Meta-Lens Doublet in the Visible Region - Nano Letters (ACS

Jun 29, 2017 - Harvard John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138, United States ...
0 downloads 10 Views 4MB Size
Subscriber access provided by Olson Library | Northern Michigan University

Communication

Meta-lens doublet in the visible Benedikt Groever, Wei Ting Chen, and Federico Capasso Nano Lett., Just Accepted Manuscript • DOI: 10.1021/acs.nanolett.7b01888 • Publication Date (Web): 29 Jun 2017 Downloaded from http://pubs.acs.org on July 2, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Nano Letters is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

Meta-lens doublet in the visible Benedikt Groever1, Wei Ting Chen1, and Federico Capasso1,* 1

Harvard John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138, USA *[email protected]

Recently, developments in meta-surfaces have allowed for the possibility of a fundamental shift in lens manufacturing - from the century-old grinding technology to nanofabrication – opening a way toward mass producible high-end meta-lenses. Inspired by early camera lenses and to overcome the aberrations of planar singlelayered meta-lenses, we demonstrate a compact meta-lens doublet by patterning two metasurfaces on both sides of a substrate. This meta-lens doublet has a numerical aperture of 0.44, a focal length of 342.5 µm, and a field of view of 50° that enables diffraction-limited monochromatic imaging along the focal plane at a wavelength of 532 nm. The compact design has various imaging applications in microscopy, machine vision and computer vision.

Keywords: Metasurface, visible wavelength, meta-lens doublet, aberration correction, diffraction-limited

1

ACS Paragon Plus Environment

Nano Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Even though ancient Greek had primitive singlet lenses, it was not until the 16th century in Holland, that for the first time two different lenses were combined to image an object.1 A singlet planar lens cannot achieve diffraction-limited focusing for different angles of incidence.2 This can be solved by adding lenses, and therefore provide more degrees of freedom to correct for spherical aberration, coma aberration, astigmatism, and Petzval field curvature.3,

4

However, this solution, combined with conventional lens manufacturing

techniques, results in bulky imaging systems. In recent years, metasurfaces have emerged as a new way of controlling light through the optical properties of sub-wavelength structures patterned on a flat surface.5-7 The subwavelength structures are designed to locally change the amplitude, polarization and phase of an incident beam so that various optical devices can be realized in a compact configuration.8-20 This becomes important as the demand for portable and wearable devices increases. Here, metasurfaces enable flat optics with new opportunities – especially for compact camera modules.21-26 Recently, a near diffraction-limited meta-lens doublet in the near-infrared has been demonstrated.27 To achieve better spatial resolution and for more possible applications, we present, in the visible, a meta-lens doublet showing diffractionlimited focusing along the focal plane for an incidence angle up to 25°. The design builds up on our previous works and corrects for the first time Petzval field curvature, coma aberration and other monochromatic aberrations in the visible.28, 29 The meta-lens doublet presented in this paper is based on the principle of the Chevalier Landscape lens.30 It was the first widely used camera lens introduced after the invention of the photographic process based on film. Both, the Chevalier Landscape lens and our metalens doublet, have in common a smaller aperture in front of a focusing lens.31 In the 2

ACS Paragon Plus Environment

Page 2 of 23

Page 3 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

Landscape lens, the rays in normal and oblique incidence are separated by the small aperture and then focused by different parts of the lens so that one can tailor its curvature to reduce aberrations, especially coma aberrations. In our case, the role of the aperture is replaced by an aperture with a metasurface (refer to aperture meta-lens hereafter). Figure 1(a) shows a schematic of our meta-lens doublet. An incident beam passes through the aperture meta-lens and substrate before being focused by the focusing metalens. The meta-lenses are comprised of titanium dioxide (TiO2) nano-fins with the same length (L), width (W), and height (H) but different rotations arranged on a hexagonal lattice (Fig. 1(b)). 20 Figure 1(c-d) shows the dimensions of each nano-fin. A phase profile

