Nanodiamonds Produced from Low-Grade Indian Coals - ACS

Oct 4, 2017 - Coal is considered to be an abundantly available cheap feedstock for the fabrication of carbon nanomaterials. In this Letter, a report o...
4 downloads 12 Views 6MB Size
Subscriber access provided by UNIVERSITY OF CONNECTICUT

Letter

Nanodiamonds produced from low-grade Indian coals Tonkeswar Das, and Binoy K Saikia ACS Sustainable Chem. Eng., Just Accepted Manuscript • DOI: 10.1021/ acssuschemeng.7b02500 • Publication Date (Web): 04 Oct 2017 Downloaded from http://pubs.acs.org on October 6, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Sustainable Chemistry & Engineering is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 23

ACS Sustainable Chemistry & Engineering

1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nanodiamonds produced from low-grade Indian coals Tonkeswar Das, Binoy K Saikia* Polymer Petroleum and Coal Chemistry Group, Materials Science and Technology Division, CSIR-North East Institute of Science & Technology, Jorhat-785006, India *Corresponding author: [email protected]; [email protected]

ABSTRACT The coal is considered to be an abundantly available cheap feedstock for the fabrication of carbon nanomaterials. In this short communication, a report on the formation of nanodiamond from low-grade coals during low-power ultrasonic-assisted stimulation in Hydrogen Peroxide (H2O2) followed by dialysis in 1 KDa is given. The High Resolution-Transmission Electron Microscopy (HR-TEM), X-ray diffraction (XRD), Raman Spectroscopy, Ultraviolet-visible spectroscopy (UV-Vis), Fluorescence (FL), and Fourier Transform infrared (FT-IR) spectroscopy analyses revealed the formation of carbon nanocrystals of monocrystalline and polycrystalline form with multiple plans. The nominal size of the carbon nanocrystals are found to be in the range of 4-15 nm. The planar spacing of the crystal lattice fingers is in the range of 2.0-2.3Å and are in good agreement with the lattice planes of various diamond phases including cubic diamond and lonsdaleite. The present work significantly contributes an additional synthetic methodology of nanodiamond production by using the cheap low-grade coal feedstock. The nanodiamond formed shows bright blue fluorescence under UV-light with excitation dependent and

holding

promising

application

in

bioimaging

engineering,

photo-voltaics,

and

optoelectronics.

KEYWORDS Low-grade coals, ultrasonic-assisted stimulation, nanodiamonds, blue fluorescence, value addition to low-grade coal

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

Page 2 of 23

2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

INTRODUCTION After the first man-made bulk synthetic method discovered in 1955,1-2 nanodiamonds have reemerged as an intensive research interest in recent years due to their combination of outstanding mechanical performance, chemical resistance, versatile surface chemistry, bio-compatibility, and unique optical and electric properties.3 Nanodiamonds are reported to be less toxic than the other nanomaterials4-7 and have emerged as a key platform for nanoscience and nanotechnology developments.8 It has been found to possess a wide range of application in the field of microelectronics, optoelectronics, and biosensing.4 In addition, nanodiamonds are also used in novel wear-resistant polymers, metal coatings,8,9 and lubricant additives10 due to their superhardness, exceptional chemical resistivity, and abrasive nature, respectively. Nanodiamonds have been widely used in bio-medical imaging, drug delivery, and other areas of medicine.4-7 Although a number of different methods exist for the synthesis of nanodiamonds particles,11-17 only high-pressure and high-temperature (top-down) and detonation (bottom-up) methods are available on an industrial scale. However, there is always a sustainable demand for a “golden standard” to produce a universal nanodiamond for its versatile applications in industrial, commercial, or academic purposes.3 In the “high-pressure high-temperature (HPHT)”and detonation methods, high pressure (tens of thousands of atmospheres) and high temperature (more than 2000K) with the aid of explosive materials (TNT, RDX, etc.) have been used for the production of nanodiamonds. However, highly sophisticated equipment is needed and it is not economically viable worldwide to supply industrial diamonds via this route. Khachatryan et al. 18 reported that the use of high-power ultrasound is an innovative alternative for the synthesis of micro- and nano-diamonds and very efficient instead of using HPHT and detonation methods. In

ACS Paragon Plus Environment

Page 3 of 23

ACS Sustainable Chemistry & Engineering

3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

their method, however, they used pure graphite as a carbon source and expensive organic solvent as a liquid media for the synthesis of nanodiamonds. Recently, Lueking et al. 19 reported the formation of nanocrystalline diamond (NCD) as a byproduct during the hydrogenative ball milling of anthracite coal with cyclohexene for the production and storage of hydrogen. Additionally, in the year of 2007, Lueking and her coworkers20 reported the formation of nanocrystalline diamond (NCD) after reactive ball milling of anthracite coal with cyclohexene, a high-temperature (1400ºC) thermal anneal, and 4M HCl treatment followed by 10 M NaOH treatment. Sun et al.

