Low Pressure CO2 Hydrogenation to Methanol over Gold

Jul 28, 2015 - The TPR results of the activity and selectivity in converting CO2 to CO and methanol are compared in Figure 2 for the surfaces of Au/Ti...
7 downloads 7 Views 2MB Size
Page 1 of 15

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of the American Chemical Society

Low pressure CO2 hydrogenation to methanol over gold nanoparticles activated on a CeOx/TiO2 interface Xiaofang Yang,1 Shyam Kattel,1 Sanjaya D. Senanayake,1 J. Anibal Boscoboinik, 2 Xiaowa Nie,3 Jesús Graciani, 4 José A. Rodriguez,1 Ping Liu,1 Darío J. Stacchiola1,* and Jingguang G. Chen1,5,* 1

2

Chemistry Department, Brookhaven National Laboratory, Upton, NY 11973 Center for Functional Nanomaterials (CFN), Brookhaven National Laboratory, Upton, NY 11973 3 Dalian University of Technology, Dalian 116024, Liaoning Province, China 4 Department of Physical Chemistry, University of Seville, E-41012, Seville, Spain 5

Department of Chemical Engineering, Columbia University, NY 10027

ABSTRACT: Capture and recycling of CO2 into valuable chemicals such as alcohols could help mitigate its emissions into the atmosphere. Due to its inert nature, the activation of CO2 is a critical step in improving the overall reaction kinetics during its chemical conversion. Although pure gold is an inert noble metal and cannot catalyze hydrogenation reactions, it can be activated when deposited as nanoparticles on the appropriate oxide support. In this combined experimental and theoretical study, it is shown that an electronic polarization at the metal-oxide interface of Au nanoparticles anchored and stabilized on a CeOx/TiO2 substrate generates active centers for CO2 adsorption and its low pressure hydrogenation, leading to a higher selectivity towards methanol. This study illustrates the importance of localized electronic properties and structure in catalysis for achieving higher alcohol selectivity from CO2 hydrogenation. A rising CO2 concentration in the atmosphere has led to concerns about adverse global climate changes and ocean acidification. 1 A potential way to alleviate this problem is to capture and convert a fraction of the emitted CO2 into inexpensive and readily available feedstock to produce chemicals or fuels. 2,3 For instance, a number of valuable chemicals can be produced from CO2, including short-chain olefins (ethylene and propylene), syngas (CO and H2, co-fed with methane), formic acid, methanol, dimethyl ether, and other hydrocarbons. Two of the most attractive routes involve reaction with H2, generated from renewable sources, to convert CO2 into CO through the reverse water gas shift (RWGS) reaction 4 and to directly synthesize methanol through further CO hydrogenation. 1,5,6 Due to the high thermodynamic stability of CO2, splitting of a C-O bond in the molecule is characterized by a high energy barrier. Thus, effective activation of CO2 is a critical step in improving the overall reaction kinetics of the process. It has been proposed that activation of CO2 occurs at the oxide support or the interfacial sites between the active metal and the oxide support. 7 Here, we will explore in detail the interaction of CO2 with Au nanoparticles supported on CeOx/TiO2 using a combination of ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and calculations based on density functional theory (DFT). Metal oxides form a major category of active support materials and their capability to activate CO2 largely depends on their basicity and reducibility. 8-14 Reduced oxides have a strong tendency to react with CO2 or H2O, even causing direct C-O or H-O bond scission. Thus, stabilizing

the reduced states of oxides can greatly impact their surface chemistry and catalytic activity for CO2 activation. Previous studies of the CeOx/TiO2 system have shown that at small coverages of ceria, the CeOx nanoparticles at TiO2(110) favor Ce3+ cations. 12,15 Meanwhile, the Ce3+ sites interact extensively with admetals (Pt, Cu and Au) through electronic metal–support interactions, causing high dispersion of the active metals and changing their chemical activity. 14 While bulk gold is catalytically inert, Au nanoparticles can be very active when deposited on oxides.16-21. The formation of multifunctional active sites at the metal/oxide interface can impact the activity and selectivity of catalytic reactions. An example of the highly important role of the interfacial sites can be seen from a recent study of CO2 hydrogenation over CeOx/Cu(111).22 The interfacial sites between CeOx and Cu provide a unique capability to stabilize a carboxylate (CO2δ-) intermediate and the subsequent hydrogenation steps also become facile and are characterized by relatively small activation energies (