,

is imparted through the rotations of nano-fins based on the principles of Berry phase.32, 33 Each nanofin is designed as a half-wave phase shifter converting the incident circularly polarized light into its orthogonal polarization state. The relations between rotation angles

,

follows:

,

=2

,

,

and

, for the case of left-handed circularly

polarized (LCP) light (Fig. 1(e)). The phase of the aperture meta-lens was chosen as follows:

,

=

1

and similarly, for the focusing meta-lens: , Here,

=−

2

+

+ ! − !" +

#

is the design wavelength (= 532 nm), f is the focal length (=342.3 µm), +

2 =

is the radial coordinate, x and y are position coordinates of each nano-fin with

respect to an origin at the center of each lens, RAL and RFL are the radii of the aperture and 3

ACS Paragon Plus Environment

Nano Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

focusing meta-lens, respectively. In Eq. 2 we added a polynomial onto the hyperbolic phase profile to correct aberrations. The coefficients an and bn are optimization parameter. The ray tracing optimization is based on gradient descent with the largest focal spot along the focal plane as objective function. For first optimization step, the initial conditions for an and bn were chosen as an = 0, bn = 0, for all n. After multiple cycles, the optimization parameters an & bn were obtained such that all rays for various incidence angles up to 25° falls within diffraction-limited Airy disks (see Sup. Tab. S1&S2 for the coefficients).34 Both aperture meta-lens and focusing meta-lens were fabricated by electron beam lithography followed by atomic layer deposition.35 They were aligned through alignment marks patterned on both sides of a substrate (see Methods for details). Figure 1(f) and 1(g) show electron microscope images for the focusing meta-lens, respectively. The phase profile of Eq. 1 and Eq. 2 were imparted assuming incident LCP and RCP light for the aperture and focusing meta-lens, respectively. The first term of Eq. 2 shows a hyperbolic shape, and we refer to a meta-lens with this phase profile as hyperbolic meta-lens hereinafter. Figure 1(h-i) show the phase plots based on Eq. 1 and Eq. 2 for the aperture meta-lens and focusing meta-lens, respectively. We found that the aperture meta-lens has a phase profile similar to a Schmidt plate, which is widely used to correct spherical aberration.36, 37 This phase profile results in converging chief rays and diverging marginal rays. The phase profile of the focusing meta-lens has a stronger phase gradient at the edge than that of the hyperbolic meta-lens (dashed gray line in Fig. 1(i), plotted with the first term of Eq. 2 only). Figure 2(a) shows the ray diagram for the hyperbolic meta-lens, which is only capable of achieving diffraction-limited focusing at normal incidence. The inset shows a magnified

4

ACS Paragon Plus Environment

Page 4 of 23

Page 5 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

plot of the rays near the focal plane. At oblique incidences, it suffers strong aberrations; we found that this cannot be corrected by adding another metasurface as a correcting lens without modifying its hyperbolic phase profile, because the ray diagrams for different angles of incidence are significantly different. Figure 2(b) shows the case for the focusing meta-lens without the aperture meta-lens. The focusing meta-lens has the same design parameter as the meta-lens doublet. Through the stronger phase gradient at the edge (see light blue curve in Fig. 1(i)) compared to than that of the hyperbolic meta-lens, the marginal rays get bent more towards the optical axis (focusing before the focal plane); while chief rays get bent less (focusing behind the focal plane). These effects are known as positive and negative spherical aberration, respectively. The phase profile of the focusing meta-lens results in similar ray diagrams (Fig. 2(b)) for different incidence angles, and therefore provides a possibility to correct the aberrations. In Fig. 2(c), with the aperture meta-lens, the positive and negative spherical aberrations are corrected to realize diffraction-limited focusing along the focal plane. Figure 2(d) shows an analog ray diagram with refractory lenses. Spherical aberrations are corrected by the Schmidt plate in such a way that marginal rays are diverged, which increases the “effective focal length” while chief rays are converged, which decreases the “effective focal length”. Figure 3(a) shows a schematic setup for measuring the size of the focal spot for different angles of incidence. An objective of NA = 0.95 with a tube lens (f = 180 mm) is used to magnify the focal spot by 100 times on a camera with a pixel size of 2.2 µm. The sample, objective, tube lens and camera are mounted on a rail to adjust the angle of incidence. The light source is a = 532 nm laser with a bandwidth of 30 GHz (28 pm), which means that chromatic aberrations can be neglected. For the measurement, we illuminated the full