21

reported the recrystallization of the

carbon network into diamonds when the anthracite coal functionalized with dodecyl groups was irradiated with electron beam. In an another work, Xiao et al.

22

reported the synthesis of

nanodiamonds from anthracite (Vietnam), bitumen (Indonesia), and coke (China) by laser ablation technique in a liquid at atmospheric pressure and temperature. However, the productions of nanodiamonds with purity, size selectivity, de-aggregation, surface functionality, and photoluminescence have remained a challenging task.22 The coal is being considered as an abundantly available cheap feedstock for the fabrication of carbon nanomaterials and several researchers reported the same, including for the production of Carbon nanotubes,23-39 Microballs,40 Carbon nanodots,41-46 Onion-like fullerenes,47-49 and Graphene/graphene oxide.50-55 In some of the previous studies, the formation of carbon nanotubes, nanoballs,56 onion-like fullerenes, and chemically-converted graphene-like carbon nanosheets from Northeast Indian low-grade coal has been reported.49 The North-east region (NER) of India has around 1.496 Gt of low-grade coal reserves. These Tertiary coals have high-sulfur contents (2-8%), where 75-90% is organically bound,

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

Page 4 of 23

4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

while the rest is in inorganic forms viz. sulfate sulfur and pyritic sulfur.49,56,57 Thus, the NER coals need beneficiation as well as value addition for further gainful utilization. In this letter, the discovery of the formation of some typical nanodiamond suspensions, formed during low-power ultrasound-assisted exfoliation of Northeast Indian low-grade coals is reported. In our investigation, we used low-power ultrasound and low-grade coals as carbon source instead of high-power ultrasound and graphite as carbon source as reported by Khachatryan et al..18 We had also not used any high grade coal (i.e. anthracite coal) as reported by Lueking et al. 19,20 and Sun et al..21 Although, several researchers58-61 along with our previous studies, 62, 63 reported the sulfur and mineral matter removal of different types of coals by using ultrasound-assisted methods, but the formation of nanodiamond was not reported in those experiments. The main novelty of our investigation is that the carbon source is from low-grade coal feedstock, which is typically different and cheap from other carbon sources. As compared to the pure sp2-carbon such as graphite and high grade coal, the exfoliation of the small graphitelike crystalline domains that are inherent in low-grade coal is reported to be easy.41-43

EXPERIMENTAL 20-g of low-grade coal sample was mixed with 100 ml of H2O2 in a Teflon beaker and subsequently exposed to an ultrasound treatment at a frequency of 20 kHz in a Ultrasonic Processor (Sonapros; Model: PR-1000 M) at atmospheric pressure for 3h. A sensor was placed in the reaction mixture to measure the reaction temperature. Then, the mixture of coal and H2O2 was filtered. The detailed methodology being adopted was well-described in our previous study.57 The H2O2 was used to remove the sulfur components as well as the mineral matters from the coals. The chemical characteristics of the feed as well as the residual coals were reported in

ACS Paragon Plus Environment

Page 5 of 23

ACS Sustainable Chemistry & Engineering

5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

our previous study.57 The filtrate part obtained after ultrasonication was poured into a beaker containing 500-ml crushed ice and then neutralized. The neutral mixture was then filtered through a 0.22-µm polytetrafluoroethylene membrane and dialyzed in a 1kDa dialysis bag for five days. The dialyzed solution was concentrated using rotary evaporation and collected. One drop of the solution was pipetted onto a carbon support film on a copper grid and characterized by transmission electron microscopy (TEM/HR-TEM) (HR-TEM; Joel JEM-2100, resolution: 1.9Å to 1.4Å, accelerating voltage: 60–200 KV in 50 V steps). The TEM images were further developed by using the “Image J” program (software version 1.47). An X-ray diffraction spectrum was obtained using an X-ray powder Diffractometer (type: JDX-11P3A, JEOL: Japan). X-ray diffraction data was obtained with the starting angle of 2.00º, a stoping angle of 75.00º, and a step size of 0.05º with a scanning rate of 1º per minute with a Co (l ¼ 1.7902 Å) beam. The Raman analysis was performed on a Laser micro-Raman system (Make: Horiba JobinVyon, Model LabRam HR). Ultraviolet-visible (UV-Vis) and Fluorescence (FL) spectra were recorded in an UV-visible spectrophotometer (Analytikjena, SPECORD-200, Germany) and F-2700 FL spectrophotometer (2423-008) respectively. Fourier transform infrared (FT-IR) spectrum was recorded in transmittance mode with 4 cm-1 spectral resolution using FT-IR spectrophotometer (IR Affinity-1, Shimadzu, Japan) and IR solution software.

