Mechanism of rhodium-promoted triphenylphosphine reactions in

A. G. Abatjoglou, E. Billig, and D. R. Bryant ... István T. Horváth, Gábor Kiss, Raymond A. Cook, Jeffrey E. Bond, Paul A. Stevens, József Rábai,...
2 downloads 0 Views 508KB Size
Organometallics 1984,3,923-926

923

Mechanism of Rhodium-Promoted Triphenyiphosphine Reactions in Hydroformylation Processes A. 0. Abatjoglou,'

E. Biilig, and D. R. Bryant

Research and Development Department, Union Carbide Corporation, South Charleston, West Virginla 25303 Received October 25. 1983

Triphenylphosphine is converted into propyldiphenylphosphine rapidly during rhodium-catalyzed propylene hydrogenation and more slowly during low-pressure propylene hydroformylation. The pathway for this conversion involves the reversible oxidative addition of a phenyl-phosphorus bond of triphenylphosphine to rhodium, followed by the reductive elimination of propyldiphenylphosphine from a (dipheny1phosphido)propylrhodium intermediate. The effects of reaction variables on this triphenylphosphine reaction have been studied, and a mechanism is proposed.

Introduction Rhodium-phosphine catalysta are widely used in olefin hydroformylation processes for the production of billionpound quantities of oxo aldehydes and alcohols.' Phosphine side reactions occurring during rhodium hydroformylation lead to byproducts that mildly affect catalyst performance and to rhodium clusters that severely affect catalyst performance.2 During rhodium-catalyzed propylene hydroformylation triphenylphosphine (TPP) is slowly converted to propyldiphenylphosphine (PDPP).3 This reaction has been postulated' to proceed via intramolecular C-H oxidative addition of the phenyl groups of coordinated triphenylphosphine (orthometalation). Triphenylphosphine, however, is known to react by direct oxidative addition of its P-C bonds to rhodiums as well as to other transition metals.6 We wish to report on our studies that differentiate between the orthometalation and direct P-C oxidative addition pathways for the triphenylphosphine reactions under hydroformylation conditions and define the role of the metal complex in catalyzing these reactions.

Scheme I 2co

P

RhH(CO)(Ph,P),

c _

-PhxP

v \RhH2(CO)(Ph 3P)

/

c

H2.

3

d

Scheme I1

kH3-q I

- \

-

homogenous Rh cat. 80 psi of H2:CO. 130ec'

Results and Discussion Carbon-Phosphorus vs. Ortho Carbon-Hydrogen Bond Cleavage as the First Step in Rhodium-Catal y d Phosphine Reactions. Gregorio et al. postulated' that the first step in the triphenylphospine reaction during

CH3*CHO

homogenous Rh cat.

80 psi of Hz:CO, 130nC

\

h i 3

CH3

/3 homopanous Rh cot

hydroformylation is the oxidative addition of an ortho carbon-hydrogen bond of a coordinated triphenylphosphine to the rhodium, leading eventually to the cleavage of the phenyl-phosphorus bond (Scheme I). To test this hypothesis we used tris(o-dideuteriopheny1)phosphine,' (C6H3D2)3P,as the ligand in a continuous rhodium-catalyzed propylene hydroformylation experiment. After 4 days of continuous operation (reaction conditions: 120 OC; lo00 ppm of Rh, 5 w t % phosphine; 60 psia of CO; 60 psia of H: 35 psia of C3H6)about 30% of the starting triphenyl-d6-phosphine was converted to

BO psi of H2:CO. 130-C

\

CH3

CH3/3

Table I. Rhodium-Catalyzed H-D Exchange in Triphenylphosphine and Its Reaction Product Propyldiphenylphosphine during Propylene Hydroformylationa % deuterium content ~~

(1) C o d , B. In "New Syntheses with Carbon Monoxide";Falbe, J., Ed.;Springer-Verlag: Berlin, 1980. (2) Bryant, D. R.; Billig, E. U.S. Patent 4277627,1981. (3) Bryant, D. R.; Galley, R. A. U.S.Patent 4283304,1981.