5

ACS Paragon Plus Environment

Nano Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 23

diameter of the aperture meta-lens. Figure 3(b-f) show the focal spots for an incidence angle up to 25º. Slightly deformed focal spots result from the misalignment of aperture and focusing meta-lens. Through the comparison of measured and simulated focal spots (Sup. Fig. S1) we estimate that the misalignment between the meta-lenses is about a few micrometers. The misalignment need to be controlled below 10 µm to ensure diffractionlimited focusing. Figure 3(g) shows the full-widths at half maximum (FWHMs) ~

%&

∙(

for

all incidence angles up to 25°. Their Strehl ratios are approximately equal to or larger than 0.8 (Sup. Fig. S2), which meets the requirement of diffraction-limited focusing.38 Slight deviations arise from small misalignments between the two meta-lenses and finite camera pixel size. Figure 3(h) shows the diffraction-limited modulation transfer function MTF for different incidence angles. We obtained the MTF by taking the modulus of the discrete Fourier transformation of the intensity distribution at the intersection between the focal plane and the plane of incidence ( ) direction in Fig. 3(a)). In general, the MTF value drops for large spatial frequencies with a cut-off frequency of

(

%&

. The resolution limit of an

imaging system is defined by the inverse of the spatial frequency at which the MTF has a value of 0.1. Lowering the NA and cascading more metasurfaces with properly placed entrance and exit aperture can further increase the field of view.39 Simulated focal spots with incidence angles beyond 25º are provided in Fig. S3 for reference. Subsequently, we used this meta-lens for widefield imaging. Figure 4 shows the schematic setup for imaging the 1951 US Air Force resolution target. The target is placed at the focal plane and then imaged through the meta-lens doublet (Fig. 4(a)). To reduce laser speckle, a supercontinuum laser (SuperK, NKT Inc.) with 5 nm bandwidth is used. The resolution target consists of stripe groups: each group contains three vertical and 6

ACS Paragon Plus Environment

Page 7 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

horizontal bars with an equal line width and gap. Here we image the group with a line width of ~2.2 µm. From Fig. 4(b) to 4(h), we move our meta-lens doublet in steps of 25.4 µm away from the optical axis to characterize image quality; this corresponds to different fields of view of the meta-lens doublet. The largest movement ~152 µm (Fig. 4(h)) corresponds to a diffraction angle equal to ~25°; the horizontal bars become blurred because chromatic aberration becomes more significant at larger angles (Sup. Fig. S4 – S5). Figure 5 (a-j) show the images when we place the target at the center of the meta-lens doublet in normal incidence. Figure 5(a-f) show the images taken using a tunable laser as light source with a center wavelength at 532 nm of various bandwidths from 5 nm to 100 nm, while Fig. 5(g-j) show that of difference center wavelengths with a constant 5 nm bandwidth. In Fig. 5(f), although the feature can still be resolved, the contrast drops significantly when the laser bandwidth increase is increased to 100 nm. This represents a drop in the MTF value as shown in Fig. 5(k), which results from chromatic aberration: focal length changes with wavelength (Fig. 5(l)). The chromatic aberration can be reduced by several approaches: refractive/diffractive compound lens,40 dispersion engineering of nanostructure resonances41, 42 or designing a nanostructure that can provide more than 2π phase modulation.43-45 Even though the meta-lens doublet is designed at 532 nm, it is still capable of resolving the target clearly at other wavelengths with 5 nm bandwidth. Figure 5(m) shows the MTF curve as a quantitative analysis of Fig. 5(g) to 5(j). Also notable, the meta-lens doublet has low temperature dependence from 25ºC to 70ºC. Its focal spot remains diffraction-limited (Sup. Fig. S6). The maximum focusing efficiency of the metalens doublet is about 50% (Sup. Fig. S7).