RESULTS AND DISCUSSION During the detailed electron beam analysis (TEM/HRTEM), un-agglomerated, uniformly sized carbon nanoparticle with a crystalline phase (Figures 1a, b), as confirmed by the selected area electron diffraction (SAED) pattern (inset Figure 1b), were observed. The chemical composition was assessed by energy-dispersive spectroscopy (ΣIGMA-Field Emission Scanning Microscope,

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

Page 6 of 23

6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Carl Zeiss Microscopy) as depicted in Figure 1c, which shows that the particles mainly consist of carbon and free from impurities. The nominal size of the carbon nanocrystal was found to be between 2.5-5.5 nm. Figures 1e-h show the typical HR-TEM images of some large-size carbon nanocrystal. The nanocrystal particles are found to be monocrystalline and polycrystalline in nature with multiple twins. The nominal sizes of the carbon nanocrystals were found to be 15 nm (Figure 1e), 6 nm (Figure 1f), 10 nm (Figure 1g), and 4 nm (Figure 1h). The planner spacing of the crystal lattice fingers was measured to be in the range of 2.0-2.3Å (Figure 2a-d), which is in good agreement with the lattice planes of various diamond phases including cubic diamond (111) (2.06Å), lonsdaleite (002) (2.06Å), and lonsdaleite (100) (2.18Å) as reported elsewhere.35 These measurements indicate that the carbon nanocrystals are considered to be nanodiamonds, rather than common graphite quantum dots. Some amorphous carbons also exist as nanocrystals form. The nanocrystal particles also tend to form agglomerates and formed multiple and twin plans (Figure 2a). From the Fast Fourier Transform images (FFT; see insets of Fig. 2a-d), it is observed that the particles are hexagonal (Figure 2a-b) and have an ordered (Figure 2c-d) crystalline structure. The nanodiamonds structure obtained in our study is similar to the nanodiamonds structure reported elsewhere.19-22 Figures 3a-b demonstrate the XRD and Raman spectra of the nanodiamond suspension produced. The XRD pattern demonstrates a broad peak based at 26.7º, which indicates that the nanodiamonds embedded within an amorphous carbon matrix and the introduction of abundant oxygen containing functional groups.

19-22

The Raman spectra (Figure 3b) shows mainly two

characteristic bands appearing at 1600 cm-1 and 1350 cm-1. These two peaks are near the position of G-band and D-band for sp2 hybridized carbon frame work in 2D hexagonal lattice of graphite

ACS Paragon Plus Environment

Page 7 of 23

ACS Sustainable Chemistry & Engineering

7 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

cluster and lattice defect including the sp3 hybridized carbon. Diamond exhibits well known Raman scattering peak at 1333cm-1.19-22 However, such sort of peak was not observed in the Raman spectra nanodiamond produced, which might be because of the way that the sp3 hybridized carbon such as diamond has a much smaller intensity (~1/50th) in contrast with sp2 hybridized carbons in visible Raman excitation.

19-22

Thus the presence of sp2 carbons is higher

in the product as observed in the Raman analysis and expected to shield the observation of any characteristic sp3 peaks (diamonds). In addition, if the diamond content is less than ~ 25%, it will not be evident in UV-Raman until graphite is removed by oxidation. 19-22 Thus, the removal of graphite is warranted in the future research plan to get the characteristic Raman scattering peak of the as-synthesized nanodiamonds phase. The upshifting of G-band appearing at 1600 cm-1 corresponds to the presence of O-H surface functional groups.22 Ultrasonic energy is a promising tool to produce nanodiamonds.18,64 It is also a very effective tool for the ultrasonic dispersion, de-agglomerating, and functionalizing of the synthesized nanodiamonds. The formation mechanism of the nanodiamonds was someway hypothesized to be the mechanism as described elsewhere.49,56,62,65 However, in the present case, ultrasound energy is used, which locally creates very extreme effects and ultrasonic cavitation. During the formation of ultrasonic cavitation, very high temperatures (approx.5000K) and pressures (approx. 2000atm) are reached locally, which may be the initiation point for the formation of nanodiamonds.18,64 The low-grade Northeast Indian coals were reported to have graphite-like polyaromatic structures

46

, and the irregular and polyaromatic hydrocarbon in the

coal are joined by very weak links and separated during the ultrasonication. The polyaromatic hydrocarbon fragments were then further broken into C2 carbon units and may finally lead to the formation of the nanodiamonds via. polymorphic reaction. The formation of the nanodiamonds