(4) Gregorio,G.; Montrhi, G.; Tampieri, M.;Cavalieri d'Oro, P.; Pagani, G.; Andreetta, A. Chim. Znd. (Milan) 1980,62,389. (5) (a) Kaneda, K.; b o , K.; Teranishi, S. Chem. Lett. 1979,821. (b) Lewin, M.;Aizenshtat, Z.; Blum, J. J. Organomet. Chem. 1980,184,255. (6) Cotton, F. A.; Wilkinson, G. "Advanced Inorganic Chemistry",4th ed. Wiley: New York, 1980, p 1247. (7) PmhaU, P. W.; Knoth, W. H.; Schum, R. A. J. Am. Chem. SOC. 1969, 91,4990.

starting TPP-d, TPP after reaction PDPP product

80 77

19

1

22

1 82

18

Continuous hydroformylation reaction conditions: 1000 ppm of Rh as Rh(acac)(CO),;5 wt % (C,H,D,),P, in n-valeraldehyde trimer; 50 psia of H,; 50 psia of CO; 35 psia of C3H,.

PDPP. Mass spectral analysis revealed that very little H-D exchange had occurred either in the starting TPP or in its reaction product PDPP (Table I).

Q216-7333/S4/2303-0923$Q1.5Q/Q0 1984 American Chemical Society

Abatjoglou, Billig, and Bryant Table 11. Rhodium-Catalyzed H-D Exchange in Triphenylphosphineunder Different Reaction Conditions" % deuterium content in TPP reactant gas pressure, psia after reactn

cI 1.4

7c t8

,.3

1.2

=m

U

n z

0

N

1.0

fc, L A

00

0.8

-

t

/

2 ;

0

;L IE:

entry

C,H, 40 0 0

do

d,

13.2 99.0

23.0 1.0

d2

d3

3.4

0.4

(1

HVDROFORMVL

0.4

o w

2 I 0.2

O +

*z

7

0.0

0

2

4

e

(I

10

12

14

le

10

20

TIME, D A Y S

Figure 1. Propyldiphenylphosphine accumulation w. time under propylene hydroformylation (curves a) and hydrogenation (curves b). Conditions: 105 O C ; 150 ppm of Rh as RhH(CO)(Ph3P)3: 9 w t 3' % (C&,)& 30 psia of C3H6,100 psi of H2,and nil or 10 psi of

0 0

100 40 40 Reaction condition: 1000 ppm of Rh as Rh(acac)(CO),; 5 wt % Ph3P in toluene as solvent. The catalyst is heated at 130 "C in a pressure reactor for 3 h under the Determined by chemical gas pressures shown above. ionization mass spectroscopy.

C O STARVED HVDROFORMVLATION CONDITIONS

0.8

D, 40 120

GO

1 2 3

c

f'

~

0.24

co.

This result is in agreement with previous studies8 which indicate that orthometalation deuterium exchange reactions of rhodium triphenylphosphine complexes are sluggish. The relatively small H-D exchange relative to the conversion of TPP to PDPP suggests a direct phosphorus-phenyl bond cleavage as the likely pathway of triphenylphosphine reaction. To test this hypothesis we studied the rhodium-catalyzed reaction of different substituted triarylphosphines under an atmosphere of hydrogen and carbon monoxide. It is k n o w 4 that TPP reacts upon heating in the presence of rhodium, H2, and CO to,among other products, benzene and benzaldehyde. Using rhodium-containing solutions of tri-o-, trim-, and tri-p-tolylphosphines and individually treating them with C0H2, we found that only one isomeric tolualdehdye is formed from each phosphine (Scheme 11). The tolualdehydes produced are those resulting from intermediates formed by direct carbonphosphorus bond cleavage and are not those expected to form by the earlier proposed orthometalation mechanism. Accelerated PropyldiphenylphosphineFormation under RhTPP-Catalyzed Propylene Hydrogenation. We found that the conversion of triphenylphosphine to propyldiphenylphosphine, which is very slow during the low-pressure rhodium hydroformylation of propylene, is greatly accelerated under propylene hydrogenation conditions (eq 1).

