Microplastics and Nanoplastics in Aquatic Environments: Aggregation

stored in landfills,11 often under poorly managed conditions that can result in release to. 211 soils. Not surprisingly, MPs and synthetic polymer fib...
1 downloads 12 Views 1MB Size
Subscriber access provided by Gothenburg University Library

Critical Review

Microplastics and Nanoplastics in Aquatic Environments: Aggregation, Deposition, and Enhanced Contaminant Transport Olubukola Alimi, Jeffrey Farner Budarz, Laura M Hernandez, and Nathalie Tufenkji Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.7b05559 • Publication Date (Web): 21 Dec 2017 Downloaded from http://pubs.acs.org on December 22, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 58

Environmental Science & Technology

1 2 3 4 5

Microplastics and Nanoplastics in Aquatic

6

Environments: Aggregation, Deposition, and Enhanced

7

Contaminant Transport

8 9 10

Olubukola S Alimi, Jeffrey Farner Budarz, Laura M Hernandez, Nathalie

11

Tufenkji*

12

Department of Chemical Engineering, McGill University,

13

Montreal, Quebec, Canada H3A 0C5

14 15 16 17 18 19

*

Corresponding Author. Phone: (514) 398-2999; Fax: (514) 398-6678; E-mail: [email protected]

20

ACS Paragon Plus Environment

Environmental Science & Technology

21

Abstract

22

Plastic litter is widely acknowledged as a global environmental threat and poor

23

management and disposal lead to increasing levels in the environment. Of recent concern

24

is the degradation of plastics from macro- to micro- and even to nanosized particles

25

smaller than 100 nm in size. At the nanoscale, plastics are difficult to detect and can be

26

transported in air, soil and water compartments. While the impact of plastic debris on

27

marine and fresh waters and organisms has been studied, the loads, transformations,

28

transport, and fate of plastics in terrestrial and subsurface environments are largely

29

overlooked. In this review, we first present estimated loads of plastics in different

30

environmental compartments. We also provide a critical review of the current knowledge

31

vis-à-vis nanoplastic (NP) and microplastic (MP) aggregation, deposition, and

32

contaminant co-transport in the environment. Important factors that affect aggregation

33

and deposition in natural subsurface environments are identified and critically analyzed.

34

Factors affecting contaminant sorption onto plastic debris are discussed, and we show

35

how polyethylene generally exhibits a greater sorption capacity than other plastic types.

36

Finally, we highlight key knowledge gaps that need to be addressed to improve our

37

ability to predict the risks associated with these ubiquitous contaminants in the

38

environment by understanding their mobility, aggregation behavior and their potential to

39

enhance the transport of other pollutants.

40

ACS Paragon Plus Environment

Page 2 of 58

Page 3 of 58

Environmental Science & Technology

41

1.0 Introduction

42

Currently, the global production of plastics exceeds 320 million tons (Mt) per year,1 with

43

production expected to double in the next 20 years.2 Of this, only 6-14% is recycled,

44

meaning up to 86% ends up either in landfills (21–42%) or released into the environment

45

due to mismanagement through a variety of pathways (Figure 1).2-6 Indeed, with the

46

widespread use of different plastics, the current era has been referred to as the

47

Plasticene.7 Plastic debris has been detected in air,8 oceans,5, 9, 10 soils,11-13 sediments,14, 15

48

and surface waters worldwide.16 It is estimated that in Europe and North America, the

49

amount of microplastics (MPs) transferred every year from wastewater treatment plants

50

(WWTPs) to agricultural soils as biosolids is greater than the total burden of MPs

51

currently present in ocean water.3

52

Plastics are produced through the polymerization of various monomers and additives

53

resulting in a spectrum of characteristics such as polarity and “glassiness”.17, 18 These

54

differences in composition will impact their affinity for other pollutants and potential

55

risks associated with them.19 The most commonly detected plastics in the environment

56

are polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), polyethylene

57

terephthalate (PET) and polystyrene (PS).20

58

The presence of MPs in the environment had been largely overlooked until recently;

59

however, the number of studies is now growing rapidly due to the global ubiquity of

60

plastic and its potential threat to human health and biota. Large plastic debris breaks

61

down to form macroplastics (herein defined as >25 mm in size), mesoplastics (5-25 mm),

ACS Paragon Plus Environment

Environmental Science & Technology

62

MPs (