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

Page 8 of 23

8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

was also hypothesized based on the nanothermodynamic theory of metastable phase nucleation and growth materials at the nanometer size as reported by Wang and Yang.66 The hydrogen present in the feed coals also play a significant role in the formation of nanodiamonds as reported elsewhere.19-21 From the electron beam studies, interestingly, it was observed that the ultrasonicated filtrate contains some typical nanocrystals with nanodiamond phases. Another interesting property of the filtrate is its bright blue fluorescence under UV-light (at 365nm), which can easily be seen, even in a diluted colloidal solution (Figure 3c). Thus, the nanodiamonds are thought to be more suitable for in-vivo bio imaging applications due to the less toxic effect than the other carbon nanoparticles.4,5,6 Therefore, the special feature of fluorescence behaviors of the observed typical nanodiamonds present in the filtrate is an important goal to understand the presence of diamond cores and optically active defect centers for practical applications, especially in the field of biomedical imaging. Figure 3d shows the UV-visible absorption spectra of the filtrate containing nanodiamonds. The bands appear at around 250-350 nm are due to the excitation of pi-electrons (π→π*) of the aromatic π system, while a shoulder at 300nm attributes to the n-π* transition of C=O bonds or other connected group. The broad absorption with a gradual change up to long wavelength indicates the existence of band tails due to defect states. Figure 3e shows the FL spectra of the filtrate containing typical nanodiamonds. The FL properties of the filtrate are found to be excitation dependent, which is similar to the reports on the fluorescence of nanodiamonds.65 The maximum intensity of the FL emission wavelength was found to be in the blue regions and red-shifted to green and yellow regions with increasing excitation wavelength, which is a special feature of nanodiamonds. It is also observed that the Stokes shift trends

ACS Paragon Plus Environment

Page 9 of 23

ACS Sustainable Chemistry & Engineering

9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

linearly to zero with increasing the excitation wavelength, which suggests that the FL properties of the filtrate containing nanodiamonds is driven by the mechanism of size-induced quantumconfinement effect. It is also believed that the red-shift phenomena occurred due the presence of a multiple chromophore/fluorophore system with aromatic and oxidation groups. To know the various types of surface functional groups which affect the FL properties of observed nanodiamonds, the FTIR spectroscopic analysis of the filtrate part containing nanodiamonds and unconverted carbon was examined (see Figure 3f). A broad absorption peak was observed at around 3400 cm-1and is due to the stretching vibrations of O-H bonds. The sharp absorption peaks observed at around 1600 and 1725 cm-1 are due to the C=C and C=O groups, respectively. The intensities of the peaks for O-H groups are found to be predominant over C=O groups. Therefore, the emission exhibits blue fluorescence, as reported elsewhere.65

CONCLUSIONS In summary, the observations suggest that the high-value nanodiamonds could be easily prepared from low-value coal feedstock by using ultrasonic-assisted wet-chemical method in the presence of H2O2. The nanodiamond particles formed show stable and bright blue fluorescence, which holds promise for application in bioimaging engineering, photo-voltaics, and optoelectronics. The process might also be an alternative process for large-scale production of nanodiamonds from abundantly available cheap coal feedstock at a lower cost instead of the drastic and expensive methods available. However, the detail analysis of the structural features and relevant characteristic that opens diverse applications will be a subject of our future studies.

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

Page 10 of 23

10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACKNOWLEDGMENTS The authors are grateful to the Director, CSIR-NEIST for his constant encouragement during the research work. We express our special thanks to Prof. Michael Hochella, Dr. Jim Hower, Prof. Frans Waanders, and Prof. Birinchi Kumar Das (Department of Chemistry, Gauhati University) for their valuable comments, suggestion and encouragements to our research work. The constructive comments received from the anonymous reviewers are highly acknowledged. The financial assistance from CSIR-New Delhi is duly acknowledged (OLP-2003-WP-3).

ACS Paragon Plus Environment

Page 11 of 23

ACS Sustainable Chemistry & Engineering

11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

REFERENCES (1)

Volkov, K.V.; Danilenko, V.V.; Elin, V. L. Diamond synthesis from detonation carbon. Fiz. Goren. Vzryva, 1990, 26 (3), 123-125.

(2)

Howard, T. H.; Diamond Synthesis 2947608, 1955.

(3)

Nunn, N.; Torelli, M.; McGuire, G.; Shenderova, O. Nanodiamond: A high impact nanomaterial.Current Opinion in Solid State and Materials Science. 2017, 21 (1), 1-9.

(4)

Schrand, A. M. Safety of Nanoparticles from Manufacturing to Medical Applications. In Nanostructure Science and Technology, Webster, T. J. Ed; Springer, 2009a, 159–187.

