Mass Exchange and Equilibration Processes in AOT Reverse Micelles

Jan 24, 2018 - Reverse micelles (RMs) made with sodium bis(2-ethylhexyl)sulfosuccinate suspended in isooctane are commonly used experimental models of...
2 downloads 6 Views 828KB Size
Subscriber access provided by MT ROYAL COLLEGE

Article

Mass Exchange and Equilibration Processes in AOT Reverse Micelles Gozde Eskici, and Paul H Axelsen Langmuir, Just Accepted Manuscript • DOI: 10.1021/acs.langmuir.7b04192 • Publication Date (Web): 24 Jan 2018 Downloaded from http://pubs.acs.org on January 30, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Langmuir is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

Mass Exchange and Equilibration Processes in AOT Reverse Micelles Gozde Eskici† and Paul H Axelsen‡* †Department of Biochemistry & Biophysics, University of Pennsylvania Perelman School of Medicine, Philadelphia 19104, United States ‡Departments of Pharmacology, Biochemistry and Biophysics, and Medicine, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States * Correspondence to: Paul H Axelsen ([email protected]) Keywords: molecular dynamics simulation, amyloid beta protein, Alzheimer’s disease, fusion, fission Contact information: Dr. Paul H Axelsen Departments of Pharmacology, Biochemistry & Biophysics, and Medicine University of Pennsylvania 1009C Stellar Chance Laboratories 422 Curie Blvd Telephone: 215-898-9238 Philadelphia, Pennsylvania, 19104-6059 E-mail: [email protected]

ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 24

Abstract Reverse micelles made with sodium bis(2-ethylhexyl) sulfosuccinate suspended in isooctane are commonly used experimental models of aqueous microenvironments. However, there are important unanswered questions about the very characteristic that makes them of interest, namely their size. To explore the factors that determine the size of reverse micelles, all-atom molecular dynamics simulations of reverse micelles with different sizes but the same water-loading ratio were performed. An Anton 2 machine was used so that systems of the necessary size could be extended into the microsecond timescale and mass exchange processes could be observed. Contrary to hypothesis, there were no net gains or losses of water by diffusion between reverse micelles of different size. However, gains and losses did occur following fusion events. RM fusion followed RM contact only when waters were present among the hydrophobic surfactant chains at the point of contact. The presence of an encapsulated 40-residue amyloid beta peptide did not directly promote reverse micelle fusion, but it quickly and efficiently terminated each fusion event. Before fusion terminated, however, the size of the peptide-containing reverse micelle increased without a corresponding change in its water loading ratio. We conclude that mass transfer between reverse micelles is most likely accomplished through transient fusion events, rather than through the diffusion of component molecules through the organic phase. The behavior of the amyloid beta peptide in this system underscores its propensity to embed in, and fold in response to, multiple interactions with the surfactant layer. Introduction Reverse micelles (RMs) made with sodium bis(2-ethylhexyl) sulfosuccinate (AOT), suspended in isooctane (isoO), are characterized by a water-loading ratio (𝑾𝑾𝟎𝟎 ) that determines their size. The distribution of RM sizes for any given 𝑊𝑊0 is narrow,1-8 but the precise value of their mean size, and the forces determining that size, remain unclear. Recent molecular dynamics simulation studies aimed at reaching an atomic-level understanding of these forces have yielded a relationship between equilibrium RM size and 𝑾𝑾𝟎𝟎 that helps reconcile a large body of otherwise inconsistent experimental data.9 A logical next step in these investigations is to test whether this relationship predicts the net movement of exchangeable components between RMs in a non-equilibrium system, and to examine the mechanism by which exchange is accomplished. It has been proposed that RMs exchange material through repeated cycles of fusion and fission.10 Alternatively, the formation of transient “channels” between RMs has been proposed.11,12 Prior simulation studies in this lab have suggested that RM components may escape into the organic phase and diffuse back into an RM.9 The effect of encapsulated peptides and proteins on RM size is also of interest, because RMs are frequently used as experimental models of crowded biological microenvironments such as membranous organelles, intercellular spaces, and the interior of macromolecular chaperones in which proteins function.13-15 Despite their popularity for this purpose, some basic questions persist without a definitive answer. For example, do RMs increase in size when they encapsulate a protein, or does the protein merely displace water and lower the 𝑾𝑾𝟎𝟎 ? Does an increased RM size imply an increased amount of surfactant, or can an amphipathic peptide substitute for surfactant on an RM surface? Simulation systems large enough to address these questions require enormous computational resources to extend over meaningful time intervals. Recently, a next generation Anton machine (Anton 2) has become available, which is capable of simulating multi-RM systems on a multi-microsecond timescale. The present study used such a machine to examine mass exchange behavior in non-equivalent RM pairs: a smaller, a larger, a samesize, and a peptide-containing RM were paired with an RM presumed to represent the equilibrium size for an RM with 𝑾𝑾𝟎𝟎 = 11.4. The peptide was the 40-residue amyloid beta (Aβ40) peptide that aggregates in Alzheimer’s disease, and which exhibits intriguing folding behaviors in RMs.16

Results show that RM pairs do exchange abundant material on the microsecond timescale by diffusion through the organic phase, but this process does not result in any net gains or losses. Instead, multiple

ACS Paragon Plus Environment

Page 3 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

fusion/fission events were observed, and the encapsulated peptide was consistently involved in terminating fusion and/or promoting fission.

