Glénat, P.; Pou, T. E.; Hidalgo, M.; Dicharry, C.,

10

125.

Ajiro, H.; Takemoto, Y.; Akashi, M.; Chua, P. C.; Kelland, M. A., Study of the Kinetic

11

Hydrate Inhibitor Performance of a Series of Poly-(N-alkyl-N-vinylacetamide)s. Energy Fuels

12

2010, 24, 6400-6410.

13

126.

14

Performance by High-Pressure Differential Scanning Calorimetry. In Proceedings of the 7th

15

International Conference on Gas Hydrates, Edinburgh, Scotland, United Kingdom, 2011.

16

127.

17

Effectiveness Using Emulsions. Chem. Eng. Sci. 2009, 64 (1), 180-184.

18

128.

19

Hydrate Formation. Fuel 2013, 108, 749-757.

20

129.

21

Based Method for The Evaluation of Kinetic Hydrate Inhibitors. In Proceedings of the 7th

22

International Conference on Gas Hydrates, Edinburgh, Scotland, United Kingdom, 2011.

McNamee, K., Evaluation of Hydrate Nucleation Trends and Kinetic Hydrate Inhibitor

Lachance, J. W.; Sloan, E. D.; Koh, C. A., Determining Gas Hydrate Kinetic Inhibitor

Daraboina, N.; Malmos, C.; Von Solms, N., Synergistic Kinetic Inhibition of Natural Gas

Anderson, R.; Mozaffar, H.; Tohidi, B., Development of a Crystal Growth Inhibition

39

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

130.

2

Study on "Un-normal" Dissociation Properties of Structure II Hydrates Formed in Presence of

3

PVCap in the Region 30 to 175 Bars-Dissociation by Temperature Increase. In Proceedings of

4

the 6th International Conference on Gas Hydrates, Vancouver, Canada, 2008.

5

131.

6

for the Qualification of a Kinetic Hydrate Inhibitor under Flowing and Shut-In Conditions.

7

Energy Fuels 2014, 28, 2902-2913.

8

132.

9

Inhibitors Using a New Crystal Growth Inhibition Approach Highlighting Major Differences

Page 40 of 54

Svartaas, T. M.; Gulbrandsen, A. C.; Huseboe, S. B. R.; Sandved, O., An Experimental

Luna-Ortiz, E.; Healey, M.; Anderson, R.; Sørhaug, E., Crystal Growth Inhibition Studies

Glénat, P.; Bourg, P.; Bousqué, M.-L., Selection of Commercial Kinetic Hydrate

10

between Them. In Proceedings of the SPE Middle East Oil and Gas Show and Conference

11

(MEOS), Manama, Bahrain, 2013.

12

133.

13

Inhibition Based KHI Evaluation Method to Commercial Formulation Assessment. In

14

Proceedings of the 7th International Conference on Gas Hydrates, Edinburgh, Scotland, United

15

Kingdom, 2011.

16

134.

17

KHI Performance. In Proceedings of the 8th International Conference on Gas Hydrates, Beijing,

18

China, 2014.

19

135.

20

Techniques for the Evaluation of Low Dosage Hydrate Inhibitor Performance. In Proceedings of

21

the 8th International Conference on Gas Hydrates, Beijing, China, 2014.

Glénat, P.; Anderson, R.; Mozaffar, H.; Tohidi, B., Application of a New Crystal Growth

Rithauddeen, M. A.; Al-Adel, S.; Anderson, R.; Tohidi, B., A New Approach to Evaluate

Hase, A.; Cadger, S.; Meiklejohn, T.; Smith, R., Comparison of Different Testing

40

ACS Paragon Plus Environment

Page 41 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

136.

Hould, N.; Elanany, M. S.; Aleisa, R. M.; Al-Majnouni, K. A.; Al-Malki, A.; Abba, I.,

2

Evaluating Polymeric Inhibitors of Ethane Clathrate Hydrates. J. Nat. Gas Sci. Eng. 2015, 24,

3

543-549.

4

137.

5

Sloan, E. D.; Koh, C. A., Neutron Diffraction and ESPR Simulations of the Hydration Structure

6

around Propane Molecules before and during Gas Hydrate Formation In Proceedings of the 6th

7

International Conference on Gas Hydrates, Vancouver, British Columbia, Canada, 2008.

8

138.

9

Dynamics Simulations of Methane Hydrate Pre-Nucleation Phenomena and the Effect of PVcap

Aldiwan, N. H.; Lui, Y.; Soper, A. K.; Thompson, H.; Creek, J. L.; Westacott, R. E.;

Kuznetsova, T.; Kvamme, B.; Parmar, A.; Simos, T. E.; Maroulis, G., Molecular

10

Kinetic Inhibitor. In AIP Conference Proceedings, 1504, 776, 2012.