Benzene is the other major TPP decomposition product, and it is initially formed in equimolar ratio with the PDPP. As the concentation of PDPP increases, however, it is in turn slowly converted into dipropylphenylphosphine and benzene, and the mole ratio of benzene to PDPP becomes greater than 1. Trace amounts of biphenyl have been detected by GC-MS analysis of the reaction mixture. The difference in the rates of TPP reaction under propylene hydroformylation and propylene hydrogenation conditions is shown in Figure 1. Interestingly under hydrogenation conditions there is an induction period and (8) (a) Ito, T.; Kitazume, S.; Yamamoto,A,; Ikeda, A. J. Am. Chem. SOC.1970,92(10), 3011. (b) Osbome, J. A.; Jardine, F. H.;Young, J. F.; Wilkinson, G. J. Chem. Soc. A 1964,1711. (c) Jardine, F. M.; Osborne, J. A.; Wilkinson, G. Zbid. 1967, 1574.

-

't II

FINAL C A T A L Y S T COLOR

-

DARK BROWN

I

Y

0.00

0

5

D A R K ORANGE

10

16

20

STARTINO TTP CONCENTRATION IN THE REACTION SOLUTION (WT %)

Figure 2. Propyldiphenylphosphine concentration in catalysts containing lo00 ppm of rhodium as RhH(CO)(Ph,P), and va+ng concentrations of triphenylphosphine after exposure to 50 psi of H2 and 50 psi of C3H6at 130 O C for 1 h.

a catalyst color change (yellow to orange) during which the rate of production of PDPP increases. When the hydrogenation conditions are changed to hydroformylation by the addition of carbon monoxide, the color of the catalyst returns to yellow and the rate of PDPP production drops. The facile conversion of TPP to PDPP under propylene hydrogenation conditions has enabled us to study the scope and mechanism of this reaction in short duration laboratory experiments. The conclusions reached from the study of this reaction may be applicable for the TPP reactions under hydroformylation conditions. The two reactions cannot however be identical, since we surprisingly found that whereas the H-D exchange reaction of coordinated triphenylphosphine under hydroformylation conditions is sluggish (see above), the H-D exchange under propylene hydrogenation conditions proceeds to a significant extent under otherwise comparable reaction conditions (Table 11). Effect of Reaction Conditions on the Rates of

TriphenylphosphineConversion to Propyldiphenylphosphine during Rhodium-Catalyzed Propylene Hydrogenation. Effect of TriphenylphosphineConcentration. We found that increasing triphenylphosphine concentration inhibits the reaction of triphenylphosphine to form PDPP during the rhodium-catalyzed propylene hydrogenation (Figure 2). This suggests that rhodiumphosphine equilibria play a role in the reaction of TPP to give PDPP. High phosphine concentrations maintain the rhodium in a more coordinatively saturated form, which may be less reactive to oxidative P-C bond addition.

Organometallics, Vol. 3, No. 6,1984 925

Rhodium-Promoted Triphenylphosphine Reactions 0.7

0.6

-

0.5

-

0.4

-

0.3

-

-

C A T A L Y S T COLOR BROWN 0.0

0.2

0.4

0.8

1.0

1.2

1.4

YELLOW

1

0

TIME, HOURS

Figure 3. Propyldiphenylphoepheaccumulation vs. time under propylene hydrogenation using different rhodium compounds as catalysts (conditions: 130 O C , 5 wt % (c6H6)p;lo00 ppm of Rh, 50 psi of Hz, 50 psi of C3H6): 0, RhH(CO)(PPh3)3;A, Rho, RhCl(CO)(Ph,P), (acac)(CO)z;0,Rh3(pPPhz)3(Ph3P)z(C0)3; and RhCl(Ph3P)p

Effect of Propylene and Hydrogen Concentration. Although higher TPP concentration reduces the rate of PDPP formation, higher propylene concentrations promote PDPP formation (Figure 4). It is also noteworthy that a t higher propylene concentrations darkening of the catalyst color, which has been associated with the formation of phosphido-bridged rhodium clusters: is diminished. Diminished color formation suggests that a t higher pro(9) Billig,E.; Jamerson, J. D.; Pruett, R. L. J. Organomet. Chem. 1980, 192, C49.

