Multilayered Polymer-Coated Carbon Nanotubes To Deliver Dasatinib

Dec 2, 2013 - Multilayered Polymer-Coated Carbon Nanotubes To Deliver. Dasatinib. Thomas L. Moore, Stuart W. Grimes, Robert L. Lewis, and Frank Alexis...
0 downloads 0 Views 4MB Size
Article pubs.acs.org/molecularpharmaceutics

Multilayered Polymer-Coated Carbon Nanotubes To Deliver Dasatinib Thomas L. Moore, Stuart W. Grimes, Robert L. Lewis, and Frank Alexis* Department of Bioengineering, Clemson University, Clemson, South Carolina 29634, United States ABSTRACT: Multilayered, multifunctional polymer coatings were grafted onto carbon nanotubes (CNTs) using a one-pot, ring-opening polymerization in order to control the release kinetic and therapeutic efficacy of dasatinib. Biocompatible, biodegradable multilayered coatings composed of poly(glycolide) (PGA) and poly(lactide) (PLA) were polymerized directly onto hydroxyl-functionalized CNT surfaces. Sequential addition of monomers into the reaction vessel enabled multilayered coatings of PLA-PGA or PGA-PLA. Poly(ethylene glycol) capped the polymer chain ends, resulting in a multifunctional amphiphilic coating. Multilayer polymer coatings on CNTs enabled control of the anticancer drug dasatinib’s release kinetics and enhanced the in vitro therapeutic efficacy against U-87 glioblastoma compared to monolayer polymer coatings. KEYWORDS: multilayered polymer coatings, carbon nanotube, synthesis, encapsulation



INTRODUCTION Nanoparticles have been the subject of significant research as a methodology for controlled drug delivery. Nanoparticles offer distinct advantages over conventional systemic drug delivery by localizing the drug at the tumor site through passive tumor uptake or active molecular targeting, maintaining drug concentrations at the tumor via controlled release, and increasing intracellular delivery via cellular uptake. Furthermore, polymeric nanoparticles are in clinical trials as therapeutic vectors in cancer therapy.1,2 However, monolayer nanoparticles generally exhibit an initial nonideal “burst” release which limits the delivery of drug for prolonged periods.3,4 Here we report multilayered polymer-coated carbon nanotubes (CNTs) that facilitates drug loading, controls drug release, and improves therapeutic efficacy in vitro against U-87 glioblastoma. A one-pot room temperature ring-opening polymerization approach was used to functionalize CNTs with multiple polymer layers composed of poly(glycolide) (PGA), poly(lactide) (PLA), and poly(ethylene glycol) (PEG). Multilayered particles offer a solution to impart better control over drug release characteristics when compared to single layer particles. Loo, Lee, and Widjaja reported multilayered microparticles composed of PGA, PLA, PLGA, poly(caprolactone) (PCL), poly(styrene) (PS), and poly(ethylene-co-vinyl acetate) (EVA) that controlled the release of the model drugs ibuprofen, metoclopramide HCl, and lidocaine.5−8 Multilayered particles were fabricated via an emulsion solvent evaporation method resulting in an EVA core, with PS, PLA, and PLGA shells. These particles not only altered the release kinetics, but the polymer layers exhibited spatial separation of drug loading within distinct layers. While single layered microparticles generally exhibited an initial burst © 2013 American Chemical Society

release, closer to zero-order release kinetics were achieved with the use of multilayered particles. Multilayered microparticles have been previously fabricated using one-step solvent evaporation,7 biomimetic solution polymerization,9 spray draying,10 layer-by-layer assembly,11 and liquid jets with acoustic disruption.12,13 With CNTs as a nanoparticle template, we created a controlled drug delivery system for the anticancer drug dasatinib by polymerizing multiple polymer layers directly onto CNTs. A variety of methods have been developed to functionalize CNTs as mechanisms for delivering drugs.14−17 Liu et al. functionalized CNT surfaces using a phospholipid−PEG molecule, whereby the phospholipid strongly adsorbs to the CNT surface and the PEG improves aqueous dispersion.15,18,19 Drug molecules could be further adsorbed to the CNT surface, or PEG could be modified to attach drugs. Another approach involves the direct conjugation of drug to the CNT surface.20 While not yet in clinical trials, Ensyce Biosciences Inc. is investigating carbon nanotube-based systems for the delivery of siRNA.21 Previously, we have demonstrated that monolayer polymer-coated CNTs can release paclitaxel for one week, improve therapeutic efficacy against U-87 glioblastoma compared to the free drug, and reduced CNT-associated toxicity in vitro and in vivo.17 Here we investigated polymercoated CNTs for the delivery of dasatinib (DAS). Nanoparticle formulations for the delivery of DAS have previously been investigated.22,23 However DAS, an Src/Abl kinase inhibitor, is Received: Revised: Accepted: Published: 276

