Layered Heterostructured Lithium-Rich Oxide Nanowires as

Nov 8, 2017 - All Publications/Website .... Energy Storage Battery, National Base for International Science & Technology Cooperation, ... Storage & Co...
0 downloads 0 Views 12MB Size
Subscriber access provided by READING UNIV

Article

Spinel/Layered Heterostructured Lithium-Rich Oxide Nanowires as Cathode Material for High-Energy Lithium-Ion Batteries Ruizhi Yu, Xiaohui Zhang, Tao Liu, Li Yang, Lei Liu, Yu Wang, Xianyou Wang, Hongbo Shu, and Xiukang Yang ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.7b11942 • Publication Date (Web): 08 Nov 2017 Downloaded from http://pubs.acs.org on November 8, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 43

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Spinel/Layered Heterostructured Lithium-Rich Oxide Nanowires as Cathode Material for High-Energy Lithium-Ion Batteries Ruizhi Yu, Xiaohui Zhang, Tao Liu, Li Yang, Lei Liu, Yu Wang, Xianyou Wang,∗ Hongbo Shu, Xiukang Yang (National Local Joint Engineering Laboratory for Key Materials of New Energy Storage Battery, National Base for International Science & Technology Cooperation, Hunan Province Key Laboratory of Electrochemical Energy Storage & Conversion, School of Chemistry, Xiangtan University, Xiangtan 411105, Hunan, China) ABSTRACT: Lithium-rich oxide material has been considered as an attractive candidate of high energy cathode for lithium-ion batteries (LIBs). However, the practical applications are still hindered due to its low initial reversible capacity, severe voltage decaying and unsatisfactory rate capability. Among all, the voltage decaying is a serious barrier which results in a large decrease of energy density during long term cycling. In order to overcome these issues, herein an efficient strategy of fabricating lithium rich oxide nanowires with spinel/layered heterostructure is proposed. Structural characterizations verify that the spinel/layered heterostructured nanowires are self-assembly of a lot of nanoparticles, and the Li4Mn5O12 spinel phase is embedded inside the layered structure. When the material is used as cathode of LIBs, the spinel/layered heterostructured nanowires can display an extremely high invertible capacity of 290.1 mA h g-1 at 0.1 C and suppressive voltage fading. Moreover, it exhibits a favorable cycling stability with capacity retention of 94.4 % after charging/discharging at 0.5 C for 200 cycles, and it shows extraordinary rate capability (183.9 mA h g-1, 10 C). The remarkable electrochemical properties can be connected with the spinel/layered heterostructure, which is in favor of Li+ transport kinetics and enhancing structural stability during cyclic process. KEYWORDS: lithium ion batteries, lithium-rich oxide nanowires, spinel/layered heterostructure, mitigated voltage fading, high rate capability



Corresponding author: Xianyou Wang, Tel: +86 731 58293377; Fax: +86 731 58292052.

E-mail address: [email protected] 1

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 43

1. INTRODUCTION Lithium-rich layered oxides (LLOs) have been extensively investigated over the last decades since these materials were first reported as cathodes of the Lithium ion batteries (LIBs) by Thackeray and Dahn.1-8 LLOs seem to be the most commercially valued candidate for next generation high energy density LIBs on account of their considerable reversible capacity of 250-300 mA h g-1 and extremely high working voltage of high than 4.5 V. The extremely high reversible capacity mainly derive from two mechanisms: one is the process of manganese redox (Mn3+/Mn4+), and the other is the reversible anionic redox reactions (O2-/O22- or O2-/O2n-, where 1