11

139.

12

Phase Equilibria 1998, 150-151, 353-360.

13

140.

14

clathrate hydrate and its inhibition: Method and first results. Journal of Crystal Growth 1997,

15

179 (5), 258-262.

16

141.

17

Polyvinylpyrrolidone (PVP) Concentration on Methane Hydrate Growth. 2. Liquid Phase

18

Methane Mole Fraction. Chem. Eng. Sci. 2015, 126, 91-98.

19

142.

20

Inhibitor Polyvinylpyrrolidone throughout the Methane Hydrate Formation Process. Energy

21

Fuels 2015, 29, 2329-2335.

22

143.

23

by Neutron Scattering. Macromolecules 2000, 33 (7), 2670-2679.

Larsen, R.; Knight, C. A.; Sloan, E. D., Clathrate hydrate growth and inhibition. Fluid

Makogon, T. Y.; Larsen, R.; Knight, C. A.; Sloan, E. D., Melt growth of tetrahydrofuran

Posteraro, D.; Ivall, J.; Maric, M.; Servio, P., New Insights into the Effect of

Ivall, J.; Pasieka, J.; Posteraro, D.; Servio, P., Profiling the Concentration of the Kinetic

Hutter, J. L.; King, H. E.; Lin, M. Y., Polymeric Hydrate-inhibitor Adsorption Measured

41

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

144.

2

Application WO/1995/017579. 1995.

3

145.

4

Powerful THF Hydrate Crystal Growth Inhibitors and Their Synergism with Poly-

5

Vinylcaprolactam Kinetic Gas Hydrate Inhibitor. Chem. Eng. Sci. 2016, 144, 275-282.

6

146.

7

Hyperbranched Poly (ester amide)s. Chem. Eng. Sci. 2009, 64 (13), 3197-3200.

8

147.

9

Methane−Ethane Hydrate Metastability. J. Phys. Chem. A 2009, 113 (9), 1711-1716.

Page 42 of 54

Klomp, U. C.; Kruka, V. C.; Reinjhart, R.; Weisenborn, A. J. International Patent

Mady, M. F.; Kelland, M. A., Tris (tert-heptyl)-N-alkyl-1-Ammonium Bromides—

Del Villano, L.; Kelland, M. A., Tetrahydrofuran Hydrate Crystal Growth Inhibition by

Ohno, H.; Strobel, T. A.; Dec, S. F.; Sloan, E. D.; Koh, C. A., Raman Studies of

10

148.

Anderson, B. J.; Tester, J. W.; Borghi, G. P.; Trout, B. L., Properties of Inhibitors of

11

Methane Hydrate Formation via Molecular Dynamics Simulations. J. Am. Chem. Soc. 2005, 127,

12

17852-17862.

13

149.

14

the 4th International Conference on Gas Hydrates, Yokohama, Japan, 2002; pp 498-503.

15

150.

16

Hydrate. J. Chem. Soc., Faraday Trans. 1995, 91 (19), 3449-3460.

17

151.

18

Quaternary Ammonium-Based Tetrahydrofuran Crystal Growth Inhibitor and Synergist with

19

Polyvinylcaprolactam Kinetic Gas Hydrate Inhibitor. Energy Fuels 2012, 26, 1160-1168.

20

152.

21

Selection of Kinetic Hydrate Inhibitors. J. Mol. Graphics Modell. 2005, 23 (6), 524-536.

22

153.

23

Inhibitors. J. Mater. Chem. 2006, 16 (20), 1934-1942.

Makogon, T. Y.; Sloan, E. D., Mechanism of kinetic hydrate inhibitors. In Proceedings of

Carver, T. J.; Drew, M. G. B.; Rodger, P. M., Inhibition of Crystal Growth in Methane

Chua, P. C.; Kelland, M. A., Tetra(iso-hexyl)ammonium Bromide—The Most Powerful

Kvamme, B.; Kuznetsova, T.; Aasoldsen, K., Molecular Dynamics Simulations for

Hawtin, R. W.; Rodger, P. M., Polydispersity in Oligomeric Low Dosage Gas Hydrate

42

ACS Paragon Plus Environment

Page 43 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

154.

Wathen, B.; Kwan, P.; Jia, Z.; Walker, V. K., Modeling the Interactions between Poly(N-

2

Vinylpyrrolidone) and Gas Hydrates: Factors Involved in Suppressing and Accelerating Hydrate

3

Growth. Lect. Notes Comput. Sci. 2010, 5976, 117-133.

4

155.

5

Methane Hydrate Nucleation Rates from Molecular Dynamics Simulations: Effects of Aqueous

6

Methane Concentration, Interfacial Curvature, and System Size. J. Phys. Chem. C 2011, 115,

7

21241-21248.