7

ACS Paragon Plus Environment

Nano Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

In conclusion, we have demonstrated a meta-lens doublet consisting of nano-fins at wavelength

= 532 nm, with a numerical aperture of 0.44, a focal length of 342.3 µm

and 50° field of view. The meta-lens doublet is capable not only of performing diffractionlimited focusing, but also of realizing high quality imaging along the focal plane. Unlike in traditional Fresnel lenses, the use of nano-structures can provide another degree of freedom to engineer the chromatic aberration. In addition, meta-lens doublets can be mass produced by deep ultraviolet lithography or nano-imprinting. The meta-lens doublet can find many applications in laser-based microscopy and spectroscopy as well as in computer vision and machine vision. Methods The details of the fabrication can be found in Sup. Note 1. The measurement setup includes a super continuum laser (NKT SuperK) equipped with an tunable filter (NKT Varia) with a fiber output. A narrowband green laser (Laser Quantum, Ventus532) with a bandwidth of 30 GHz ~ 28 pm was selectively used. The incident beam was collimated by a fiber collimator (RC12APC-P01, Thorlabs) and then circularly polarized through a wire grid polarizer (Thorlabs WP25L-UB) followed by a quarter wave plate (Thorlabs AQWP05M-600). The focal size is magnified by an objective (Olympus, MPLAPON, 100x, NA = 0.95) paired with a tube lens (Thorlabs, AC508-180-A-ML), then imaged on a monochromatic camera (Edmund Optics, EO-5012). Images of the resolution target were taken with another camera (Thorlabs, DCC1545M). Supporting Information Available: Figure S1-S7 and Sup. Note 1: Fabrication of the metalens doublet. 8

ACS Paragon Plus Environment

Page 8 of 23

Page 9 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

This material is available free of charge via the Internet at http://pubs.acs.org. AUTHOR INFORMATION Corresponding Authors *E-mail: [email protected]. The authors declare no competing financial interest. Acknowledgements This work was supported by the Air Force Office of Scientific Research (MURI, grant# FA9550-14-1-0389 and grant# FA9550-16-1-0156). This work was performed in part at the Center for Nanoscale Systems (CNS), a member of the National Nanotechnology Coordinated Infrastructure (NNCI), which is supported by the National Science Foundation under NSF award no. 1541959. CNS is part of Harvard University. Federico Capasso gratefully acknowledges a gift from Huawei Inc. under its HIRP FLAGSHIP program. The authors acknowledge Dr. Mohammadreza Khorasaninejad for his support in FDTD simulation and Mr. Ameha Gebreyohannes for his support in fabrication.