(5)

Schrand, A. M.; Hens, S. A. C.; Shenderova, O. A. Nanodiamond particles: Properties and perspectives for bioapplications. Crit. Rev. Solid State Mater. Sci. 2009b, 34, 18–74.

(6)

Schrand, A. M.; Huang, H.; Carlson, C.; Schlager, J. J.; Oh sawa, E.; Hussain, S. M.; Dai, L. Are diamond nanoparticles cytotoxic? J. Phys. Chem. 2007, B111, 2–7.

(7)

Mochanlin, V.N.; Shenderova, O.; Ho, D.; Gogotsi, Y. The properties and applications of nanodiamonds. Nat. Nanotechnol. 2012, 7(1), 11-23.

(8)

Mochalin, V. N.; Gogotsi, Y.; Nanodiamond–polymer composites. Diamond Related Mater. 2015, 58, 161–171.

(9)

Dolmatov, V. Y. Detonation nanodiamonds: synthesis, structure, properties and applications. Usp. Khim. 2007, 76(4), 376–397.

(10)

Shenderova, O.; Vargas, A.; Turner, S.; Ivanov, D.M.; Ivanov, M.G. Nanodiamond-based nanolubricants: investigation of friction surfaces. Tribol. Trans. 2014, 57(6), 1051–1057.

(11)

Volkov, K.V.; Danilenko, V. V.; Elin, V. I. Diamond synthesis from detonation carbon. Fiz. Goren. Vzryva. 1990, 26, 123.

(12)

Yang, G. W.; Wang, J. B.; Liu, Q. X. Preparation of nano-crystalline diamonds using pulsed laser induced reactive quenching. J. Phys. Condens. Mat. 1998, 10, 7923-7927.

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

Page 12 of 23

12 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(13)

Kumar, A.; Lin, P. A.; Xue, A.; Hao B.; Yap, Y. K.; Sankaran, R. M. Formation of nanodiamonds at near-ambient conditions via microplasma dissociation of ethanol vapour. Nat. Commun. 2013, 5, doi:10.1038/ncomms3618.

(14)

Welz, S.; Gogotsi, Y.; McNallan, M. J. Nucleation, growth and graphitization of diamond nanocrystals during chlorination of carbides. J. Appl. Phys. 2003, 93, 4207, doi: http://dx.doi.org/10.1063/1.1558227.

(15)

Daulton, T. L.; Kirk, M. A.; Lewis, R. S.; Rehn, L. E. Production of nanodiamonds by high-energy ion irradiation of graphite at room temperature. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 2001, 175–177, 12-20.

(16)

Banhart, F.; Ajayan, P. M. Carbon onions as nanoscopic pressure cells for diamond formation. Nature. 1996, 382, 433-435.

(17)

Galimov, E.; Kudin, A. M.; Skorobogatskii, V. N.; Plotnichenko, V. G.; Bondarev, O. L.; Zarubin, B. G.; Strazdovskii, V. V.; Aronin, A. S.; Fisenko, A. V.; Bykov, I. V.; Barinov, A. Yu. Experimental corroboration of the synthesis of diamond in the cavitation process. Dokl. Phys. 2004, 49, 150-153.

(18)

Khachatryan, A. Kh.; Aloyan, S.G.; May, P.W.; Sargsyan, R.; Khachatryan, V.A.; Baghdasaryan, V.S. Graphite-to-diamond transformation induced by ultrasound cavitation. Diamond & Related Materials. 2008, 17, 931–936.

(19)

Lueking A.D.; Gutierrez, H.R.; Gutierrez, Fonseca, D. A.; Narayanan, D.L.; Essendelft, D. Van; Jain P.; Clifford C.E.B. Combined Hydrogen Production and Storage with Subsequent Carbon Crystallization. J. Am. Chem. Soc. 2006, 128, 7758-7760.

ACS Paragon Plus Environment

Page 13 of 23

ACS Sustainable Chemistry & Engineering

13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(20)

Lueking A.D.; Gutierrez H.R., Jain P.; Essandelft D.T.Van; Burgess-Clifford C.E. The effect of HCl and NaOH treatment on structural transformations in a ball-milled anthracite after thermal and chemical processing. Carbon. 2007, 45, 2297–2306.

(21)

Sun ,Y.; Kvashnin, A.G.; Sorokin, P. B.; Yakobson, B.I.; Billups, W. E. RadiationInduced Nucleation of Diamond from Amorphous Carbon: Effect of Hydrogen. J. Phys. Chem. Lett. 2014, 5, 1924−1928.

(22)

Xiao, J.; Liu, P.; Yang, G. W. Nanodiamonds from coal at ambient conditions. Nanoscale. 2015a, 7, 6114-6125.