Methods Software, Hardware, and Parameters: Minimizations and preliminary equilibrations were performed with NAMD2.917 and the CHARMM27 all atom force field for proteins and lipids18 on a 16-node Linux cluster . Secondary 30 ns equilibrations were performed with NAMD 2.9 on the Bridges system provided by the Extreme Science and Engineering Discovery Environment (XSEDE) as described previously.9,16 Production simulations were performed at 293 K using the Nosé-Hoover thermostat and the MTK barostat on an Anton 2 supercomputer19 (also on the Bridges system). The cutoff for van der Waals (VdW) and short-range electrostatic interactions was 9.79 Å. Long-range electrostatic interactions were computed using the Gaussian split Ewald method.20 Coordinates were saved every 0.24 ps. System Design, Equilibration, and Simulation: RMs were constructed with 𝑾𝑾𝟎𝟎 = 𝟏𝟏𝟏𝟏. 𝟒𝟒, the same ratio used in earlier experimental studies.21 Equation 7-e in an earlier theoretical study9 indicates that the number of AOT molecules per RM (𝒏𝒏𝑨𝑨𝑨𝑨𝑨𝑨 ) should be 127. The number of water molecules (𝒏𝒏𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘 ) is therefore given by 𝑾𝑾𝟎𝟎 × 𝒏𝒏𝑨𝑨𝑨𝑨𝑨𝑨 = 𝟏𝟏𝟏𝟏𝟏𝟏𝟏𝟏. This RM was designated type “N”. A smaller RM with 𝒏𝒏𝑨𝑨𝑨𝑨𝑨𝑨 = 𝟔𝟔𝟔𝟔 and 𝒏𝒏𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘 = 𝟕𝟕𝟕𝟕𝟕𝟕 was designated type “S”, and a larger RM with 𝒏𝒏𝑨𝑨𝑨𝑨𝑨𝑨 = 𝟏𝟏𝟏𝟏𝟏𝟏 and 𝒏𝒏𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘 = 𝟐𝟐𝟐𝟐𝟐𝟐𝟐𝟐 was designated type “L”. To construct each RM, a spherical cluster of 𝒏𝒏𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘 + 𝒏𝒏𝑨𝑨𝑶𝑶𝑻𝑻 water molecules was created with the VMD SOLVATE plugin.22 AOT molecules were added by replacing 𝒏𝒏𝑨𝑨𝑨𝑨𝑨𝑨 randomly selected water molecules with sodium cations, and distributing the anionic portions randomly on the surface of the cluster with SO3 headgroups oriented inward. To construct an RM of type N with an Aβ40 peptide (designated type “Np”), the peptide was created as an extended linear chain with Pymol 1.8,23 energy minimized in vacuo with NAMD, and solvated in a spherical cluster of 1578 water molecules. AOT molecules were added by replacing 127 randomly selected water molecules with sodium cations, and distributing the anionic portions randomly on the surface of the cluster with SO3 groups oriented inward. Three randomly selected water molecules were replaced with sodium cations to neutralize the –3 charge of the peptides. Therefore, 𝑛𝑛𝑤𝑤𝑤𝑤𝑤𝑤𝑤𝑤𝑤𝑤 = 1448 in this system.

The four RM types described above (N, L, S, and Np) were then placed as pairs, in a 130 Å x 165 Å x 130 Å unit cell, as far apart as possible. One system (designated “NS”) contained one type N and one type S RM. A second system (designated “NN”) contained two type N RMs. A third RM system (designated “NL”) contained one type L and one type N RM. A fourth system (designated “NNp”) contained one type N and one type Np RM. Isooctane (isoO) molecules (n𝐼𝐼𝐼𝐼𝐼𝐼 ) were added to each system such that the isoO mass was 84% of the total system. This percentage corresponds to an RM-forming portion of the AOT/water/isoO phase diagram.24 The compositions of the four systems are summarized in Table 1. All four systems were equilibrated in four stages, each stage consisting of 0.01 ns of minimization and 1 ns of NPT simulation. In stage 1, all atoms except those in the isoO solvent were fixed in position. In stage 2, the hydrocarbon chains of the AOT anions were released. In stage 3, the remaining portions of the AOT anions were released. In stage 4, water and sodium cations were released. The NNp system was subjected to two additional stages of minimization: stage 5, in which side chains of protein were released, and stage 6 in which all molecules in the system were released. After energy minimization, all four systems were conditioned by simulation as NPT ensembles for 30 ns using NAMD 2.9, to eliminate instabilities that cause them to crash with “momentum exceeded” errors on Anton 2. Simulation durations are summarized in Figure 1, and 14.1 µsec of trajectory were generated with a 330,000 service unit allocation award from the Pittsburgh Supercomputer Center. Analysis: Interaction energies for each saved coordinate set were calculated using the VMD plugin NAMD ENERGY, and the same parameters used to create the trajectory. Accordingly, VMD and NAMD yield the same energies for any given structure. The VMD plugin SASA with a 1.4 Å solvent probe was used to calculate solvent accessible surface areas.

ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 24

The extent of water exchange between the RMs in each system was calculated for each RM as a fractional approach to complete mixing, 𝑓𝑓𝑐𝑐𝑐𝑐 (𝑡𝑡), using equation 1: 𝑓𝑓𝑐𝑐𝑐𝑐 (𝑡𝑡) = 1 −

𝑛𝑛𝑜𝑜𝑜𝑜𝑜𝑜 (𝑡𝑡) 𝑛𝑛𝑤𝑤𝑤𝑤𝑤𝑤𝑤𝑤𝑤𝑤 − 𝑛𝑛𝑐𝑐𝑐𝑐

(1)

where 𝑛𝑛𝑜𝑜𝑜𝑜𝑜𝑜 (𝑡𝑡) is the number of water molecules originally in the RM that had left at time t, and 𝑛𝑛𝑐𝑐𝑐𝑐 is the number of waters originally in an RM that are expected to be in that RM after complete mixing has occurred. The value of 𝑛𝑛𝑐𝑐𝑐𝑐 is 241, 965, 1330 for S, N, and L systems respectively. The mixing rate, (𝑘𝑘), is the negative slope of 𝑙𝑙𝑙𝑙𝑙𝑙|𝑓𝑓𝑐𝑐𝑐𝑐 (𝑡𝑡)| versus 𝑡𝑡.

To represent the sequence of events during RM fusion quantitatively, portions of the NN and NNp trajectories were analyzed at 4.8 ps intervals. The extent of mixing was quantified by considering each molecule in 4 component groups (water, sodium ion, AOT headgroup, AOT hydrocarbon chains) of each RM, and counting the number of molecules from the same component group within 5 Å that originated in the other RM. Thus, these counts are zero before contact, and they reach a maximum upon thorough random mixing. Results for each component group were summed and then normalized by their maximum values. To represent the events during RM fission after a fusion, the same counts were made except that the number of molecules from the same component group that ended up in the other RM were counted. Results Conditioning The total energies and volumes of each simulation system reached plateau values early in the 30 ns conditioning periods. Simulations on Anton 2 are susceptible to “overflow errors” if not suitably conditioned, however, and extending the conditioning periods to 30 ns eliminated such errors. Therefore, each system was well conditioned with respect to total energy and volume when the Anton 2 simulations began. There was no water exchange between RMs during the conditioning period, although a few water molecules from each system had diffused out of the RM and into the isoO phase. Non-contact water exchange As the simulations progressed, each RM deviated markedly from its original spherical shape, which increased its surface-area-to-volume ratio. As a consequence, gaps large enough to pass a water molecule were frequently observed between surfactant molecules, enabling direct contact between isoO molecules and components of the RM core. The surface area of water and sodium ions accessible to a 1.4 Å probe (i.e. the area of gaps in the surfactant layer) as percentage of total RM surface area is shown in Figure 2. The gap area percentage for the type L RM is significantly larger than for other types, most likely because it tended to deviate from a spherical shape to a greater extent. Water molecules periodically entered and exited through these gaps, facilitating the exchange of water molecules between RMs without contact between the surfactant layers, i.e. non-contact water exchange. To characterize the rate of non-contact water exchange, the fractional approach to complete mixing (equation 1) was plotted over time for each RM (Figure 3), and fitted to an exponential to obtain a mixing rate, k. The mixing rates for all 8 RM types in all 4 systems were indistinguishable, ~9 × 104 𝑠𝑠 −1 (Table 2). This rate suggests that 7700 ns would elapse before mixing was half-way complete. Contact-mediated exchange

“Contact” between RMs is defined as a repulsive VdW interaction between the any two AOT atoms from different RMs. By this definition, contact between RMs was observed frequently in all 4 simulation systems (Figure 4). Most instances of contact did not result in disruption of the RM surface, or in the exchange of surfactant molecules or RM contents. However, one contact event in the NN system after 2800 ns did result in RM fusion and extensive mixing of RM contents. This event began with AOT “chain mixing”, defined as occurring when the distance between AOT headgroups in two different RMs is less than twice the average ACS Paragon Plus Environment