9

ACS Paragon Plus Environment

Nano Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

References 1. King, H. C., The history of the telescope. Courier Corporation: 1955. 2. Aieta, F.; Genevet, P.; Kats, M. A.; Yu, N.; Blanchard, R.; Gaburro, Z.; Capasso, F. Nano Lett. 2012, 12, (9), 4932-4936. 3. Herbert Gross, H. Z., Martin Peschka, Fritz Blechinger, Handbook of Optical Systems: Vol. 3. Aberration Theory and Correction of Optical Systems. 2007. 4. Strojnik, M.; Paez, G.; Malacara, D.; Thompson, B., Handbook of Optical Engineering. Marcel Dekker New York: 2001. 5. Yu, N.; Genevet, P.; Kats, M. A.; Aieta, F.; Tetienne, J.-P.; Capasso, F.; Gaburro, Z. Science 2011, 334, (6054), 333-337. 6. Yu, N.; Capasso, F. Nat. Mater. 2014, 13, (2), 139-150. 7. Kildishev, A. V.; Boltasseva, A.; Shalaev, V. M. Science 2013, 339, (6125), 1232009. 8. Chen, W. T.; Török, P.; Foreman, M.; Liao, C. Y.; Tsai, W.-Y.; Wu, P. R.; Tsai, D. P. Nanotechnology 2016, 27, (22), 224002. 9. Chen, W. T.; Yang, K. Y.; Wang, C. M.; Huang, Y. W.; Sun, G.; Chiang, I. D.; Liao, C. Y.; Hsu, W. L.; Lin, H. T.; Sun, S.; Zhou, L.; Liu, A. Q.; Tsai, D. P. Nano Letters 2014, 14, (1), 225-230. 10. Groever, B.; Heshmat, B.; Raskar, R. ACS Photonics 2016, 3, (6), 930–935. 11. Sun, S.; Yang, K.-Y.; Wang, C.-M.; Juan, T.-K.; Chen, W. T.; Liao, C. Y.; He, Q.; Xiao, S.; Kung, W.-T.; Guo, G.-Y.; Zhou, L.; Tsai, D. P. Nano Lett. 2012, 12, (12), 6223-6229. 12. Hao, J.; Yuan, Y.; Ran, L.; Jiang, T.; Kong, J. A.; Chan, C.; Zhou, L. Phys. Rev. Lett. 2007, 99, (6), 063908. 13. Huang, L.; Chen, X.; Mühlenbernd, H.; Li, G.; Bai, B.; Tan, Q.; Jin, G.; Zentgraf, T.; Zhang, S. Nano Lett. 2012, 12, (11), 5750-5755. 14. Kawata, S.; Sun, H.-B.; Tanaka, T.; Takada, K. Nature 2001, 412, (6848), 697-698. 15. Liu, X.; Galfsky, T.; Sun, Z.; Xia, F.; Lin, E.-c.; Lee, Y.-H.; Kéna-Cohen, S.; Menon, V. M. Nat. Photonics 2015, 9, (1), 30-34. 16. Luk'yanchuk, B.; Zheludev, N. I.; Maier, S. A.; Halas, N. J.; Nordlander, P.; Giessen, H.; Chong, C. T. Nat. Mater. 2010, 9, (9), 707-715. 17. Valentine, J.; Zhang, S.; Zentgraf, T.; Ulin-Avila, E.; Genov, D. A.; Bartal, G.; Zhang, X. Nature 2008, 455, (7211), 376-379. 18. Mueller, J. B.; Rubin, N. A.; Devlin, R. C.; Groever, B.; Capasso, F. Phys. Rev. Lett. 2017, 118, (11), 113901. 19. Plum, E.; Zhou, J.; Dong, J.; Fedotov, V.; Koschny, T.; Soukoulis, C.; Zheludev, N. Phys. Rev. B 2009, 79, (3), 035407. 20. Krishnamoorthy, H. N.; Jacob, Z.; Narimanov, E.; Kretzschmar, I.; Menon, V. M. Science 2012, 336, (6078), 205-209. 21. Arbabi, A.; Horie, Y.; Ball, A. J.; Bagheri, M.; Faraon, A. Nat. Commun. 2015, 6, 8069. 22. Arbabi, A.; Horie, Y.; Bagheri, M.; Faraon, A. Nat. Nanotechnol. 2015, 10, (11), 937-943. 23. Chen, W. T.; Khorasaninejad, M.; Zhu, A. Y.; Oh, J.; Devlin, R. C.; Zaidi, A.; Capasso, F. Light: Sci. Appl. 2016, 14. 24. Lin, D.; Fan, P.; Hasman, E.; Brongersma, M. L. Science 2014, 345, (6194), 298-302. 25. Rogers, E. T.; Lindberg, J.; Roy, T.; Savo, S.; Chad, J. E.; Dennis, M. R.; Zheludev, N. I. Nat. Mater. 2012, 11, (5), 432-435. 26. Wood, B.; Pendry, J.; Tsai, D. Phys. Rev. B 2006, 74, (11), 115116. 27. Arbabi, A.; Arbabi, E.; Kamali, S. M.; Horie, Y.; Han, S.; Faraon, A. Nat. Commun. 2016, 7, 13682. 28. Khorasaninejad, M.; Chen, W. T.; Devlin, R. C.; Oh, J.; Zhu, A. Y.; Capasso, F. Science 2016, 352, (6290), 1190-1194. 29. Khorasaninejad, M.; Chen, W. T.; Oh, J.; Capasso, F. Nano Lett. 2016, 16, (6), 3732-3737. 30. Kingslake, R., A history of the photographic lens. Elsevier: 1989. 31. Buralli, D. A.; Morris, G. M. Appl. Opt. 1989, 28, (18), 3950-3959. 32. Berry, M. V. J. Mod. Opt. 1987, 34, (11), 1401-1407. 33. Pancharatnam, S. S. Proc. Indian Acad. Sci. 1956, 44, (5), 247-262. 34. Bociort, F. Encyclopedia Of Optical Engineering 2003, 2, 1843-1850. 35. Devlin, R. C.; Khorasaninejad, M.; Chen, W. T.; Oh, J.; Capasso, F. Proc. Natl. Acad. Sci. 2016, 113, (38), 10473-10478. 10