(23)

Qiu, J.; An, Y.; Zhao, Z.; Li Y.; Zhou Y. Catalytic synthesis of single walled carbon nanotubes from coal gas by chemical vapour deposition methods. Fuel Processing Technology. 2004a, 85, 913–920.

(24)

Qiu, J.; Li, Y.; Wang, Y.; Wu, F.; Cheng, H.; Zheng, G.; Uchiyama, Y. Large scale synthesis of high quality double-walled carbon nanotubes from coal-based carbon rods in vacuum by arc discharge. Preprints of Papers-American Chemical Society, Division of Fuel Chemistry. 2004b, 49 (2), 874.

(25)

Qiu, J.; Wang, Z.; Zhao, Z.; Wang, T. Synthesis of double-walled carbon nanotubes from coal in hydrogen free atmosphere. Fuel. 2007, 86, 282–286.

(26)

Qui, J. S.; Zhang, F.; Zhou, Y.; Han, H.M.; Hu, D.S.; Tsang S.C.; Harris, P.J.F. Carbon nanomaterials from eleven caking coals. Fuel. 2002, 81, 1509–1514.

(27)

Velasco-Santos, C.; Martinez-Hernandez, A.L.; Consultchi, A.; Rodriguez, R.; Castano, V.M. Naturally produced carbon nanotubes. Chemical Physics Letters. 2003, 373, 272– 276.

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

Page 14 of 23

14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(28)

Yu, J.; Lucas, J.; Strezov, V.; Wall, T. Coal and carbon nanotube production. Fuel. 2003, 82, 2025–2032.

(29)

Tian, Y.; Zhang, Y.; Wang, B.; Ji, W.; Zhang, Y.; Xie, K. Coal-derived carbon nanotubes by thermal plasma jet. Carbon. 2004, 42, 2597–2601.

(30)

Wang, Z.; Zhao, Z.; Qiu, J. Synthesis of branched carbon nanotubes from coal. Carbon. 2006, 44, 1321–1324.

(31)

Dosodia, A.; Lal, C.; Singh B.P.; Mathur, R.B.; Sharma D.K. Development of catalyst free carbon nanotubes from coal and waste plastics. Fullerenes Nanotubes and Carbon Nanotubes. 2009, 17, 567–582.

(32)

Aqel, A.; El-Nour, K. M. M.; Ammar, R. A. A.; Al-Warthan, A. Carbon nanotubes, science and technology part (I) structure, synthesis and characterization. Arabian Journal of Chemistry. 2012, 5, 1–23.

(33)

Zelenskii, O. I.; Shmal'ko, V. M.; Udovitskii, V. G.; Kropotov, A. Yu. Production of carbon nanostructures by the atomization of solid coking products within an electric arc. Coke and Chemistry. 2012, 55(2), 76–81.

(34)

Awasthi, S.; Awasthi, K.; Ghosh, A.K.; Srivastava, S.K.; Srivastava, O.N. Formation of single and multi-walled carbon nanotubes and graphene from Indian bituminous coal. Fuel. 2015, 147, 35–42.

(35)

Kumar, R.; Singh, R. K.; Ghosh, A. K.; Sen, R.; Srivastava, S. K.; Tiwari, R. S. Srivastava, O. N. Synthesis of coal-derived single-walled carbon nanotube from coal by varying the ratio of Zr/Ni as bimetallic catalyst. J Nanopart Res. 2013, 15:1406. DOI 10.1007/s11051-012-1406-3.

ACS Paragon Plus Environment

Page 15 of 23

ACS Sustainable Chemistry & Engineering

15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(36)

Li, Y. F.; Qiu, J.S.; Zhao, Z.B.; Wang, T.H.; Wang, Y.P.; Li, W. Bamboo-shaped carbon tubes from coal. Chemical Physics Letters. 2002, 366, 544–550.

(37)

Mathur, R. B.; Lal, C.; Sharma, D. K. Catalyst-Free Carbon Nanotubes from Coal-Based Material. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. 2007, 29(1), 21-27. DOI: 10.1080/009083190910334.

(38)

Moothi, K.; Simate, G. S.; Falcon, R.; Iyuke, S. E.; Meyyappan, M. Carbon Nanotube Synthesis Using Coal Pyrolysis. Langmuir. 2015, 31, 9464−9472.

(39)

Pang, L. S. K.; Wilson, M. A. Nanotubes from coal. Energy Fuels. 1993, 7(3), 436–437.

(40)

Qiu, J.; Li, Y.; Wang, Y.; Liang, C.; Wang, T.; Wang, D. A novel form of carbon microballs from coal. Carbon. 2003, 41, 767–772.