Page 5 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

thickness of the AOT hydrocarbon chains (Figure 5a). Chain mixing was followed almost immediately by “water bridge formation”, defined as a continuous single-file line of water molecules extending between the two RM cores (Figure 5b). After water bridge formation, “AOT reorientation” occurred, in which some of the AOT molecules in each RM rotated so that their headgroups were oriented towards waters in the bridge (i.e., Figure 5c). Additional AOT molecules were recruited and reoriented as the water bridge expanded into an open pore (Figure 5d). A noteworthy feature of contact-mediated exchange was that the first waters to exchange, and the waters comprising the water bridge, were waters that had been situated in the surfactant layer at the point and time of contact, i.e. these waters were adjacent to hydrophobic AOT chains rather than in the RM core. This observation suggests that the extent of surfactant layer hydration may determine whether RM contact leads to contents mixing. In the NNp system, there were seven distinct fusion and fission events, enabling an analysis of the mechanisms that were common to all seven events (Figure 4). Each fusion event was only “partial” in the sense that it did not involve a complete loss of distinction between the original RMs. Accordingly, one may view “fission” as the premature termination of fusion. Each fusion event followed the stereotypical sequence described for the NN system: contact, chain mixing, water bridge formation, and AOT reorientation (Figure 5a-d). As noted in the NN system, fusion events tended to follow contact when the surfactant chains at the point of contact were hydrated. Consequently, the interval between contact, chain mixing, and water bridge formation was negligible. To quantify the extent of contents mixing over time, a counting algorithm was applied. Waters, for example, were designated either red or blue prior to each mixing event (as in figure 5). The number of red waters within 5 Å of each blue water, and the number of blue waters within 5 Å of each red water, were counted at each time point. These counts were zero at time = 0, defined as the end of simple contact and the beginning of chain mixing. Analogous counts were made for AOT headgroups, AOT chains, and sodium cations. The counts for each event were normalized so that the maximum count following each fusion event was 1.0. The termination of fusion was characterized similarly, except that time = 0 (when counts were set to zero) was defined as the end of chain mixing and only simple contact was occurring. The results for the 7 fusion events were averaged and plotted in figure 6. For each fusion event, the intervals between contact, chain mixing, and water bridge formation were negligible (Figure 6a,c). AOT reorientation occurred 7-8 ns after contact (Figure 6b). The water molecules that exchanged in each of these events tended to exchange within another 2-3 ns (Figure 6d). Sodium ion exchange lagged well behind water exchange, and was not complete until 25 ns after contact (Figure 6c). AOT molecules that exchanged lagged even further, requiring ~50 ns after contact to complete (Figures 6a,b). The sequence of events that terminated fusion (i.e. fission) did not correspond to the reverse of events that started fusion. The exchange of AOT headgroups and chains did slow as a constriction developed around the aqueous pore (Figure 6e,f). However, water exchange declined well before sodium ion exchange (Figures 6g,h). The late decline of sodium ion mixing appears due to the association of sodium ions with the negatively charged AOT headgroups along the water bridge. Termination of the water bridge occurred well before AOT reorientation (Figures 6f-h). Although each instance of fission proceeded through AOT reorientation (Figure 5g) to a point where the two RMs were merely in contact, the AOT chains from each RM remained in contact with a small amount of chain mixing (figure 6e) until the next contents mixing event started. As indicated in figure 4, there were many instances of contact without contents mixing. Two factors were investigated to identify the conditions that caused RM contact to advance to contents mixing. One factor was the number of AOT molecules involved in the contact interface, i.e. the size of the contacting surface. However, the number of AOT involved in any given contact event did not correlate with contents mixing (Figure 7). A second factor was the amount of water present among the AOT molecules making contact. As shown in figure 8, the number of water molecules within 5 Å of an AOT molecule involved in the contact interface was consistently greater (>10) when contact was followed by contents mixing. These results are consistent with the aforementioned observation, that hydration of the surfactant layer in the vicinity of contact appears to determine whether contact led to contents mixing.

ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 24

Content-mixing events in the NNp system resulted in the formation of two RMs with significantly different sizes (Figure 9). The 𝒏𝒏𝑨𝑨𝑨𝑨𝑨𝑨 and 𝑾𝑾𝟎𝟎 of the peptide-containing RM increased with the first contents-mixing event, although the 𝑾𝑾𝟎𝟎 trended lower with subsequent contents-mixing events. The two RMs in this system exhibited transient electrostatic imbalances, but no distinct trend. Polypeptide effects and behavior

In the NNp system, the peptide-containing RM was initialized by simply adding the peptide to the core; there were no waters deleted or AOT molecules added. The peptide-containing RM responded initially by recruiting both water and AOT from the other RM during the first fusion event. However, it subsequently lost water to restore its original 𝑾𝑾𝟎𝟎 value (Figure 9).

The behavior of the Aβ40 peptide in the first 2.3 µsec of this 5.1 µsec simulation was similar in most respects to its behavior in the 3.0 µsec simulation previously described.16 However, two additional and remarkable behaviors were noted after 2.3 µsec in the current simulation. First, residues 21-24 formed a loop of α-helix at 2.1 µsec. By 3.4 µsec, this loop had extended to residues 21-31 and 3 loops of α-helix, which persisted throughout the remainder of the simulation. Second, neither the helix, nor any other portion of the Aβ40 peptide, was directly involved in any of the seven fusion events. However, each fusion event was terminated by movement of the αhelix into the fusion pore. Indeed, diffusion of the entire C-terminal portion of Aβ40 appeared to be the trigger for pore constriction in each of the seven observed instances (Figure 5e). As previously reported,16 the side chains of residues Phe19 and Phe20 were anchored into the surfactant layer and formed a β turn, while those of Phe4, Leu17, Ile31, Ile32, and Leu34 anchored into the surfactant individually (Figure 10). Discussion