75

100

125

PROPYLENE PARTIAL PRESSURE (PSIA)

Figure 4. Propyldiphenylphosphine concentrations in catalysts containing 1000 ppm of Rh as RhH(CO)(Ph,P), and, 5 wt % triphenylphosphine and exposed to 50 psi of Hz and varying pressures of C3H6for 1 h.

Scheme I11

Effect of the Rhodium Complex Type. The rate of conversion of triphenylphosphine, with propylene and hydrogen, to propyldiphenylphosphine varies with the rhodium complex used (Figure 3). The monomeric rhodium complexes RhH(CO)(Ph,P), and Rh(aca~)(CO)~ are more active than the trinuclear phosphido-bridged cluster9 Rh3(p-Ph2P)3(Ph3P)2(C0)3, which could presumably convert its phosphido bridges to PDPP and act as a template for cluster ~ a t a l y s i s . ~ It is noteworthy that with RhH(CO)(Ph,P), as the catalyst, within 3-4-h reaction time the catalyst color changes from yellow to dark brown and the catalytic activity for both propylene hydrogenation and propylidiphenylphosphine formation diminishes. We believe that this lower catalyst activity is due to the formation of phosphido-bridged rhodium clusters, which by being more coordinatively and structurally stable than their mononuclear counterparts, are also less reactive toward the P-C bond cleavage reaction. RhC1(Ph3P), is a significantly better propylene hydrogenation catalyst than RhCl(CO)(Ph& Neither of these chloride-containing square-planar complexes promotes the reaction of triphenylphosphine to propyldiphenylphosphine, under either hydrogenation or hydroformylation conditions. Thus hydrogenation ability in a catalyst is not sufficient to promote the carbon-phosphorus bond cleavage reaction; apparently the electronic and/or steric effects of the chloride substituent alter the activity of the rhodium catalyst. Alternatively, it is likely that the rhodium(II1) dihydride H,RhCl(PPh,),(S), formed from RhC1(PPh3)3and thought to be an active form of the olefin hydrogenation catalyst, is not effective in promoting the TPP to PDPP transformation.

50

25

(1)

PhH

T /5 LnThH Yellow pPh3 solution

Dh r I,

I

L.Rh-H I H

Hz

A -

‘ \ p h

(111)

I LnRh-H I PPhz

41

hl

Ph I LnRh-C3H, I PPhz

Ph

I

L.Rh

C -

f

PheC3H7P

Ph I

LnRh-H I

PPh2 B

“Rh” , 7

Phosphido Bridged D rhodium complex(es) Dark solution

L, = other ligands such as PhaP, c3H13, CO, H

pylene concentrations, phosphido-bridged rhodium clusters either are not formed or are effectively broken down to mononuclear rhodium (yellow) complexes. Hydrogen between 25 and 100 psi has no effect on the rate of formation of PDPP. However, in the absence of hydrogen virtually no reaction of triphenylphosphine is observed, and the catalyst solution remains yellow. Appatently only a low level of hydrogen is required to trigger the reaction of TPP to PDPP and possibly the rhodium clustering process as well. Suggested Mechanism of TriphenylphosphineRe-

actions in the Presence of Rhodium, Propylene, and Hydrogen. The experimental results detailed above can be rationalized on the basis of the reaction mechanism shown in Scheme III. It is proposed that a coordinatively