8

156.

9

of Spontaneous Methane Hydrate Nucleation and Growth. Science 2009, 326 (5956), 1095-1098.

Walsh, M. R.; Beckham, G. T.; Koh, C. A.; Sloan, E. D.; Wu, D. T.; Sum, A. K.,

Walsh, M. R.; Koh, C. A.; Sloan, E. D.; Sum, A. K.; Wu, D. T., Microsecond Simulations

10

157.

Abay, H. K.; Svartaas, T. M.; Ke, W., Effect of Gas Composition on sII Hydrate Growth

11

Kinetics. Energy Fuels 2011, 25, 1335 - 1341.

12

158.

13

Presence of Methanol, PVP and PVCap in an Isochoric Cell. In Proceedings of the 7th

14

International Conference on Gas Hydrates, Edinburgh, Scotland, 2011.

15

159.

16

Hydrates in the Presence of Kinetic Hydrate Inhibitors. J. Phys. Chem. A 2013, 117 (51), 13988-

17

13995.

18

160.

19

Nutshell as a Kinetic Inhibitor for Methane Hydrate Formation. J. Braz. Chem. Soc. 2012, 23 (1),

20

11-13.

21

161.

22

Growth Behavior of Methane/Ethane/Propane Hydrate Crystals in the Presence of Inhibitor at

Ke, W.; Svartaas, T. M.; Abay, H. K., An Experimental Study on sI Hydrate Formation in

Cha, M.; Shin, K.; Seo, Y.; Shin, J.-Y.; Kang, S.-P., Catastrophic Growth of Gas

Ferreira, J. C.; Teixeira, A.; Esteves, P. M., A Polyether Glycol Derived from Cashew

Daraboina, N.; Linga, P.; Ripmeester, J.; Walker, V. K.; Englezos, P., The Unusual

43

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 44 of 54

1

Low Pressure. In Proceedings of the 8th International Conference on Gas Hydrates, Beijing,

2

China, 2014.

3

162.

4

Hydrate Formation and Decomposition in the Presence of Kinetic Inhibitors. 2. Stirred Reactor

5

Experiments. Energy Fuels 2011, 25, 4384-4391.

6

163.

7

Formation. J. Nat. Gas Chem. 2010, 19 (4), 431-435.

8

164.

9

Polymeric Inhibitors on Methane Gas Hydrate Growth Kinetics. Fluid Phase Equilib. 2008, 267,

Daraboina, N.; Linga, P.; Ripmeester, J. A.; Walker, V. K.; Englezos, P., Natural Gas

Xu, Y.; Yang, M.; Yang, X., Chitosan as Green Kinetic Inhibitors for Gas Hydrate

Al-Adel, S.; Dick, J. A. G.; El-Ghafari, R.; Servio, P., The Effect of Biological and

10

92-98.

11

165.

12

Methane Clathrate Hydrate Formation and Dissociation Kinetics. Energy Technol. 2015, 3 (7),

13

717-725.

14

166.

15

Polyvinylpyrrolidone (PVP) Concentration on Methane Hydrate Growth. 1. Growth Rate. Chem.

16

Eng. Sci. 2015, 126, 99-105.

17

167.

18

on the Effect of the KHI Polymer Size on sII Hydrate Formation and Dissociation in an Isochoric

19

Cell System. In Proceedings of the 6th International Conference on Gas Hydrates, Vancouver,

20

Canada, 2008.

21

168.

22

Hydrates on the Bubble Surface in the Presence of SDS or PVCap. J. Cryst. Growth 2014, 402,

23

249-259.

Kumar, A.; Sakpal, T.; Kumar, R., Influence of Low-Dosage Hydrate Inhibitors on

Posteraro, D.; Verrett, J.; Maric, M.; Servio, P., New Insights into the Effect of

Svartaas, T. M.; Gulbrandsen, A. C.; Fjelldal, T. H.; Gjessen, M., An Experimental Study

Lee, S. Y.; Kim, H. C.; Lee, J. D., Morphology Study of Methane–Propane Clathrate

44

ACS Paragon Plus Environment

Page 45 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

169.

Bruusgaard, H.; Lessard, L. D.; Servio, P., Morphology Study of Structure I Methane

2

Hydrate Formation and Decomposition of Water Droplets in the Presence of Biological and

3

Polymeric Kinetic Inhibitors. Cryst. Growth Des 2009, 9 (7), 3014-3023.

4

170.

5

and Soya Proteins as Kinetic Hydrate Inhibitors. In Proceedings of the 8th International

6

Conference on Gas Hydrates, Beijing, China, 2014.

7

171.