These studies reveal a remarkable and unexpected involvement of the Aβ40 peptide in the termination of RM fusion events. All seven instances of RM fusion were terminated by diffusion of the C-terminal 20 residues of Aβ40 into the fusion pore, which then sterically prevented the diffusion of water through the pore. In each case, the large hydrophobic side chains of Aβ40 were oriented away from the aqueous core and embedded among the AOT chains. This behavior is significant because it highlights the potential for interactions between Aβ40 and lipid membranes that mediate its transport, folding, or toxicity. All but one of the observed fusion events in these simulations occurred in the peptide-containing system, which may have had more fusion events merely because the simulation was longer. The results appear to disprove hypotheses that RMs of different size (NS and NL systems) are more likely to undergo fusion, but this hypothesis may have been best addressed an “SL” system, had resources been available to create one. The Aβ40 peptide appeared to have no direct involvement in initiating any of the RM fusion events, although indirect effects mediated through the water or surfactant cannot be ruled out. A stereotypical series of steps at the initiation of RM fusion was briefly described for a series of self-assembling 𝑾𝑾𝟎𝟎 = 5 systems.25 One of these steps involved a sodium ion interacting simultaneously with the water of two different RMs before water bridge formation. In contrast, sodium ions lagged considerably behind water bridge formation in the current simulations. Since the previously reported simulations were of similar overall size, 0.9-1.0 µsec in duration, and they used the same AOT and isoO parameters as the current simulations, it is possible that the difference was due to the use of an SPC/E water model or the different computational platform used for the earlier simulations. However, it seems most likely that relatively little water in the 𝑾𝑾𝟎𝟎 = 5 systems led to an earlier participation of components other than water in fusion events.

As outlined by Luisi and Magid,26 three distinct schemes for accommodating proteins into RMs have been considered: (a) displacement of water in the RM core, resulting in a decrease in 𝑾𝑾𝟎𝟎 but no change in RM dimensions; (b) addition of peptide volume to the RM core volume, with the recruitment of AOT from other RMs, a decrease in 𝑾𝑾𝟎𝟎 , and an increase in RM dimensions, or (c) the recruitment of both water and AOT from other RMs, resulting in an increase in RM dimensions but no change in 𝑾𝑾𝟎𝟎 . Experimental evidence for scheme (a) has been provided by Levashov et al.,27 and Zampieri at al.,28 who found that RMs containing α-chymotrypsin did not change in size or 𝑛𝑛𝐴𝐴𝐴𝐴𝐴𝐴 , but exhibited lower 𝑾𝑾𝟎𝟎 values. ACS Paragon Plus Environment

Page 7 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

If protein encapsulation leads to a lower 𝑾𝑾𝟎𝟎 , however, it raises questions about whether sufficient water remains in the RM to solubilize both the protein, and the sodium ions that are required for electrostatic balance of the AOT anions. Prior simulation studies have shown that the shielding of charges within an RM by water is one of the largest energetic considerations in the thermodynamics of RM formation.9 Therefore, the need for hydration water and its dielectric effects may be an important thermodynamic driving force opposing the reduction of 𝑾𝑾𝟎𝟎 in both a protein-containing RM and an empty RM. One may also expect that the encapsulated protein has its own requirements for hydration water, which would increase both 𝑾𝑾𝟎𝟎 and RM size. Secondary structure formation by a polypeptide chain is an efficient means to eliminate unmatched hydrogen bond donor/acceptor pairs, and the formation of α-helical structure in the NNp system may reflect the need to eliminate such unmatched pairs when hydration water is severely limited. Alternatively, excluded volume effects may be particularly effective at inducing secondary structure formation within the confines of an RM, or the various sidechain and surfactant interactions described above may contribute. The relative contributions of such factors cannot be distinguished in simulations such as these, which were not designed for this type of analysis. It is clear that the net transfer of components between RMs has not reached an equilibrium condition by the end of the 5.1 µsec NNp simulation, but trends suggest that the peptide-containing RM will have a significantly larger 𝒏𝒏𝑨𝑨𝑨𝑨𝑨𝑨 than the empty RM, and that 𝑾𝑾𝟎𝟎 will be unchanged. These observations support scheme (c) of Luisi and Magid, and are consistent with an experimental study of myoglobin by Murakami et al.29 Differences among the various published experimental results may be due to differences in the size and other physicochemical properties of the proteins being encapsulated. Differences between experimental and these simulation results may arise because there was only one empty RM with which the peptide-containing RM may equilibrate in these simulations, rather than the semi-infinite ensemble available in an experimental system. Another unexpected finding in these simulations was that no net water exchange occurred between RMs of different sizes. It was hypothesized that the net transfer of water between RMs would occur via non-contact exchange, such that RMs that were too large or small for the 𝑾𝑾𝟎𝟎 of the system would compensate with a net loss or gain of water. This hypothesis was disproved by finding that mixing rates were identical for all RM sizes. Identical mixing rates, despite marked differences in size, also suggest that the larger gap percentage for the RM of type L (Figure 2) did not lead to faster losses than the RM of type N, with which it was paired. Experimentally-determined exchange rates have been reported from several labs, but comparisons to the simulation-derived mixing rate in this work are tenuous because of differences in the nature of the experimental data, the choice of mathematical model employed, and the system composition. In addition, rates of this nature are sensitive to experimental conditions such as solvent, temperature, and W0.30 For example, Johannsson et al. determined an exchange rate of 3 × 106 𝑠𝑠 −1 from phosphorescence decay curves in RM suspensions with and without quencher.31 However, experimentally-determined exchange rates must necessarily reflect all exchange mechanisms, not merely the non-contact diffusive mechanism, so it is not surprising that this experimental measurement is ~30-fold larger than the simulation result. It should be noted that the rate of non-contact exchange suggested by the simulations is not negligible, as commonly assumed when interpreting the data from some experimental studies.10 Conclusions Mass exchange and equilibration processes in RMs proceeded more efficiently via transient fusion-fission events than via diffusion through the organic phase, which is consistent with early inferences from experimental studies.10 The factor that appears to determine whether RM-RM contact evolves into fusion with mixing of contents is the degree to which water molecules are present in the surfactant layer at the point of contact. Contrary to expectation, net mass exchange via diffusion could not be demonstrated between RMs of different size in these systems. Peptide encapsulation caused RM size to increase, without a change in 𝑾𝑾𝟎𝟎 . At least 7 large hydrophobic side chains of encapsulated Aβ40 were persistently embedded in the surfactant, attesting to the affinity of this peptide for membranes. Aβ40 had no apparent role in initiating RM fusion, but it efficiently terminated fusion events soon after they began by diffusing into the fusion pore. Insight into the microsecond-timescale events comprising these processes was made possible by access to an Anton 2 machine which, compared to a first generation Anton machine, was able to accommodate the larger ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 24