Abatjoglou, Billig, and Bryant

926 Organometallics, Vol. 3,No. 6,1984

unsaturated rhodium(1) complex, A, oxidatively adda a carbon-phosphorus bond of coordinated triphenylphosphine to form a rhodium(II1) intermediate B. Higher propylene concentrations favor reaction of this intermediate to C and ultimately to propyldiphenylphosphine whereas lower propylene concentrations favor the formation of phosphido-bridged rhodium complex(es) D. The phosphine concentration determines the concentration of the coordinatively unsaturated rhodium complex A, which initiates the phosphine breakdown sequence. Chelating phosphines that enhance the degree of phosphine substitution and consequently the degree of coordinative saturation in rhodium complexes have been used as stabilizers with (tripheny1phosphine)rhodium catalysts in the low-pressure hydroformylation.1° The reversibility of the reaction steps in the mechanism in Scheme I11 is supported by the observation that rhodium catalyzes aryl group scrambling between triarylphosphines (eq 2). This reaction must occur through a

and 23.7 g of peroxide-free tetraglpe was charged to the autoclave and heated under 5 psi of nitrogen pressure to the desired temperature, and then hydrogen and propylene (100 psi of a 1:1 mixture) were added. Propylene was slowly hydrogenated to propane. The reaction pressure was maintained by feeding 1:l hydrogen and pr~pylene.'~ Liquid samples were withdrawn periodically by using a Pressure Lok (Precision Sampling Corp., Baton Rouge, LA) gas tight syringe and analyzed by gas chromatography using the following chromatographic conditions: in. packed with 20 wt % OV-101on ChroColumn, 6 ft X mosorb W; injector temperature, 270 "C; column temperature, 235 "C; helium flow rate, 40 mL/min. Rhodium-Catalyzed Triphenylphosphine Reaction to Propyldiphenylphosphine during Propylene Hydroformylation. Because of the low rate of TPP decomposition to PDPP during propylene hydroformylation,the rate data in Figure