(41)

Ye, R.; Xiang, C.; Lin, J.; Peng, Z.; Huang, K.; Yan, Z.; Cook, N. P.; Samuel, E. L.G.; Hwang, C.C.; Ruan, G.; Ceriotti, G.; Raji, A. R. O.; Martí, A.A.; Tour, J. M. Coal as an abundant source of graphene quantum dots. Nature Communications. 2013, 4, doi:10.1038/ncomms3943.

(42)

Dong, Y.; Lin, J.; Chen, Y.; Fu, F.; Chi, Y.; Chena, G. Graphene quantum dots, graphene oxide, carbon quantum dots and graphite nanocrystals in coals. Nanoscale. 2014, 6, 74107415.

(43)

Ye, R.; Peng, Z.; Metzger, A.; Lin, J.; Mann, J.A.; Huang, K.; Xiang, C.; Fan, X.; Samuel E. L. G.; Alemany, L.B.; Martí, A. A.; Tour, J. M. Bandgap Engineering of Coal-Derived Graphene Quantum Dots. ACS Appl. Mater. Interfaces. 2015, 7(12), 7041–7048.

(44)

Fei, H.; Ye, R.; Ye, G.; Gong, Y.; Peng, Z.; Fan X.; Samuel, E. L. G.; Ajayan, P. M.; Tour J.M.

Boron-

and

Nitrogen-Doped

Graphene

Quantum

ACS Paragon Plus Environment

Dots/Graphene

Hybrid

ACS Sustainable Chemistry & Engineering

Page 16 of 23

16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nanoplatelets as Efficient Electrocatalysts for Oxygen Reduction. ACS Nano. 2014, 8(10), 10837–10843. (45)

Huang, Y.; Bai, C.; Cao, K.; Tian, Y.; Luo, Y.; Xia, C.; Ding, S.; Jin Y.; Ma, L.; Li S. Chaos to order: an eco-friendly way to synthesize graphene quantum dots. RSC Adv. 2014, 4, 43160-43165.

(46)

Hua, Y.; Yanga, J.; Jiaa, L.; Yua, J. S. Ethanol in aqueous hydrogen peroxide solution: Hydrothermal synthesis of highly photoluminescent carbon dots as multifunctional nanosensors. 2015, 93, 999-1007.

(47)

Du, A.B.; Liua, X.-G.; Fub, D.-J.; Hanb, P.-D.; Xu, B.-S. Onion-like fullerenes synthesis from coal. Fuel. 2007, 86(1–2), 294-298.

(48)

Weston, A.; Murthy, M.; Lalvani, S. Synthesis of fullerenes from coal. Fuel Processing Technology. 1995, 45(3), 203-212.

(49)

Das, T.; Boruah, P. K.; Das, M. R.; Saikia. B. K. Formation of onion-like fullerene and chemically converted graphene-like nanosheets from low-quality coals: application in photocatalytic degradation of 2-nitrophenol. RSC Adv. 2016, 6, 35177-35190.

(50)

Wang, D.; Vijapur, S. H.; Botte, G. G. Coal Char Derived Few-Layer Graphene Anodes for Lithium Ion Batteries. Photonics. 2014, 1, 251-259. doi: 10.3390/photonics1030251.

(51)

Pakhira, B.; Ghosh, S.; Maity, S.; Sangeetha, D. N.; Laha, A.; Allamb, A.; Sarkar, S. Extraction of Preformed Graphene Oxide from Coal: Its Clenched Fist Form Entrapping Large Molecules. RSC Adv. 2015, 5, 89076-89082.

(52)

Powell, C.; Beall, G. W. Graphene oxide and graphene from low grade coal: synthesis, characterization and applications. Current Opinion in Colloid & Interface Science. 2015, 20, 362-366.

ACS Paragon Plus Environment

Page 17 of 23

ACS Sustainable Chemistry & Engineering

17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(53)

Vijapur, S. H.; Wang, D.; Botte, G. G. Raw Coal Derived Large Area and Transparent Graphene Films. ECS Solid State Letters. 2013, 2(7), M45-M47.

(54)

Zhou, Q.; Zhao, Z.; Zhang, Y.; Meng, B.; Zhou, A.; Qiu, J. Graphene Sheets from Graphitized Anthracite Coal: Preparation, Decoration, and Application. Energy Fuels. 2012, 26, 5186−5192.

(55)

He, X.; Zhang, H.; Zhang, H.; Li X.; Xiao, N.; Qiu, J. Direct synthesis of 3D hollow porous graphene balls from coal tar pitch for high performance Supercapacitors. J. Mater. Chem. A. 2014, 2, 19633–19640.

(56)

Das, T.; Saikia, B.K.; Baruah, B.P. Formation of carbon nano-balls and carbon nano-tubes from northeast Indian Tertiary coal: Value added products from low grade coal. Gondwana Research. 2016, 31, 295-304.