8

Inhibitors in NaCl/N‐heptane Solutions. AIChE J. 2014, 60 (7), 2654-2659.

9

172.

Li, X.; Askvik, K. M.; Yi, Y.; Kelland, M. A.; Magnusson, C. D., Testing of Soya Sauce

Sharifi, H.; Hatzikiriakos, S. G.; Englezos, P., Rheological Evaluation of Kinetic Hydrate

Rasoolzadeh, A.; Javanmardi, J.; Ansaripoor, G., Experimental Study of Methane

10

Hydrate Formation and Dissociation in the Presence of PVP and BMIM-BF4. In Proceedings of

11

the 8th International Chemical Engineering Congress & Exhibition, Kish, Iran, 2014.

12

173.

13

the Natural Gas from the South China Sea. J. Chem. Eng. Data 2014, 60 (2), 311-318.

14

174.

15

Hydrate Formation with Low-Dosage Hydrate Inhibitors. Sci. China: Chem. 2010, 53 (12),

16

2622-2627.

17

175.

18

Using Raft Polymerization and Application for Low Dosage Hydrate Inhibitor. In Proceedings of

19

the 8th International Conference on Gas Hydrates, Beijing, China, 2014.

20

176.

21

Imidazolium Based Ionic Liquids and Ethylene Glycol Monoethyl Ether Solutions on the Kinetic

22

of Methane Hydrate Formation. J. Mol. Liq. 2015, 204, 236-242.

Xu, S.; Fan, S.; Wang, Y.; Lang, X., An Investigation of Kinetic Hydrate Inhibitors on

Tang, C.; Dai, X.; Du, J.; Li, D.; Zang, X.; Yang, X.; Liang, D., Kinetic Studies of Gas

Seo, S. D.; Kim, D. H.; Lee, J. D.; Paik, H.-J., Synthesis of Poly Vinyl-Caprolactam

Zare, M.; Haghtalab, A.; Ahmadi, A. N.; Nazari, K.; Mehdizadeh, A., Effect of

45

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

177.

2

N‑Alkyl‑N‑vinylformamide Polymers: Comparison of Polymers to n‑Propyl and Isopropyl

3

Groups. Energy Fuels 2015, 29, 4941-4946.

4

178.

5

Inhibitor Polymers, Hexaalkylguanidinium Salts: Tetrahydrofuran Hydrate Crystal Growth

6

Inhibition and Synergism with Polyvinylcaprolactam. Energy Fuels 2013, 27 (2), 711-716.

7

179.

8

Inhibition in Gas/Crude Oil/Aqueous Systems. Fuel 2015, 148, 186-190.

9

180.

Page 46 of 54

Kelland, M. A.; Abrahamsen, E.; Ajiro, H.; Akashi, M., Kinetic Hydrate Inhibition with

Kelland, M. A.; Moi, N.; Howarth, M., Breakthrough in Synergists for Kinetic Hydrate

Daraboina, N.; Pachitsas, S.; Von Solms, N., Natural Gas Hydrate Formation and

Cook, S.; Garza, T.; Jardine, J.; Smith, C., Investigation of Laboratory Scale Equipment

10

for Kinetic Hydrate Inhibitors Evaluation. In Proceedings of the 8th International Conference on

11

Gas Hydrates, Beijing, China, 2014.

12

181.

13

with a Kinetic Hydrate Inhibitor. J. Pet. Sci. Eng. 2012, 88, 61-66.

14

182.

15

Dosage Poly (Ethylene Oxides) on Methane Hydrate Formation. Chem. Eng. Technol 2013, 36

16

(7), 1117-1124.

17

183.

18

Hydrocarbon Hydrates during Formation with and without Inhibitors. J. Phys. Chem. A 2012,

19

116 (5), 1337-1343.

20

184.

21

Time of Natural Gas Hydrate and Its Prediction with Polymeric Kinetic Inhibitor. Chem. Eng.

22

Sci. 2014, 116, 817-823.

Seo, Y.; Kang, S.-P., Inhibition of Methane Hydrate Re-Formation in Offshore Pipelines

Sina, M.; Nazari, K.; Mohammad‐Taheri, M.; Moradi, M. R., Dual Effect of Low‐

Ohno, H.; Moudrakovski, I.; Gordienko, R.; Ripmeester, J.; Walker, V. K., Structures of

Kang, S.-P.; Shin, J.-Y.; Lim, J.-S.; Lee, S., Experimental Measurement of the Induction

46

ACS Paragon Plus Environment

Page 47 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

185.

Yang, J.; Tohidi, B., Characterization of Inhibition Mechanisms of Kinetic Hydrate

2

Inhibitors Using Ultrasonic Test Technique. Chem. Eng. Sci. 2011, 66, 278-283.

3

186.