1 were obtained by using a continuous hydroformylation reactor. The continuous reador consisted of a 3-02%her-Porter preasure bottle (Fischer & Porter Co., Warminster, PA) submersed in a thermostated oil bath. A 20-mL aliquot of a catalyst containing 0.0631 g (0.136"01) of Rh(CO)(acac)(PhR),8.1 g (30.92"01) of Ph3P, and 81.9 g of n-valeraldehyde trimer (ester diol monoRh (C6H5)3P + (CH3CBH4)3P valerate) as the high boiling solvent was introduced into the reactor with a syringe through a septum and valve aasembly. The reactant ( C ~ H ~ ) ~ ( C H ~ C+ B (HC~B) P H ~ ) ( C H ~ C ~(2) H ~ ) ~ Pgases (CO, Hz, C3Hs) and nitrogen were sparged through the series of oxidative additions/reductive eliminations of solution by using a f i e porosity metallic sparger. The flow rate of gases (adjusted individually with Brooks mass flow meters, carbon-phosphorus bonds to rhodium. A more detailed Brooks Instrument Div. Hatfield, PA) was such that the rate of account of this novel reaction is given in the accompanying aldehyde stripping is equal to the rate of aldehyde production. communication.'l Small liquid samples were withdrawn from the reactor and anDiphenylphosphine is a possible intermediate during alyzed by GC for PDPP concentration. Turning off the carbon triphenylphosphine reaction. We studied ita activity and monoxide feed changed the reaction from propylene hydrofate under rhodium triphenylphosphine catalyzed proformylation to propylene hydrogenation. pylene hydrogenation conditions. Surprisingly, diTri-p-tolylphosphineDecomposition to p -Tolualdehyde. phenylphosphine reacts rapidly and forms predominantly A solution containing 0.0627 g (0.243mmol) of Rh(acac)(CO)z, triphenylphosphine along with lower molecular weight 1.25 g (4.107"01) of (p-CH3C&,)3P, and 23.7 g of benzene was charged in the autoclave described above, purged with nitrogen, phosphorus containing byproducts. Propyldiphenylpressured with 60 psig of Hz:CO, and heated to 130 "C. After phosphine is a minor product. This observation and the temperature equilibration the Hz:CO pressure was raised to 120 fact that no low molecular weight phosphorus products are psig, and the mixture was allowed to react for 16 h. The detection observed in the triphenylphosphine reactions support the and identification of the product aldehyde were made by GC-IR proposed mechanism in Scheme I11 and suggest that the spectroscopy using the following chromatographic conditions. alternative pathway for PDPP formation involving free or in. packed with 9 w t % Carbowax 20M TPA Column, 10 ft X coordinated diphenylphosphine is less likely. on 40/60mesh Chromosorb W;I4injector temperature, 240 OC; column temperature, 120 "C for 18 min and then heated to 200 Experimental Section OC at 10 "C/min; Blight pipe temperature, 220 "C; helium flow All phosphines were purchased and used without purification. rate, 30 mL/min. One aldehyde peak was seen in the GC scan, Gas chromatographic analyses were made by using a Varian 3700 which shows an IR spectrum identical with that of the reference series gas chromatograph equipped with a phosphorus selective gas-phase spectrum of p-tolualdehyde (Sadler Research LabcFlame Photometric Detector (FPD) and a CDS-111electronic ratories, Inc., Philadelphia, PA) In identical experiments using integrator. The concentrations of TPP and PDPP were detertri-o-tolylphosphineor tri-m-tolylphosphine,o-tolualdehyde and mined by using the phosphine oxide @-FC6H4)3P0as an intemal m-tolualdehyde are formed exclusively from the respective standard. Positive identification of phosphine reaction products phosphines. was by gas chromatography-Fourier transform infrared (GC-IR) Registry No. TPP, 603-35-0;PDPP, 7650-84-2;Rh(acac)(CO)z, spectroscopy using a Digilab FTS-15spectrometer equipped with 1487482-9;Rh(CO)(acac)(Ph$), 25470-96-6;RhH(CO)(PPh3)3, a liquid-nitrogen-cooleddetector at 8 cm-' resolution and by gas 17185-29-4; Rh3(p-PPhz),(PhsP)Z(CO)3,75047-27-7; RhCl(C0)chromatography-mass spectroscopy (GC-MS) using an AEI RhCl(PhSP)S, 14694-95-2;C3H6, 115-07-1; (PhSP)z, 13938-94-8; Model MS-50 mass spectrometer. @-CH&sH4)3P, 1038-95-5;( ~ - C H S C ~ H J 6224-63-1; ~P, (ORhodium-Catalyzed Triphenylphosphine Reaction to CH~CBHJSP, 6163-58-2. Propyldiphenylphosphine during Propylene Hydrogenation. The TPP reaction studies were done in a 100-mLstainless-steel autoclave equipped with magnetic stirring. The autoclave was (12) Rh(acac)(CO)pis a convenient rhodium catalyst precursor. In the heated by a 200-W band heater equipped with a proportional presence of excess triphenylphosphine and hydrogen, it is readily contemperature controller. Internal temperature was monitored with verted to RhHECO)(Ph8P)8and acetylacetone. a platinum resistance thermometer of AO.1 "C accuracy. The (13) The accumulation of propane can reduce the partial pressures of autoclave was connected to a gas manifold for pressurization with propylene and hydrogen and cause a slowdown of the reaction. If high reactant gases. conversions of TPP to PDPP are desired, the accumulated propane In a typical experiment a solution containing 1.25 g (4.77"01) should be vented periodically. (14) Under these chromatographic conditions, the m- and p-toluof Rh(acac)(C0)2,'2 of triphenylphosphine, 0.0627 g (0.243"01) aldehydes coelute. The characterization of the produced isomera is based on their gas-phase IR spectra With a 50-m glasa capillary Carbowax 2OM column, the tolualdehyde isomers were separatad and the conclusions (10) Mataumoto, M.;Tamura, M. U.S. Patent 4215077, 1980. reached on the basis of the IR spectra were fully supported by their GC (11) Abatjoglou, A. C.; Bryant, D. R. Organometallics, second paper

E

of two in this issue.

retention times.