systems involved, for meaningful lengths of time. Nevertheless, still longer simulations will be required to reach equilibrium conditions and clarify the relationship between RM size and 𝑾𝑾𝟎𝟎 . Acknowledgements This work was supported by grants from the NIH (GM76201) and the Alzheimer’s Association (to P.H.A.). It made use of the Extreme Science and Engineering Discovery Environment (XSEDE), supported by National Science Foundation grant number OCI-1053575, and the Bridges system at the Pittsburgh Supercomputing Center (PSC) supported by NSF award number ACI-1445606. Access to the Anton machine was made possible by the National Center for Multiscale Modeling of Biological Systems through grant number MCB150023P from the Pittsburgh Supercomputing Center.

ACS Paragon Plus Environment

Page 9 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

References (1) (2)

(3) (4) (5)

(6) (7)

(8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18)

(19)

(20) (21)

(22)

Ricka, J.; Borkovec, M.; Hofmeier, U. Coated Droplet Model of Microemulsions - Optical Matching and Polydispersity. J. Chem. Phys. 1991, 94, 8503-8509. Amararene, A.; Gindre, M.; Le Huerou, J. Y.; Urbach, W.; Valdez, D.; Waks, M. Adiabatic compressibility of AOT [sodium bis(2-ethylhexyl)sulfosuccinate] reverse micelles: Analysis of a simple model based an micellar size and volumetric measurements. Phys. Rev. E 2000, 61, 682-689. Kotlarchyk, M.; Chen, S. H.; Huang, J. S. Temperature-Dependence of Size and Polydispersity in A 3Component Micro-Emulsion by Small-Angle Neutron-Scattering. J. Phys. Chem. 1982, 86, 3273-3276. Kotlarchyk, M.; Chen, S. H.; Huang, J. S.; Kim, M. W. Structure of 3-Component Microemulsions in the Critical Region Determined by Small-Angle Neutron-Scattering. Phys. Rev. A 1984, 29, 2054-2069. Robertus, C.; Philipse, W. H.; Joosten, J. G. H.; Levine, Y. K. Solution of the Percus-Yevick Approximation of the Multicomponent Adhesive Spheres System Applied to the Small-Angle X-RayScattering from Microemulsions. J. Chem. Phys. 1989, 90, 4482-4490. Farago, B.; Richter, D.; Huang, J. S.; Safran, S. A.; Milner, S. T. Shape and Size Fluctuations of Microemulsion Droplets - the Role of Cosurfactant. Phys. Rev. Lett. 1990, 65, 3348-3351. Robinson, B. H.; Toprakcioglu, C.; Dore, J. C.; Chieux, P. Small-Angle Neutron-Scattering Study of Microemulsions Stabilized by Aerosol-Ot .1. Solvent and Concentration Variation. J. Chem. Soc. Farad. Trans. I 1984, 80, 13-27. Yan, Y. D.; Clarke, J. H. R. Dynamic Light-Scattering from Concentrated Water-In-Oil Microemulsions the Coupling of Optical and Size Polydispersity. J. Chem. Phys. 1990, 93, 4501-4509. Eskici, G.; Axelsen, P. H. The Size of AOT Reverse Micelles. J. Phys. Chem. B 2016, 120, 11337-11347. Fletcher, P. D. I.; Howe, A. M.; Robinson, B. H. The Kinetics of Solubilisate Exchange Between Water Droplets of A Water-In-Oil Microemulsion. J. Chem. Soc. Farad. Trans. I 1987, 83, 985-1006. Jada, A.; LANG, J.; Zana, R. Relation Between Electrical Percolation and Rate-Constant for Exchange of Material Between Droplets in Water in Oil Microemulsions. J. Phys. Chem. 1989, 93, 10-12. Howe, A. M.; Mcdonald, J. A.; Robinson, B. H. Fluorescence Quenching As A Probe of Size Domains and Critical Fluctuations in Water-In-Oil Microemulsions. J. Chem. Soc. Farad. Trans. I 1987, 83, 1007-1027. Walde, P.; Giuliani, A. M.; Boicelli, C. A.; Luisi, P. L. Phospholipid-Based Reverse Micelles. Chem. Phys. Lipids 1990, 53, 265-288. Zhou, H. X. Protein folding in confined and crowded environments. Arch. Biochem. Biophys. 2008, 469, 76-82. Yeung, P. S. W.; Eskici, G.; Axelsen, P. H. Infrared spectroscopy of proteins in reverse micelles. BBA Biomemb. 2013, 1828, 2314-2318. Eskici, G.; Axelsen, P. H. Amyloid Beta Peptide Folding in Reverse Micelles. J. Am. Chem. Soc. 2017, 139, 9566-9575. Phillips, J. C.; Braun, R.; Wang, W.; Gumbart, J.; Tajkhorshid, E.; Villa, E.; Chipot, C.; Skeel, R. D.; Kale, L.; Schulten, K. Scalable molecular dynamics with NAMD. J. Comp. Chem. 2005, 26, 1781-1802. Foloppe, N.; MacKerell, A. D., Jr. All-atom empirical force field for nucleic acids: I. Parameter optimization based on small molecule and condensed phase macromolecular target data. J. Comp. Chem. 2000, 21, 86-104. Shaw, D. E.; Grossman, J. P.; Bank, J. P.; Batson, B.; Butts, J. A.; Chao, J. C.; Deneroff, M. M.; Dror, R. O.; Even, A.; Fenton, C. H. Anton 2: raising the bar for performance and programmability in a specialpurpose molecular dynamics supercomputer. IEEE 2014, 2014, 41-53. Shan, Y. B.; Klepeis, J. L.; Eastwood, M. P.; Dror, R. O.; Shaw, D. E. Gaussian split Ewald: A fast Ewald mesh method for molecular simulation. J. Chem. Phys. 2005, 122, 054101-1-054101-13. Yeung, P. S. W.; Axelsen, P. H. The Crowded Environment of a Reverse Micelle Induces the Formation of beta-Strand Seed Structures for Nucleating Amyloid Fibril Formation. J. Am. Chem. Soc. 2012, 134, 60616063. Humphrey, W.; Dalke, A.; Schulten, K. VMD: Visual molecular dynamics. J. Mol. Graph. Model. 1996, 14, 33-38. ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 24