July 30, 2013 November 26, 2013 December 2, 2013 December 2, 2013 dx.doi.org/10.1021/mp400448w | Mol. Pharmaceutics 2014, 11, 276−282

Molecular Pharmaceutics

Article

Figure 1. Synthesis of multilayered CNTs is achieved with a simple one-pot reaction. At each step monomer is added sequentially polymerize a multilayered block copolymer coating, without washing in between. Isocyanate-terminated PEG reacts with terminal hydroxyl groups to cap the reaction.

thermogravimetric analyzer under nitrogen from 25 to 600 °C at 20 °C/min. Transmission electron microscopy was performed on a Hitachi H7600T at 115 kV. Dasatinib Loading and Release. Dasatinib (DAS) was purchased from LC Laboratories (Woburn, MA). Highperformance liquid chromatography (HPLC) was used to determine the release kinetics of DAS from coated CNTs. DAS was encapsulated by dissolving coated CNTs at 5 mg/mL in a solution of DAS at 1 mg/mL in a 50:50 ACN/dimethyl sulfoxide (DMSO) solution. This CNT/DAS solution was then dropped at a 1:2 ratio in HyPure water and stirred for 2 h, and DAS was encapsulated via solvent evaporation. Samples were washed three times in HyPure water via centrifugation through a 100 kD MWCO centrifugal filter unit. To measure total drug loading content, CNTs were immediately lyophilized after washing. DAS-loaded CNTs were dissolved in a 50:50 ACN/ DMSO solution to extract the drug from the CNTs, and CNTs were removed through a 0.1 μm polytetrafluoroethylene (PTFE) syringe filter. These solutions with free drug were then lyophilized and prepared for HPLC. To measure release kinetics, DAS-loaded CNTs were redispersed in HyPure water and added to the top of a 3.5 kD Slide-a-Lyzer MINI dialysis unit. Each dialysis unit was placed in a 1.5 mL microcentrifuge tube containing HyPure water. Five repeats per formulation were used, and samples were stored at 37 °C. At each time point dialysate was removed and frozen, and fresh HyPure water was replaced. Lyophilized aliquots were analyzed via HPLC on a Waters 1525 Binary HPLC pump with a 2998 photodiode array detector. An Alltima C18 column (4.6 × 25 mm, 5 μm) was used with mobile phase of 50:50 solution of ACN and 0.4% (v/v) triethylamine (TEA) in water. The mobile phase flow rate was 0.8 mL/min, and DAS was detected at a wavelength of 280 nm with an average elution time of 7.5 min. Cell Culture and Controlled Release Therapeutic Efficacy. U-87 glioblastoma and Eagle’s minimum essential medium (EMEM) were purchased from American Type Culture Collection (Manassas, VA). Fetal bovine serium (FBS) was purchased from Atlanta Biologicals (Lawrenceville, GA). U-87 glioblastoma cells were grown in EMEM supplemented with 10% FBS and 1% penicillin−streptomycin. Cells were subcultured at 35 °C and 5% CO2. To test DAS efficacy in vitro, U-87 cells were seeded at 10 000 cells/well in a 96-well plate. To measure the cell viability of polymer-coated CNTs, CNT-PLA-PEG, CNT-PGA-PEG, and CNT-PGA-PLAPEG were dispersed at 5 mg/mL in ACN. CNT solutions were then dropped at a 1:2 ratio in sterile HyPure water and stirred for 2 h. CNTs were then washed as previously described, twice in sterile HyPure water and once in sterile phosphate buffered

administered as an oral formulation.24−26 The solubility of DAS plays a significant role in its oral bioavailability, and the solubility of DAS is highly dependent on pH.27 At an acidic pH of 2.6, DAS is soluble at approximately 18 mg/mL. This solubility drops steeply at a milder pH of 7 to