(57)

Saikia, B. K.; Dutta, A. M.; Baruah, B. P. Feasibility studies of de-sulfurization and deashing of low grade medium to high sulfur coals by low energy ultrasonication. Fuel. 2014a, 123, 12-18.

(58)

Zaidi, S. A. H. “Application of sonic energy to caustic cleaning of coals”. Fuel Process Technol. 1997, 53, 31-39.

(59)

Ze, K. W.; Xin, X. H.; Tao, C. J. “Study of enhanced fine coal desulfurization and deashing by ultrasonic floatation. J Chin Univ Min Technol. 2007, 17, 358–362.

(60)

Mello, P. A.; Duartea, F. A.; Nunesa, M.A.G.; Alencarb, M. S.; Moreirab, E. M.; Kornc, M.; Dresslera, V. L.; Flore, É.M.M. Ultrasound-assisted oxidative process for sulfur removal from petroleum product feedstock. UltrasonSonochem. 2009, 16, 732–6.

(61)

Nagarjan, R. “Investigation of high-frequency, high intensity ultrasonic for size reduction and washing of coal”. 2008, BHEL RBIC Project Final Report.

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

Page 18 of 23

18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(62)

Saikia, B. K.; Dutta, A.M.; Saikia, L.; Ahmed, S.; Baruah, B. P. Ultrasonic assisted cleaning of high sulphur Indian coals in water and mixed alkali. Fuel Processing Technology. 2014b, 123, 107-113.

(63)

Saikia, B. K.; Dalmora, A.C.; Choudhurya, R.; Das, T.; Taffarel, S. R.; Silva, L.F.O. Effective removal of sulfur components from Brazilian power-coals by ultrasonication (40 kHz) in presence of H2O2. UltrasonicsSonochemistry. 2016, 32, 147–157.

(64)

Wang, Y.; Hu, A.; Carbon quantum dots: synthesis, properties and applications. J. Mater.Chem. 2014, C2, 6921–6939.

(65)

Xiao, J.; Liu, P.; Li, L.; Yang, G.; Fluorescence Origin of Nanodiamonds. J. Phys. Chem. 2015b, C119, 2239−2248.

(66)

Wang, C.X.; Yang, G.W. Thermodynamics of metastable phase nucleation at the nanoscale. Materials Science and Engineering R. 2005, 49, 157–202.

ACS Paragon Plus Environment

Page 19 of 23

ACS Sustainable Chemistry & Engineering

19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 1. TEM/ HRTEM images of the nanocrystal formed from coal; (a,b) un-agglomerated carbon nanoparticles (c) energy-dispersive spectroscopy of carbon nanoparticle, mainly consist of carbon; (d) size distribution of the carbon nanoparticles; (e-h) HR-TEM images of some largesize carbon nanocrystal having the size of 4-15 nm.

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

Page 20 of 23

20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

a

b

c

d

Figure 2. (a) HRTEM images of the nanocrystal with polycrystalline and monocrystalline domains. Insets are FFT patterns showing the crystalline hexagonal patterns. Planner spacing of the crystal lattice fingers was measured to be 0.2-0.21 nm. (b) HRTEM images of the nanocrystal with polycrystallineand monocrystalline domains as highlighted by arrow and circles, respectively. Insets are FFT patterns; shows crystalline hexagonal patterns. Planar spacing of the crystal lattice fingers was measured to be 0.203nm. (c) HRTEM images of the nanocrystal with monocrystalline domains as highlighted by hexagon. Insets are FFT patterns of highlighted domains. Planar spacing of the crystal lattice fingers was measured to be 0.201nm. (d) HRTEM images of the nanocrystal with monocrystalline domains as highlighted by circle. Insets are FFT patterns of highlighted area. Planar spacing of the crystal lattice fingers was measured to be 0.230nm.

ACS Paragon Plus Environment

Page 21 of 23

ACS Sustainable Chemistry & Engineering

21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

a

b

c

d

e

f

Figure 3. (a) XRD pattern; (b) Raman analysis; (a) blue fluorescence under UV-lamp (at 365nm); (b) UV-visible spectra of the nanodiamond; (c) FL spectra of the nanodiamonds showing excitation dependence (d) FTIR spectra of the nanodiamonds showing C–O, C=O and O–H vibration modes.

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

Page 22 of 23

22 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

For Table of Contents Use Only TOC GRAPHIC:

SYNOPSIS: Formation of Nanodiamonds with blue fluorescence ultrasonication of low-grade coals leading to their sustainable utilization.

ACS Paragon Plus Environment

after

low-power

Page 23 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

264x146mm (96 x 96 DPI)

ACS Paragon Plus Environment