ACS Paragon Plus Environment

Page 10 of 23

Page 11 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

36. Johnson, T. J., Method for making replica contour block masters for producing schmidt corrector plates. 1974. 37. Johnson, T. J., Method for making schmidt corrector lenses. 1975. 38. Thorlabs Super Apochromatic Mircoscope Objectives. https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=9895 (June 18th 2017), 39. Geary, J. M., Introduction to Lens Design. 2002. 40. Stone, T.; George, N. Applied Optics 1988, 27, (14), 2960-2971. 41. Faklis, D.; Morris, G. M. Appl. Opt. 1995, 34, (14), 2462-2468. 42. Sweeney, D. W.; Sommargren, G. E. Appl. Opt. 1995, 34, (14), 2469-2475. 43. Lin, J.; Mueller, J. P. B.; Wang, Q.; Yuan, G.; Antoniou, N.; Yuan, X.-C.; Capasso, F. Science 2013, 340, (6130), 331-334. 44. Aieta, F.; Kats, M. A.; Genevet, P.; Capasso, F. Science 2015, 347, (6228), 1342-1345. 45. Khorasaninejad, M.; Shi, Z.; Zhu, A.; Chen, W. T.; Sanjeev, V.; Capasso, F. Nano Lett. 2017, 17, (3), 1819–1824.

11

ACS Paragon Plus Environment

Nano Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 1. Design, phase profiles and the scanning electron microscope images of meta-lens doublet. (a) A schematic of the meta-lens doublet. The meta-lens doublet comprises two meta-lenses: aperture meta-lens (depicted in orange) and focusing meta-lens (depicted in light blue) patterned on both sides of a 0.5-mmthick glass substrate, each meta-lens consists of an array of nano-fins with different rotation angles. (b-e) Geometric parameters of the nano-fin. The nano-fins are arranged in a hexagonal unit cell. (c-e) Side and top views of the hexagonal unit cell. The nano-fin dimensions are W = 95, L = 250, H = 600 and S = 320 nm. (f) Top-side view SEM micrograph of the focusing meta-lens. Scale bar: 2000 nm. (g) Side-view SEM micrograph at the edge of the focusing meta-lens. Scale bar: 1000 nm. (h) Phase profile of the aperture metalens to correct positive and negative spherical aberrations. (i) A comparison for the phase profile of focusing meta-lens and hyperbolic meta-lens.