4

Kinetic Inhibitions on Gas Hydrate Formation. Energy Fuels 2013, 27 (11), 6581-6586.

5

187.

6

Methane−Propane Mixed Gas Hydrate Film Growth on the Surface of Water and Luvicap EG

7

Solutions. Energy Fuels 2013, 27, 2548-2554.

8

188.

9

Homo-and Copolymers of N-Acryloylpyrrolidine and N-Vinylpyrrolidone as Kinetic Inhibitors

Park, S.; Ro, H.; Lee, J.-W.; Kang, H.; Lee, H., Morpholine-Induced Thermodynamic and

Wu, R.; Kozielski, K. A.; Hartley, P. G.; May, E. F.; Boxall, J.; Maeda, N.,

Semenov, A. P.; Gushchin, P. A.; Ivanov, E. V.; Vinokurov, V. A.; Sapozhnikov, D. A.,

10

of Hydrate Formation. Chem. Technol. Fuels Oils 2011, 46 (6), 417-423.

11

189.

12

Effective Kinetic Inhibitors for Natural Gas Hydrates. Energy Fuels 2012, 26, 1037-1043.

13

190.

14

Dosage Additives Known as Kinetic Hydrate Inhibitors. J. Chem. Eng. Data 2014, 60 (2), 336-

15

342.

16

191.

17

Formation and Decomposition in the Presence of Kinetic Inhibitors. 1. High Pressure

18

Calorimetry. Energy Fuels 2011, 25, 4392-4397.

19

192.

20

Formation by Ice-Structuring Proteins. Ind. Eng. Chem. Res. 2010, 49, 1486-1492.

21

193.

22

C2H6 Hydrate Reformation. In Proceedings of the 6th International Conference on Gas

23

Hydrates, Vancouver, British Columbia, Canada, 2008.

Lou, X.; Ding, A.; Maeda, N.; Wang, S.; Kozielski, K. A.; Hartley, P. G., Synthesis of

Sharifi, H.; Englezos, P., Accelerated Hydrate Crystal Growth in the Presence of Low

Daraboina, N.; Ripmeester, J. A.; Walker, V. K.; Englezos, P., Natural Gas Hydrate

Jensen, L.; Ramløv, H.; Thomsen, K.; Von Solms, N., Inhibition of Methane Hydrate

Ohno, H.; Dec, S. F.; Sloan, E. D.; Koh, C. A., In Situ NMR Measurement Of CH4+

47

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 48 of 54

1

194.

Turner, D. J.; Kleehammer, D. M.; Miller, K. T.; Koh, C. A.; Sloan, E. D.; Talley, L. D.,

2

Formation of Hydrate Obstructions in Pipelines: Hydrate Particle Development and Slurry Flow.

3

In Proceedings of the Fifth International Conference on Gas Hydrates, Trondheim, Norway,

4

2005.

5

195.

6

Hydrate Inhibitor in the Presence of Polyoxides for Simple Gas Hydrate Formation in a Flow

7

Mini-Loop Apparatus. J. Nat. Gas Sci. Eng. 2014, 18, 7-12.

8

196.

9

Investigation of Simple Gas Hydrate Formation with or without Presence of Kinetic Inhibitors in

Talaghat, M. R., Enhancement of the Performance of Modified Starch as a Kinetic

Talaghat, M. R.; Esmaeilzadeh, F.; Fathikaljahi, J., Experimental and Theoretical

10

a Flow Mini-Loop Apparatus. Fluid Phase Equilib. 2009, 279, 28-40.

11

197.

12

Koh, C. A., Search for Memory Effects in Methane Hydrate: Structure of Water before Hydrate

13

Formation and after Hydrate Decomposition. J. Chem. Phys. 2005, 123 (16), 164507.

14

198.

15

Mechanisms of Gas Hydrate Formation and Inhibition. Fluid Phase Equilib. 2002, 194-197, 143-

16

151.

17

199.

18

Greenblatt, M., Structure and Dynamics of Hydrogen Molecules in the Novel Clathrate Hydrate

19

by High Pressure Neutron Diffraction. Phys. Rev. Lett. 2004, 93 (12).

20

200.

21

the Performance of Kinetic Hydrate Inhibitors. In Proceedings of the 7th International

22

Conference on Gas Hydrates, Edinburgh, Scotland, United Kingdom, 2011.

Buchanan, P.; Soper, A. K.; Thompson, H.; Westacott, R. E.; Creek, J. L.; Hobson, G.;

Koh, C. A.; Westacott, R. E.; Zhang, W.; Hirachand, K.; Creek, J. L.; Soper, A. K.,

Lokshin, K. A.; Zhao, Y.; He, D.; Mao, W. L.; Mao, H.; Hemley, R. J.; Lobanov, M. V.;

Daraboina, N.; Ripmeester, J. A.; Walker, V. K.; Englezos, P., Multi-scale Assessment of

48

ACS Paragon Plus Environment

Page 49 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

201.