(23) The PyMOL Molecular Graphics System. Version 1.8. 2016. Schrödinger, LLC. (24) Abel, S.; Waks, M.; Marchi, M. Molecular dynamics simulations of cytochrome c unfolding in AOT reverse micelles: The first steps. Eur. Phys. J. E 2010, 32, 399-409. (25) Marchi, M.; Abel, S. p. Modeling the Self-Aggregation of Small AOT Reverse Micelles from FirstPrinciples. J. Phys. Chem. Lett. 2015, 6, 170-174. (26) Luisi, P. L.; Magid, L. J. Solubilization of Enzymes and Nucleic-Acids in Hydrocarbon Micellar Solutions. Crc Critical Reviews in Biochemistry 1986, 20, 409-474. (27) Levashov, A. V.; Khmelnitsky, Y. L.; Klyachko, N. L.; Chernyak, V. Y.; Martinek, K. Enzymes Entrapped Into Reversed Micelles in Organic-Solvents - Sedimentation Analysis of the Protein-Aerosol Ot-H2OOctane System. J. Colloid Interface Sci. 1982, 88, 444-457. (28) Zampieri, G. G.; Jackle, H.; Luisi, P. L. Determination of the Structural Parameters of Reverse Micelles After Uptake of Proteins. J. Phys. Chem. 1986, 90, 1849-1853. (29) Murakami, H.; Nishi, T.; Toyota, Y. Determination of Structural Parameters of Protein-Containing Reverse Micellar Solution by Near-Infrared Absorption Spectroscopy. J. Phys. Chem. B 2011, 115, 5877-5885. (30) Kitchens, C. L.; Bossev, D. P.; Roberts, C. B. Solvent effects on AOT reverse micelles in liquid and compressed alkanes investigated by Neutron Spin-Echo spectroscopy. J. Phys. Chem. B 2006, 110, 2039220400. (31) Johannsson, R.; Almgren, M.; Alsins, J. Fluorescence and Phosphorescence Study of Aot/H2O/Alkane Systems in the L2 Reversed Micellar Phase. J. Phys. Chem. 1991, 95, 3819-3823.