12

ACS Paragon Plus Environment

Page 12 of 23

Page 13 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

Figure 2. Ray diagrams for explaining the principle of aberration correction. (a) Ray-diagram of a meta-lens with hyperbolic phase profile showing large aberrations at oblique incidence. (b) Ray-diagram of the focusing meta-lens with phase profile shown in the light blue curve in Fig. 1(i). (c) Ray diagram obtained by adding the aperture meta-lens resulting in diffraction-limited focusing along the focal plane. The insets of (a–c) show the magnified plots near their focal planes. (d) Analog of refractive lenses: The operation of the meta-lens doublet in terms of the correction of spherical aberration is analogous to that of a Schmidt plate combined with a spherical lens. The positive and negative spherical aberrated marginal and chief rays are corrected through the concave and convex curvature of the Schmidt plate.

13

ACS Paragon Plus Environment

Nano Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 3. Focal spot characterization for different angles of incidence (θ) at

Page 14 of 23

= 532 nm. (a) Focal spot

measurement setup. (b-f) Focal spot intensity profile at (b) 0°, (c) 6°, (d) 12°, (e) 18°, (f) 25° incidence angle θ. Scale bar: 1.1 µm. Their FWHMs along the ) direction are shown in (g) in comparison to modeling. (h) Measured Modulation Transfer Function (MTF) curve along ) direction at different incidence angles. Horizontal axis is in units of line pair per mm. A diffraction-limit MTF curve (blue dashed line) is provided as reference.

14

ACS Paragon Plus Environment

Page 15 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

Figure 4. Imaging with the meta-lens doublet for the element 6 in group 7 of 1951 US air force resolution target: 2.2 µm line width and gap. (a) Imaging set-up using meta-lens doublet. The illumination light source is from a laser centered at 532 nm with a bandwidth of 5 nm. (b-h) Images taken by moving the meta-lens doublet 25.4 µm per step with respect to the center of the target. Each movement, Δx, corresponds to an angle θ. Scale bar: 11 µm. The (Δx, θ) from (b) to (h) are (0 µm, 0°), (25.4 µm, 4.11°), (50.8 µm, 8.26°), (76.2 µm, 12.48°), (101.6 µm, 16.83°), (127 µm, 21.33°), and (152.4 µm, 26.05°)

15

ACS Paragon Plus Environment

Nano Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 23

Figure 5. Analysis of the chromatic properties of the meta-lens doublet.(a-f) On-axis imaging at normal incidence with laser center wavelength

= 532 nm and a bandwidth of (a) 5 nm, (b) 10 nm, (c) 20 nm, (d)

40 nm, (e) 70 nm, (f) 100 nm. Scale bar:11 µm. (g-j) On-axis imaging with a laser bandwidth of 5 nm and a center wavelength at (g) 470 nm, (h) 490 nm, (i) 580 nm and (j) 660 nm. Scale bar: 11 µm. (k) MTF for different bandwidths at 532 nm in normal incidence. (l) Chromatic focal length shift of the meta-lens doublet as a function of wavelength. Reference is the designed wavelength

= 532 nm. (m) MTF for different laser

center wavelengths with a 5 nm bandwidth.

16

ACS Paragon Plus Environment

Page 17 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

TOC Figure

17

ACS Paragon Plus Environment

Nano Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

a

y

b

z

Page 18 of 23

g

f

x

c TiO2

H

d

W

SiO2

h

L

e α

S/2

i

ACS Paragon Plus Environment

Page 19 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Nano Letters

c

b

a







12.5°

12.5°

12.5°

25°

25°

25°

d

ACS Paragon Plus Environment

Nano Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

a

tube lens

linear polarizer fiber-coupled collimator

Page 20 of 23

λ/4

meta-lens doublet

objective

Laser

b

g

c

e

d

f

h

M

ACS Paragon Plus Environment

camera

Page 21 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Nano Letters

a

linear polarizer λ/4

meta-lens 1951 USAF doublet test pattern

condenser

e

b

camera

c



d

M

f

g

ACS Paragon Plus Environment

h

Nano Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

a

g

k

b

c

d

h

Page 22 of 23

i

j

m

l

ACS Paragon Plus Environment

f

e

Page 23 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Nano Letters

ACS Paragon Plus Environment