Daraboina, N.; Ripmeester, J. A.; Walker, V. K.; Englezos, P., Natural Gas Hydrate

2

Formation and Decomposition in the Presence of Kinetic Inhibitors. 3. Structural and

3

Compositional Changes. Energy Fuels 2011, 25, 4398-4404.

4

202.

5

Perturbation of Liquid Water Structure. Sci. Rep. 2015, 5:11526.

6

203.

7

Formation in the Presence of Kinetic Inhibitor via in Situ Raman Spectroscopy. Energy Fuels

8

2012, 26, 7045-7050.

9

204.

Sa, J.-H.; Kwak, G.-H.; Han, K.; Ahn, D.; Lee, K.-H., Gas Hydrate Inhibition by

Hong, S. Y.; Lim, J. I.; Kim, J. H.; Lee, J. D., Kinetic Studies on Methane Hydrate

Ersland, G.; Husebø, J.; Graue, A.; Kvamme, B., Transport and Storage of CO2 in

10

Natural Gas Hydrate Reservoirs. Energy Procedia 2009, 1 (1), 3477-3484.

11

205.

12

Tegze, G., Kinetics of Solid Hydrate Formation by Carbon Dioxide: Phase Field Theory of

13

Hydrate Nucleation and Magnetic Resonance Imaging. Phys. Chem. 2004, 6 (9), 2327-2334.

14

206.

15

Amino Acids as a New Class of Kinetic Inhibitors for Gas Hydrate Formation. Sci. Rep. 2013, 3.

16

207.

17

Measuring the Particle Size of a Known Distribution Using the Focused Beam Reflectance

18

Measurement Technique. Chem. Eng. Sci. 2008, 63, 5410-5419.

19

208.

20

Hydrate Formation Using in situ Particle Size Analysis. Chem. Eng. Sci. 2005, 60 (3), 695-709.

21

209.

22

The Mysteries of Memory Effect and Its Elimination with Antifreeze Proteins. In Proceedings of

23

the 6th International Conference on Gas Hydrates, Vancouver, British Columbia, Canada, 2008.

Kvamme, B.; Graue, A.; Aspenes, E.; Kuznetsova, T.; Granasy, L.; Toth, G.; Pusztai, T.;

Sa, J.-H.; Kwak, G.-H.; Lee, B. R.; Park, D.-H.; Han, K.; Lee, K.-H., Hydrophobic

Greaves, D.; Boxall, J.; Mulligan, J.; Montesi, A.; Greek, J.; Sloan, E. D.; Koh, C. A.,

Clarke, M. A.; Bishnoi, P. R., Determination of the Intrinsic Kinetics of CO2 Gas

Walker, V. K.; Zeng, H.; Gordienko, R. V.; Kuiper, M. J.; Huva, E. I.; Ripmeester, J. A.,

49

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

210.

2

Polymer–Water Interactions and Their Relation to Gas Hydrate Inhibition. J. Appl. Polym. Sci.

3

2007, 103, 2642-2653.

4

211.

5

Measurements for Laboratory Evaluation of Kinetic Hydrate Inhibitors. Chem. Eng. Sci. 2012,

6

71, 220-225.

7

212.

8

Thickness Using Laser Interferometry. J. Cryst. Growth 2000, 218, 372-380.

9

213.

Page 50 of 54

Varma-Nair, M.; Costello, C. A.; Colle, K. S.; King, H. E., Thermal Analysis of

Duchateau, C.; Pou, T.-E.; Hidalgo, M.; Glénat, P.; Dicharry, C., Interfacial

Ohmura, R.; Kashiwazaki, S.; Mori, Y. H., Measurements of Clathrate-hydrate Film

Nosoko, T.; Mori, Y. H.; Nagata, T., Improved Interferometer for Measuring Unsteady

10

Film Thickness. Rev. Sci. Instrum. 1996, 67 (8), 2685-2690.

11

214.

12

Measuring Instantaneous Thickness of Transparent Solid and Liquid Films. Rev. Sci. Instrum.

13

1988, 59 (9), 2018-2022.

14

215.

15

Maeda, N., Quantitative Kinetic Inhibitor Comparisons and Memory Effect Measurements from

16

Hydrate Formation Probability Distributions. Chem. Eng. Sci. 2014, 107, 1-12.

17

216.

18

Polymers for Gas Hydrate Control. In Proceedings of the Offshore Technology Conference,

19

Houston, Texas, USA, 2011.