ACS Paragon Plus Environment

Page 11 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

Figure Legends Figure 1. Stages in the simulation protocols for the four RM systems. Equilibration and conditioning was done on the Bridges system. Production simulation was done on Anton 2. Figure 2. Solvent-accessible surface areas (SASAs) of gaps in the surfactant layer as a percentage of total RM SASA. Error bars represent standard deviations for the distribution of each results. The asterix indicates that the result for the RM of type L was significantly different from each of the other results with P < 0.05 by T-test. Figure 3. −ln(𝑓𝑓𝑐𝑐𝑐𝑐 ) for the four RM systems (see equation 1). The slopes of each graph are approximately equal, and there was no significant difference between the two slopes in the N2/N3 systems. The dramatic increase observed in the NN and NNP systems is due to content-mixing.) Figure 4. Collisions and content mixing events in the four RM systems. Collisions (black circles) and contentmixing events (red circles) indicate when there is non-zero vdW interaction energy between surfactants of two RMs in the system. Figure 5. Stages of RM fusion and fission. Red/blue filled circles – water. Red/blue “+” symbols – sodium ions. Red/blue squares with two chains – AOT headgroups and chains. (a) Chain mixing is defined as occurring when the distance between the inner cores of two RMs is less than the length of two AOT molecules such that the chains of two AOT molecules overlap. Note that some waters are among the AOT chains and not in the RM core. (b) Water molecules in surfactant layer organize to form a water bridge between the two RM cores. (c) AOT molecules rotate so that their headgroups are oriented towards waters in the bridge. (d) The water bridge expands into a pore allowing free mixing of RM contents. Stages (a-d) were observed in both the NN and NNp simulations. (e) In the NNp simulation, the Aβ40 peptide (not shown) diffuses into the water pore and it constricts. (f) Water bridge termination occurs before rotation of AOT headgroups towards one or the other RM core. (g) AOT rotation follows water bridge termination. (h) In the NNp simulation, the RMs separate to the point where chain mixing no longer occurs, but contact between the AOT chains in two different RMs persists. Figure 6. Time course of fusion and fission events in the NNp system. The components of each RM (water, AOT headgroup, AOT chain, and sodium ions) were designated either red or blue prior to each mixing event. The number of red components within 5 Å of each blue component, and the number of blue components within 5 Å of each red component, were counted for each component, at each time point. Time = 0 defined as the end of simple contact and the beginning of chain mixing. The counts for each fusion event were normalized to a maximum of 1.0, and averaged over the 7 fusion events. In (a-d), time = 0 is defined as the time when simple contact ended and chain mixing began. In (e-h) time = 0 is defined as the time when chain mixing ended and only simple contact occurred. Solid lines indicate results for the empty RM (type N), and dotted lines indicate results for the peptide-containing RM (type Np). Figure 7. The number of contacting AOT in each contact incidence in the four RM systems. (i.e., the total number of AOTs having non-zero vdW interaction energy with AOT molecules of the other RM). The number of AOT molecules is represented with black circles, and content mixing events were represented with red circles. Figure 8. The average number of water in the immediate vicinity of contacting AOT molecules. (i.e., the total number of water within 5 Å of contacting AOTs divided by the number of contacting AOTs) Figure 9. Changes in the number of AOT molecules, 𝑾𝑾𝟎𝟎 values, and net charge of RM complexes after seven content-mixing events in the NNp system. (Protein-containing RM is represented with dashed line, and the other RM is represented with solid line) Figure 10. The onset of fission in a fused pair of RMs. This configuration is representative of the relationship between the Aβ40 peptide shortly after it enters and blocks the water bridge between the type N (right half of image) and type Np (left half of image) RMs in the NNp system. Pink: the surface of AOT molecules, with molecules in the foreground deleted. Blue – the surface of water and sodium ions. Yellow – the Aβ40 peptide. Note that residues 21-31 of the pepide have formed a helix, and the water bridge adjacent to the rightmost portion of the peptide is tightly constricted. The labeled residue side chains are clearly visible, implying that they are oriented away from the core and embedded in an AOT layer that is not shown. ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 24

Table 1. Compositions of simulated systems*

System NS NN NL NNp

RM type S N1 N2 N3 N4 L Np N5

𝒏𝒏𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘𝒘 𝒏𝒏𝑨𝑨𝑨𝑨𝑨𝑨 724 63 1448 127 1448 127 1448 127 1448 127 2166 190 1448 127 1448 127

𝒏𝒏𝑰𝑰𝑰𝑰𝑰𝑰

10,070

𝒏𝒏𝒂𝒂𝒂𝒂𝒂𝒂𝒂𝒂𝒂𝒂

280,876

𝒇𝒇𝒊𝒊𝒊𝒊𝒊𝒊 (%) 90

Cell dimensions (Å)

10,070

287,272

87

130 x 165 x 130

7,500

226,764

81

130 x 150 x 130

7,000

208,053

83

130 x 145 x 130

130 x 165 x 130

*𝑓𝑓𝑖𝑖𝑖𝑖𝑖𝑖 is the mass fraction of isoO as a percentage of mass of all components in the system.

ACS Paragon Plus Environment

Page 13 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

Table 2. Intermicellar water exchange rates (𝑘𝑘)*

System

NS NN NL NNp

RM S N1 N2 N3 N4 L Np N5

fraction of leaving water per −5 −1 gap area (× 10 𝑛𝑛𝑠𝑠 ) −5 −2 (× 10 Å ) 9 11 9 3 9 9 9 5 9 5 9 1 9 3 9 3 𝒌𝒌

*Values of 𝑘𝑘 in the NN and NNp systems belong to contact-independent water exchange before contactdependent mechanism.

ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 1.

ACS Paragon Plus Environment

Page 14 of 24

Page 15 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

Figure 2.

ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 3.

ACS Paragon Plus Environment

Page 16 of 24

Page 17 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

Figure 4.

ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 5.

ACS Paragon Plus Environment

Page 18 of 24

Page 19 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

Figure 6.

ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 7.

ACS Paragon Plus Environment

Page 20 of 24

Page 21 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

Figure 8.

ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 9.

ACS Paragon Plus Environment

Page 22 of 24

Page 23 of 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

Figure 10

ACS Paragon Plus Environment

Langmuir 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

For Table of Contents Use Only

ACS Paragon Plus Environment

Page 24 of 24