Ohyama, T.; Endoh, K.-i.; Mikami, A.; Mori, Y. H., Optical Interferometry for

May, E. F.; Wu, R.; Kelland, M. A.; Aman, Z. M.; Kozielski, K. A.; Hartley, P. G.;

Zheng, J.; Musa, O.; Lei, C.; Zhang, Y.; Alexandre, M.; Edris, S. A., Innovative KHI

20

50

ACS Paragon Plus Environment

Page 51 of 54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

Tables

2

Table 1. Apparatus/reaction vessels used in gas hydrate studies in the presence of KHIs. Apparatus/Vessel Autoclave Autoclave Autoclave Autoclave Autoclave Autoclave Autoclave Autoclave Autoclave Autoclave Autoclave Autoclave Semi-batch autoclave Crystallizer Crystallizer Crystallizer Crystallizer Crystallizer Semi-batch crystallizer Semi-batch crystallizer Stainless-steel cell Stainless-steel cell Stainless-steel cell Sapphire crystallizer Sapphire crystallizer Sapphire crystallizer Stirred reactor Stirred reactor Stirred reactor Stirred reactor Stirred reactor Stirred reactor Rocking cell (RC5)

Sapphire Rocker rig (RCS20) T-Piece rocking cell HP cell HP cell

Inner Volume (cm3) 145 200 280

Pressure Grade (MPa) 40 15 41

290 300 23 280 300 500 750 3000 25000 58 500 610 211 400 2182 600 N/A 200 235 288 77 100 50.7 43.3 90 300 1072 372,5 750 40

14.7 41 N/A N/A N/A N/A N/A N/A N/A N/A 20 20 N/A N/A N/A 12 N/A N/A N/A N/A 20 50 N/A 15 15 20 20 N/A N/A 20

20 N/A 100 280

N/A N/A 20 10

Research Group Svartaas and co-workers157, 158 Cha et al.159 Llamedo C and Yánez;67 Anderson et al.129 Ferreira et al.160 Luna-Ortiz et al.131 Chua et al.85 Glénat et al.132 Shin et al.43 Kelland and Iversen36 Zhao and co-workers46, 47 Hould et al.136 Salamat et al.121 Daraboina and co-workers161, 162 Xu et al.163 Al-Adel et al.164 Sharifi et al.38 Kumar et al.165 Chong et al.52 Posteraro and co-workers141, 166 Lee and co-workers41, 97 Villano and Kelland44 Svartaas et al.167 Lee et al.168 Bruusgaard et al.169 Li et al.170 Chen et al.37 Sharifi et al.171 Rasoolzadeh et al.172 Xu et al.173 Tang et al.174 Seo et al.175 Zare et al.176 Kelland and co-workers;117, 177, 178 Daraboina et al.;179 Li et al.170 Li et al.170 Cook et al.180 Duchateau et al.124 Jensen et al.39

51

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

HP cell HP cell HP cell HP cell HP cell HP cell HP cell HP-Video cell Micro-Cell PVT cell HP-ALTA HP-micro DSC

1

300 300 1 30 90 556 600 N/A 60 N/A 0.15 0.5-1

12 15 N/A N/A N/A N/A N/A 15 N/A N/A N/A 40

Hydrate equilibrium cell Sealed glass ampoules Pipe-wheel Flow loop

66.5 0.2 13400 Up to 106

15 N/A 15 10-15

Mini/micro flow loop

100-1000

~10

Page 52 of 54

Seo and Kang181 Sina et al.182 Ohno et al.147 Ohno et al.183 Kang et al.184 Yang and Tohidi185 Park et al.186 Wu et al.187 Rojas González71 Semenov et al.188 Lou et al.189 McNamee;126 Sharifi and Englezos;190 Daraboina and Linga;51, 191 Jensen et al.192 Ohno et al.193 Urdahl and co-workers99, 100 Reed et al.;104 Talley et al.;105 Klomp and co-workers;83, 111 Peytavy et al;116 Turner et al.194 Talaghat and co-workers;195, 196 Cook et al.180

N/A: not applicable or not given in the literature.

2

52

ACS Paragon Plus Environment

Page 53 of 54

1 2 3 4 5Nr. 61 7 82 9 10 3 11 12 4 13 14 5 15 16 6 17 18 19 7 20 21 8 22 23 9 24 25 10 26 27 11 28 29 12 30 31 32 13 33 34 14 35 36 15 37 38 16 39 40 17 41 42 43 18 44 45 19 46 47 20 48 21 49 22 50 23 51 52 53 24 54 25 55 56 57 58 59 60

1

Energy & Fuels

Table 2. Monitoring & characterizing techniques frequently used in gas hydrate and KHI studies.

Technique Neutron diffraction Proton (1H) NMR Solid-state 13C NMR Solid-state 13C magic angle spinning (MAS) NMR Raman spectroscopy Polarized Raman spectroscopy In-situ laser Raman spectroscopy Infrared (IR) spectroscopy Magnetic resonance imaging (MRI) Powder X-ray diffraction Gas chromatography (GC) Size-exclusion chromatography (SEC) Gel permeation chromatography (GPC) Microscope with CCD/digital camera Focused beam reflectance measurement (FBRM) Ultrasonic signal processing

Function & short description Determines the atomic and/or magnetic structure of a material via neutron scattering Applies NMR with respect to hydrogen nuclei to determine the molecular structures Complements to X-ray diffraction and provides structural information about solids and polymers Spins the sample with respect to the direction of the magnetic field for increased resolution Observes vibrational, rotational, and other lowfrequency modes for identification of molecules Reveals the molecular orientation and symmetry of the bond vibrations to identify chemicals Enhances the Raman effect for identification of substances by using lasers Identifies molecular information (e.g., can measure the degree of polymerization) Quantifies molecular information during crystallization and phase transition Identifies phases of a crystalline material and provides information on the unit cell dimensions Separates and analyzes compounds to measure the content of various components in a sample Separates molecules by sizes or molecular weights. Often applied to proteins or polymers Separates analytes on the basis of size; a type of size-exclusion chromatography Captures images with modern optical microscopy Measures in-situ particle size

Quartz crystal microbalancedissipation (QCM-D) Differential scanning calorimeter (DSC) Micro-differential scanning calorimeter (micro DSC) Pendant drop tensiometer Laser interferometer Photodetector Optical/video camera

Identifies integrity or geometry of the substance; can characterizes phase change or defect Detects interfacial acoustic signals to examine surface adsorption, film thickness or softness Measures heat exchange between the sample and the reference as a function of temperature Operates in wider temperature and pressure ranges, as compared to the normal DSC Measures interfacial tension Measures hydrate film thickness Detects change in the light transmission Visually observes hydrate formation

Boroscope Viscometer

Inspects the inner structure through a small hole Measures torque and viscosity in a fluid system

Selected references Koh and co-workers;137, 197, 198 Lokshin et al.199 Kelland et al.;177 Ferreira et al.;160 Semenov et al.188 Park et al.;186 Cha et al.;159 Ohno et al.;183 Ferreira et al.;160 Semenov et al.;188 Daraboina et al.;200 Ohno et al.193 Daraboina et al.;201 Ohno et al.147 Sa et al.202 Hong et al.203 Ferreira et al.;160 Xu et al.163 Kvamme and co-workers204, 205 Sa et al.;206 Park et al.;186 Ohno et al.;183 Daraboina et al.201 Daraboina et al.;201 Kumar et al.42 Kelland et al.;177 Seo et al.175 Nakarit et al.69 Lee et al.;168 Daraboina et al.;161 Kumar et al.42 Greaves et al.;207 Clarke and Bishnoi.208 Yang and Tohidi185 Walker et al.209 Varma-Nair et al.210 McNamee;126 Sharifi and Englezos;190 Daraboina and Linga;51 Lachance et al.;127 Duchateau et al.211 Mori and co-workers212-214 May et al.;215 Lou et al.189 Shin et al.;43 Li et al.;170 Wu et al.;187 Seo and Kang;181 Zheng et al.;216 Zheng et al.216 Zhao et al.46

2 53

ACS Paragon Plus Environment

Energy & Fuels

Page 54 of 54

1 2 3 1 4 2 Table 3. Experimental procedures commonly applied in gas hydrate studies and testing of KHIs. 5 Procedure/condition Key variable Comments 6 to monitor 7 Induction time Maintains a constant temperature and degree of subcooling from the 8 Isothermal 9 start of an experiment 10 Isothermal-isobaric Induction time Keeps both the system temperature and pressure constant for hydrate 11 formation 12 Constant cooling Hydrate formation Applies fixed cooling rates and allows the pressure to decrease with 13 temperature decreasing temperatures 14 Constant cooling-isobaric Hydrate formation Ensures a constant pressure along the cooling sequence and the 15 temperature hydrate formation process 16 Temperature ramping Hydrate formation Performs multiple cooling ramps with isothermal intervals in 17 temperature between 18 Induction time or hydrate Forms the hydrates, then melted, for repeated times, with the 19 Cooling-heating cycles formation temperature memory effect involved 20 21 Sudden cooling Hydrate formation Cools down the surrounding water jacket of the reactor rapidly and 22 temperature allows the reactor to cool down gradually into the hydrate region 23 Constant heating Decomposition temperature Decomposes slowly the formed hydrates and measures the hydrate 24 and pressure equilibrium data 25 3 26 27 4 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 54 58 59 60 ACS Paragon Plus Environment